- 03 Jul, 2013 40 commits
-
-
Cody P Schafer authored
Simply moves calculation of the new 'high' value outside the for_each_possible_cpu() loop, as it does not depend on the cpu. Signed-off-by:
Cody P Schafer <cody@linux.vnet.ibm.com> Cc: Gilad Ben-Yossef <gilad@benyossef.com> Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Pekka Enberg <penberg@kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Cody P Schafer authored
zone_pcp_update()'s goal is to adjust the ->high and ->mark members of a percpu pageset based on a zone's ->managed_pages. We don't need to drain the entire percpu pageset just to modify these fields. This lets us avoid calling setup_pageset() (and the draining required to call it) and instead allows simply setting the fields' values (with some attention paid to memory barriers to prevent the relationship between ->batch and ->high from being thrown off). This does change the behavior of zone_pcp_update() as the percpu pagesets will not be drained when zone_pcp_update() is called (they will end up being shrunk, not completely drained, later when a 0-order page is freed in free_hot_cold_page()). Signed-off-by:
-
Cody P Schafer authored
pcp->batch could change at any point, avoid relying on it being a stable value. Signed-off-by:
-
Cody P Schafer authored
Introduce pageset_update() to perform a safe transision from one set of pcp->{batch,high} to a new set using memory barriers. This ensures that batch is always set to a safe value (1) prior to updating high, and ensure that high is fully updated before setting the real value of batch. It avoids ->batch ever rising above ->high. Suggested by Gilad Ben-Yossef in these threads: https://lkml.org/lkml/2013/4/9/23 https://lkml.org/lkml/2013/4/10/49 Also reproduces his proposed comment. Signed-off-by:Gilad Ben-Yossef <gilad@benyossef.com> Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Pekka Enberg <penberg@kernel.org> Signed-off-by:
-
Cody P Schafer authored
Because we are going to rely upon a careful transision between old and new ->high and ->batch values using memory barriers and will remove stop_machine(), we need to prevent multiple updaters from interweaving their memory writes. Add a simple mutex to protect both update loops. Signed-off-by:
-
Cody P Schafer authored
"Problems" with the current code: 1: there is a lack of synchronization in setting ->high and ->batch in percpu_pagelist_fraction_sysctl_handler() 2: stop_machine() in zone_pcp_update() is unnecissary. 3: zone_pcp_update() does not consider the case where percpu_pagelist_fraction is non-zero To fix: 1: add memory barriers, a safe ->batch value, an update side mutex when updating ->high and ->batch, and use ACCESS_ONCE() for ->batch users that expect a stable value. 2: avoid draining pages in zone_pcp_update(), rely upon the memory barriers added to fix #1 3: factor out quite a few functions, and then call the appropriate one. Note that it results in a change to the behavior of zone_pcp_update(), which is used by memory_hotplug. I'm rather certain that I've diserned (and preserved) the essential behavior (changing ->high and ->batch), and only eliminated unneeded actions (draining the per cpu pages), but this may not be the case. Further note that the draining of pages that previously took place in zone_pcp_update() occured after repeated draining when attempting to offline a page, and after the offline has "succeeded". It appears that the draining was added to zone_pcp_update() to avoid refactoring setup_pageset() into 2 funtions. This patch: Creates pageset_set_batch() for use in setup_pageset(). pageset_set_batch() imitates the functionality of setup_pagelist_highmark(), but uses the boot time (percpu_pagelist_fraction == 0) calculations for determining ->high based on ->batch. Signed-off-by:
-
Libin authored
(*->vm_end - *->vm_start) >> PAGE_SHIFT operation is implemented as a inline funcion vma_pages() in linux/mm.h, so using it. Signed-off-by:
Libin <huawei.libin@huawei.com> Signed-off-by:
-
Libin authored
(*->vm_end - *->vm_start) >> PAGE_SHIFT operation is implemented as a inline funcion vma_pages() in linux/mm.h, so using it. Signed-off-by:
-
Libin authored
(*->vm_end - *->vm_start) >> PAGE_SHIFT operation is implemented as a inline funcion vma_pages() in linux/mm.h, so using it. Signed-off-by:
-
Minchan Kim authored
Swap subsystem does lazy swap slot free with expecting the page would be swapped out again so we can avoid unnecessary write. But the problem in in-memory swap(ex, zram) is that it consumes memory space until vm_swap_full(ie, used half of all of swap device) condition meet. It could be bad if we use multiple swap device, small in-memory swap and big storage swap or in-memory swap alone. This patch makes swap subsystem free swap slot as soon as swap-read is completed and make the swapcache page dirty so the page should be written out the swap device to reclaim it. It means we never lose it. I tested this patch with kernel compile workload. 1. before compile time : 9882.42 zram max wasted space by fragmentation: 13471881 byte memory space consumed by zram: 174227456 byte the number of slot free notify: 206684 2. after compile time : 9653.90 zram max wasted space by fragmentation: 11805932 byte memory space consumed by zram: 154001408 byte the number of slot free notify: 426972 [akpm@linux-foundation.org: tweak comment text] [artem.savkov@gmail.com: fix BUG due to non-swapcache pages in end_swap_bio_read()] [akpm@linux-foundation.org: invert unlikely() test, augment comment, 80-col cleanup] Signed-off-by:
