- 03 Aug, 2014 16 commits
-
-
Alexey Khoroshilov authored
There is a couple of places in client code where returned value of try_module_get() is ignored. As a result there is a small chance to premature unload module because of unbalanced refcounting. The patch adds error handling in that places. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com>
-
Weston Andros Adamson authored
Signed-off-by:
Weston Andros Adamson <dros@primarydata.com> Signed-off-by:
-
Weston Andros Adamson authored
This is useful when lsegs need to be released while holding locks. Signed-off-by:
-
Weston Andros Adamson authored
nfs_page_find_head_request_locked looks through the regular nfs commit lists when the page is swapped out, but doesn't look through the pnfs commit lists. I'm not sure if anyone has hit any issues caused by this. Suggested-by:
Peng Tao <tao.peng@primarydata.com> Signed-off-by:
-
Weston Andros Adamson authored
Fix the comment in nfs_page.h for PG_INODE_REF to reflect that it's no longer set only on head requests. Also add a WARN_ON_ONCE in nfs_inode_remove_request as PG_INODE_REF should always be set. Suggested-by:
-
Weston Andros Adamson authored
Return errors from wait_on_bit_lock from nfs_page_group_lock. Add a bool argument @wait to nfs_page_group_lock. If true, loop over wait_on_bit_lock until it returns cleanly. If false, return the error from wait_on_bit_lock. Signed-off-by:
-
Jeff Layton authored
It's always 0. Signed-off-by:
Jeff Layton <jlayton@primarydata.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Jeff Layton authored
Fix the endianness handling in gss_wrap_kerberos_v1 and drop the memset call there in favor of setting the filler bytes directly. In gss_wrap_kerberos_v2, get rid of the "ec" variable which is always zero, and drop the endianness conversion of 0. Sparse handles 0 as a special case, so it's not necessary. Signed-off-by:
-
Jeff Layton authored
Use u16 pointer in setup_token and setup_token_v2. None of the fields are actually handled as __be16, so this simplifies the code a bit. Also get rid of some unneeded pointer increments. Signed-off-by:
-
Jeff Layton authored
The handling of the gc_ctx pointer only seems to be partially RCU-safe. The assignment and freeing are done using RCU, but many places in the code seem to dereference that pointer without proper RCU safeguards. Fix them to use rcu_dereference and to rcu_read_lock/unlock, and to properly handle the case where the pointer is NULL. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by:
-
Jeff Layton authored
Commit 5b22216e (nfs: __rcu annotations) added a __rcu annotation to the gc_gss_ctx field. I see no rationale for adding that though, as that field does not seem to be managed via RCU at all. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by:
-
NeilBrown authored
If you have an NFSv4 mounted directory which does not container 'foo' and: ls -l foo ssh $server touch foo cat foo then the 'cat' will fail (usually, depending a bit on the various cache ages). This is correct as negative looks are cached by default. However with the same initial conditions: cat foo ssh $server touch foo cat foo will usually succeed. This is because an "open" does not add a negative dentry to the dcache, while a "lookup" does. This can have negative performance effects. When "gcc" searches for an include file, it will try to "open" the file in every director in the search path. Without caching of negative "open" results, this generates much more traffic to the server than it should (or than NFSv3 does). The root of the problem is that _nfs4_open_and_get_state() will call d_add_unique() on a positive result, but not on a negative result. Compare with nfs_lookup() which calls d_materialise_unique on both a positive result and on ENOENT. This patch adds a call d_add() in the ENOENT case for _nfs4_open_and_get_state() and also calls nfs_set_verifier(). With it, many fewer "open" requests for known-non-existent files are sent to the server. Signed-off-by:
