- 14 Feb, 2020 24 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Fix interrupt name truncation in mv88e6xxx dsa driver, from Andrew Lunn. 2) Process generic XDP even if SKB is cloned, from Toke Høiland-Jørgensen. 3) Fix leak of kernel memory to userspace in smc, from Eric Dumazet. 4) Add some missing netlink attribute validation to matchall and flower, from Davide Caratti. 5) Send icmp responses properly when NAT has been applied to the frame before we get to the tunnel emitting the icmp, from Jason Donenfeld. 6) Make sure there is enough SKB headroom when adding dsa tags for qca and ar9331. From Per Forlin. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (62 commits) netdevice.h: fix all kernel-doc and Sphinx warnings net: dsa: tag_ar9331: Make sure there is headroom for tag net: dsa: tag_qca: Make sure there is headroom for tag net, ip6_tunnel: enhance tunnel locate with link check net/smc: no peer ID in CLC decline for SMCD net/smc: transfer fasync_list in case of fallback net: hns3: fix a copying IPv6 address error in hclge_fd_get_flow_tuples() net: hns3: fix VF bandwidth does not take effect in some case net: hns3: add management table after IMP reset mac80211: fix wrong 160/80+80 MHz setting cfg80211: add missing policy for NL80211_ATTR_STATUS_CODE xfrm: interface: use icmp_ndo_send helper wireguard: device: use icmp_ndo_send helper sunvnet: use icmp_ndo_send helper gtp: use icmp_ndo_send helper icmp: introduce helper for nat'd source address in network device context net/sched: flower: add missing validation of TCA_FLOWER_FLAGS net/sched: matchall: add missing validation of TCA_MATCHALL_FLAGS net/flow_dissector: remove unexist field description page_pool: refill page when alloc.count of pool is zero ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull power management fixes from Rafael Wysocki: "Fix three issues related to the handling of wakeup events signaled through the ACPI SCI while suspended to idle (Rafael Wysocki) and unexport an internal cpufreq variable (Yangtao Li)" * tag 'pm-5.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: PM: s2idle: Prevent spurious SCIs from waking up the system ACPICA: Introduce acpi_any_gpe_status_set() ACPI: PM: s2idle: Avoid possible race related to the EC GPE ACPI: EC: Fix flushing of pending work cpufreq: Make cpufreq_global_kobject static
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "The only common change is the regression fix of the previous PCM fix patch for managed buffers while the rest are usual suspects, USB-audio and HD-audio device-specific quirks. The change for UAC2 clock validation workaround became a bit big, but the changes are fairly straightforward" * tag 'sound-5.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: pcm: Fix double hw_free calls ALSA: usb-audio: Add clock validity quirk for Denon MC7000/MCX8000 ALSA: hda/realtek - Fix silent output on MSI-GL73 ALSA: hda/realtek - Add more codec supported Headset Button ALSA: usb-audio: Apply sample rate quirk for Audioengine D1 ALSA: usb-audio: Fix UAC2/3 effect unit parsing ALSA: usb-audio: Apply 48kHz fixed rate playback for Jabra Evolve 65 headset
-
git://anongit.freedesktop.org/drm/drmLinus Torvalds authored
Pull drm fixes from Dave Airlie: "The core has a build fix for edid code on certain compilers/arches/, one MST fix and one vgem fix. Regular amdgpu fixes, and a couple of small driver fixes. The i915 fixes are bit larger than normal for this stage, but they were having CI issues last week, and they hadn't sent any fixes last week due to this. core: - edid build fix mst: - fix NULL ptr deref vgem: - fix close after free msm: - better dma-api usage sun4i: - disable allow_fb_modifiers amdgpu: - Additional OD fixes for navi - Misc display fixes - VCN 2.5 DPG fix - Prevent build errors on PowerPC on some configs - GDS EDC fix i915: - dsi/acpi fixes - gvt locking and allocation fixes - gem/gt fixes - bios timing parameters fix" * tag 'drm-fixes-2020-02-14' of git://anongit.freedesktop.org/drm/drm: (50 commits) drm/i915: Mark the removal of the i915_request from the sched.link drm/i915/execlists: Reclaim the hanging virtual request drm/i915/execlists: Take a reference while capturing the guilty request drm/i915/execlists: Offline error capture drm/i915/gt: Allow temporary suspension of inflight requests drm/i915: Keep track of request among the scheduling lists drm/i915/gem: Tighten checks and acquiring the mmap object drm/i915: Fix preallocated barrier list append drm/i915/gt: Acquire ce->active before ce->pin_count/ce->pin_mutex drm/i915: Tighten atomicity of i915_active_acquire vs i915_active_release drm/i915: Stub out i915_gpu_coredump_put drm/amdgpu:/navi10: use the ODCAP enum to index the caps array drm/amdgpu: update smu_v11_0_pptable.h drm/amdgpu: correct comment to clear up the confusion drm/amd/display: DCN2.x Do not program DPPCLK if same value drm/amd/display: Don't map ATOM_ENABLE to ATOM_INIT drm/amdgpu/vcn2.5: fix warning drm/amdgpu: limit GDS clearing workaround in cold boot sequence drm/amdgpu: fix amdgpu pmu to use hwc->config instead of hwc->conf amdgpu: Prevent build errors regarding soft/hard-float FP ABI tags ...
