Merge tag 'stm32-dt-for-v5.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dt

STM32 DT updates for v5.2, round 1

Highlights:
----------

MPU part:
 - Add initial support of stm32mp157a-dk1 board:
   This board embeds a STM32MP157a SOC with AC package (TFBGA361, 148 ios)
   and 512MB of DDR3. Several connections are available on this boards:
   4*USB2.0, 1*USB2.0 typeC, SDcard, RJ45, HDMI, Arduino connector, ...

 - Add initial support of stm32mp157c-dk2 board:
   This board is a "super-set" of stm32mp157a-dk1. It embeds a STM32MP157c SOC
   with AC package (TFBGA361, 148 ios) and 512MB of DDR3. Same connections
   than stm32mp157a-dk1 board are available. Display panel (otm8009a) and
   Murata wifi/BT combo is added.

 - Add and enable SD card support (MMCI variant) on stm32mp157c-ed1/ev1 and
   on stm32mp157a-dk1/dk2 boards.

 - Add and enable PMIC support (STPMIC1 chip) on stm32mp157c-ed1/ev1 and
   on stm32mp157a-dk1/dk2 boards.

 - Add and enable IPCC mailbox support on stm32mp157c-ed1/ev1 and
   on stm32mp157a-dk1/dk2 boards.

 - Add sysconfig clock support on stm32mp157c.
 - Add romem and temperature calibration support on stm32mp157c.
 - Add SPDIFRX support on stm32mp157c.
 - Enable CEC on stm32mp157a-dk1/dk2.

MCU part:
 - Add and enable SD card support (MMCI variant) on stm32h743 eval and disco
   boards.
 - Add romem and temperature calibration support on stm32f429
   (and so stm32f469).
 - Enable stm32f769 clock driver

* tag 'stm32-dt-for-v5.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (24 commits)
  ARM: dts: stm32: enable cec on stm32mp157a-dk1 board
  ARM: dts: stm32: add cec pins muxing on stm32mp157
  ARM: dts: stm32: add ltdc pins muxing on stm32mp157
  ARM: dts: stm32: add I2C sleep pins muxing on stm32mp157
  ARM: dts: stm32: add power supply of otm8009a on stm32mp157c-dk2
  ARM: dts: stm32: Enable STM32F769 clock driver
  ARM: dts: stm32: add stpmic1 support on stm32mp157a dk1 board
  ARM: dts: stm32: add stpmic1 support on stm32mp157c ed1 board
  ARM: dts: stm32: add spdfirx pins to stm32mp157c
  ARM: dts: stm32: add spdifrx support on stm32mp157c
  ARM: dts: stm32: Add romem and temperature calibration on stm32f429
  ARM: dts: stm32: Add romem and temperature calibration on stm32mp157c
  ARM: dts: stm32: Add clock on stm32mp157c syscfg
  ARM: dts: stm32: enable IPCC mailbox support on STM32MP157a-dk1
  ARM: dts: stm32: enable IPCC mailbox support on STM32MP157c-ed1
  ARM: dts: stm32: add IPCC mailbox support on STM32MP157c
  ARM: dts: stm32: add sdmmc1 support on stm32mp157a dk1 board
  ARM: dts: stm32: add sdmmc1 support on stm32mp157c ed1 board
  ARM: dts: stm32: add sdmmc1 support on stm32mp157c
  ARM: dts: stm32: add sdmmc1 support on stm32h743i disco board
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'aspeed-5.2-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into arm/dt

ASPEED device tree updates for 5.2

 - RTC and GFX DRM driver went upstream this cycle

 - Miscellaneous board updates for Facebook and IBM BMCs

* tag 'aspeed-5.2-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed:
  ARM: dts: aspeed: Add RTC node
  ARM: dts: aspeed: witherspoon: Update BMC partitioning
  ARM: dts: aspeed: cmm: enable iio-hwmon-adc
  ARM: dts: aspeed: tiogapass: Enable VUART
  ARM: dts: aspeed-g5: Add video engine
  ARM: dts: aspeed: Enable the GFX IP
  ARM: dts: aspeed-g5: Add resets and clocks to GFX node
  ARM: dts: aspeed: witherspoon: Enable vhub
  ARM: dts: aspeed: palmetto: Fix flash_memory region
  ARM: dts: aspeed: ast2500: Update flash layout
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'renesas-arm64-dt-for-v5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into arm/dt