NeilBrown <neilb@suse.de> Signed-off-by:
-
Andrey Utkin authored
There was a check for result being not NULL. But get_acl() may return NULL, or ERR_PTR, or actual pointer. The purpose of the function where current change is done is to "list ACLs only when they are available", so any error condition of get_acl() mustn't be elevated, and returning 0 there is still valid. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=81111Signed-off-by:
Andrey Utkin <andrey.krieger.utkin@gmail.com> Reviewed-by:
-
git://git.linux-nfs.org/projects/anna/nfs-rdmaTrond Myklebust authored
* 'nfs-rdma' of git://git.linux-nfs.org/projects/anna/nfs-rdma: (916 commits) xprtrdma: Handle additional connection events xprtrdma: Remove RPCRDMA_PERSISTENT_REGISTRATION macro xprtrdma: Make rpcrdma_ep_disconnect() return void xprtrdma: Schedule reply tasklet once per upcall xprtrdma: Allocate each struct rpcrdma_mw separately xprtrdma: Rename frmr_wr xprtrdma: Disable completions for LOCAL_INV Work Requests xprtrdma: Disable completions for FAST_REG_MR Work Requests xprtrdma: Don't post a LOCAL_INV in rpcrdma_register_frmr_external() xprtrdma: Reset FRMRs after a flushed LOCAL_INV Work Request xprtrdma: Reset FRMRs when FAST_REG_MR is flushed by a disconnect xprtrdma: Properly handle exhaustion of the rb_mws list xprtrdma: Chain together all MWs in same buffer pool xprtrdma: Back off rkey when FAST_REG_MR fails xprtrdma: Unclutter struct rpcrdma_mr_seg xprtrdma: Don't invalidate FRMRs if registration fails xprtrdma: On disconnect, don't ignore pending CQEs xprtrdma: Update rkeys after transport reconnect xprtrdma: Limit data payload size for ALLPHYSICAL xprtrdma: Protect ia->ri_id when unmapping/invalidating MRs ...
-
Trond Myklebust authored
This may be used to limit the number of cached credentials building up inside the access cache. Signed-off-by: -
Trond Myklebust authored
In some cases where the credentials are not often reused, we may want to limit their total number just in order to make the negative lookups in the hash table more manageable. Signed-off-by:
-
- 31 Jul, 2014 21 commits
-
-
Chuck Lever authored
Commit 38ca83a5 added RDMA_CM_EVENT_TIMEWAIT_EXIT. But that status is relevant only for consumers that re-use their QPs on new connections. xprtrdma creates a fresh QP on reconnection, so that event should be explicitly ignored. Squelch the alarming "unexpected CM event" message. Signed-off-by:
Chuck Lever <chuck.lever@oracle.com> Tested-by:
Steve Wise <swise@opengridcomputing.com> Tested-by:
Shirley Ma <shirley.ma@oracle.com> Tested-by:
Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by:
Anna Schumaker <Anna.Schumaker@Netapp.com>
-
Chuck Lever authored
Clean up. RPCRDMA_PERSISTENT_REGISTRATION was a compile-time switch between RPCRDMA_REGISTER mode and RPCRDMA_ALLPHYSICAL mode. Since RPCRDMA_REGISTER has been removed, there's no need for the extra conditional compilation. Signed-off-by:
-
Chuck Lever authored
Clean up: The return code is used only for dprintk's that are already redundant. Signed-off-by:
-
Chuck Lever authored