-
Randy Dunlap authored
Eliminate all kernel-doc and Sphinx warnings in <linux/netdevice.h>. Fixes these warnings: ../include/linux/netdevice.h:2100: warning: Function parameter or member 'gso_partial_features' not described in 'net_device' ../include/linux/netdevice.h:2100: warning: Function parameter or member 'l3mdev_ops' not described in 'net_device' ../include/linux/netdevice.h:2100: warning: Function parameter or member 'xfrmdev_ops' not described in 'net_device' ../include/linux/netdevice.h:2100: warning: Function parameter or member 'tlsdev_ops' not described in 'net_device' ../include/linux/netdevice.h:2100: warning: Function parameter or member 'name_assign_type' not described in 'net_device' ../include/linux/netdevice.h:2100: warning: Function parameter or member 'ieee802154_ptr' not described in 'net_device' ../include/linux/netdevice.h:2100: warning: Function parameter or member 'mpls_ptr' not described in 'net_device' ../include/linux/netdevice.h:2100: warning: Function parameter or member 'xdp_prog' not described in 'net_device' ../include/linux/netdevice.h:2100: warning: Function parameter or member 'gro_flush_timeout' not described in 'net_device' ../include/linux/netdevice.h:2100: warning: Function parameter or member 'xdp_bulkq' not described in 'net_device' ../include/linux/netdevice.h:2100: warning: Function parameter or member 'xps_cpus_map' not described in 'net_device' ../include/linux/netdevice.h:2100: warning: Function parameter or member 'xps_rxqs_map' not described in 'net_device' ../include/linux/netdevice.h:2100: warning: Function parameter or member 'qdisc_hash' not described in 'net_device' ../include/linux/netdevice.h:3552: WARNING: Inline emphasis start-string without end-string. ../include/linux/netdevice.h:3552: WARNING: Inline emphasis start-string without end-string. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Per Forlin says: ==================== net: dsa: Make sure there is headroom for tag Sorry for re-posting yet another time.... I manage to include multiple email-senders and forgot to include cover-letter. Let's hope everyhthing is in order this time. Fix two tag drivers to make sure there is headroom for the tag data. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Per Forlin authored
Passing tag size to skb_cow_head will make sure there is enough headroom for the tag data. This change does not introduce any overhead in case there is already available headroom for tag. Signed-off-by: Per Forlin <perfn@axis.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Per Forlin authored
Passing tag size to skb_cow_head will make sure there is enough headroom for the tag data. This change does not introduce any overhead in case there is already available headroom for tag. Signed-off-by: Per Forlin <perfn@axis.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
William Dauchy authored
With ipip, it is possible to create an extra interface explicitly attached to a given physical interface: # ip link show tunl0 4: tunl0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ipip 0.0.0.0 brd 0.0.0.0 # ip link add tunl1 type ipip dev eth0 # ip link show tunl1 6: tunl1@eth0: <NOARP> mtu 1480 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ipip 0.0.0.0 brd 0.0.0.0 But it is not possible with ip6tnl: # ip link show ip6tnl0 5: ip6tnl0@NONE: <NOARP> mtu 1452 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/tunnel6 :: brd :: # ip link add ip6tnl1 type ip6tnl dev eth0 RTNETLINK answers: File exists This patch aims to make it possible by adding link comparaison in both tunnel locate and lookup functions; we also modify mtu calculation when attached to an interface with a lower mtu. This permits to make use of x-netns communication by moving the newly created tunnel in a given netns. Signed-off-by: William Dauchy <w.dauchy@criteo.com> Reviewed-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Merge tag 'mac80211-for-net-2020-02-14' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Just a few fixes: * avoid running out of tracking space for frames that need to be reported to userspace by using more bits * fix beacon handling suppression by adding some relevant elements to the CRC calculation * fix quiet mode in action frames * fix crash in ethtool for virt_wifi and similar * add a missing policy entry * fix 160 & 80+80 bandwidth to take local capabilities into account ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Karsten Graul says: ==================== net/smc: fixes for -net Fix a syzbot finding and a problem with the CLC handshake content. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ursula Braun authored
