- 25 Jul, 2017 3 commits
-
-
Lorenzo Bianconi authored
Signed-off-by:
Lorenzo Bianconi <lorenzo.bianconi@st.com> Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Lorenzo Bianconi authored
Add open drain support in order to share requested IRQ line between hts221 device and other peripherals Signed-off-by:
-
Alexander Sverdlin authored
New driver adding support for ADC found on Cirrus Logic EP93xx series of SoCs. Board specific code must take care to create plaform device with all necessary resources. Signed-off-by:
Alexander Sverdlin <alexander.sverdlin@gmail.com> Acked-by:
Jonathan Cameron <jic23@kernel.org> Signed-off-by:
-
- 22 Jul, 2017 10 commits
-
-
Rob Herring authored
Now that we have a custom printf format specifier, convert users of full_name to use %pOF instead. This is preparation to remove storing of the full path string for each node. Signed-off-by:
-
Jaya Durga authored
CHECK: Macro argument reuse 'addr' - possible side-effects? convert AD7280A_DEVADDR to ad7280a_devaddr static function to fix checkpath check v3: small style changes Signed-off-by:
Jaya Durga <rjdurga@gmail.com> Signed-off-by:
-
Lorenzo Bianconi authored
Update hts221 device binding with active-low interrupts support (IRQ_TYPE_LEVEL_LOW and IRQ_TYPE_EDGE_FALLING). Acked-by:
-
Lorenzo Bianconi authored
Add support for active low interrupts (IRQF_TRIGGER_LOW and IRQF_TRIGGER_FALLING). Configure the device as active high or low according to the requested irq line. Signed-off-by:
-
Lorenzo Bianconi authored
Signed-off-by:
-
Lorenzo Bianconi authored
Configure sensor ODR just in hts221_write_raw() in order to avoid to set device sample rate multiple times. Signed-off-by:
-
Lorenzo Bianconi authored
GENMASK(6, 3) in CTRL_REG1 and GENMASK(6, 2) in CTRL_REG2 are marked reserved. Do not changed the original value (not declared in the datasheet) during power-down/suspend routines. Fixes: e4a70e3e (iio: humidity: add support to hts221 rh/temp device) Fixes: b7079eea (iio: humidity: hts221: add power management support) Signed-off-by:
-
Lorenzo Bianconi authored
Enable Block Data Update in hts221_probe() in order to avoid to reconfigure it every time the sensor is enabled Signed-off-by:
-
Lorenzo Bianconi authored
Move bit-shift in hts221_write_with_mask() instead of coding the shift depth in the configured value. That change will be necessary to fix an issue in device power-down procedure. Simplify hts221_avg_list table management Signed-off-by:
-
Narcisa Ana Maria Vasile authored
Add support for CCS811 VOC sensor. This patch adds support for reading current and voltage across the sensor and TVOC and equivalent CO2 values. Scale and offset values have been computed according to datasheet: - For current: raw value is in microamps => 0.001 scale to convert to milliamps - For voltage: 1.65V = 1023, therefore 1650mV = 1023 => 1650.0/1023 = 1.612903 scale to convert to millivolts - For eCO2: raw value range is from 400ppm to 8192ppm. => (val - 400) * (100 - 0) / (8192 - 400) + 0 = (val - 400) * 0.01283367 => offset: -400, scale = 0.012834 to get a percentage value -For TVOC: raw value range is from 0ppb to 1187ppb. => (val - 0) * 100 / (1187 - 0) + 0 = val * 0.0842459 => scale = 0.084246 for getting a percentage value Cc: Daniel Baluta <daniel.baluta@gmail.com> Cc: Alison Schofield <amsfield22@gmail.com> Signed-off-by:Narcisa Ana Maria Vasile <narcisaanamaria12@gmail.com> Signed-off-by:
-
- 17 Jul, 2017 3 commits
-
-
Stefan Brüns authored
Commit c43a102e ("iio: ina2xx: add support for TI INA2xx Power Monitors") introduced the in_powerY_raw attribute, but omitted the corresponding documentation. The description is correct for the INA2xx and the MAX9611 IIO drivers. Signed-off-by:
Stefan Brüns <stefan.bruens@rwth-aachen.de> Signed-off-by:
-
Fabio Estevam authored
The gpiod API checks for NULL descriptors, so there is no need to duplicate the check in the driver. Signed-off-by:
Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by:
-
Julia Lawall authored
Drop static on a local variable, when the variable is initialized before any possible use. Thus, the static has no benefit. The semantic patch that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @bad exists@ position p; identifier x; type T; @@ static T x@p; ... x = <+...x...+> @@ identifier x; expression e; type T; position p != bad.p; @@ -static T x@p; ... when != x when strict ?x = e; // </smpl> Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by:
-
- 15 Jul, 2017 4 commits
-
-
Gaurav Gupta authored
When adding maps to the list, they were added using list_add, which adds them in LIFO order. When parsing using iio_channel_get_all(), these elements are hence returned in reverse order. As a result, the iio_hwmon mapping maps the first entry to the last channel and so on. Signed-off-by:
Gaurav Gupta <gauragup@cisco.com> Signed-off-by:
-
Fabrice Gasnier authored
This adds support for STM32F4 Digital-To-Analog converter. Add compatible configuration data to handle hfsel (not present in stm32f4). Signed-off-by:
Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by:
-
Fabrice Gasnier authored
Fix error message, there's no 'st,dac-channel' property, but 'reg' (see https://lkml.org/lkml/2017/4/3/567). Signed-off-by:
-
Fabrice Gasnier authored
Introduce new compatible to support STM32F4 DAC (Digital-To-Analog converter) variant. Signed-off-by:
-
- 10 Jul, 2017 1 commit
-
-
Colin Ian King authored
Don't populate array startup_lookup on the stack but instead make it static. Makes the object code smaller. Before: text data bss dec hex filename 21754 5440 128 27322 6aba drivers/iio/adc/at91_adc.o After: text data bss dec hex filename 21613 5496 128 27237 6a65 drivers/iio/adc/at91_adc.o Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
- 09 Jul, 2017 15 commits
-
-
Lorenzo Bianconi authored
In order to use the standard name convention rename H3LIS331DL_DRIVER_NAME macro in H3LIS331DL_ACCEL_DEV_NAME Signed-off-by:
-
Lorenzo Bianconi authored
Signed-off-by:
-
Lorenzo Bianconi authored
Add H3LIS331DL, LIS331DL and LIS3LV02DL entries in st_accel_id_table Fixes: 1e52fefc (iio: accel: Add support for the h3lis331dl accel) Fixes: bbf5f037 (iio: st_accel: support the LIS331DL sensor) Fixes: 3acddf74 (iio: st-sensors: add support for lis3lv02d accel) Signed-off-by:
-
Colin Ian King authored
Making the const array startup_lookup static rather having it on the stack saves 69 bytes. Add in missing int specifier to clean up a checkpatch warning. Before: text data bss dec hex filename 10297 2800 128 13225 33a9 drivers/iio/adc/at91-sama5d2_adc.o After: text data bss dec hex filename 10140 2888 128 13156 3364 drivers/iio/adc/at91-sama5d2_adc.o Signed-off-by:
-
Colin Ian King authored
Making the const array init_data static rather having it on the stack saves us a couple hundreds of bytes: Before: text data bss dec hex filename 3175 848 0 4023 fb7 drivers/iio/accel/da311.o After: text data bss dec hex filename 2860 936 0 3796 ed4 drivers/iio/accel/da311.o Signed-off-by:
-
Gustavo A. R. Silva authored
Check return value from call to of_match_device() in order to prevent a NULL pointer dereference. In case of NULL print error message and return -ENODEV Signed-off-by:
Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by:
-
Gustavo A. R. Silva authored
Check return value from call to of_match_device() in order to prevent a NULL pointer dereference. In case of NULL print error message and return -ENODEV Signed-off-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by:
-
Brian Masney authored