Minor optimization: grab rpcrdma_tk_lock_g and disable hard IRQs just once after clearing the receive completion queue. Signed-off-by:
-
Chuck Lever authored
Currently rpcrdma_buffer_create() allocates struct rpcrdma_mw's as a single contiguous area of memory. It amounts to quite a bit of memory, and there's no requirement for these to be carved from a single piece of contiguous memory. Signed-off-by:
-
Chuck Lever authored
Clean up: Name frmr_wr after the opcode of the Work Request, consistent with the send and local invalidation paths. Signed-off-by:
-
Chuck Lever authored
Instead of relying on a completion to change the state of an FRMR to FRMR_IS_INVALID, set it in advance. If an error occurs, a completion will fire anyway and mark the FRMR FRMR_IS_STALE. Signed-off-by:
-
Chuck Lever authored
Instead of relying on a completion to change the state of an FRMR to FRMR_IS_VALID, set it in advance. If an error occurs, a completion will fire anyway and mark the FRMR FRMR_IS_STALE. Signed-off-by:
-
Chuck Lever authored
Any FRMR arriving in rpcrdma_register_frmr_external() is now guaranteed to be either invalid, or to be targeted by a queued LOCAL_INV that will invalidate it before the adapter processes the FAST_REG_MR being built here. The problem with current arrangement of chaining a LOCAL_INV to the FAST_REG_MR is that if the transport is not connected, the LOCAL_INV is flushed and the FAST_REG_MR is flushed. This leaves the FRMR valid with the old rkey. But rpcrdma_register_frmr_external() has already bumped the in-memory rkey. Next time through rpcrdma_register_frmr_external(), a LOCAL_INV and FAST_REG_MR is attempted again because the FRMR is still valid. But the rkey no longer matches the hardware's rkey, and a memory management operation error occurs. Signed-off-by:
-
Chuck Lever authored
When a LOCAL_INV Work Request is flushed, it leaves an FRMR in the VALID state. This FRMR can be returned by rpcrdma_buffer_get(), and must be knocked down in rpcrdma_register_frmr_external() before it can be re-used. Instead, capture these in rpcrdma_buffer_get(), and reset them. Signed-off-by:
-
Chuck Lever authored
FAST_REG_MR Work Requests update a Memory Region's rkey. Rkey's are used to block unwanted access to the memory controlled by an MR. The rkey is passed to the receiver (the NFS server, in our case), and is also used by xprtrdma to invalidate the MR when the RPC is complete. When a FAST_REG_MR Work Request is flushed after a transport disconnect, xprtrdma cannot tell whether the WR actually hit the adapter or not. So it is indeterminant at that point whether the existing rkey is still valid. After the transport connection is re-established, the next FAST_REG_MR or LOCAL_INV Work Request against that MR can sometimes fail because the rkey value does not match what xprtrdma expects. The only reliable way to recover in this case is to deregister and register the MR before it is used again. These operations can be done only in a process context, so handle it in the transport connect worker. Signed-off-by:
-
Chuck Lever authored
If the rb_mws list is exhausted, clean up and return NULL so that call_allocate() will delay and try again. Signed-off-by:
-
Chuck Lever authored
During connection loss recovery, need to visit every MW in a buffer pool. Any MW that is in use by an RPC will not be on the rb_mws list. Signed-off-by:
-
Chuck Lever authored
If posting a FAST_REG_MR Work Reqeust fails, revert the rkey update to avoid subsequent IB_WC_MW_BIND_ERR completions. Suggested-by:
-