Just SMCR requires a CLC Peer ID, but not SMCD. The field should be zero for SMCD. Fixes: c758dfdd ("net/smc: add SMC-D support in CLC messages") Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ursula Braun authored
SMC does not work together with FASTOPEN. If sendmsg() is called with flag MSG_FASTOPEN in SMC_INIT state, the SMC-socket switches to fallback mode. To handle the previous ioctl FIOASYNC call correctly in this case, it is necessary to transfer the socket wait queue fasync_list to the internal TCP socket. Reported-by: syzbot+4b1fe8105f8044a26162@syzkaller.appspotmail.com Fixes: ee9dfbef ("net/smc: handle sockopts forcing fallback") Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Huazhong Tan says: ==================== net: hns3: fixes for -net This series includes three bugfixes for the HNS3 ethernet driver. [patch 1] fixes a management table lost issue after IMP reset. [patch 2] fixes a VF bandwidth configuration not work problem. [patch 3] fixes a problem related to IPv6 address copying. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Guangbin Huang authored
The IPv6 address defined in struct in6_addr is specified as big endian, but there is no specified endian in struct hclge_fd_rule_tuples, so it will cause a problem if directly use memcpy() to copy ipv6 address between these two structures since this field in struct hclge_fd_rule_tuples is little endian. This patch fixes this problem by using be32_to_cpu() to convert endian of IPv6 address of struct in6_addr before copying. Fixes: d93ed94f ("net: hns3: add aRFS support for PF") Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yonglong Liu authored
When enabling 4 TC after setting the bandwidth of VF, the bandwidth of VF will resume to default value, because of the qset resources changed in this case. This patch fixes it by using a fixed VF's qset resources according to HNAE3_MAX_TC macro. Fixes: ee9e4424 ("net: hns3: add support for configuring bandwidth of VF on the host") Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yufeng Mo authored
In the current process, the management table is missing after the IMP reset. This patch adds the management table to the reset process. Fixes: f5aac71c ("net: hns3: add manager table initialization for hardware") Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Rafael J. Wysocki authored
* pm-cpufreq: cpufreq: Make cpufreq_global_kobject static
-
Shay Bar authored
Before this patch, STA's would set new width of 160/80+80 MHz based on AP capability only. This is wrong because STA may not support > 80MHz BW. Fix is to verify STA has 160/80+80 MHz capability before increasing its width to > 80MHz. The "support_80_80" and "support_160" setting is based on: "Table 9-272 — Setting of the Supported Channel Width Set subfield and Extended NSS BW Support subfield at a STA transmitting the VHT Capabilities Information field" From "Draft P802.11REVmd_D3.0.pdf" Signed-off-by: Aviad Brikman <aviad.brikman@celeno.com> Signed-off-by: Shay Bar <shay.bar@celeno.com> Link: https://lore.kernel.org/r/20200210130728.23674-1-shay.bar@celeno.comSigned-off-by: Johannes Berg <johannes.berg@intel.com>
-
Sergey Matyukevich authored
The nl80211_policy is missing for NL80211_ATTR_STATUS_CODE attribute. As a result, for strictly validated commands, it's assumed to not be supported. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Link: https://lore.kernel.org/r/20200213131608.10541-2-sergey.matyukevich.os@quantenna.comSigned-off-by: Johannes Berg <johannes.berg@intel.com>
-
Dave Airlie authored
Merge tag 'drm-intel-next-fixes-2020-02-13' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes drm/i915 fixes for v5.6-rc2 Most of these were aimed at a "next fixes" pull already during the merge window, but there were issues with the baseline I used, which resulted in a lot of issues in CI. I've regenerated this stuff piecemeal now, adding gradually to it, and it seems healthy now. Due to the issues this is much bigger than I'd like. But it was obviously necessary to take the time to ensure it's not garbage... Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/878sl6yfrn.fsf@intel.com
-
Dave Airlie authored
Merge tag 'amd-drm-fixes-5.6-2020-02-12' of git://people.freedesktop.org/~agd5f/linux into drm-fixes amd-drm-fixes-5.6-2020-02-12: amdgpu: - Additional OD fixes for navi - Misc display fixes - VCN 2.5 DPG fix - Prevent build errors on PowerPC on some configs - GDS EDC fix Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200212224746.3992-1-alexander.deucher@amd.com
