Currently, the UDP GRO code path does bad things on some edge
conditions - Aggregation can happen even on packet with different
lengths.

Fix the above by rewriting the 'complete' condition for GRO
packets. While at it, note explicitly that we allow merging the
first packet per burst below gso_size.
Reported-by: Sean Tong <seantong114@gmail.com>
Fixes: e20cf8d3 ("udp: implement GRO for plain UDP sockets.")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jakub Kicinski says:

====================
net/tls: fix data copies in tls_device_reencrypt()

This series fixes the tls_device_reencrypt() which is broken
if record starts in the frags of the message skb.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Fragments may contain data from other records so we have to account
for that when we calculate the destination and max length of copy we
can perform.  Note that 'offset' is the offset within the message,
so it can't be passed as offset within the frag..

Here skb_store_bits() would have realised the call is wrong and
simply not copy data.

Fixes: 4799ac81 ("tls: Add rx inline crypto offload")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: John Hurley <john.hurley@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There is no guarantee the record starts before the skb frags.
If we don't check for this condition copy amount will get
negative, leading to reads and writes to random memory locations.
Familiar hilarity ensues.

Fixes: 4799ac81 ("tls: Add rx inline crypto offload")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: John Hurley <john.hurley@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Michael Chan says:

====================
bnxt_en: Misc. bug fixes.

6 miscellaneous bug fixes covering several issues in error code paths,
a setup issue for statistics DMA, and an improvement for setting up
multicast address filters.

Please queue these for stable as well.
Patch #5 (bnxt_en: Fix statistics context reservation logic) is for the
most recent 5.0 stable only.  Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

In bnxt_rx_pkt(), if the driver encounters BD errors, it will recycle
the buffers and jump to the end where the uninitailized variable "len"
is referenced.  Fix it by adding a new jump label that will skip
the length update.  This is the most correct fix since the length
may not be valid when we get this type of error.

Fixes: 6a8788f2 ("bnxt_en: add support for software dynamic interrupt moderation")
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In an earlier commit that fixes the number of stats contexts to
reserve for the RDMA driver, we added a function parameter to pass in
the number of stats contexts to all the relevant functions.  The passed
in parameter should have been used to set the enables field of the
firmware message.

Fixes: 780baad4 ("bnxt_en: Reserve 1 stat_ctx for RDMA driver.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If driver determines that extended TX port statistics are not supported
or allocation of the data structure fails, make sure to pass 0 TX stats
size to firmware to disable it.  The firmware returned TX stats size should
also be set to 0 for consistency.  This will prevent
bnxt_get_ethtool_stats() from accessing the NULL TX stats pointer in
case there is mismatch between firmware and driver.

Fixes: 36e53349 ("bnxt_en: Add additional extended port statistics.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If we encounter errors during open and proceed to clean up,
bnxt_hwrm_ring_free() may crash if the rings we try to free have never
been allocated.  bnxt_cp_ring_for_rx() or bnxt_cp_ring_for_tx()
may reference pointers that have not been allocated.

Fix it by checking for valid fw_ring_id first before calling
bnxt_cp_ring_for_rx() or bnxt_cp_ring_for_tx().

Fixes: 2c61d211 ("bnxt_en: Add helper functions to get firmware CP ring ID.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In the bnxt_init_one() error path, short FW command request memory
is not freed. This patch fixes it.

Fixes: e605db80 ("bnxt_en: Support for Short Firmware Message")
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The driver builds a list of multicast addresses and sends it to the
firmware when the driver's ndo_set_rx_mode() is called.  In rare
cases, the firmware can fail this call if internal resources to
add multicast addresses are exhausted.  In that case, we should
try the call again by setting the ALL_MCAST flag which is more
guaranteed to succeed.

Fixes: c0c050c5 ("bnxt_en: New Broadcom ethernet driver.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

marvell_get_sset_count() returns how many statistics counters there
are. If the PHY supports fibre, there are 3, otherwise two.

marvell_get_strings() does not make this distinction, and always
returns 3 strings. This then often results in writing past the end
of the buffer for the strings.

