Skip to content

L
linux
Switch branch/tag
  1. 20 Jun, 2017 11 commits
    • Arnaldo Carvalho de Melo's avatar
      perf evsel: Adopt find_process() · 2157f6ee
      Arnaldo Carvalho de Melo authored 
      And make it static, nobody else uses it, if we ever need it in more
places we can carve a new source file for process related methods,
for now lets reduce util.{c,h} a tad more.

Link: http://lkml.kernel.org/n/tip-zgb28rllvypjibw52aaz9p15@git.kernel.orgSigned-off-by: default avatarArnaldo Carvalho de Melo <acme@redhat.com>
      2157f6ee
    • Ingo Molnar's avatar
      Merge tag 'perf-core-for-mingo-4.13-20170719' of... · 007b811b
      Ingo Molnar authored 
      Merge tag 'perf-core-for-mingo-4.13-20170719' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core

Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:

User visible changes:

- Allow adding and removing fields to the default 'perf script' columns,
  using + or - as field prefixes to do so (Andi Kleen)

- Display titles in left frame in the annotate browser (Jin Yao)

- Allow resolving the DSO name with 'perf script -F brstack{sym,off},dso'
  (Mark Santaniello)

- Support function filtering in 'perf ftrace' (Namhyung Kim)

- Allow specifying function call depth in 'perf ftrace' (Namhyumg Kim)

Infrastructure changes:

- Adopt __noreturn, __printf, __scanf, noinline, __packed and __aligned
  __alignment__(()) markers, to make the tools/ source code base to be
  more compact and look more like kernel code (Arnaldo Carvalho de Melo)

- Remove unnecessary check in annotate_browser_write() (Jin Yao)

- Return arch from symbol__disassemble() so that callers, such as
  the annotate TUI browser to use arch specific formattings, such
  as the upcoming instruction micro-op fusion on Intel Core (Jin Yao)

- Remove superfluous check before use in the coresight code base (Kim
  Phillips)

- Remove unused SAMPLE_SIZE defines and BTS priv array (Kim Phillips)

- Error handling fix/tidy ups in 'perf config' (Taeung Song)

- Avoid error in the BPF proggie built with clang in 'perf test llvm'
  when PROFILE_ALL_BRANCHES is set (Wang Nan)
Signed-off-by: default avatarArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: default avatarIngo Molnar <mingo@kernel.org>
      007b811b
    • Ingo Molnar's avatar
      Merge tag 'v4.12-rc6' into perf/core, to pick up fixes · 2eb0fc9b
      Ingo Molnar authored 
      Signed-off-by: default avatarIngo Molnar <mingo@kernel.org>
      2eb0fc9b
    • Taeung Song's avatar
      perf config: Refactor the code using 'ret' variable in cmd_config() · dfe1c6d7
      Taeung Song authored 
      To simplify the code related to 'ret' variable in cmd_config(),
initialize 'ret' with -1 instead of 0 and use goto to perform resource
release at the end of the function, setting ret to zero just before the
out_err label, as usual in the kernel sources.
Signed-off-by: default avatarTaeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1497671202-20495-1-git-send-email-treeze.taeung@gmail.comSigned-off-by: default avatarArnaldo Carvalho de Melo <acme@redhat.com>
      dfe1c6d7
    • Taeung Song's avatar
      perf config: Check error cases of {show_spec, set}_config() · 4f1fd742
      Taeung Song authored 
      show_spec_config() and set_config() can be called multiple times
in the loop in cmd_config().

However, The error cases of them wasn't checked, so fix it.
Reported-by: default avatarArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: default avatarTaeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1497671197-20450-1-git-send-email-treeze.taeung@gmail.comSigned-off-by: default avatarArnaldo Carvalho de Melo <acme@redhat.com>
      4f1fd742
    • Namhyung Kim's avatar
      perf ftrace: Add -D option for depth filter · 1096c35a
      Namhyung Kim authored 
      The -D/--graph-depth option is to set max graph depth.  The following
example traces max 2-depth of page fault handler.

  $ sudo perf ftrace -G __do_page_fault -D 2 -- hello
   ...
   0)               |  __do_page_fault() {
   0)   0.063 us    |    down_read_trylock();
   0)   0.251 us    |    find_vma();
   0)   5.374 us    |    handle_mm_fault();
   0)   0.054 us    |    up_read();
   0)   7.463 us    |  }
   ...
Signed-off-by: default avatarNamhyung Kim <namhyung@kernel.org>
Tested-by: default avatarArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20170618142302.25390-4-namhyung@kernel.orgSigned-off-by: default avatarArnaldo Carvalho de Melo <acme@redhat.com>
      1096c35a
    • Namhyung Kim's avatar
      perf ftrace: Add option for function filtering · 78b83e8b
      Namhyung Kim authored 
      The -T/--trace-funcs and -N/--notrace-funcs options are to specify
functions to enable/disable tracing dynamically.

