- 27 Sep, 2012 14 commits
-
-
Jussi Kivilinna authored
cast5/avx incorrectly XORs new IV over old IV at end of CBC encryption function when it should store. This causes CBC encryption to give incorrect output on multi-page encryption requests. Signed-off-by:
Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au>
-
Jussi Kivilinna authored
Add missing tests for ctr(camellia), lrw(camellia), xts(camellia) and ghash, as these have test vectors available. Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Jussi Kivilinna authored
Currrently test_aead uses same buffer for destination and source. However in any places, 'dst != src' take different path than 'dst == src' case. Therefore make test_aead also run tests with destination buffer being different than source buffer. Signed-off-by:
-
Jussi Kivilinna authored
Currrently test_skcipher uses same buffer for destination and source. However in any places, 'dst != src' take different path than 'dst == src' case. Therefore make test_skcipher also run tests with destination buffer being different than source buffer. Signed-off-by:
-
Jussi Kivilinna authored
More precisely, test 'long word' and 'long long word' overflow and carry handling. Signed-off-by:
-
Jussi Kivilinna authored
Signed-off-by:
-
Jussi Kivilinna authored
Allow non-multi page and multi page skcipher tests to be run on same test template, to avoid duplicating data. Signed-off-by:
-
Kim Phillips authored
we need to configure the TRNG to use more clocks per sample to handle the two back-to-back 64KiB random descriptor requests on higher frequency P5040s. Signed-off-by:
Kim Phillips <kim.phillips@freescale.com> Signed-off-by:
-
Suresh Siddha authored
Ran into this while looking at some new crypto code using FPU hitting a WARN_ON_ONCE(!irq_fpu_usable()) in the kernel_fpu_begin() on a x86 kernel that uses the new eagerfpu model. In short, current eagerfpu changes return 0 for interrupted_kernel_fpu_idle() and the in_interrupt() thinks it is in the interrupt context because of the local_bh_disable(). Thus resulting in the WARN_ON(). Remove the local_bh_disable/enable() calls around the existing local_irq_disable/enable() calls. local_irq_disable/enable() already disables the BH. [ If there are any other legitimate users calling kernel_fpu_begin() from the process context but with BH disabled, then we can look into fixing the irq_fpu_usable() in future. ] Signed-off-by:
Suresh Siddha <suresh.b.siddha@intel.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by:
-
Peter Senna Tschudin authored
Convert a nonnegative error return code to a negative one, as returned elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by:
Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by:
-
Peter Senna Tschudin authored
Convert a nonnegative error return code to a negative one, as returned elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by:
-
Peter Senna Tschudin authored
Convert a nonnegative error return code to a negative one, as returned elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by:
-
Peter Senna Tschudin authored
Convert a nonnegative error return code to a negative one, as returned elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by:
Arun Murthy <arunrmurthy83@gmail.com> Signed-off-by:
-
Horia Geanta authored
According to SEC v5.0-v5.3 reference manuals. Signed-off-by:
Horia Geanta <horia.geanta@freescale.com> Acked-by:
-
- 06 Sep, 2012 18 commits
-
-
Fabio Estevam authored
In current driver, everytime we need to access the rng clock ,ie to enable or disable it, a call to clk_get is done. This is not correct and the preferred way is to provide a rng data structure that could be used for accessing rng resources. Acked-by:
Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by:
Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by:
-
Fabio Estevam authored
