- 18 Mar, 2020 10 commits
-
-
David S. Miller authored
Jakub Kicinski says: ==================== ethtool: consolidate irq coalescing - last part Convert remaining drivers following the groundwork laid in a recent patch set [1] and continued in [2], [3], [4], [5]. The aim of the effort is to consolidate irq coalescing parameter validation in the core. This set is the sixth and last installment. It converts the remaining 8 drivers in drivers/net/ethernet. The last patch makes declaring supported IRQ coalescing parameters a requirement. [1] https://lore.kernel.org/netdev/20200305051542.991898-1-kuba@kernel.org/ [2] https://lore.kernel.org/netdev/20200306010602.1620354-1-kuba@kernel.org/ [3] https://lore.kernel.org/netdev/20200310021512.1861626-1-kuba@kernel.org/ [4] https://lore.kernel.org/netdev/20200311223302.2171564-1-kuba@kernel.org/ [5] https://lore.kernel.org/netdev/20200313040803.2367590-1-kuba@kernel.org/ ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Now that all in-tree drivers have been updated we can make the supported_coalesce_params mandatory. To save debugging time in case some driver was missed (or is out of tree) add a warning when netdev is registered with set_coalesce but without supported_coalesce_params. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver already correctly rejected all unsupported parameters. No functional changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver already correctly rejected all unsupported parameters. No functional changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver already correctly rejected all unsupported parameters. While at it remove unnecessary zeroing on get. No functional changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. The check for use_adaptive_tx_coalesce will now be done by the core. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 17 Mar, 2020 9 commits
-
-
David S. Miller authored
Pengcheng Yang says: ==================== tcp: fix stretch ACK bugs in congestion control modules "stretch ACKs" (caused by LRO, GRO, delayed ACKs or middleboxes) can cause serious performance shortfalls in common congestion control algorithms. Neal Cardwell submitted a series of patches starting with commit e73ebb08 ("tcp: stretch ACK fixes prep") to handle stretch ACKs and fixed stretch ACK bugs in Reno and CUBIC congestion control algorithms. This patch series continues to fix bic, scalable, veno and yeah congestion control algorithms to handle stretch ACKs. Changes in v2: - Provide [PATCH 0/N] to describe the modifications of this patch series ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Pengcheng Yang authored
Change Yeah to properly handle stretch ACKs in additive increase mode by passing in the count of ACKed packets to tcp_cong_avoid_ai(). In addition, we re-implemented the scalable path using tcp_cong_avoid_ai() and removed the pkts_acked variable. Signed-off-by: Pengcheng Yang <yangpc@wangsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Pengcheng Yang authored
Change Veno to properly handle stretch ACKs in additive increase mode by passing in the count of ACKed packets to tcp_cong_avoid_ai(). Signed-off-by: Pengcheng Yang <yangpc@wangsu.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Pengcheng Yang authored
No code logic has been changed in this patch. Signed-off-by: Pengcheng Yang <yangpc@wangsu.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Pengcheng Yang authored
Change Scalable to properly handle stretch ACKs in additive increase mode by passing in the count of ACKed packets to tcp_cong_avoid_ai(). In addition, because we are now precisely accounting for stretch ACKs, including delayed ACKs, we can now change TCP_SCALABLE_AI_CNT to 100. Signed-off-by: Pengcheng Yang <yangpc@wangsu.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Pengcheng Yang authored
Changes BIC to properly handle stretch ACKs in additive increase mode by passing in the count of ACKed packets to tcp_cong_avoid_ai(). Signed-off-by: Pengcheng Yang <yangpc@wangsu.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jesper Dangaard Brouer authored
XDP-redirect is broken in this driver sfc. XDP_REDIRECT requires tailroom for skb_shared_info when creating an SKB based on the redirected xdp_frame (both in cpumap and veth). The fix requires some initial explaining. The driver uses RX page-split when possible. It reserves the top 64 bytes in the RX-page for storing dma_addr (struct efx_rx_page_state). It also have the XDP recommended headroom of XDP_PACKET_HEADROOM (256 bytes). As it doesn't reserve any tailroom, it can still fit two standard MTU (1500) frames into one page. The sizeof struct skb_shared_info in 320 bytes. Thus drivers like ixgbe and i40e, reduce their XDP headroom to 192 bytes, which allows them to fit two frames with max 1536 bytes into a 4K page (192+1536+320=2048). The fix is to reduce this drivers headroom to 128 bytes and add the 320 bytes tailroom. This account for reserved top 64 bytes in the page, and still fit two frame in a page for normal MTUs. We must never go below 128 bytes of headroom for XDP, as one cacheline is for xdp_frame area and next cacheline is reserved for metadata area. Fixes: eb9a36be ("sfc: perform XDP processing on received packets") Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Alex Elder authored