Fixes: 2170fef7 ("Marvell phy: add field to get errors from fiber link.")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When allocating the next family->id it makes more sense to use
idr_alloc_cyclic to avoid re-using a previously used family->id as much
as possible.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Adding device entries found in vendor modified versions of this
driver.  Function maps for some of the devices follow:

WNC D16Q1, D16Q5, D18Q1 LTE CAT3 module (1435:0918)

MI_00 Qualcomm HS-USB Diagnostics
MI_01 Android Debug interface
MI_02 Qualcomm HS-USB Modem
MI_03 Qualcomm Wireless HS-USB Ethernet Adapter
MI_04 Qualcomm Wireless HS-USB Ethernet Adapter
MI_05 Qualcomm Wireless HS-USB Ethernet Adapter
MI_06 USB Mass Storage Device

 T:  Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=480 MxCh= 0
 D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
 P:  Vendor=1435 ProdID=0918 Rev= 2.32
 S:  Manufacturer=Android
 S:  Product=Android
 S:  SerialNumber=0123456789ABCDEF
 C:* #Ifs= 7 Cfg#= 1 Atr=80 MxPwr=500mA
 I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
 E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
 E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
 I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
 E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
 E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
 I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
 E:  Ad=84(I) Atr=03(Int.) MxPS=  64 Ivl=32ms
 E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
 E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
 I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
 E:  Ad=86(I) Atr=03(Int.) MxPS=  64 Ivl=32ms
 E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
 E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
 I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
 E:  Ad=88(I) Atr=03(Int.) MxPS=  64 Ivl=32ms
 E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
 I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
 E:  Ad=8a(I) Atr=03(Int.) MxPS=  64 Ivl=32ms
 E:  Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
 E:  Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

WNC D18 LTE CAT3 module (1435:d182)

MI_00 Qualcomm HS-USB Diagnostics
MI_01 Androd Debug interface
MI_02 Qualcomm HS-USB Modem
MI_03 Qualcomm HS-USB NMEA
MI_04 Qualcomm Wireless HS-USB Ethernet Adapter
MI_05 Qualcomm Wireless HS-USB Ethernet Adapter
MI_06 USB Mass Storage Device

ZM8510/ZM8620/ME3960 (19d2:0396)

MI_00 ZTE Mobile Broadband Diagnostics Port
MI_01 ZTE Mobile Broadband AT Port
MI_02 ZTE Mobile Broadband Modem
MI_03 ZTE Mobile Broadband NDIS Port (qmi_wwan)
MI_04 ZTE Mobile Broadband ADB Port

ME3620_X (19d2:1432)

MI_00 ZTE Diagnostics Device
MI_01 ZTE UI AT Interface
MI_02 ZTE Modem Device
MI_03 ZTE Mobile Broadband Network Adapter
MI_04 ZTE Composite ADB Interface
Reported-by: Lars Melin <larsm17@gmail.com>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>

Manage the -EPROBE_DEFER error case for "stm32_pwr_wakeup"  IRQ.
Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Canonical way to fetch sk_user_data from an encap_rcv() handler called
from UDP stack in rcu protected section is to use rcu_dereference_sk_user_data(),
otherwise compiler might read it multiple times.

Fixes: d00fa9ad ("il2tp: fix races with tunnel socket close")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: James Chapman <jchapman@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Alexei Starovoitov says:

====================
pull-request: bpf 2019-04-25

The following pull-request contains BPF updates for your *net* tree.

The main changes are:

1) the bpf verifier fix to properly mark registers in all stack frames, from Paul.

2) preempt_enable_no_resched->preempt_enable fix, from Peter.

3) other misc fixes.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Unless the very next line is schedule(), or implies it, one must not use
preempt_enable_no_resched(). It can cause a preemption to go missing and
thereby cause arbitrary delays, breaking the PREEMPT=y invariant.

Cc: Roman Gushchin <guro@fb.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

The first test case, for pointer null checks, is equivalent to the
following pseudo-code.  It checks that the verifier does not complain on
line 6 and recognizes that ptr isn't null.

1: ptr = bpf_map_lookup_elem(map, &key);
2: ret = subprog(ptr) {
3:   return ptr != NULL;
4: }
5: if (ret)
6:   value = *ptr;

The second test case, for packet bound checks, is equivalent to the
following pseudo-code.  It checks that the verifier does not complain on
line 7 and recognizes that the packet is at least 1 byte long.