The -G/--graph-funcs and -g/--nograph-funcs options are to set filters
for function graph tracer.

For example, to trace fault handling functions only:

  $ sudo perf ftrace -T *fault hello
   0)               |  __do_page_fault() {
   0)               |    handle_mm_fault() {
   0)   2.117 us    |      __handle_mm_fault();
   0)   3.627 us    |    }
   0)   7.811 us    |  }
   0)               |  __do_page_fault() {
   0)               |    handle_mm_fault() {
   0)   2.014 us    |      __handle_mm_fault();
   0)   2.424 us    |    }
   0)   2.951 us    |  }
   ...

To trace all functions executed in __do_page_fault:

  $ sudo perf ftrace -G __do_page_fault hello
   2)               |  __do_page_fault() {
   3)   0.060 us    |    down_read_trylock();
   3)               |    find_vma() {
   3)   0.075 us    |      vmacache_find();
   3)   0.053 us    |      vmacache_update();
   3)   1.246 us    |    }
   3)               |    handle_mm_fault() {
   3)   0.063 us    |      __rcu_read_lock();
   3)   0.056 us    |      mem_cgroup_from_task();
   3)   0.057 us    |      __rcu_read_unlock();
   3)               |      __handle_mm_fault() {
   3)               |        filemap_map_pages() {
   3)   0.058 us    |          __rcu_read_lock();
   3)               |          alloc_set_pte() {
   ...

But don't want to show details in handle_mm_fault:

  $ sudo perf ftrace -G __do_page_fault -g handle_mm_fault hello
   3)               |  __do_page_fault() {
   3)   0.049 us    |    down_read_trylock();
   3)               |    find_vma() {
   3)   0.048 us    |      vmacache_find();
   3)   0.041 us    |      vmacache_update();
   3)   0.680 us    |    }
   3)   0.036 us    |    up_read();
   3)   4.547 us    |  } /* __do_page_fault */
   ...
Signed-off-by: default avatarNamhyung Kim <namhyung@kernel.org>
Tested-by: default avatarArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20170618142302.25390-3-namhyung@kernel.orgSigned-off-by: default avatarArnaldo Carvalho de Melo <acme@redhat.com>
      78b83e8b
    • Namhyung Kim's avatar
      perf ftrace: Move setup_pager before opening trace_pipe · 29681bc5
      Namhyung Kim authored 
      The 'perf ftrace' command fails to reset tracer after finishing
recording like below:

  $ sudo perf ftrace -v hello
  write 'nop' to tracing/current_tracer failed: Device or resource busy
  ...

This is because the trace_pipe file is open in pager process.  Move the
pager setup to before opening the file.
Signed-off-by: default avatarNamhyung Kim <namhyung@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: kernel-team@lge.com
Fixes: 58335964 ("perf ftrace: Use pager for displaying result")
Link: http://lkml.kernel.org/r/20170618142302.25390-2-namhyung@kernel.orgSigned-off-by: default avatarArnaldo Carvalho de Melo <acme@redhat.com>
      29681bc5
    • Namhyung Kim's avatar
      perf ftrace: Show error message when fails to set ftrace files · e7bd9ba2
      Namhyung Kim authored 
      It'd be better for debugging to show an error message when it fails to
setup ftrace for some reason.
Signed-off-by: default avatarNamhyung Kim <namhyung@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20170618142302.25390-1-namhyung@kernel.orgSigned-off-by: default avatarArnaldo Carvalho de Melo <acme@redhat.com>
      e7bd9ba2
    • Mark Santaniello's avatar
      perf script: Support -F brstackoff,dso · 106dacd8
      Mark Santaniello authored 
      The idea here is to make AutoFDO easier in cloud environment with ASLR.
It's easiest to show how this is useful by example. I built a small test
akin to "while(1) { do_nothing(); }" where the do_nothing function is
loaded from a dso:

  $ cat burncpu.cpp
  #include <dlfcn.h>

  int main() {
    void* handle = dlopen("./dso.so", RTLD_LAZY);
    if (!handle) return -1;

    typedef void (*fp)();
    fp do_nothing = (fp) dlsym(handle, "do_nothing");

    while(1) {
      do_nothing();
    }
  }

  $ cat dso.cpp
  extern "C" void do_nothing() {}

  $ cat build.sh
  #!/bin/bash
  g++ -shared dso.cpp -o dso.so
  g++ burncpu.cpp -o burncpu -ldl

I sampled the execution of this program with perf record -b.