-
Dave Airlie authored
Merge tag 'drm-misc-next-fixes-2020-02-07' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes drm-misc-next fixes for v5.6: - Fix build error in drm/edid. - Plug close-after-free race in vgem_gem_create. - Handle CONFIG_DMA_API_DEBUG_SG better in drm/msm. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/551b6183-a581-9d12-10a9-24cd929de425@linux.intel.com
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
Fixes for v5.6: - Revert allow_fb_modifiers in sun4i, as it causes a regression for DE2 and DE3. - Fix null pointer deref in drm_dp_mst_process_up_req(). Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/672810c3-4212-0a46-337b-2cb855573fd2@linux.intel.com
-
- 13 Feb, 2020 16 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds authored
Pull arm64 fixes from Will Deacon: "Summary below, but it's all reasonably straightforward. There are some more fixes on the horizon, but nothing disastrous yet. Summary: - Fix build when KASLR is enabled but CONFIG_ARCH_RANDOM is not set - Fix context-switching of SSBS state on systems that implement it - Fix spinlock compiler warning introduced during the merge window - Fix incorrect header inclusion (linux/clk-provider.h) - Use SYSCTL_{ZERO,ONE} instead of rolling our own static variables - Don't scream if optional SMMUv3 PMU irq is missing - Remove some unused function prototypes" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: time: Replace <linux/clk-provider.h> by <linux/of_clk.h> arm64: Fix CONFIG_ARCH_RANDOM=n build perf/smmuv3: Use platform_get_irq_optional() for wired interrupt arm64/spinlock: fix a -Wunused-function warning arm64: ssbs: Fix context-switch when SSBS is present on all CPUs arm64: use shared sysctl constants arm64: Drop do_el0_ia_bp_hardening() & do_sp_pc_abort() declarations
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpioLinus Torvalds authored
Pull GPIO fixes from Linus Walleij: - Revert two patches to gpio_do_set_config() and implement the proper solution that works, also drop an unecessary call in set_config() - Fix up the lockdep class for hierarchical IRQ domains. - Remove some bridge code for line directions. - Fix a register access bug in the Xilinx driver. * tag 'gpio-v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: sifive: fix static checker warning spmi: pmic-arb: Set lockdep class for hierarchical irq domains gpio: xilinx: Fix bug where the wrong GPIO register is written to gpiolib: remove unnecessary argument from set_config call gpio: bd71828: Remove unneeded defines for GPIO_LINE_DIRECTION_IN/OUT MAINTAINERS: Sort entries in database for GPIO gpiolib: fix gpio_do_set_config() Revert "gpiolib: remove set but not used variable 'config'" Revert "gpiolib: Remove duplicated function gpio_do_set_config()"
-
David S. Miller authored
Jason A. Donenfeld says: ==================== icmp: account for NAT when sending icmps from ndo layer The ICMP routines use the source address for two reasons: 1. Rate-limiting ICMP transmissions based on source address, so that one source address cannot provoke a flood of replies. If the source address is wrong, the rate limiting will be incorrectly applied. 2. Choosing the interface and hence new source address of the generated ICMP packet. If the original packet source address is wrong, ICMP replies will be sent from the wrong source address, resulting in either a misdelivery, infoleak, or just general network admin confusion. Most of the time, the icmp_send and icmpv6_send routines can just reach down into the skb's IP header to determine the saddr. However, if icmp_send or icmpv6_send is being called from a network device driver -- there are a few in the tree -- then it's possible that by the time icmp_send or icmpv6_send looks at the packet, the packet's source address has already been transformed by SNAT or MASQUERADE or some other transformation that CONNTRACK knows about. In this case, the packet's source address is most certainly the *wrong* source address to be used for the purpose of ICMP replies. Rather, the source address we want to use for ICMP replies is the original one, from before the transformation occurred. Fortunately, it's very easy to just ask CONNTRACK if it knows about this packet, and if so, how to fix it up. The saddr is the only field in the header we need to fix up, for the purposes of the