1: pkt_end = ctx.pkt_end;
2: ptr = ctx.pkt + 8;
3: ret = subprog(ptr, pkt_end) {
4:   return ptr <= pkt_end;
5: }
6: if (ret)
7:   value = *(u8 *)ctx.pkt;
Signed-off-by: Paul Chaignon <paul.chaignon@orange.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

In case of a null check on a pointer inside a subprog, we should mark all
registers with this pointer as either safe or unknown, in both the current
and previous frames.  Currently, only spilled registers and registers in
the current frame are marked.  Packet bound checks in subprogs have the
same issue.  This patch fixes it to mark registers in previous frames as
well.

A good reproducer for null checks looks as follow:

1: ptr = bpf_map_lookup_elem(map, &key);
2: ret = subprog(ptr) {
3:   return ptr != NULL;
4: }
5: if (ret)
6:   value = *ptr;

With the above, the verifier will complain on line 6 because it sees ptr
as map_value_or_null despite the null check in subprog 1.

Note that this patch fixes another resulting bug when using
bpf_sk_release():

1: sk = bpf_sk_lookup_tcp(...);
2: subprog(sk) {
3:   if (sk)
4:     bpf_sk_release(sk);
5: }
6: if (!sk)
7:   return 0;
8: return 1;

In the above, mark_ptr_or_null_regs will warn on line 6 because it will
try to free the reference state, even though it was already freed on
line 3.

Fixes: f4d7e40a ("bpf: introduce function calls (verification)")
Signed-off-by: Paul Chaignon <paul.chaignon@orange.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Some binaries are generated when building libbpf from tools/lib/bpf/,
namely libbpf.so.0.0.2 and libbpf.so.0.
Add them to the local .gitignore.
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

"bpftool map create" has an infinite loop on "while (argc)". The error
case is missing.

Symptoms: when forgetting to type the keyword 'type' in front of 'hash':
$ sudo bpftool map create /sys/fs/bpf/dir/foobar hash key 8 value 8 entries 128
(infinite loop, taking all the CPU)
^C

After the patch:
$ sudo bpftool map create /sys/fs/bpf/dir/foobar hash key 8 value 8 entries 128
Error: unknown arg hash

Fixes: 0b592b5a ("tools: bpftool: add map create command")
Signed-off-by: Alban Crequy <alban@kinvolk.io>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Fix sparse warning:

arch/mips/net/ebpf_jit.c:196:5: warning:
 symbol 'ebpf_to_mips_reg' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Pull networking fixes from David Miller:
 "Just the usual assortment of small'ish fixes:

   1) Conntrack timeout is sometimes not initialized properly, from
      Alexander Potapenko.

   2) Add a reasonable range limit to tcp_min_rtt_wlen to avoid
      undefined behavior. From ZhangXiaoxu.

   3) des1 field of descriptor in stmmac driver is initialized with the
      wrong variable. From Yue Haibing.

   4) Increase mlxsw pci sw reset timeout a little bit more, from Ido
      Schimmel.

   5) Match IOT2000 stmmac devices more accurately, from Su Bao Cheng.

   6) Fallback refcount fix in TLS code, from Jakub Kicinski.

   7) Fix max MTU check when using XDP in mlx5, from Maxim Mikityanskiy.

   8) Fix recursive locking in team driver, from Hangbin Liu.

   9) Fix tls_set_device_offload_Rx() deadlock, from Jakub Kicinski.

  10) Don't use napi_alloc_frag() outside of softiq context of socionext
      driver, from Ilias Apalodimas.

  11) MAC address increment overflow in ncsi, from Tao Ren.

  12) Fix a regression in 8K/1M pool switching of RDS, from Zhu Yanjun.

  13) ipv4_link_failure has to validate the headers that are actually
      there because RAW sockets can pass in arbitrary garbage, from Eric
      Dumazet"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (43 commits)
  ipv4: add sanity checks in ipv4_link_failure()
  net/rose: fix unbound loop in rose_loopback_timer()
  rxrpc: fix race condition in rxrpc_input_packet()
  net: rds: exchange of 8K and 1M pool
  net: vrf: Fix operation not supported when set vrf mac
  net/ncsi: handle overflow when incrementing mac address
  net: socionext: replace napi_alloc_frag with the netdev variant on init
  net: atheros: fix spelling mistake "underun" -> "underrun"
  spi: ST ST95HF NFC: declare missing of table
  spi: Micrel eth switch: declare missing of table
  net: stmmac: move stmmac_check_ether_addr() to driver probe
  netfilter: fix nf_l4proto_log_invalid to log invalid packets
  netfilter: never get/set skb->tstamp
  netfilter: ebtables: CONFIG_COMPAT: drop a bogus WARN_ON
  Documentation: decnet: remove reference to CONFIG_DECNET_ROUTE_FWMARK
  dt-bindings: add an explanation for internal phy-mode
  net/tls: don't leak IV and record seq when offload fails
  net/tls: avoid potential deadlock in tls_set_device_offload_rx()
  selftests/net: correct the return value for run_afpackettests
  team: fix possible recursive locking when add slaves
  ...

Merge tag 'leds-for-5.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds

Pull LED update from Jacek Anaszewski:
 "A single change to MAINTAINERS:

  We announce a new LED reviewer - Dan Murphy"

* tag 'leds-for-5.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds:
  MAINTAINERS: LEDs: Add designated reviewer for LED subsystem

Before calling __ip_options_compile(), we need to ensure the network
header is a an IPv4 one, and that it is already pulled in skb->head.

RAW sockets going through a tunnel can end up calling ipv4_link_failure()
with total garbage in the skb, or arbitrary lengthes.

syzbot report :

BUG: KASAN: stack-out-of-bounds in memcpy include/linux/string.h:355 [inline]
BUG: KASAN: stack-out-of-bounds in __ip_options_echo+0x294/0x1120 net/ipv4/ip_options.c:123
Write of size 69 at addr ffff888096abf068 by task syz-executor.4/9204

CPU: 0 PID: 9204 Comm: syz-executor.4 Not tainted 5.1.0-rc5+ #77
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x172/0x1f0 lib/dump_stack.c:113
 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:187
 kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317
 check_memory_region_inline mm/kasan/generic.c:185 [inline]
 check_memory_region+0x123/0x190 mm/kasan/generic.c:191
 memcpy+0x38/0x50 mm/kasan/common.c:133
 memcpy include/linux/string.h:355 [inline]
 __ip_options_echo+0x294/0x1120 net/ipv4/ip_options.c:123
 __icmp_send+0x725/0x1400 net/ipv4/icmp.c:695
 ipv4_link_failure+0x29f/0x550 net/ipv4/route.c:1204
 dst_link_failure include/net/dst.h:427 [inline]
 vti6_xmit net/ipv6/ip6_vti.c:514 [inline]
 vti6_tnl_xmit+0x10d4/0x1c0c net/ipv6/ip6_vti.c:553
 __netdev_start_xmit include/linux/netdevice.h:4414 [inline]
 netdev_start_xmit include/linux/netdevice.h:4423 [inline]
 xmit_one net/core/dev.c:3292 [inline]
 dev_hard_start_xmit+0x1b2/0x980 net/core/dev.c:3308
 __dev_queue_xmit+0x271d/0x3060 net/core/dev.c:3878
 dev_queue_xmit+0x18/0x20 net/core/dev.c:3911
 neigh_direct_output+0x16/0x20 net/core/neighbour.c:1527
 neigh_output include/net/neighbour.h:508 [inline]
 ip_finish_output2+0x949/0x1740 net/ipv4/ip_output.c:229
 ip_finish_output+0x73c/0xd50 net/ipv4/ip_output.c:317
 NF_HOOK_COND include/linux/netfilter.h:278 [inline]
 ip_output+0x21f/0x670 net/ipv4/ip_output.c:405
 dst_output include/net/dst.h:444 [inline]
 NF_HOOK include/linux/netfilter.h:289 [inline]
 raw_send_hdrinc net/ipv4/raw.c:432 [inline]
 raw_sendmsg+0x1d2b/0x2f20 net/ipv4/raw.c:663
 inet_sendmsg+0x147/0x5d0 net/ipv4/af_inet.c:798
 sock_sendmsg_nosec net/socket.c:651 [inline]
 sock_sendmsg+0xdd/0x130 net/socket.c:661
 sock_write_iter+0x27c/0x3e0 net/socket.c:988
 call_write_iter include/linux/fs.h:1866 [inline]
 new_sync_write+0x4c7/0x760 fs/read_write.c:474
 __vfs_write+0xe4/0x110 fs/read_write.c:487
 vfs_write+0x20c/0x580 fs/read_write.c:549
 ksys_write+0x14f/0x2d0 fs/read_write.c:599
 __do_sys_write fs/read_write.c:611 [inline]
 __se_sys_write fs/read_write.c:608 [inline]
 __x64_sys_write+0x73/0xb0 fs/read_write.c:608
 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x458c29
Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f293b44bc78 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000458c29
RDX: 0000000000000014 RSI: 00000000200002c0 RDI: 0000000000000003
RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f293b44c6d4
R13: 00000000004c8623 R14: 00000000004ded68 R15: 00000000ffffffff

