- 28 Apr, 2008 40 commits
-
-
Ondrej Zajicek authored
Correct the dev arg of framebuffer_alloc() in arkfb, s3fb and vt8623fb. Signed-off-by:
Ondrej Zajicek <santiago@crfreenet.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Ondrej Zajicek authored
After resume from STR, image is shifted by 8 pixels to the left. This patch fixes it. Signed-off-by:
-
Jean Delvare authored
There is no reason to drive the savagefb I2C bus at such a low speed, so bump it from 12.5 kbps to 50 kbps. The Intel (i810) and Matrox framebuffer drivers already run their I2C bus at this speed, and so are the legacy i2c-savage4 and i2c-prosavage drivers. Signed-off-by:
Jean Delvare <khali@linux-fr.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
Roel Kluin authored
in #if 0 inactivated function msttfb_load_cursor_image() the call eieio() occurs after rather than in the loop due to missing curly brackets. Signed-off-by:
Roel Kluin <12o3l@tiscali.nl> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Michal Januszewski authored
Don't treat valid modes returned by fb_find_mode() (best-fit modes, default modes or the first valid mode) as errors. Currently, when fb_find_mode() finds a valid mode belonging to one of the above-mentioned classes, uvesafb will ignore it and will try to set a 640x480 video mode. The expected behaviour (introduced by this patch) would be to use the valid mode returned by fb_find_mode() instead. Signed-off-by:
Michal Januszewski <spock@gentoo.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
Jean Delvare authored
There is no reason to drive the radeon I2C buses at such a low speed, so bump it from 12.5 kbps to 50 kbps. The Intel (i810) and Matrox framebuffer drivers already run their I2C bus at this speed. Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
Jean Delvare authored
RTRACE() does exactly the same thing as the standard pr_debug() call, so just use the latter. Signed-off-by:
-
Jean Delvare authored
Fix CONFIG_FB_RADEON_DEBUG. DEBUG must be defined before including any kernel header, otherwise dev_dbg() resolves to a no-op. Also, when debugging is disabled, don't set DEBUG at all instead of setting it to 0, to comply with what the kernel headers expect. Signed-off-by:
-
Andreas Herrmann authored
Additionally provide PCI device id in character format if possible. (The printable characters were commonly used to identify the cards.) Signed-off-by:
Andreas Herrmann <aherrman@arcor.de> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Roel Kluin authored
Fix incorrect length for strncat by replacing it with strlcat Signed-off-by:
-
Krzysztof Helt authored
Add removed option "mode" to keep compatibility with existing setups. The option is back for pm2fb, tridentfb and vt8623fb drivers. Signed-off-by:
Krzysztof Helt <krzysztof.h1@wp.pl> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
Krzysztof Helt authored
Add the option "mode_option". It also moves mtrr variable to devinitdata section. Signed-off-by:
-
Krzysztof Helt authored
Add the option "mode_option". This is one step toward changing all fb drivers to have common "mode_option" parameter. Signed-off-by:
-
Krzysztof Helt authored
Change the option "mode" into "mode_option". This is one step toward changing all fb drivers to have common "mode_option" parameter. Signed-off-by:
-
Krzysztof Helt authored
Add names of drivers converted to "mode_option" parameter. This is one step toward changing all fb drivers to have common "mode_option" parameter. Signed-off-by:
-
Krzysztof Helt authored
Add the option "mode_option". This is one step toward changing all fb drivers to have common "mode_option" parameter. Signed-off-by:
-
Krzysztof Helt authored
Change the option "mode_option" into "mode". It also adds __init attribute to tridentfb_setup function. This is one step toward changing all fb drivers to have common "mode_option" parameter. Signed-off-by:
-
Krzysztof Helt authored
Change the option "mode_option" into "mode". This is one step toward changing all fb drivers to have common "mode_option" parameter. Signed-off-by:
-
Roel Kluin authored
Free buffer when the framebuffer can't be registered Signed-off-by:
-
Peter Samuelson authored
Fix limit check in FBIOPUT_CON2FBMAP ioctl. Signed-off-by:
Peter Samuelson <peter@p12n.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
Andres Salomon authored
Prior to suspend, we allocate and switch to a new VT; after suspend, we switch back to the original VT. This can be slow, and is completely unnecessary if the framebuffer we're using can restore video properly. This adds a hook that allows drivers to select whether or not to do this vt switch, and changes the gxfb driver to call this hook. It also adds a module param to gxfb to allow controlling of the vt switch (defaulting to no switch). (Note: I'm not convinced that console_sem is the best way to protect this, but we should probably have some form of locking..) [akpm@linux-foundation.org: build fix] Signed-off-by:
Andres Salomon <dilinger@debian.org> Cc: Jordan Crouse <jordan.crouse@amd.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by:
-
Andres Salomon authored
This adds the ability to suspend/resume the gxfb driver, which includes: - The addition of a Graphics Processor register table in gxfb.h, and associated GP handling. - Register and palette saving code; registers are stored in gxfb_par. A few MSR values are saved as well. - gx_powerup and gx_powerdown functions which restore/save registers and enable/disable graphic engines. - gxfb_suspend/gxfb_resume Originally based on a patch by Jordan Crouse. Signed-off-by: -
Andres Salomon authored
We want to stop sharing stuff with gx1fb; it makes little sense. There were fields in geodefb_par that weren't being used, there was little point to the DC/VP ops callbacks, etc. This implements the following: - Create gxfb_par (based on geodefb_par), place it in gxfb.h - Drop display_gx.h and video_gx.h. The last few patches moved most stuff into gxfb.h anyways, so there was very little left. - Drop the geode_{dc,vid}_ops stuff. Un-static functions, add declarations to gxfb.h. Signed-off-by: -
Andres Salomon authored
This continues the gxfb header cleanups. MSRs are defined in geode.h; the specific bits we care about are defined in gxfb.h. Signed-off-by:
-
Andres Salomon authored
This does the following in preparation for register saving: - moves the register definitions from video_gx.h and display_gx.h into gxfb.h. - renames GX_* registers to match their section (ie, VP_). - renames register bitfields to match the data sheet (ie, DC_DCFG_TGEN -> DC_DISPLAY_CFG_TGEN). - for DC registers, rather than defining to specific addresses, use an enum to number them sequentially and just multiply by 4(bytes) to access them (in read_dc/write_dc). - for VP and FP registers, use an enum and multiple by 8 (bytes). They're 64bit registers. Signed-off-by: -
Andres Salomon authored
This creates read_dc/write_dc, read_vp/write_vp, and read_fp/write_fp for reading and updating those registers. It creates gxfb.h to house these. We also drop a no-op readl() from gx_set_mode. Other than that, there should be no functionality change. Signed-off-by:
-
Andres Salomon authored
Use a command line option (vram) rather than hardcoding the vram size. LxFB already does this; it's useful for machines that can't query the BIOS for fb size. This patch originated from David Woodhouse, was modified by Jordan Crouse, and was then modified further by me. This also adds some gxfb documentation in Documentation/fb. Signed-off-by:
-
Andres Salomon authored
Drop the class/class_mask stuff; it's unnecessary as long as the vendor and device IDs match. Signed-off-by:
-
Jordan Crouse authored
When the FP strap is enabled, don't turn on the CRT DACs - that will save about 35 mA of power. Updated/cleaned up by Andres Salomon. Signed-off-by:
Jordan Crouse <jordan.crouse@amd.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
Jordan Crouse authored
While running in flatpanel mode it is important to change the FP sync bits (VG register 0x408) rather then the CRT sync bits (VG register 0x008). This patch keeps the CRT sync bits at default when a flatpanel exists. Note that this also fixes inverted logic; we want CRT_VSYNC_POL to be set (ie, vsync is normally high) when FB_SYNC_VERT_HIGH_ACT is unset. Signed-off-by:
-
Andres Salomon authored
This is generic VSA2 detection. It's used by OLPC to determine whether or not the BIOS contains VSA2, but since other BIOSes are coming out that don't use the VSA (ie, tinybios), it might end up being useful for others. Signed-off-by:
Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Jordan Crouse <jordan.crouse@amd.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Andres Salomon authored
This cleans up a few MSR-using drivers in the following manner: - Ensures MSRs are all defined in asm/geode.h, rather than in misc places - Makes the naming consistent; cs553[56] ones begin with MSR_, GX-specific ones start with MSR_GX_, and LX-specific ones start with MSR_LX_. Also, make the names match the data sheet. - Use MSR names rather than numbers in source code - Document the fact that the LX's MSR_PADSEL has the wrong value in the data sheet. That's, uh, good to note. Signed-off-by: -
Harvey Harrison authored
Use __u32 for max_len to match the declaration of length in the struct fb_bitfield. Suppresses sparse shadowed variable warnings from the nested max() macros: drivers/video/console/fbcon.h:130:8: warning: symbol '_x' shadows an earlier one drivers/video/console/fbcon.h:130:8: originally declared here drivers/video/console/fbcon.h:130:8: warning: symbol '_x' shadows an earlier one drivers/video/console/fbcon.h:130:8: originally declared here drivers/video/console/fbcon.h:130:8: warning: symbol '_y' shadows an earlier one drivers/video/console/fbcon.h:130:8: originally declared here [akpm@linux-foundation.org: fix constness] Signed-off-by:
Harvey Harrison <harvey.harrison@gmail.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
Krzysztof Helt authored
Fix error values returned in some code branches in the pm2fb_probe() function. Signed-off-by:
-
Julia Lawall authored
The kernel.h macro DIV_ROUND_UP performs the computation (((n) + (d) - 1) / (d)) but is perhaps more readable. An extract of the semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @haskernel@ @@ #include <linux/kernel.h> @depends on haskernel@ expression n,d; @@ ( - (n + d - 1) / d + DIV_ROUND_UP(n,d) | - (n + (d - 1)) / d + DIV_ROUND_UP(n,d) ) @depends on haskernel@ expression n,d; @@ - DIV_ROUND_UP((n),d) + DIV_ROUND_UP(n,d) @depends on haskernel@ expression n,d; @@ - DIV_ROUND_UP(n,(d)) + DIV_ROUND_UP(n,d) // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
Anton Vorontsov authored
Signed-off-by:
Anton Vorontsov <avorontsov@ru.mvista.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by:
-
Anton Vorontsov authored
Add support for the framebuffers with non-native endianness. This is done via FBINFO_FOREIGN_ENDIAN flag that will be used by the drivers. Depending on the host endianness this flag will be overwritten by FBINFO_BE_MATH internal flag, or cleared. Tested to work on MPC8360E-RDK (BE) + Fujitsu MINT framebuffer (LE). Signed-off-by:
-
Michal Januszewski authored
Currently, if a perfect match in terms of resolution is not found, fb_find_mode() only looks for a best-fit mode among modes with a higher resolution than the one requested. Thus, if the user requests a resolution higher than the largest supported one, they are dropped to the default mode (usually a low resolution one). Change this behaviour so that all valid video modes are considered when looking for a best-fit mode, while still preferring modes with a higher resolution. Signed-off-by:
-
Anton Vorontsov authored
Add a new function gpiochip_reserve() to reserve ranges of gpios that platform code has pre-allocated. That is, this marks gpio numbers which will be claimed by drivers that haven't yet been loaded, and thus are not available for dynamic gpio number allocation. [akpm@linux-foundation.org: remove unneeded __must_check] [david-b@pacbell.net: don't export gpiochip_reserve (section fix)] Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
-
Anton Vorontsov authored
If gpio_chip->base is negative during registration, gpiolib performs dynamic base allocation. This is useful for devices that aren't always present, such as GPIOs on hotplugged devices rather than mainboards. (This behavior was previously specified but not implemented.) To avoid using any numbers that may have been explicitly assigned but not yet registered, this dynamic allocation assigns GPIO numbers from the biggest number on down, instead of from the smallest on up. Signed-off-by:
-