Adapt clocks to the new i.mx clock framework and fix the following warning: ------------[ cut here ]------------ WARNING: at drivers/clk/clk.c:511 __clk_enable+0x9c/0xac() Modules linked in: Backtrace: [<800124c8>] (dump_backtrace+0x0/0x10c) from [<804172dc>] (dump_stack+0x18/0x1c) r7:00000009 r6:000001ff r5:8032cb50 r4:00000000 [<804172c4>] (dump_stack+0x0/0x1c) from [<80021834>] (warn_slowpath_common+0x54) [<800217e0>] (warn_slowpath_common+0x0/0x6c) from [<80021870>] (warn_slowpath_n) r9:80581cac r8:8700a9c0 r7:805ab070 r6:80000013 r5:806133d4 r4:8700a9c0 [<8002184c>] (warn_slowpath_null+0x0/0x2c) from [<8032cb50>] (__clk_enable+0x9c) [<8032cab4>] (__clk_enable+0x0/0xac) from [<8032cb88>] (clk_enable+0x28/0x44) r5:806133d4 r4:8700a9c0 [<8032cb60>] (clk_enable+0x0/0x44) from [<80560f14>] (mxc_rnga_probe+0x68/0x164) r7:805ab070 r6:8706ec00 r5:80611314 r4:00000000 [<80560eac>] (mxc_rnga_probe+0x0/0x164) from [<8025914c>] (platform_drv_probe+0) [<8025912c>] (platform_drv_probe+0x0/0x24) from [<80257c7c>] (driver_probe_devi) [<80257bfc>] (driver_probe_device+0x0/0x204) from [<80257e94>] (__driver_attach) r9:80581cac r8:0000008e r7:00000000 r6:8706ec3c r5:805ab070 r4:8706ec08 [<80257e00>] (__driver_attach+0x0/0x98) from [<8025642c>] (bus_for_each_dev+0x6) r7:00000000 r6:80257e00 r5:87035e98 r4:805ab070 [<802563c4>] (bus_for_each_dev+0x0/0x94) from [<80257adc>] (driver_attach+0x20/) r7:00000000 r6:873f2380 r5:805ab338 r4:805ab070 [<80257abc>] (driver_attach+0x0/0x28) from [<80256d50>] (bus_add_driver+0x18c/0) [<80256bc4>] (bus_add_driver+0x0/0x268) from [<802584c4>] (driver_register+0x80) [<80258444>] (driver_register+0x0/0x134) from [<802594f4>] (platform_driver_reg) r7:00000000 r6:805c2e00 r5:00000007 r4:805ab05c [<802594a8>] (platform_driver_register+0x0/0x60) from [<80259528>] (platform_dr) [<80259508>] (platform_driver_probe+0x0/0xa4) from [<80560ea0>] (mod_init+0x18/) r7:00000000 r6:805c2e00 r5:00000007 r4:87034000 [<80560e88>] (mod_init+0x0/0x24) from [<800086b4>] (do_one_initcall+0x40/0x194) [<80008674>] (do_one_initcall+0x0/0x194) from [<8053d3f4>] (kernel_init+0xfc/0x) [<8053d2f8>] (kernel_init+0x0/0x1cc) from [<80027190>] (do_exit+0x0/0x7ec) ---[ end trace 4198eed02050f461 ]--- Acked-by:
-
Horia Geanta authored
Support for ESNs (extended sequence numbers). Tested with strongswan by connecting back-to-back P1010RDB with P2020RDB. Signed-off-by:
-
Jussi Kivilinna authored
.cra_list initialization is unneeded and have been removed from all other crypto modules except 842. Cc: Robert Jennings <rcj@linux.vnet.ibm.com> Signed-off-by:
Seth Jennings <sjenning@linux.vnet.ibm.com> Signed-off-by:
-
Jussi Kivilinna authored
This reverts commit e6ccc727. Above commit caused performance regression for CAST6. Reverting gives following increase in tcrypt speed tests (revert-vs-old ratios). AMD Phenom II X6 1055T, x86-64: size ecb cbc ctr lrw xts enc dec enc dec enc dec enc dec enc dec 16b 1.15x 1.17x 1.16x 1.17x 1.16x 1.16x 1.14x 1.19x 1.05x 1.07x 64b 1.19x 1.23x 1.20x 1.22x 1.19x 1.19x 1.16x 1.24x 1.12x 1.12x 256b 1.21x 1.24x 1.22x 1.24x 1.20x 1.20x 1.17x 1.21x 1.16x 1.14x 1kb 1.21x 1.25x 1.22x 1.24x 1.21x 1.21x 1.18x 1.22x 1.17x 1.15x 8kb 1.21x 1.25x 1.22x 1.24x 1.21x 1.21x 1.18x 1.22x 1.18x 1.15x Cc: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by:
-
Jussi Kivilinna authored
Fix "symbol 'x' was not declared. Should it be static?" sparse warnings. Signed-off-by:
-
Jussi Kivilinna authored
Fix "symbol 'x' was not declared. Should it be static?" sparse warnings. Signed-off-by:
-
Jussi Kivilinna authored
Fix "constant 0xXXXXXXXXXXXXXXXX is so big it's unsigned long" sparse warnings. Signed-off-by:
-
Jussi Kivilinna authored
Fix "symbol 'x' was not declared. Should it be static?" sparse warnings. Signed-off-by:
-
Jussi Kivilinna authored
Patch replaces 'movb' instructions with 'movzbl' to break false register dependencies, interleaves instructions better for out-of-order scheduling and merges constant 16-bit rotation with round-key variable rotation. tcrypt ECB results: Intel Core i5-2450M: size old-vs-new new-vs-generic old-vs-generic enc dec enc dec enc dec 256 1.13x 1.19x 2.05x 2.17x 1.82x 1.82x 1k 1.18x 1.21x 2.26x 2.33x 1.93x 1.93x 8k 1.19x 1.19x 2.32x 2.33x 1.95x 1.95x [v2] - Do instruction interleaving another way to avoid adding new FPU<=>CPU register moves as these cause performance drop on Bulldozer. - Improvements to round-key variable rotation handling. - Further interleaving improvements for better out-of-order scheduling. Cc: Johannes Goetzfried <Johannes.Goetzfried@informatik.stud.uni-erlangen.de> Signed-off-by: -
Jussi Kivilinna authored
Patch replaces 'movb' instructions with 'movzbl' to break false register dependencies, interleaves instructions better for out-of-order scheduling and merges constant 16-bit rotation with round-key variable rotation. tcrypt ECB results (128bit key): Intel Core i5-2450M: size old-vs-new new-vs-generic old-vs-generic enc dec enc dec enc dec 256 1.18x 1.18x 2.45x 2.47x 2.08x 2.10x 1k 1.20x 1.20x 2.73x 2.73x 2.28x 2.28x 8k 1.20x 1.19x 2.73x 2.73x 2.28x 2.29x [v2] - Do instruction interleaving another way to avoid adding new FPU<=>CPU register moves as these cause performance drop on Bulldozer. - Improvements to round-key variable rotation handling. - Further interleaving improvements for better out-of-order scheduling. Cc: Johannes Goetzfried <Johannes.Goetzfried@informatik.stud.uni-erlangen.de> Signed-off-by: -