The buggy address belongs to the page:
page:ffffea00025aafc0 count:0 mapcount:0 mapping:0000000000000000 index:0x0
flags: 0x1fffc0000000000()
raw: 01fffc0000000000 0000000000000000 ffffffff025a0101 0000000000000000
raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff888096abef80: 00 00 00 f2 f2 f2 f2 f2 00 00 00 00 00 00 00 f2
 ffff888096abf000: f2 f2 f2 f2 00 00 00 00 00 00 00 00 00 00 00 00
>ffff888096abf080: 00 00 f3 f3 f3 f3 00 00 00 00 00 00 00 00 00 00
                         ^
 ffff888096abf100: 00 00 00 00 f1 f1 f1 f1 00 00 f3 f3 00 00 00 00
 ffff888096abf180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

Fixes: ed0de45a ("ipv4: recompile ip options in ipv4_link_failure")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Stephen Suryaputra <ssuryaextr@gmail.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds a limit on the number of skbs that fuzzers can queue
into loopback_queue. 1000 packets for rose loopback seems more than enough.

Then, since we now have multiple cpus in most linux hosts,
we also need to limit the number of skbs rose_loopback_timer()
can dequeue at each round.

rose_loopback_queue() can be drop-monitor friendly, calling
consume_skb() or kfree_skb() appropriately.

Finally, use mod_timer() instead of del_timer() + add_timer()

syzbot report was :

rcu: INFO: rcu_preempt self-detected stall on CPU
rcu:    0-...!: (10499 ticks this GP) idle=536/1/0x4000000000000002 softirq=103291/103291 fqs=34
rcu:     (t=10500 jiffies g=140321 q=323)
rcu: rcu_preempt kthread starved for 10426 jiffies! g140321 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x402 ->cpu=1
rcu: RCU grace-period kthread stack dump:
rcu_preempt     I29168    10      2 0x80000000
Call Trace:
 context_switch kernel/sched/core.c:2877 [inline]
 __schedule+0x813/0x1cc0 kernel/sched/core.c:3518
 schedule+0x92/0x180 kernel/sched/core.c:3562
 schedule_timeout+0x4db/0xfd0 kernel/time/timer.c:1803
 rcu_gp_fqs_loop kernel/rcu/tree.c:1971 [inline]
 rcu_gp_kthread+0x962/0x17b0 kernel/rcu/tree.c:2128
 kthread+0x357/0x430 kernel/kthread.c:253
 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352
NMI backtrace for cpu 0
CPU: 0 PID: 7632 Comm: kworker/0:4 Not tainted 5.1.0-rc5+ #172
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: events iterate_cleanup_work
Call Trace:
 <IRQ>
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x172/0x1f0 lib/dump_stack.c:113
 nmi_cpu_backtrace.cold+0x63/0xa4 lib/nmi_backtrace.c:101
 nmi_trigger_cpumask_backtrace+0x1be/0x236 lib/nmi_backtrace.c:62
 arch_trigger_cpumask_backtrace+0x14/0x20 arch/x86/kernel/apic/hw_nmi.c:38
 trigger_single_cpu_backtrace include/linux/nmi.h:164 [inline]
 rcu_dump_cpu_stacks+0x183/0x1cf kernel/rcu/tree.c:1223
 print_cpu_stall kernel/rcu/tree.c:1360 [inline]
 check_cpu_stall kernel/rcu/tree.c:1434 [inline]
 rcu_pending kernel/rcu/tree.c:3103 [inline]
 rcu_sched_clock_irq.cold+0x500/0xa4a kernel/rcu/tree.c:2544
 update_process_times+0x32/0x80 kernel/time/timer.c:1635
 tick_sched_handle+0xa2/0x190 kernel/time/tick-sched.c:161
 tick_sched_timer+0x47/0x130 kernel/time/tick-sched.c:1271
 __run_hrtimer kernel/time/hrtimer.c:1389 [inline]
 __hrtimer_run_queues+0x33e/0xde0 kernel/time/hrtimer.c:1451
 hrtimer_interrupt+0x314/0x770 kernel/time/hrtimer.c:1509
 local_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1035 [inline]
 smp_apic_timer_interrupt+0x120/0x570 arch/x86/kernel/apic/apic.c:1060
 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:807
RIP: 0010:__sanitizer_cov_trace_pc+0x0/0x50 kernel/kcov.c:95
Code: 89 25 b4 6e ec 08 41 bc f4 ff ff ff e8 cd 5d ea ff 48 c7 05 9e 6e ec 08 00 00 00 00 e9 a4 e9 ff ff 90 90 90 90 90 90 90 90 90 <55> 48 89 e5 48 8b 75 08 65 48 8b 04 25 00 ee 01 00 65 8b 15 c8 60
RSP: 0018:ffff8880ae807ce0 EFLAGS: 00000286 ORIG_RAX: ffffffffffffff13
RAX: ffff88806fd40640 RBX: dffffc0000000000 RCX: ffffffff863fbc56
RDX: 0000000000000100 RSI: ffffffff863fbc1d RDI: ffff88808cf94228
RBP: ffff8880ae807d10 R08: ffff88806fd40640 R09: ffffed1015d00f8b
R10: ffffed1015d00f8a R11: 0000000000000003 R12: ffff88808cf941c0
R13: 00000000fffff034 R14: ffff8882166cd840 R15: 0000000000000000
 rose_loopback_timer+0x30d/0x3f0 net/rose/rose_loopback.c:91
 call_timer_fn+0x190/0x720 kernel/time/timer.c:1325
 expire_timers kernel/time/timer.c:1362 [inline]
 __run_timers kernel/time/timer.c:1681 [inline]
 __run_timers kernel/time/timer.c:1649 [inline]
 run_timer_softirq+0x652/0x1700 kernel/time/timer.c:1694
 __do_softirq+0x266/0x95a kernel/softirq.c:293
 do_softirq_own_stack+0x2a/0x40 arch/x86/entry/entry_64.S:1027