subsequent processing in the icmp_send and icmpv6_send functions, so we do the lookup very early on, so that the rest of the ICMP machinery can progress as usual. Changes v3->v4: - Add back the skb_shared checking, since the previous assumption isn't actually true [Eric]. This implies dropping the additional patches v3 had for removing skb_share_check from various drivers. We can revisit that general set of ideas later, but that's probably better suited as a net-next patchset rather than this stable one which is geared at fixing bugs. So, this implements things in the safe conservative way. Changes v2->v3: - Add selftest to ensure this actually does what we want and never regresses. - Check the size of the skb header before operating on it. - Use skb_ensure_writable to ensure we can modify the cloned skb [Florian]. - Conditionalize this on IPS_SRC_NAT so we don't do anything unnecessarily [Florian]. - It turns out that since we're calling these from the xmit path, skb_share_check isn't required, so remove that [Florian]. This simplifes the code a bit too. **The supposition here is that skbs passed to ndo_start_xmit are _never_ shared. If this is not correct NOW IS THE TIME TO PIPE UP, for doom awaits us later.** - While investigating the shared skb business, several drivers appeared to be calling it incorrectly in the xmit path, so this series also removes those unnecessary calls, based on the supposition mentioned in the previous point. Changes v1->v2: - icmpv6 takes subtly different types than icmpv4, like u32 instead of be32, u8 instead of int. - Since we're technically writing to the skb, we need to make sure it's not a shared one [Dave, 2017]. - Restore the original skb data after icmp_send returns. All current users are freeing the packet right after, so it doesn't matter, but future users might not. - Remove superfluous route lookup in sunvnet [Dave]. - Use NF_NAT instead of NF_CONNTRACK for condition [Florian]. - Include this cover letter [Dave]. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jason A. Donenfeld authored
Because xfrmi is calling icmp from network device context, it should use the ndo helper so that the rate limiting applies correctly. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Cc: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jason A. Donenfeld authored
Because wireguard is calling icmp from network device context, it should use the ndo helper so that the rate limiting applies correctly. This commit adds a small test to the wireguard test suite to ensure that the new functions continue doing the right thing in the context of wireguard. It does this by setting up a condition that will definately evoke an icmp error message from the driver, but along a nat'd path. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jason A. Donenfeld authored
Because sunvnet is calling icmp from network device context, it should use the ndo helper so that the rate limiting applies correctly. While we're at it, doing the additional route lookup before calling icmp_ndo_send is superfluous, since this is the job of the icmp code in the first place. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Cc: Shannon Nelson <shannon.nelson@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jason A. Donenfeld authored
Because gtp is calling icmp from network device context, it should use the ndo helper so that the rate limiting applies correctly. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Cc: Harald Welte <laforge@gnumonks.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jason A. Donenfeld authored
This introduces a helper function to be called only by network drivers that wraps calls to icmp[v6]_send in a conntrack transformation, in case NAT has been used. We don't want to pollute the non-driver path, though, so we introduce this as a helper to be called by places that actually make use of this, as suggested by Florian. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Cc: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
Pull crypto fix from Herbert Xu: "This fixes a Kconfig anomaly when lib/crypto is enabled without Crypto API" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: Kconfig - allow tests to be disabled when manager is disabled
-
David S. Miller authored
Davide Caratti says: ==================== add missing validation of 'skip_hw/skip_sw' ensure that all classifiers currently supporting HW offload validate the 'flags' parameter provided by user: - patch 1/2 fixes cls_matchall - patch 2/2 fixes cls_flower ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Davide Caratti authored