Jussi Kivilinna authored
Patch replaces 'movb' instructions with 'movzbl' to break false register dependencies and interleaves instructions better for out-of-order scheduling. Tested on Intel Core i5-2450M and AMD FX-8100. tcrypt ECB results: Intel Core i5-2450M: size old-vs-new new-vs-3way old-vs-3way enc dec enc dec enc dec 256 1.12x 1.13x 1.36x 1.37x 1.21x 1.22x 1k 1.14x 1.14x 1.48x 1.49x 1.29x 1.31x 8k 1.14x 1.14x 1.50x 1.52x 1.32x 1.33x AMD FX-8100: size old-vs-new new-vs-3way old-vs-3way enc dec enc dec enc dec 256 1.10x 1.11x 1.01x 1.01x 0.92x 0.91x 1k 1.11x 1.12x 1.08x 1.07x 0.97x 0.96x 8k 1.11x 1.13x 1.10x 1.08x 0.99x 0.97x [v2] - Do instruction interleaving another way to avoid adding new FPU<=>CPU register moves as these cause performance drop on Bulldozer. - Further interleaving improvements for better out-of-order scheduling. Tested-by:Borislav Petkov <bp@alien8.de> Cc: Johannes Goetzfried <Johannes.Goetzfried@informatik.stud.uni-erlangen.de> Signed-off-by:
-
Sachin Kamat authored
module_pci_driver makes the code simpler by eliminating module_init and module_exit calls. Signed-off-by:
Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by:
-
Wei Yongjun authored
From: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Remove duplicated include. Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by:
-
Kim Phillips authored
use true/false for bool, fix code alignment, and fix two allocs with no test. Signed-off-by:
-
Devendra Naga authored
Signed-off-by:
Devendra Naga <develkernel412222@gmail.com> Acked-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
David McCullough authored
Add assembler versions of AES and SHA1 for ARM platforms. This has provided up to a 50% improvement in IPsec/TCP throughout for tunnels using AES128/SHA1. Platform CPU SPeed Endian Before (bps) After (bps) Improvement IXP425 533 MHz big 11217042 15566294 ~38% KS8695 166 MHz little 3828549 5795373 ~51% Signed-off-by:
David McCullough <ucdevel@gmail.com> Signed-off-by:
-
Kent Yoder authored
Add a MAINTAINERS entry for the IBM Power in-Nest Crypto Acceleators driver. Signed-off-by:
Kent Yoder <key@linux.vnet.ibm.com> Signed-off-by:
-
- 28 Aug, 2012 7 commits
-
-
Horia Geanta authored
Support for ESNs (extended sequence numbers). Tested with strongswan on a P2020RDB back-to-back setup. Extracted from /etc/ipsec.conf: esp=aes-sha1-esn-modp4096! Signed-off-by:
-
Horia Geanta authored
Generate a link table in case assoc data is a scatterlist. While at it, add support for handling non-contiguous assoc data and iv. Signed-off-by:
-
Horia Geanta authored
It's more natural to think of these vars as bool rather than int. Signed-off-by:
-
Horia Geanta authored
talitos_edesc_alloc does not need hash_result param. Checking whether dst scatterlist is NULL or not is all that is required. Signed-off-by:
-
Horia Geanta authored
For IPsec encryption, in the case when: -the input buffer is fragmented (edesc->src_nents > 0) -the output buffer is not fragmented (edesc->dst_nents = 0) the ICV is not output in the link table, but after the encrypted payload. Copying the ICV must be avoided in this case; consequently the condition edesc->dma_len > 0 must be more specific, i.e. must depend on the type of the output buffer - fragmented or not. Testing was performed by modifying testmgr to support src != dst, since currently native kernel IPsec does in-place encryption (src == dst). Signed-off-by:
-
Kim Phillips authored
the entry points and geniv definitions for all aead, ablkcipher, and hash algorithms are all common; move them to a single assignment in talitos_alg_alloc(). This assumes it's ok to assign a setkey() on non-hmac algs. Signed-off-by:
-
Kim Phillips authored
lighten driver_algs[] by moving them to talitos_alg_alloc(). Signed-off-by:
-
- 20 Aug, 2012 1 commit
-
-
Tushar Behera authored
Commit bd3c7b5c ("crypto: atmel - add Atmel AES driver") possibly has a typo error of adding an extra CONFIG_. CC: Nicolas Royer <nicolas@eukrea.com> Signed-off-by:
Tushar Behera <tushar.behera@linaro.org> Signed-off-by:
-