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

After commit 5271953c ("rxrpc: Use the UDP encap_rcv hook"),
rxrpc_input_packet() is directly called from lockless UDP receive
path, under rcu_read_lock() protection.

It must therefore use RCU rules :

- udp_sk->sk_user_data can be cleared at any point in this function.
  rcu_dereference_sk_user_data() is what we need here.

- Also, since sk_user_data might have been set in rxrpc_open_socket()
  we must observe a proper RCU grace period before kfree(local) in
  rxrpc_lookup_local()

v4: @local can be NULL in xrpc_lookup_local() as reported by kbuild test robot <lkp@intel.com>
        and Julia Lawall <julia.lawall@lip6.fr>, thanks !

v3,v2 : addressed David Howells feedback, thanks !

syzbot reported :

kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] PREEMPT SMP KASAN
CPU: 0 PID: 19236 Comm: syz-executor703 Not tainted 5.1.0-rc6 #79
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:__lock_acquire+0xbef/0x3fb0 kernel/locking/lockdep.c:3573
Code: 00 0f 85 a5 1f 00 00 48 81 c4 10 01 00 00 5b 41 5c 41 5d 41 5e 41 5f 5d c3 48 b8 00 00 00 00 00 fc ff df 4c 89 ea 48 c1 ea 03 <80> 3c 02 00 0f 85 4a 21 00 00 49 81 7d 00 20 54 9c 89 0f 84 cf f4
RSP: 0018:ffff88809d7aef58 EFLAGS: 00010002
RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000026 RSI: 0000000000000000 RDI: 0000000000000001
RBP: ffff88809d7af090 R08: 0000000000000001 R09: 0000000000000001
R10: ffffed1015d05bc7 R11: ffff888089428600 R12: 0000000000000000
R13: 0000000000000130 R14: 0000000000000001 R15: 0000000000000001
FS:  00007f059044d700(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000004b6040 CR3: 00000000955ca000 CR4: 00000000001406f0
Call Trace:
 lock_acquire+0x16f/0x3f0 kernel/locking/lockdep.c:4211
 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline]
 _raw_spin_lock_irqsave+0x95/0xcd kernel/locking/spinlock.c:152
 skb_queue_tail+0x26/0x150 net/core/skbuff.c:2972
 rxrpc_reject_packet net/rxrpc/input.c:1126 [inline]
 rxrpc_input_packet+0x4a0/0x5536 net/rxrpc/input.c:1414
 udp_queue_rcv_one_skb+0xaf2/0x1780 net/ipv4/udp.c:2011
 udp_queue_rcv_skb+0x128/0x730 net/ipv4/udp.c:2085
 udp_unicast_rcv_skb.isra.0+0xb9/0x360 net/ipv4/udp.c:2245
 __udp4_lib_rcv+0x701/0x2ca0 net/ipv4/udp.c:2301
 udp_rcv+0x22/0x30 net/ipv4/udp.c:2482
 ip_protocol_deliver_rcu+0x60/0x8f0 net/ipv4/ip_input.c:208
 ip_local_deliver_finish+0x23b/0x390 net/ipv4/ip_input.c:234
 NF_HOOK include/linux/netfilter.h:289 [inline]
 NF_HOOK include/linux/netfilter.h:283 [inline]
 ip_local_deliver+0x1e9/0x520 net/ipv4/ip_input.c:255
 dst_input include/net/dst.h:450 [inline]
 ip_rcv_finish+0x1e1/0x300 net/ipv4/ip_input.c:413
 NF_HOOK include/linux/netfilter.h:289 [inline]
 NF_HOOK include/linux/netfilter.h:283 [inline]
 ip_rcv+0xe8/0x3f0 net/ipv4/ip_input.c:523