Dan Magenheimer <dan.magenheimer@oracle.com> Signed-off-by:
Minchan Kim <minchan@kernel.org> Signed-off-by:
Artem Savkov <artem.savkov@gmail.com> Cc: Hugh Dickins <hughd@google.com> Cc: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Konrad Rzeszutek Wilk <konrad@darnok.org> Cc: Shaohua Li <shli@kernel.org> Signed-off-by:
-
David Rientjes authored
For processes that have detached their mm's, task_in_mem_cgroup() unnecessarily takes task_lock() when rcu_read_lock() is all that is necessary to call mem_cgroup_from_task(). While we're here, switch task_in_mem_cgroup() to return bool. Signed-off-by:
David Rientjes <rientjes@google.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Acked-by:
Michal Hocko <mhocko@suse.cz> Signed-off-by:
-
Pavel Emelyanov authored
In order to reuse bits from pagemap entries gracefully, we leave the entries as is but on pagemap open emit a warning in dmesg, that bits 55-60 are about to change in a couple of releases. Next, if a user issues soft-dirty clear command via the clear_refs file (it was disabled before v3.9) we assume that he's aware of the new pagemap format, note that fact and report the bits in pagemap in the new manner. The "migration strategy" looks like this then: 1. existing users are not affected -- they don't touch soft-dirty feature, thus see old bits in pagemap, but are warned and have time to fix themselves 2. those who use soft-dirty know about new pagemap format 3. some time soon we get rid of any signs of page-shift in pagemap as well as this trick with clear-soft-dirty affecting pagemap format. Signed-off-by:
Pavel Emelyanov <xemul@parallels.com> Cc: Matt Mackall <mpm@selenic.com> Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Cc: Glauber Costa <glommer@parallels.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
Pavel Emelyanov authored
The soft-dirty is a bit on a PTE which helps to track which pages a task writes to. In order to do this tracking one should 1. Clear soft-dirty bits from PTEs ("echo 4 > /proc/PID/clear_refs) 2. Wait some time. 3. Read soft-dirty bits (55'th in /proc/PID/pagemap2 entries) To do this tracking, the writable bit is cleared from PTEs when the soft-dirty bit is. Thus, after this, when the task tries to modify a page at some virtual address the #PF occurs and the kernel sets the soft-dirty bit on the respective PTE. Note, that although all the task's address space is marked as r/o after the soft-dirty bits clear, the #PF-s that occur after that are processed fast. This is so, since the pages are still mapped to physical memory, and thus all the kernel does is finds this fact out and puts back writable, dirty and soft-dirty bits on the PTE. Another thing to note, is that when mremap moves PTEs they are marked with soft-dirty as well, since from the user perspective mremap modifies the virtual memory at mremap's new address. Signed-off-by: -
Pavel Emelyanov authored
These bits are always constant (== PAGE_SHIFT) and just occupy space in the entry. Moreover, in next patch we will need to report one more bit in the pagemap, but all bits are already busy on it. That said, describe the pagemap entry that has 6 more free zero bits. Signed-off-by:
-
Pavel Emelyanov authored
In the next patch the clear-refs-type will be required in clear_refs_pte_range funciton, so prepare the walk->private to carry this info. Signed-off-by:
-
Pavel Emelyanov authored
This is the implementation of the soft-dirty bit concept that should help keep track of changes in user memory, which in turn is very-very required by the checkpoint-restore project (http://criu.org). To create a dump of an application(s) we save all the information about it to files, and the biggest part of such dump is the contents of tasks' memory. However, there are usage scenarios where it's not required to get _all_ the task memory while creating a dump. For example, when doing periodical dumps, it's only required to take full memory dump only at the first step and then take incremental changes of memory. Another example is live migration. We copy all the memory to the destination node without stopping all tasks, then stop them, check for what pages has changed, dump it and the rest of the state, then copy it to the destination node. This decreases freeze time significantly. That said, some help from kernel to watch how processes modify the contents of their memory is required. The proposal is to track changes with the help of new soft-dirty bit this way: 1. First do "echo 4 > /proc/$pid/clear_refs". At that point kernel clears the soft dirty _and_ the writable bits from all ptes of process $pid. From now on every write to any page will result in #pf and the subsequent call to pte_mkdirty/pmd_mkdirty, which in turn will set the soft dirty flag. 2. Then read the /proc/$pid/pagemap2 and check the soft-dirty bit reported there (the 55'th one). If set, the respective pte was written to since last call to clear refs. The soft-dirty bit is the _PAGE_BIT_HIDDEN one. Although it's used by kmemcheck, the latter one marks kernel pages with it, while the former bit is put on user pages so they do not conflict to each other. This patch: A new clear-refs type will be added in the next patch, so prepare code for that. [akpm@linux-foundation.org: don't assume that sizeof(enum clear_refs_types) == sizeof(int)] Signed-off-by:
-
Kees Cook authored
The template lookup interface does not provide a way to use format strings, so make sure that the interface cannot be abused accidentally. