Various cleanups to sched.c that don't change the global control flow:

 - add kerneldoc comments to various functions
 - add spu_ prefixes to various functions
 - add/remove context from the runqueue in bind/unbind_context as
   it's part of the logical operation
 - add a call to put_active_spu to spu_unbind_contex as it's logically
   part of the unbind operation
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>

Only bind_context/unbind_context change the spu context state.  Thus
we can move all assignents of SPU_STATE_RUNNABLE into bind_context,
which parallels the unbind side aswell.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>

unbind_context already sets the context state to SPU_STATE_SAVED, thus
the spu_deactivate callers don't need to do it again.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>

Remove the empty last line in arch/powerpc/platforms/cell/spufs/run.c.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>

Remove the SPU_CONTEXT_PREEMPT define.  It's unused and won't be used
in this form after the scheduler rework.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>

It looks like we've had some serious bitrot there mostly due to tracking
of address_space's of mmap'ed files getting out of sync with the actual
mmap code. The mfc, mss and psmap were not tracked properly and thus
not invalidated on context switches (oops !)

I also removed the various file->f_mapping = inode->i_mapping;
assignments that were done in the other open() routines since that
is already done for us by __dentry_open.

One improvement we might want to do later is to assign the various
ctx-> fields at mmap time instead of file open/close time so that we
don't call unmap_mapping_range() on thing that have not been mmap'ed

Finally, I added some smp_wmb's after assigning the ctx-> fields to make
sure they are visible to other CPUs. I don't think this is really
necessary as I suspect locking in the fs layer will make that happen
anyway but better safe than sorry.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Struct page are no longer needed for SPUs, so let's not create them
on PS3 anymore.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

This patch removes the need for struct page for SPE local store
and registers from spufs. It also makes the locking much more
obvious and no longer relying on the truncate logic black magic
for protecting against races between unmap_mapping_range() and
new pages faulted in. It does so by switching to a nopfn() handler
and using the new vm_insert_pfn() to setup the PTEs itself while
holding a lock on the SPE.

The nice thing is that this patch actually removes a lot more code
than it adds :-)
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

The efika platform used three files efika-pci.c efika-setup.c and
a 2 line efika.h to link the two. The total of code in those is
really not much and therefore, I think they're better merged
in a single file.

There is absolutely _no_code_change_ at all, just merged the files.
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Now that the device tree has the good properties, we can
remove all the efika_init code by a single call to common code.

While we're modifying that file, a few whitespaces/alignement/typo
fixes are made (nothing significant).
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Paul Mackerras <paulus@samba.org>

The 52xx was put before CHRP to allow EFIKA to be recognized
properly. Now the efika tree is fixed up in prom_init so
no need for this ugly hack. So we restore the 'normal'
order.
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Paul Mackerras <paulus@samba.org>

We make the efika device tree compliant with the defined bindings
(at least compliant enough). This is mostly done by mangling
the device_type and compatible properties, but also adding
some missing bits.
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Much needed refinement of mpc5200 device tree binding specifications.

Short list:
- drop mpc52xx designator; only two supported chips exist, 5200 and 5200b.
  It's premature to refer to them as '52xx'.
- Specify optional 'model' and 'revision' properties in the soc5200 node
- Specify reqiured 'cell-index' property to identify between multiple SOC
  devices of the same type.  (Useful for arbitrating shared register access)
- Specify optional 'port-number' property for adjusting the logical serial
  port assignments.
- Specify optional 'has-wdt' property for gpt0 node.
- Add system-frequency property to soc5200 node
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Paul Mackerras <paulus@samba.org>

This rids us of a warning.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

This patch adds support for the AMCC Taishan PPC440GX evaluation
board.

This is still an arch/ppc port. I'm aware that the move of
4xx to arch/powerpc is making good progress right now. So this
patch is mainly intended to make the Taishan support available
for the community right now.
Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>

The recent vDSO consolidation patches broke powerpc due to a mistake
in the definition of MAXPAGES constants. This fixes it by moving to
a dynamically allocated array of pages instead as I don't like much
hard coded size limits. Also move the vdso initialisation to an initcall
since it doesn't really need to be done -that- early.