Renesas ARM64 Based SoC DT Updates for v5.2

* R-Car Gen3 SoC based Salvator-X and Salvator-XS boards
  - Add GPIO keys support
  - Sort rwdt node alphabetically

* R-Car H3 (r8a7795), M3-W (r8a7796) and M3-N (r8a77965) SoCs
  - Use extended audio DMAC register

* R-Car M3-W (r8a7796) SoC
  - Remove unneeded sound #address/size-cells

* R-Car M3-N (r8a77965) SoC
  - Add SSIU support for audio

* R-Car E3 (r8a77990) and RZ/G2E (r8a774c0) SoCs
  - Remove invalid compatible value for CSI40

* R-Car E3 (r8a77990) SoC
  - Cprrect SPDX license identifier style

* R-Car E3 (r8a77990) based Ebisu board
  - Add BD9571 PMIC with DDR0 backup power config
  - Correct adv7482 hexadecimal register address
  - Add GPIO expander

* R-Car E3 (r8a77990) based Ebisu and D3 (r8a77995) based Draak boards
  - Update bootargs to bring them into line with other R-Car Gen3 boards
  - Enable LVDS1 encoder

* R-Car D3 (r8a77995) based Draak board
  - Correct EthernetAVB phy mode
  - Enable CAN0 and CAN1

* RZ/G2E (r8a774c0) SoC
  - Add CANFD support
  - Correct CPU node style

* RZ/G2E (r8a774c0) and RZ/G2M (r8a774a1) SoCs
  - Add clkp2 clock to CAN nodes

* RZ/G2E (r8a774c0) based EK874 board
  - Add LED, CAN and RTC support

* tag 'renesas-arm64-dt-for-v5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (26 commits)
  arm64: dts: renesas: salvator-common: Add GPIO keys support
  arm64: dts: renesas: use extended audio dmac register
  arm64: dts: renesas: r8a77995: draak: Fix EthernetAVB phy mode to rgmii
  arm64: dts: renesas: salvator-common: Sort node label
  arm64: dts: renesas: Update Ebisu and Draak bootargs
  arm64: dts: renesas: r8a774c0: Add clkp2 clock to CAN nodes
  arm64: dts: renesas: r8a774c0: Add CANFD support
  arm64: dts: renesas: r8a774a1: Add clkp2 clock to CAN nodes
  arm64: dts: renesas: ebisu: Add PMIC DDR0 Backup Power config
  arm64: dts: renesas: r8a77990-ebisu: Add BD9571 PMIC
  arm64: dts: renesas: r8a77990: Remove invalid compatible value for CSI40
  arm64: dts: renesas: r8a774c0: Remove invalid compatible value for CSI40
  arm64: dts: renesas: r8a77995: draak: Enable CAN0, CAN1
  arm64: dts: renesas: r8a774c0-cat874: Add RWDT support
  arm64: dts: renesas: ebisu: Enable VIN5
  arm64: dts: renesas: r8a774c0-cat874: Add LEDs support
  arm64: dts: renesas: r8a774c0-cat874: add RTC support
  arm64: dts: renesas: cat875: Add CAN support
  arm64: dts: renesas: r8a774c0: Fix cpu nodes style
  arm64: dts: renesas: r8a77965: add SSIU support for sound
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'v5.2-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt

Core new soc features are hdmi-cec for rk3328, scheduler capacity-values
and emmc cleanups for rk3399. New boards are the OrangePi (rk3399) and
NanoPi NEO4. Both the OrangePi as well as the NanoPC/Pie family also
directly got some additional features added after the boards itself.

The Rock960 family (rock960+ficus) got their power-tree cleaned to match
the schematics and also got hdmi-audio and their gpu enabled.

Mali support also got enabled on the RockPi4 and finally both
rk3328-rock64 and rk3328-roc-cc got some additional features.

* tag 'v5.2-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (23 commits)
  arm64: dts: rockchip: Decrease emmc-phy's drive impedance on rk3399-puma
  arm64: dts: rockchip: Define drive-impedance-ohm for RK3399's emmc-phy.
  arm64: dts: rockchip: Disable DCMDs on RK3399's eMMC controller.
  arm64: dts: rockchip: Add nanopi4 ethernet phy
  arm64: dts: rockchip: Add PWM fan for NanoPC-T4
  arm64: dts: rockchip: Add the fusb typec manager to rk3399-orangepi
  arm64: dts: rockchip: Specify vid supply for the rk3399-orangepi compass (AK09911)
  arm64: dts: rockchip: Fix clock names and add missing supplies for bluetooth on rk3399-orangepi
  arm64: dts: rockchip: Add 12V DCIN regulator to rk3399-ficus
  arm64: dts: rockchip: Rename vcc_sys into vcc5v0_sys on rk3399-rock960
  arm64: dts: rockchip: Add Nanopi NEO4 initial support
  arm64: dts: rockchip: enable hdmi audio out for rk3399-rockpro64
  arm64: dts: rockchip: Add support for the Orange Pi RK3399 board.
  arm64: dts: rockchip: enable mali on rock960 boards
  arm64: dts: rockchip: enable mali on Rock Pi 4
  arm64: dts: rockchip: add rk3328-roc-cc cpu-supply entries for all cpu nodes
  arm64: dts: rockchip: give some life to the rk3328-roc-cc leds
  arm64: dts: rockchip: add #sound-dai-cells to HDMI of rk3328
  arm64: dts: rockchip: add ir-receiver node on rk3328-rock64
  arm64: dts: rockchip: add leds node on rk3328-rock64
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'v5.2-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt

Quite a bit of love for the rk3288-veyron chromeos devices and a number
of cleanups for rk3288 from that area, hdmi support for the old rk3066
a small rv1108-eglin-r1 cleanup and wifi+hdmi-cec for the tinker board.

* tag 'v5.2-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  ARM: dts: rockchip: enable vop0 and hdmi nodes to rk3066a-mk808
  ARM: dts: rockchip: add rk3066 hdmi nodes
  ARM: dts: rockchip: Add device tree for rk3288-veyron-mighty
  dt-bindings: ARM: dts: rockchip: Add bindings for rk3288-veyron-mighty
  ARM: dts: rockchip: Add vdd_logic to rk3288-veyron
  ARM: dts: rockchip: Add dvs-gpios to rk3288-veyron-jerry
  ARM: dts: rockchip: Add rk3288-veyron-jerry rev 10-15
  dt-bindings: ARM: dts: rockchip: Add rk3288-veyron-jerry rev 10-15
  ARM: dts: rockchip: Fix gic/efuse sort ordering for rk3288
  ARM: dts: rockchip: Enable WiFi on rk3288-tinker
  ARM: dts: rockchip: add grf reference in rk3288 tsadc node
  ARM: dts: rockchip: Enable HDMI CEC on rk3288-tinker-s
  ARM: dts: rockchip: remove disable-wp from rv1108-elgin-r1 emmc node
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'amlogic-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt

ARM: dts: Amlogic updates for v5.2
 - add GPIO line names for odroid-c1 boards
 - support internal clock measure driver

* tag 'amlogic-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
  ARM: dts: meson8b: odroidc1: add the GPIO line names
  ARM: dts: meson8b: add the internal clock measurer
  ARM: dts: meson8: add the internal clock measurer
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'amlogic-dt64' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt

arm64: dts: Amlogic updates for v5.2

Highlights
- new board: SEI Robotics 510, based on S905X2 SoC (G12A)
- enable more periphearls for S905X2 based boards

* tag 'amlogic-dt64' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
  arm64: dts: meson-g12a: Add CMA reserved memory
  arm64: dts: meson-g12a-x96-max: Enable BT Module
  arm64: dts: meson-g12a-x96-max: add regulators
  arm64: dts: meson-g12a-sei510: add regulators
  arm64: dts: meson-g12a-x96-max: add uart_AO pinctrl
  arm64: dts: meson-g12a-sei510: add uart_AO pinctrl
  arm64: dts: meson-g12a-u200: add uart_AO pinctrl
  arm64: dts: meson: g12a: Add UART A, B & C nodes and pins
  arm64: dts: meson: g12a: add reset controller
  arm64: dts: meson: g12a: add uart_ao_a pinctrl
  arm64: dts: meson: g12a: add pinctrl support controllers
  arm64: dts: meson: g12a: Add AO Clock + Reset Controller support
  arm64: dts: meson-gxm-nexbox-a1: Enable USB
  arm64: dts: meson: g12a: add efuse
  arm64: dts: meson: g12a: add secure monitor
  arm64: dts: meson-gxl-s905d-phicomm-n1: add status LED
  arm64: dts: meson-g12a: Add AO Secure node
  arm64: dts: Add SEI Robotics SEI510 Board
  vendor-prefixes: Add prefix for Shenzhen SEI Robotics Co., Ltd
Signed-off-by: Olof Johansson <olof@lixom.net>