unlike other classifiers that can be offloaded (i.e. users can set flags like 'skip_hw' and 'skip_sw'), 'cls_flower' doesn't validate the size of netlink attribute 'TCA_FLOWER_FLAGS' provided by user: add a proper entry to fl_policy. Fixes: 5b33f488 ("net/flower: Introduce hardware offload support") Signed-off-by: Davide Caratti <dcaratti@redhat.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Davide Caratti authored
unlike other classifiers that can be offloaded (i.e. users can set flags like 'skip_hw' and 'skip_sw'), 'cls_matchall' doesn't validate the size of netlink attribute 'TCA_MATCHALL_FLAGS' provided by user: add a proper entry to mall_policy. Fixes: b87f7936 ("net/sched: Add match-all classifier hw offloading.") Signed-off-by: Davide Caratti <dcaratti@redhat.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Hangbin Liu authored
@thoff has moved to struct flow_dissector_key_control. Fixes: 42aecaa9 ("net: Get skb hash over flow_keys structure") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Li RongQing authored
"do {} while" in page_pool_refill_alloc_cache will always refill page once whether refill is true or false, and whether alloc.count of pool is less than PP_ALLOC_CACHE_REFILL or not this is wrong, and will cause overflow of pool->alloc.cache the caller of __page_pool_get_cached should provide guarantee that pool->alloc.cache is safe to access, so in_serving_softirq should be removed as suggested by Jesper Dangaard Brouer in https://patchwork.ozlabs.org/patch/1233713/ so fix this issue by calling page_pool_refill_alloc_cache() only when pool->alloc.count is zero Fixes: 44768dec ("page_pool: handle page recycle for NUMA_NO_NODE condition") Signed-off-by: Li RongQing <lirongqing@baidu.com> Suggested-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queueDavid S. Miller authored
Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2020-02-12 This series contains fixes to only the ice driver. Dave fixes logic flaws in the DCB rebuild function which is used after a reset. Also fixed a configuration issue when switching between firmware and software LLDP mode where the number of TLV's configured was getting out of sync with what lldpad thinks is configured. Paul fixes how the driver displayed all the supported and advertised link modes by basing it on the PHY capabilities, and in the process cleaned up a lot of code. Brett fixes duplicate receive tail bumps by comparing the value we are writing to tail with the previously written tail value. Also cleaned up workarounds that are no longer needed with the latest NVM images. Anirudh cleaned up unnecessary CONFIG_PCI_IOV wrappers. Updated the driver to use ice_pf_to_dev() instead of &pf->pdev->dev or &vsi->back->pdev->dev. Cleaned up the string format in print function calls to remove newlines where applicable. Akeem updates the link message logging to include "Full Duplex" and "Negotiated", to help distinguish from "Requested" for FEC. Bruce fixes and consolidates the logging of firmware/NVM information during driver load, since the information is duplicate of what is available via ethtool. Fixed the checking of the Unit Load Status bits after reset to ensure they are 0x7FF before continuing, by updating the mask. Cleanup up possible NULL dereferences that were created by a previous commit. Ben fixes the driver to use the correct netif_msg_tx/rx_error() to determine whether to print the MDD event type. Tony provides several trivial fixes, which include whitespace, typos, function header comments, reverse Christmas tree issues. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Takashi Iwai authored
The commit 66f2d19f ("ALSA: pcm: Fix memory leak at closing a stream without hw_free") tried to fix the regression wrt the missing hw_free call at closing without SNDRV_PCM_IOCTL_HW_FREE ioctl. However, the code change dropped mistakenly the state check, resulting in calling hw_free twice when SNDRV_PCM_IOCTL_HW_FRE got called beforehand. For most drivers, this is almost harmless, but the drivers like SOF show another regression now. This patch adds the state condition check before calling do_hw_free() at releasing the stream for avoiding the double hw_free calls. Fixes: 66f2d19f ("ALSA: pcm: Fix memory leak at closing a stream without hw_free") Reported-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/s5hd0ajyprg.wl-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>
-