Applogies for not catching the breakage earlier, Roland _did_ CC me on
his patches a while ago, I got busy with other things and forgot to test
them.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

/proc/pmu/info contains AC Power: 0 when booting without battery.
Force AC Power, it will be updated whenever the battery state changes.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>

libata calls pci_request_regions to claim PCI BAR 0 - 5
pci_request_regions fails if one of the regions cant be claimed.
bar 5 has start == 0,  __request_resource will fail.

Tested on a p630 in SMP mode with pata_sl82c105

 00:03.1 IDE interface: Symphony Labs SL82c105 (rev 05) (prog-if 8f [Master SecP SecO PriP PriO])
         Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
         Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
         Interrupt: pin A routed to IRQ 86
         Region 0: I/O ports at 3fd3000f000 [size=8]
         Region 1: I/O ports at 3fd3000f010 [size=4]
         Region 2: I/O ports at 3fd3000f020 [size=8]
         Region 3: I/O ports at 3fd3000f030 [size=4]
         Region 4: I/O ports at 3fd3000f040 [size=16]
         Region 5: I/O ports at 3fd30000000 [size=16]
 00: ad 10 05 01 41 01 80 02 05 8f 01 01 08 48 80 00
 10: 01 f0 00 00 11 f0 00 00 21 f0 00 00 31 f0 00 00
 20: 41 f0 00 00 01 00 00 00 00 00 00 00 00 00 00 00
 30: 00 00 00 00 00 00 00 00 00 00 00 00 56 01 02 28
 40: b3 08 ff 00 09 09 00 00 09 09 00 00 09 09 00 00
 50: 09 09 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 70: 00 00 00 00 00 00 00 00 00 00 00 00 ff 00 00 00
 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

 name             "ide"
 linux,phandle    00d5cdc0 (14011840)
 assigned-addresses 81001910 00000000 0000f000 00000000 00000008 81001914
                  00000000 0000f010 00000000 00000004 81001918 00000000
                  0000f020 00000000 00000008 8100191c 00000000 0000f030
                  00000000 00000004 81001920 00000000 0000f040 00000000
                  00000010 81001924 00000000 00000000 00000000 00000010
 interrupts       00000003
 built-in
 #size-cells      00000000
 #address-cells   00000001
 device_type      "ide"
 reg              00001900 00000000 00000000 00000000 00000000
                  41001910 00000000 00000000 00000000 00000008
                  41001914 00000000 00000000 00000000 00000004
                  41001918 00000000 00000000 00000000 00000008
                  4100191c 00000000 00000000 00000000 00000004
                  41001920 00000000 00000000 00000000 00000010
                  41001924 00000000 00000000 00000000 00000010
 compatible       "pci10ad,105"
                  "pciclass,01018f"
 ibm,fw-slot-number 00000000
 fast-back-to-back
 devsel-speed     00000001
 max-latency      00000028 (40)
 min-grant        00000002
 class-code       0001018f (65935)
 revision-id      00000005
 device-id        00000105 (261)
 vendor-id        000010ad (4269)
 ibm,loc-code     "U0.1-P1/Q6"
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Move all the initialized variables to bss.
Mark a version string as const.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>

During ppc64+ppc merge virtual DMA code for floppy driver was not
ported.  This patch restores virtual DMA support for floppy in new
powerpc target.

It is necessary at least on Pegasos and AmigaOne machines for the
floppy drive to function.  ISA DMA controller works incorrectly there
due to its addressing limitations.