The return value from tsl2x7x_invoke_change() was not checked in most places in the driver. This patch adds the proper error checks. The return values inside tsl2x7x_invoke_change() are now checked by this patch as well. Previously, if there was an error turning the chip back on, then the driver would attempt to turn the chip off and incorrectly return success. The code to power off the chip is removed by this patch since we should fail fast. Signed-off-by:
Brian Masney <masneyb@onstation.org> Signed-off-by:
-
Brian Masney authored
This driver in some cases can busy wait for upwards of 15ms. Since the kernel at this point is not running in atomic context, and is running in process context, we can safely use usleep_range() instead. This patch changes the two occurrences of mdelay() to usleep_range(). Signed-off-by:
-
Brian Masney authored
tsl2x7x_read_thresh() and tsl2x7x_write_thresh() currently assumes that IIO_EV_INFO_VALUE is the only iio_event_info that will be passed in. This patch refactors these two functions so that additional iio_event_infos can be passed in. The functions are renamed from tsl2x7x_{read,write}_thresh() to tsl2x7x_{read,write}_event_value(). This patch also adds the missing return value check to tsl2x7x_invoke_change() since this was previously missing. This patch is in preparation for moving the in_intensity0_thresh_period and in_proximity0_thresh_period sysfs attributes to be created by iio_event_spec. Signed-off-by: -
Brian Masney authored
The calibration function calls i2c_smbus_write_byte() and i2c_smbus_read_byte(). These two function calls are replaced with a single call to i2c_smbus_read_byte_data() by this patch. This patch also removes an unnecessary call that reads the CNTRL register a second time. One of the error paths returned -1 if the ADC was not enabled and this patch changes that return value to -EINVAL. Signed-off-by:
-
Brian Masney authored
tsl2x7x_i2c_read() would call i2c_smbus_write_byte() and i2c_smbus_read_byte(). These two i2c functions can be replaced with a single call to i2c_smbus_read_byte_data(). This patch removes the tsl2x7x_i2c_read() function and replaces all occurrences with a call to i2c_smbus_read_byte_data(). Signed-off-by:
-
Brian Masney authored
The TSL2X7X driver has a custom power_state sysfs attribute. Remove this attribute since the runtime power management code provides a sysfs attribute to control the power state of the device. Signed-off-by:
-
Brian Masney authored
Add device tree support for the tsl2x7x IIO driver with no custom properties. The device tree documentation is in a separate commit so that the changes to trivial-devices.txt can go in via the device tree subsystem. Signed-off-by:
-
Jack Andersen authored
This patch adds support for Diolan DLN2 ADC via IIO's ADC interface. ADC is the fourth and final component of the DLN2 for the kernel. Signed-off-by:
Jack Andersen <jackoalan@gmail.com> Signed-off-by:
-
- 06 Jul, 2017 1 commit
-
-
Joe Perches authored
Add newlines to the macro definitions and use a more common style. Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
- 04 Jul, 2017 2 commits
-
-
Mike Looijmans authored
The LTC2741 and LTC2473 are single voltage ADC chips. The LTC2473 is similar to the LTC2471 but outputs a signed differential value. Datasheet: http://cds.linear.com/docs/en/datasheet/24713fb.pdfSigned-off-by:
Mike Looijmans <mike.looijmans@topic.nl> Reviewed-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
-
Mikko Koivunen authored
Set up and use triggered buffer if there is irq defined for device in device tree. Trigger producer triggers from rpr0521 drdy interrupt line. Trigger consumer reads rpr0521 data to scan buffer. Depends on previous commits of _scale and _offset. Signed-off-by:
Mikko Koivunen <mikko.koivunen@fi.rohmeurope.com> Signed-off-by:
-
- 02 Jul, 2017 1 commit
-
-
Reno Farnesi authored
This patch fixes the following checkpatch warnings: Prefer 'unsigned int' to bare use of 'unsigned Signed-off-by:
Reno Farnesi <nfarnesi4@gmail.com> Signed-off-by:
-