Enable CEC (Consumer Electronics Control) device.
Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

Add a new pin muxing for cec.
Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

Add ltdc pins muxing on stm32mp157.
Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

Add I2C sleep pins muxing for low power mode.
Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com>
Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

This patch adds a new property (power-supply) to panel otm8009a (orisetech)
on stm32mp157c-dk2  & regulator v3v3.
Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

This patch enables clocks for STM32F769 boards.
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

This patch adds stpmic1 support on stm32mp157a dk1 board.
The STPMIC1 is a PMIC from STMicroelectronics. The STPMIC1 integrates 10
regulators, 3 power switches, a watchdog and an input for a power on key.
The DMAs are disabled because the PMIC generates a very few traffic and
DMA channels may lack for other usage.
Signed-off-by: Pascal Paillet <p.paillet@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

This patch adds stpmic1 support on stm32mp157c ed1 board.
The STPMIC1 is a PMIC from STMicroelectronics. The STPMIC1 integrates 10
regulators, 3 power switches, a watchdog and an input for a power on key.
The DMAs are disabled because the PMIC generates a very few traffic and
DMA channels may lack for other usage.
Signed-off-by: Pascal Paillet <p.paillet@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

This patch adds spdifrx support on stm32mp157c eval board.
Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

This patch adds support of STM32 SPDIFRX on
stm32mp157c.
Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

Add & enable stm32 factory-programmed memory. Describe temperature sensor
calibration cells.
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

Add & enable stm32 factory-programmed memory. Describe temperature sensor
calibration cells. Non-volatile calibration data is made available by
stm32mp157c bootrom in bsec_dataX registers.
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

STM32 syscfg needs a clock to access registers.
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

Enable STM32 IPCC mailbox driver for STM32MP157a-dk1 board.
Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

Enable STM32 IPCC mailbox driver for STM32MP157c-ed1 board.
Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

Add configuration on DT for IPCC mailbox driver.
Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

This patch adds sdmmc1 support on stm32mp157a dk1 board.
Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

This patch adds sdmmc1 support on stm32mp157c ed1 board.
Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

This patch adds support of sdmmc1 on stm32mp157c.
Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

This patch adds sdmmc1 support on stm32h743i disco board.
Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

This patch adds sdmmc1 support on stm32h743i eval board.
This board has an external driver to control signal direction polarity.
Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

This patch adds support of sdmmc1 on stm32h743.
Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

The ASPEED ast2400 and ast2500 both contain an on board RTC device.
Signed-off-by: Joel Stanley <joel@jms.id.au>

Add simplified partitions for BMC and alternate flash. Include these by
default in Witherspoon.
Signed-off-by: Edward A. James <eajames@us.ibm.com>
Signed-off-by: Adriana Kobylak <anoo@us.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>

Bind aspeed ADC channels 0-7 to "iio-hwmon" driver so the data of these
voltage sensing channels can be accessed by "lm_sensors". Channels 8-15
are not used on CMM BMC.
Signed-off-by: Tao Ren <taoren@fb.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>

Enabling vuart for Facebook tiogapass
Signed-off-by: Vijay Khemka <vijaykhemka@fb.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>

Add a node to describe the video engine on the AST2500.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>

The GFX controller is the internal graphics device used by the SoC
(opposed to the one connected via the PCIe device and used by the host).

This configures it with a framebuffer region and adds it to the command
line so kernel boot messages appear on the display.

Enabled for Romulus, Witherspoon, and the ASPEED AST2500 EVB.
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>

The ast2500 has a reset for the CRT device that must be deasserted
before it can be used. Similarly it has a clock gate for a clock called
D1CLK that must be set to running.
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>

Enable the virtual USB hub.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>

The flash_memory region was incorrect and exceeds AST2400's RAM range.
Fix it by putting it before coldfire region, and aligned with 32MiB.
Signed-off-by: Lei YU <mine260309@gmail.com>
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>

Move to the openbmc-flash-layout.dtsi file.
Signed-off-by: Joel Stanley <joel@jms.id.au>