BTRFS_ATTR_RW could set the mode and be inline with BTRFS_ATTR
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>

All that uses BTRFS_ATTR want mode to be set at 0444 so just do
it at the define.  And few spacing alignments.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>

we have BTRFS_ATTR define to create sysfs RO file, use that.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>

If we need to cow a node, increase the write lock level and retry the
tree search, there's no point of changing the node locks in our path
to blocking mode, as we only waste time and unnecessarily wake up other
tasks waiting on the spinning locks (just to block them again shortly
after) because we release our path before repeating the tree search.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>

In ctree.c:setup_items_for_insert(), we can unlock all nodes in our
path before we process the leaf (shift items and data, adjust data
offsets, etc). This allows for better btree concurrency, as we're
often holding a write lock on at least the node at level 1.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>

btrfs_lookup_csums_range() uses ALIGN() to check if "start"
and "end + 1" are aligned to "root->sectorsize". It's better to
replace these with IS_ALIGNED() for simplicity.
Signed-off-by: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>

Tracepoint trace_btrfs_normal_work_done never has an user, just cleanup it.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>

Kernel workqueue's tracepoints print the address of work_struct, while btrfs
workqueue's tracepoints print the address of btrfs_work.

We need a connection between this two, for example when debuging, we usually
grep an address in the trace output.  So it'd be better to also print
work_struct in btrfs workqueue's tracepoint.

Please note that we can only add this into those tracepoints whose work is still
available in memory because we need to reference the work.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>

We want this to debug qgroup changes on live systems.
Signed-off-by: Mark Fasheh <mfasheh@suse.de>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>

The member variants - latest_devid and latest_trans - of fs_devices structure
are set, but no one use them to do anything. so remove them.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>

Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>

The io error might happen during writing out the device stats, and the
device stats information and dirty flag would be update at that time,
but the current code didn't consider this case, just clear the dirty
flag, it would cause that we forgot to write out the new device stats
information. Fix it.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>

The lock in btrfs_device structure was far away from its protected data, it would
make CPU load the cache line twice when we accessed them, move them together.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>

The super block generation of the seed devices is not the same as the
filesystem which sprouted from them because we don't update the super
block on the seed devices when we change that new filesystem. So we
should not use the generation of that new filesystem to check the super
block generation on the seed devices, Fix it.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>

All the metadata in the seed devices has the same fsid as the fsid
of the seed filesystem which is on the seed device, so we should check
them by the current filesystem. Fix it.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>

The transaction thread may want to do more work, namely it pokes the
cleaner ktread that will start processing uncleaned subvols.

This can be triggered by user via the 'btrfs fi sync' command, otherwise
there was a delay up to 30 seconds before the cleaner started to clean
old snapshots.
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>

inline data is stored from offset of @disk_bytenr in
struct btrfs_file_extent_item. So substracting total
size of struct btrfs_file_extent_item is wrong, fix it.
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>

Btrfs could still inline file data if its size is same as
page size, so don't skip max value here.
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>

If flag NOCOMPRESS is set which means bad compression ratio,
we could avoid call cow_file_range_async() for this case earlier.
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>

If a file's compression ratios is bad, we will set NOCOMPRESS
flag for it, and it will skip compression for that inode next time.

However, if we remount fs to COMPRESS_FORCE, it still should try
if we could compress pages for that inode, this patch fix wrong
check for this problem.
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>

Fix the following sparse warning:
fs/btrfs/send.c:518:51: warning: incorrect type in argument 2 (different address spaces)
fs/btrfs/send.c:518:51:    expected char const [noderef] <asn:1>*<noident>
fs/btrfs/send.c:518:51:    got char *

We can safely use (const char __user *) with set_fs(KERNEL_DS)

__force added to avoid sparse-all warning:
fs/btrfs/send.c:518:40: warning: cast adds address space to expression (<asn:1>)
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Reviewed-by: Zach Brown <zab@zabbo.net>
Signed-off-by: Chris Mason <clm@fb.com>

Use BUG_ON(x) rather than if(x) BUG();

The semantic patch that fixes this problem is as follows:

// <smpl>
@@ identifier x; @@
-if (x) BUG();
+BUG_ON(x);
// </smpl>
Signed-off-by: Himangi Saraogi <himangi774@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Chris Mason <clm@fb.com>

`struct workspace' used for zlib compression contains two zlib
z_stream-s: `def_strm' used in zlib_compress_pages(), and `inf_strm'
used in zlib_decompress/zlib_decompress_biovec(). None of these
functions use `inf_strm' and `def_strm' simultaniously, meaning that
for every compress/decompress operation we need only one z_stream
(out of two available).

`inf_strm' and `def_strm' are different in size of ->workspace. For
inflate stream we vmalloc() zlib_inflate_workspacesize() bytes, for
deflate stream - zlib_deflate_workspacesize() bytes. On my system zlib
returns the following workspace sizes, correspondingly: 42312 and 268104
(+ guard pages).

Keep only one `z_stream' in `struct workspace' and use it for both
compression and decompression. Hence, instead of vmalloc() of two
z_stream->worskpace-s, allocate only one of size:
	max(zlib_deflate_workspacesize(), zlib_inflate_workspacesize())
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Chris Mason <clm@fb.com>

We were returning with 0 (success) because we weren't extracting the
error code from em (PTR_ERR(em)). Fix it.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>

The tree field of struct extent_state was only used to figure out if
an extent state was connected to an inode's io tree or not. For this
we can just use the rb_node field itself.