Using the existing "brstack,dso", we get absolute addresses that are
affected by ASLR, and could be different on different hosts. The address
does not uniquely identify a branch/target in the binary:

  $ perf script -F brstack,dso | sed 's/\/0 /\/0\n/g' | grep burncpu | grep dso.so | head -n 1
  0x7f967139b6aa(/tmp/burncpu/dso.so)/0x4006b1(/tmp/burncpu/exe)/P/-/-/0

Using the existing "brstacksym,dso" is a little better, because the
symbol plus offset and dso name *does* uniquely identify a branch/target
in the binary.  Ultimately, however, AutoFDO wants a simple offset into
the binary, so we'd have to undo all the work perf did to symbolize in
the first place:

  $ perf script -F brstacksym,dso | sed 's/\/0 /\/0\n/g' | grep burncpu | grep dso.so | head -n 1
  do_nothing+0x5(/tmp/burncpu/dso.so)/main+0x44(/tmp/burncpu/exe)/P/-/-/0

With the new "brstackoff,dso" we get what we need: a simple offset into a
specific dso/binary that uniquely identifies a branch/target:
  $ perf script -F brstackoff,dso | sed 's/\/0 /\/0\n/g' | grep burncpu | grep dso.so | head -n 1
  0x6aa(/tmp/burncpu/dso.so)/0x4006b1(/tmp/burncpu/exe)/P/-/-/0
Signed-off-by: default avatarMark Santaniello <marksan@fb.com>
Tested-by: default avatarArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170619163825.2012979-2-marksan@fb.com
[ Updated documentation about 'brstackoff' using text from above ]
Signed-off-by: default avatarArnaldo Carvalho de Melo <acme@redhat.com>
      106dacd8
    • Mark Santaniello's avatar
      perf script: Support -F brstack,dso and brstacksym,dso · 55b9b508
      Mark Santaniello authored 
      Perf script can report the dso for "addr" and "ip" fields.

This adds the same support for the "brstack" and "brstacksym" fields.
This can be helpful for AutoFDO: we can ignore LBR entries unless the
source and target address are both in the target module we are about to
build.

I built a small test akin to "while(1) { do_nothing(); }" where the
do_nothing function is loaded from a dso:

  $ cat burncpu.cpp
  #include <dlfcn.h>

  int main() {
    void* handle = dlopen("./dso.so", RTLD_LAZY);
    if (!handle) return -1;

    typedef void (*fp)();
    fp do_nothing = (fp) dlsym(handle, "do_nothing");

    while(1) {
      do_nothing();
    }
  }

  $ cat dso.cpp
  extern "C" void do_nothing() {}

  $ cat build.sh
  #!/bin/bash
  g++ -shared dso.cpp -o dso.so
  g++ burncpu.cpp -o burncpu -ldl

I sampled the execution with perf record -b.  Using the new perf script
functionality I can easily find cases where there was a transition from one
dso to another:

  $ perf record -a -b -- sleep 5
  [ perf record: Woken up 55 times to write data ]
  [ perf record: Captured and wrote 18.815 MB perf.data (43593 samples) ]

  $ perf script -F brstack,dso | sed 's/\/0 /\/0\n/g' | grep burncpu | grep dso.so | head -n 1
  0x7f967139b6aa(/tmp/burncpu/dso.so)/0x4006b1(/tmp/burncpu/exe)/P/-/-/0

  $ perf script -F brstacksym,dso | sed 's/\/0 /\/0\n/g' | grep burncpu | grep dso.so | head -n 1
  do_nothing+0x5(/tmp/burncpu/dso.so)/main+0x44(/tmp/burncpu/exe)/P/-/-/0
Signed-off-by: default avatarMark Santaniello <marksan@fb.com>
Tested-by: default avatarArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170619163825.2012979-1-marksan@fb.comSigned-off-by: default avatarArnaldo Carvalho de Melo <acme@redhat.com>
      55b9b508
  3. 19 Jun, 2017 24 commits
  5. 18 Jun, 2017 5 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7