Chuck Lever authored
Clean ups: - make it obvious that the rl_mw field is a pointer -- allocated separately, not as part of struct rpcrdma_mr_seg - promote "struct {} frmr;" to a named type - promote the state enum to a named type - name the MW state field the same way other fields in rpcrdma_mw are named Signed-off-by: -
Chuck Lever authored
If FRMR registration fails, it's likely to transition the QP to the error state. Or, registration may have failed because the QP is _already_ in ERROR. Thus calling rpcrdma_deregister_external() in rpcrdma_create_chunks() is useless in FRMR mode: the LOCAL_INVs just get flushed. It is safe to leave existing registrations: when FRMR registration is tried again, rpcrdma_register_frmr_external() checks if each FRMR is already/still VALID, and knocks it down first if it is. Signed-off-by:
-
Chuck Lever authored
xprtrdma is currently throwing away queued completions during a reconnect. RPC replies posted just before connection loss, or successful completions that change the state of an FRMR, can be missed. Signed-off-by:
-
Chuck Lever authored
Various reports of: rpcrdma_qp_async_error_upcall: QP error 3 on device mlx4_0 ep ffff8800bfd3e848 Ensure that rkeys in already-marshalled RPC/RDMA headers are refreshed after the QP has been replaced by a reconnect. BugLink: https://bugzilla.linux-nfs.org/show_bug.cgi?id=249Suggested-by:
Selvin Xavier <Selvin.Xavier@Emulex.Com> Signed-off-by:
-
Chuck Lever authored
When the client uses physical memory registration, each page in the payload gets its own array entry in the RPC/RDMA header's chunk list. Therefore, don't advertise a maximum payload size that would require more array entries than can fit in the RPC buffer where RPC/RDMA headers are built. BugLink: https://bugzilla.linux-nfs.org/show_bug.cgi?id=248Signed-off-by:
-
Chuck Lever authored
Ensure ia->ri_id remains valid while invoking dma_unmap_page() or posting LOCAL_INV during a transport reconnect. Otherwise, ia->ri_id->device or ia->ri_id->qp is NULL, which triggers a panic. BugLink: https://bugzilla.linux-nfs.org/show_bug.cgi?id=259 Fixes: ec62f40d 'xprtrdma: Ensure ia->ri_id->qp is not NULL when reconnecting' Signed-off-by:
-
Chuck Lever authored
seg1->mr_nsegs is not yet initialized when it is used to unmap segments during an error exit. Use the same unmapping logic for all error exits. "if (frmr_wr.wr.fast_reg.length < len) {" used to be a BUG_ON check. The broken code will never be executed under normal operation. Fixes: c977dea2 (xprtrdma: Remove BUG_ON() call sites) Signed-off-by:
-
- 22 Jul, 2014 1 commit
-
-
Yan Burman authored
Fix the following warning when DMA-API debug is enabled by checking ib_dma_map_single result: [ 1455.345548] ------------[ cut here ]------------ [ 1455.346863] WARNING: CPU: 3 PID: 3929 at /home/yanb/kernel/net-next/lib/dma-debug.c:1140 check_unmap+0x4e5/0x990() [ 1455.349350] mlx4_core 0000:00:07.0: DMA-API: device driver failed to check map error[device address=0x000000007c9f2090] [size=2656 bytes] [mapped as single] [ 1455.349350] Modules linked in: xprtrdma netconsole configfs nfsv3 nfs_acl ib_ipoib rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm autofs4 auth_rpcgss oid_registry nfsv4 nfs fscache lockd sunrpc dm_mirror dm_region_hash dm_log microcode pcspkr mlx4_ib ib_sa ib_mad ib_core ib_addr mlx4_en ipv6 ptp pps_core vxlan mlx4_core virtio_balloon cirrus ttm drm_kms_helper drm sysimgblt sysfillrect syscopyarea i2c_piix4 i2c_core button ext3 jbd virtio_blk virtio_net virtio_pci virtio_ring virtio