On a x86_64 system with this change the sizeof(struct extent_state) is
reduced from 96 bytes down to 88 bytes, meaning that with a page size
of 4096 bytes we can now store 46 extent states per page instead of 42.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>

replace IS_ERR/PTR_ERR

Cc: Chris Mason <clm@fb.com>
Cc: Josef Bacik <jbacik@fb.com>
Cc: linux-btrfs@vger.kernel.org
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Chris Mason <clm@fb.com>

Marc argued that if there are several btrfs filesystems mounted,
while users even don't know which filesystem hit the corrupted
errors something like generation verification failure.

Since @extent_buffer structure has a member @fs_info, let's output
btrfs device info.
Reported-by: Marc MERLIN <marc@merlins.org>
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>

If we mounted a seed filesystem with degraded option, and then added a new
device into the seed filesystem, then we found adding device failed because
of the IO failure.

Steps to reproduce:
 # mkfs.btrfs -d raid1 -m raid1 <dev0> <dev1>
 # btrfstune -S 1 <dev0>
 # mount <dev0> -o degraded <mnt>
 # btrfs device add -f <dev2> <mnt>

It is because the original didn't set the chunk on the seed device to be
read-only if the degraded flag was set. It was introduced by patch f48b9075,
which fixed the problem the raid1 filesystem became read-only after one device
of it was missing. But this fix method was not right, we should set the read-only
flag according to the number of the missing devices, not the degraded mount
option, if the number of the missing devices is less than the max error number
that the profile of the chunk tolerates, we don't set it to be read-only.

Cc: Josef Bacik <jbacik@fb.com>
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>

Btrfs defragment will utilize COW feature, which means this
did not work for nodatacow option, this problem was detected
by xfstests generic/018 with nodatacow mount option.

Fix this problem by forcing cow for a extent with state
@EXTETN_DEFRAG setting.
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>

Rediffed remaining parts of original patch from Anand Jain.  This makes
sure to avoid trailing newlines in the btrfs label output

reproducer.sh:

===============================================================================

TEST_DEV=/dev/vdb
TEST_DIR=/home/sat/mnt

umount /home/sat/mnt

mkfs.btrfs -f $TEST_DEV
UUID=$(btrfs fi show $TEST_DEV | head -1 | sed -e 's/.*uuid: \([-0-9a-z]*\)$/\1/')
mount $TEST_DEV $TEST_DIR
LABELFILE=/sys/fs/btrfs/$UUID/label

echo "Test for empty label..." >&2
LINES="$(cat $LABELFILE | wc -l | awk '{print $1}')"
RET=0

if [ $LINES -eq 0 ] ; then
    echo '[PASS] Trailing \n is removed correctly.' >&2
else
    echo '[FAIL] Trailing \n still exists.' >&2
    RET=1
fi

echo "Test for non-empty label..." >&2

echo testlabel >$LABELFILE
LINES="$(cat $LABELFILE | wc -l | awk '{print $1}')"

if [ $LINES -eq 1 ] ; then
    echo '[PASS] Trailing \n is removed correctly.' >&2
else
    echo '[FAIL] Trailing \n still exists.' >&2
    RET=1
fi

exit $RET
===============================================================================
Signed-off-by: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>

as in the disk add patch, disk detached from the volume must be
recorded in the syslog as well for the same reason.
Signed-off-by: Anand Jain <Anand.Jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>

when we add a new disk to the mounted btrfs we don't record it
as of now, disk add is a critical change of btrfs configuration,
it must be recorded in the syslog to help offline investigations
of customer problems when reported.
Signed-off-by: Anand Jain <Anand.Jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>

Steps to reproduce:
 # mkfs.btrfs -f /dev/sdb
 # mount /dev/sdb /mnt -o compress-force=lzo
 # mount /dev/sdb /mnt -o remount,compress=zlib
 # cat /proc/mounts

Remounting from compress-force to compress could not clear compress-force
option. The problem is there is no way for users to clear compress-force
option separately.

Fix this problem by clearing @FORCE_COMPRESS flag when remounting to
compress=xxx.
Suggested-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Reviewed-by: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com>
Tested-by: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>

The form

  (value + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT

is equivalent to

  (value + PAGE_CACHE_SIZE - 1) / PAGE_CACHE_SIZE

The rest is a simple subsitution, no difference in the generated
assembly code.
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>

Only wraps the ALIGN macro.
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>

The nodesize and leafsize were never of different values. Unify the
usage and make nodesize the one. Cleanup the redundant checks and
helpers.

Shaves a few bytes from .text:

  text    data     bss     dec     hex filename
852418   24560   23112  900090   dbbfa btrfs.ko.before
851074   24584   23112  898770   db6d2 btrfs.ko.after
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>

btrfs_set_key_type and btrfs_key_type are used inconsistently along with
open coded variants. Other members of btrfs_key are accessed directly
without any helpers anyway.
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>

There's no user of the return value and we can get rid of the comment in
put_super.
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>

The naming is confusing, generic yet used for a specific cache. Add a
prefix 'ino_' or rename appropriately.
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>

Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>