 __netif_receive_skb_one_core+0x115/0x1a0 net/core/dev.c:4987
 __netif_receive_skb+0x2c/0x1c0 net/core/dev.c:5099
 netif_receive_skb_internal+0x117/0x660 net/core/dev.c:5202
 napi_frags_finish net/core/dev.c:5769 [inline]
 napi_gro_frags+0xade/0xd10 net/core/dev.c:5843
 tun_get_user+0x2f24/0x3fb0 drivers/net/tun.c:1981
 tun_chr_write_iter+0xbd/0x156 drivers/net/tun.c:2027
 call_write_iter include/linux/fs.h:1866 [inline]
 do_iter_readv_writev+0x5e1/0x8e0 fs/read_write.c:681
 do_iter_write fs/read_write.c:957 [inline]
 do_iter_write+0x184/0x610 fs/read_write.c:938
 vfs_writev+0x1b3/0x2f0 fs/read_write.c:1002
 do_writev+0x15e/0x370 fs/read_write.c:1037
 __do_sys_writev fs/read_write.c:1110 [inline]
 __se_sys_writev fs/read_write.c:1107 [inline]
 __x64_sys_writev+0x75/0xb0 fs/read_write.c:1107
 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Fixes: 5271953c ("rxrpc: Use the UDP encap_rcv hook")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a designated reviewer for the LED subsystem as there
are already two maintainers assigned.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>

Before the commit 490ea596 ("RDS: IB: move FMR code to its own file"),
when the dirty_count is greater than 9/10 of max_items of 8K pool,
1M pool is used, Vice versa. After the commit 490ea596 ("RDS: IB: move
FMR code to its own file"), the above is removed. When we make the
following tests.

Server:
  rds-stress -r 1.1.1.16 -D 1M

Client:
  rds-stress -r 1.1.1.14 -s 1.1.1.16 -D 1M

The following will appear.
"
connecting to 1.1.1.16:4000
negotiated options, tasks will start in 2 seconds
Starting up..header from 1.1.1.166:4001 to id 4001 bogus
..
tsks  tx/s  rx/s tx+rx K/s  mbi K/s  mbo K/s tx us/c  rtt us
cpu %
   1    0    0     0.00     0.00     0.00    0.00 0.00 -1.00
   1    0    0     0.00     0.00     0.00    0.00 0.00 -1.00
   1    0    0     0.00     0.00     0.00    0.00 0.00 -1.00
   1    0    0     0.00     0.00     0.00    0.00 0.00 -1.00
   1    0    0     0.00     0.00     0.00    0.00 0.00 -1.00
...
"
So this exchange between 8K and 1M pool is added back.

Fixes: commit 490ea596 ("RDS: IB: move FMR code to its own file")
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Vrf device is not able to change mac address now because lack of
ndo_set_mac_address. Complete this in case some apps need to do
this.
Reported-by: Hui Wang <wanghui104@huawei.com>
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Previously BMC's MAC address is calculated by simply adding 1 to the
last byte of network controller's MAC address, and it produces incorrect
result when network controller's MAC address ends with 0xFF.

The problem can be fixed by calling eth_addr_inc() function to increment
MAC address; besides, the MAC address is also validated before assigning
to BMC.