Rearrange the config files for remoteproc and IPA to fix their interdependencies. First, have CONFIG_QCOM_Q6V5_MSS select QCOM_Q6V5_IPA_NOTIFY so the notification code is built regardless of whether IPA needs it. Next, represent QCOM_IPA as being dependent on QCOM_Q6V5_MSS rather than setting its value to match QCOM_Q6V5_COMMON (which is selected by QCOM_Q6V5_MSS). Drop all dependencies from QCOM_Q6V5_IPA_NOTIFY. The notification code will be built whenever QCOM_Q6V5_MSS is set, and it has no other dependencies. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Madhuparna Bhowmik authored
This path fixes the suspicious RCU usage warning reported by kernel test robot. net/kcm/kcmproc.c:#RCU-list_traversed_in_non-reader_section There is no need to use list_for_each_entry_rcu() in kcm_stats_seq_show() as the list is always traversed under knet->mutex held. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 16 Mar, 2020 20 commits
-
-
Zheng Zengkai authored
Remove set but not used variables 'sw_comp_cons' and 'hw_comp_cons' to fix gcc '-Wunused-but-set-variable' warning: drivers/net/ethernet/qlogic/qede/qede_ethtool.c: In function qede_selftest_receive_traffic: drivers/net/ethernet/qlogic/qede/qede_ethtool.c:1569:20: warning: variable sw_comp_cons set but not used [-Wunused-but-set-variable] drivers/net/ethernet/qlogic/qede/qede_ethtool.c: In function qede_selftest_receive_traffic: drivers/net/ethernet/qlogic/qede/qede_ethtool.c:1569:6: warning: variable hw_comp_cons set but not used [-Wunused-but-set-variable] After removing 'hw_comp_cons',the memory barrier 'rmb()' and its comments become useless, so remove them as well. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zheng Zengkai <zhengzengkai@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
For a single pedit action, multiple offload entries may be used. Set the hw_stats_type to all of them. Fixes: 44f86580 ("sched: act: allow user to specify type of HW stats for a filter") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Dejin Zheng says: ==================== net: stmmac: Use readl_poll_timeout() to simplify the code This patch sets just for replace the open-coded loop to the readl_poll_timeout() helper macro for simplify the code in stmmac driver. v2 -> v3: - return whatever error code by readl_poll_timeout() returned. v1 -> v2: - no changed. I am a newbie and sent this patch a month ago (February 6th). So far, I have not received any comments or suggestion. I think it may be lost somewhere in the world, so resend it. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dejin Zheng authored
The dwmac4_dma_reset() function use an open coded of readl_poll_timeout(). Replace the open coded handling with the proper function. Signed-off-by: Dejin Zheng <zhengdejin5@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dejin Zheng authored
The init_systime() function use an open coded of readl_poll_timeout(). Replace the open coded handling with the proper function. Signed-off-by: Dejin Zheng <zhengdejin5@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
YueHaibing authored
drivers/crypto/chelsio/chcr_ktls.c: In function chcr_ktls_cpl_set_tcb_rpl: drivers/crypto/chelsio/chcr_ktls.c:662:11: warning: variable status set but not used [-Wunused-but-set-variable] commit 8a30923e ("cxgb4/chcr: Save tx keys and handle HW response") involved this unused variable, remove it. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Era Mayflower authored
Netlink support of extended packet number cipher suites, allows adding and updating XPN macsec interfaces. Added support in: * Creating interfaces with GCM-AES-XPN-128 and GCM-AES-XPN-256 suites. * Setting and getting 64bit packet numbers with of SAs. * Setting (only on SA creation) and getting ssci of SAs. * Setting salt when installing a SAK. Added 2 cipher suite identifiers according to 802.1AE-2018 table 14-1: * MACSEC_CIPHER_ID_GCM_AES_XPN_128 * MACSEC_CIPHER_ID_GCM_AES_XPN_256 In addition, added 2 new netlink attribute types: * MACSEC_SA_ATTR_SSCI * MACSEC_SA_ATTR_SALT Depends on: macsec: Support XPN frame handling - IEEE 802.1AEbw. Signed-off-by: Era Mayflower <mayflowerera@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Era Mayflower authored
Support extended packet number cipher suites (802.1AEbw) frames handling. This does not include the needed netlink patches. * Added xpn boolean field to `struct macsec_secy`. * Added ssci field to `struct_macsec_tx_sa` (802.1AE figure 10-5). * Added ssci field to `struct_macsec_rx_sa` (802.1AE figure 10-5). * Added salt field to `struct macsec_key` (802.1AE 10.7 NOTE 1). * Created pn_t type for easy access to lower and upper halves. * Created salt_t type for easy access to the "ssci" and "pn" parts. * Created `macsec_fill_iv_xpn` function to create IV in XPN mode. * Support in PN recovery and preliminary replay check in XPN mode. In addition, according to IEEE 802.1AEbw figure 10-5, the PN of incoming frame can be 0 when XPN cipher suite is used, so fixed the function `macsec_validate_skb` to fail on PN=0 only if XPN is off. Signed-off-by: Era Mayflower <mayflowerera@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Russell King says: ==================== net: dsa: improve serdes integration Depends on "net: mii clause 37 helpers". Andrew Lunn mentioned that the Serdes PCS found in Marvell DSA switches does not automatically update the switch MACs with the link parameters. Currently, the DSA code implements a work-around for this. This series improves the Serdes integration, making use of the recent phylink changes to support split MAC/PCS setups. One noticable improvement for userspace is that ethtool can now report the link partner's advertisement. This repost has no changes compared to the previous posting; however, the regression Andrew had found which exists even without this patch set has now been fixed by Andrew and merged into the net-next tree. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Russell King authored