Virtual DMA mode is activated by floppy=nodma option passed to the
kernel (or module).  There's no automatic switch like on i386.
Signed-off-by: Pavel Fedin <sonic_amiga@rambler.ru>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Disabling IRQ is required only in invalidation.  This changes
"spin_lock_irqsave" to "spin_lock" in other ops.
Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp>
Signed-off-by: Akira Iguchi <akira2.iguchi@toshiba.co.jp>
Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

ARCH=powerpc should not use the ghastly un-multiplatformable tangle of
includes that starts with asm-ppc/ibm4xx.h.  This patch removes a
compile-breaking include of it from head_44x.S.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [SPARC]: Re-export saved_command_line to modules.
  [SPARC64]: Increase command line size to 2048 like other arches.
  [SPARC64]: We do not need ZONE_DMA.

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (25 commits)
  [XFRM]: Fix OOPSes in xfrm_audit_log().
  [TCP]: cleanup of htcp (resend)
  [TCP]: Use read mostly for CUBIC parameters.
  [NETFILTER]: nf_conntrack_tcp: make sysctl variables static
  [NETFILTER]: ip6t_mh: drop piggyback payload packet on MH packets
  [NETFILTER]: Fix whitespace errors
  [NETFILTER]: Kconfig: improve dependency handling
  [NETFILTER]: xt_mac/xt_CLASSIFY: use IPv6 hook names for IPv6 registration
  [NETFILTER]: nf_conntrack: change nf_conntrack_l[34]proto_unregister to void
  [NETFILTER]: nf_conntrack: properly use RCU for nf_conntrack_destroyed callback
  [NETFILTER]: ip_conntrack: properly use RCU for ip_conntrack_destroyed callback
  [NETFILTER]: nf_conntrack: fix invalid conntrack statistics RCU assumption
  [NETFILTER]: ip_conntrack: fix invalid conntrack statistics RCU assumption
  [NETFILTER]: nf_conntrack: properly use RCU API for nf_ct_protos/nf_ct_l3protos arrays
  [NETFILTER]: ip_conntrack: properly use RCU API for ip_ct_protos array
  [NETFILTER]: nf_nat: properly use RCU API for nf_nat_protos array
  [NETFILTER]: ip_nat: properly use RCU API for ip_nat_protos array
  [NETFILTER]: nf_log: minor cleanups
  [NETFILTER]: nf_log: switch logger registration/unregistration to mutex
  [NETFILTER]: nf_log: make nf_log_unregister_pf return void
  ...

This reverts some bogosity from the dynamic command-line
changes made on sparc32 and sparc64.

Drivers such as drivers/sbus/char/openprom.c reference
saved_command_line, and can be modular.

The boot_command_line is __initdata, yet the dynamic command-line
changes add modular exports of that symbol, obviously wrong.
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David S. Miller <davem@davemloft.net>

Since we look in both source and object directories for localversion*
files, we accidentally ended up getting them twice.  Use 'sort -u' to
avoid that.
Reported-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Make sure that this function is called correctly, and
add BUG() checking to ensure the arguments are sane.

Based upon a patch by Joy Latten.
Signed-off-by: David S. Miller <davem@davemloft.net>

Minor non-invasive cleanups:
 * white space around operators and line wrapping
 * use const
 * use __read_mostly
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

These module parameters should be in the read mostly area to avoid
cache pollution.
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

sysctls are registered by the protocol module itself since 2.6.19, no need
to have them visible to others.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Regarding RFC3775, MH payload proto field should be IPPROTO_NONE. Otherwise
it must be discarded (and the receiver should send ICMP error).

We assume filter should drop such piggyback everytime to disallow slipping
through firewall rules, even the final receiver will discard it.
Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Instead of depending on internally needed options and letting users
figure out what is needed, select them when needed:

- IP_NF_IPTABLES, IP_NF_ARPTABLES and IP6_NF_IPTABLES select
  NETFILTER_XTABLES

- NETFILTER_XT_TARGET_CONNMARK, NETFILTER_XT_MATCH_CONNMARK and
  IP_NF_TARGET_CLUSTERIP select NF_CONNTRACK_MARK

- NETFILTER_XT_MATCH_CONNBYTES selects NF_CT_ACCT
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use NF_IP6_ instead of NF_IP_. The values are identical, this is merely
cleanup.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>