Fixes: cb10c7c0 ("net/ncsi: Add NCSI Broadcom OEM command")
Signed-off-by: Tao Ren <taoren@fb.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Samuel Mendoza-Jonas <sam@mendozajonas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull drm regression fixes from Dave Airlie:
 "We interrupt your regularly scheduled drm fixes for a regression
  special.

  The first is for a fix in i915 that had unexpected side effects
  fallout in the userspace X.org modesetting driver where X would no
  longer start. I got tired of the nitpicking and issued a large hammer
  on it. The X.org driver is buggy, but blackscreen regressions are
  worse.

  The second was an oversight that myself and Gerd should have noticed
  better, Gerd is trying to fix this properly, but the regression is too
  large to leave, even if the original behaviour is bad in some cases,
  it's clearly bad to break a bunch of working use cases.

  I'll likely have a regular fixes pull later, but I really wanted to
  highlight these"

* tag 'drm-fixes-2019-04-24' of git://anongit.freedesktop.org/drm/drm:
  Revert "drm/virtio: drop prime import/export callbacks"
  Revert "drm/i915/fbdev: Actually configure untiled displays"

The netdev variant is usable on any context since it disables interrupts.
The napi variant of the call should only be used within softirq context.
Replace napi_alloc_frag on driver init with the correct netdev_alloc_frag
call

Changes since v1:
- Adjusted commit message
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Jassi Brar <jaswinder.singh@linaro.org>
Fixes: 4acb20b4 ("net: socionext: different approach on DMA")
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

There are spelling mistakes in structure elements, fix these.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch does more harm than good, as it breaks both Xwayland and
gnome-shell with X11.

Xwayland requires DRI3 & DRI3 requires PRIME.

X11 crash for obscure double-free reason which are hard to debug
(starting X11 by hand doesn't trigger the crash).

I don't see an apparent problem implementing those stub prime
functions, they may return an error at run-time, and it seems to be
handled fine by GNOME at least.

This reverts commit b318e3ff.
[airlied:
This broke userspace for virtio-gpus, and regressed things from DRI3 to DRI2.

This brings back the original problem, but it's better than regressions.]

Fixes: b318e3ff ("drm/virtio: drop prime import/export callbacks")
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

This reverts commit d179b88d.

This commit is documented to break userspace X.org modesetting driver in certain configurations.

The X.org modesetting userspace driver is broken. No fixes are available yet. In order for this patch to be applied it either needs a config option or a workaround developed.

This has been reported a few times, saying it's a userspace problem is clearly against the regression rules.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109806Signed-off-by: Dave Airlie <airlied@redhat.com>
Cc: <stable@vger.kernel.org> # v3.19+

Pull nfsd bugfixes from Bruce Fields:
 "Fix miscellaneous nfsd bugs, in NFSv4.1 callbacks, NFSv4.1
  lock-notification callbacks, NFSv3 readdir encoding, and the
  cache/upcall code"

* tag 'nfsd-5.1-1' of git://linux-nfs.org/~bfields/linux:
  nfsd: wake blocked file lock waiters before sending callback
  nfsd: wake waiters blocked on file_lock before deleting it
  nfsd: Don't release the callback slot unless it was actually held
  nfsd/nfsd3_proc_readdir: fix buffer count and page pointers
  sunrpc: don't mark uninitialised items as VALID.

Pull syscall numbering updates from Arnd Bergmann:
 "arch: add pidfd and io_uring syscalls everywhere

  This comes a bit late, but should be in 5.1 anyway: we want the newly
  added system calls to be synchronized across all architectures in the
  release.

  I hope that in the future, any newly added system calls can be added
  to all architectures at the same time, and tested there while they are
  in linux-next, avoiding dependencies between the architecture
  maintainer trees and the tree that contains the new system call"

* tag 'syscalls-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  arch: add pidfd and io_uring syscalls everywhere

Add missing <of_device_id> table for SPI driver relying on SPI
device match since compatible is in a DT binding or in a DTS.

Before this patch:
modinfo drivers/nfc/st95hf/st95hf.ko | grep alias
alias:          spi:st95hf

After this patch:
modinfo drivers/nfc/st95hf/st95hf.ko | grep alias
alias:          spi:st95hf
alias:          of:N*T*Cst,st95hfC*
alias:          of:N*T*Cst,st95hf
Reported-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Daniel Gomez <dagmcr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>