Use the status of the PHY_DETECT bit to determine whether we need to force the MAC settings in mac_link_up() and mac_link_down(). Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Russell King authored
The port_link_state method is only used by mv88e6xxx_port_setup_mac(), which is now only called during port setup, rather than also being called via phylink's mac_config method. Remove this now unnecessary optimisation, which allows us to remove the port_link_state methods as well. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Russell King authored
Setting the speed independently of duplex makes little sense; the two parameters result from negotiation or fixed setup, and may have inter- dependencies. Moreover, they are always controlled via the same register - having them split means we have to read-modify-write this register twice. Combine the two operations into a single port_set_speed_duplex() operation. Not only is this more efficient, it reduces the size of the code as well. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Russell King authored
phylink_mac_change() is supposed to be called with a 'false' argument if the link has gone down since it was last reported up; this is to ensure that link events along with renegotiation events are always correctly reported to userspace. Read the BMSR once when we have an interrupt, and report the link latched status to phylink via phylink_mac_change(). phylink will deal automatically with re-reading the link state once it has processed the link-down event. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Russell King authored
Extend the mv88e6xxx phylink implementation down to Serdes PHYs, which handle the PCS layer of such links. - Implement phylink PCS link state reading, so that we can provide ethtool with the linkmodes and link speed in the expected manner. Note: this will only be called for in-band negotiation, which is only supported by the serdes interfaces. - Implement phylink PCS configuration, so that the in-band AN and advertisement can be configured. - Implement phylink PCS negotiation restart, so that the in-band AN can be restarted. - Implement phylink PCS link up, so that when operating out-of-band, the Serdes can be configured for the appropriate fixed speed mode. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Russell King authored
Only configure the interface settings in mac_config(), leaving the speed and duplex settings to mac_link_up to deal with. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Russell King authored
The SGMII/1000base-X serdes register set is a clause 22 register set offset at 0x2000 in the PHYXS device. Rather than inventing our own defintions, use those that already exist, and name the register MV88E6390_SGMII_BMCR. Also remove the unused MV88E6390_SGMII_STATUS definitions. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Russell King authored
Issue a warning to the kernel log if phylink_mac_link_state() returns an error. This should not occur, but let's make it visible. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Russell King says: ==================== net: mii clause 37 helpers This is a re-post of two patches that are common to two series that I've sent in recent weeks; I'm re-posting them separately in the hope that they can be merged. No changes from either of the previous postings. These patches: 1. convert the existing (unused) mii_lpa_to_ethtool_lpa_x() function to a linkmode variant. 2. add a helper for clause 37 advertisements, supporting both the 1000baseX and defacto 2500baseX variants. Note that ethtool does not support half duplex for either of these, and we make no effort to do so. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Russell King authored
Add a helper to convert a linkmode advertisement to a clause 37 advertisement value for 1000base-x and 2500base-x. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Russell King authored
Add a LPA to linkmode decoder for 1000BASE-X protocols; this decoder only provides the modify semantics similar to other such decoders. This replaces the unused mii_lpa_to_ethtool_lpa_x() helper. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 15 Mar, 2020 1 commit
-
-
Alexander Bersenev authored
The ndp32->wLength is two bytes long, so replace cpu_to_le32 with cpu_to_le16. Fixes: 0fa81b30 ("cdc_ncm: Implement the 32-bit version of NCM Transfer Block") Signed-off-by: Alexander Bersenev <bay@hackerdom.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
-