uhci_hcd ata_generic ata_piix libata [ 1455.349350] CPU: 3 PID: 3929 Comm: mount.nfs Not tainted 3.15.0-rc1-dbg+ #13 [ 1455.349350] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2007 [ 1455.349350] 0000000000000474 ffff880069dcf628 ffffffff8151c341 ffffffff817b69d8 [ 1455.349350] ffff880069dcf678 ffff880069dcf668 ffffffff8105b5fc 0000000069dcf658 [ 1455.349350] ffff880069dcf778 ffff88007b0c9f00 ffffffff8255ec40 0000000000000a60 [ 1455.349350] Call Trace: [ 1455.349350] [<ffffffff8151c341>] dump_stack+0x52/0x81 [ 1455.349350] [<ffffffff8105b5fc>] warn_slowpath_common+0x8c/0xc0 [ 1455.349350] [<ffffffff8105b6e6>] warn_slowpath_fmt+0x46/0x50 [ 1455.349350] [<ffffffff812e6305>] check_unmap+0x4e5/0x990 [ 1455.349350] [<ffffffff81521fb0>] ? _raw_spin_unlock_irq+0x30/0x60 [ 1455.349350] [<ffffffff812e6a0a>] debug_dma_unmap_page+0x5a/0x60 [ 1455.349350] [<ffffffffa0389583>] rpcrdma_deregister_internal+0xb3/0xd0 [xprtrdma] [ 1455.349350] [<ffffffffa038a639>] rpcrdma_buffer_destroy+0x69/0x170 [xprtrdma] [ 1455.349350] [<ffffffffa03872ff>] xprt_rdma_destroy+0x3f/0xb0 [xprtrdma] [ 1455.349350] [<ffffffffa04a95ff>] xprt_destroy+0x6f/0x80 [sunrpc] [ 1455.349350] [<ffffffffa04a9625>] xprt_put+0x15/0x20 [sunrpc] [ 1455.349350] [<ffffffffa04a899a>] rpc_free_client+0x8a/0xe0 [sunrpc] [ 1455.349350] [<ffffffffa04a8a58>] rpc_release_client+0x68/0xa0 [sunrpc] [ 1455.349350] [<ffffffffa04a9060>] rpc_shutdown_client+0xb0/0xc0 [sunrpc] [ 1455.349350] [<ffffffffa04a8f5d>] ? rpc_ping+0x5d/0x70 [sunrpc] [ 1455.349350] [<ffffffffa04a91ab>] rpc_create_xprt+0xbb/0xd0 [sunrpc] [ 1455.349350] [<ffffffffa04a9273>] rpc_create+0xb3/0x160 [sunrpc] [ 1455.349350] [<ffffffff81129749>] ? __probe_kernel_read+0x69/0xb0 [ 1455.349350] [<ffffffffa053851c>] nfs_create_rpc_client+0xdc/0x100 [nfs] [ 1455.349350] [<ffffffffa0538cfa>] nfs_init_client+0x3a/0x90 [nfs] [ 1455.349350] [<ffffffffa05391c8>] nfs_get_client+0x478/0x5b0 [nfs] [ 1455.349350] [<ffffffffa0538e50>] ? nfs_get_client+0x100/0x5b0 [nfs] [ 1455.349350] [<ffffffff81172c6d>] ? kmem_cache_alloc_trace+0x24d/0x260 [ 1455.349350] [<ffffffffa05393f3>] nfs_create_server+0xf3/0x4c0 [nfs] [ 1455.349350] [<ffffffffa0545ff0>] ? nfs_request_mount+0xf0/0x1a0 [nfs] [ 1455.349350] [<ffffffffa031c0c3>] nfs3_create_server+0x13/0x30 [nfsv3] [ 1455.349350] [<ffffffffa0546293>] nfs_try_mount+0x1f3/0x230 [nfs] [ 1455.349350] [<ffffffff8108ea21>] ? get_parent_ip+0x11/0x50 [ 1455.349350] [<ffffffff812d6343>] ? __this_cpu_preempt_check+0x13/0x20 [ 1455.349350] [<ffffffff810d632b>] ? try_module_get+0x6b/0x190 [ 1455.349350] [<ffffffffa05449f7>] nfs_fs_mount+0x187/0x9d0 [nfs] [ 1455.349350] [<ffffffffa0545940>] ? nfs_clone_super+0x140/0x140 [nfs] [ 1455.349350] [<ffffffffa0543b20>] ? nfs_auth_info_match+0x40/0x40 [nfs] [ 1455.349350] [<ffffffff8117e360>] mount_fs+0x20/0xe0 [ 1455.349350] [<ffffffff811a1c16>] vfs_kern_mount+0x76/0x160 [ 1455.349350] [<ffffffff811a29a8>] do_mount+0x428/0xae0 [ 1455.349350] [<ffffffff811a30f0>] SyS_mount+0x90/0xe0 [ 1455.349350] [<ffffffff8152af52>] system_call_fastpath+0x16/0x1b [ 1455.349350] ---[ end trace f1f31572972e211d ]--- Signed-off-by:
Yan Burman <yanb@mellanox.com> Reviewed-by:
-
- 21 Jul, 2014 2 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull more IIO driver fixes from Greg KH: "Here are two IIO driver fixes for 3.16-rc6 that resolve some reported issues" * tag 'staging-3.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: iio: mma8452: Use correct acceleration units. iio:core: Handle error when mask type is not separate
-
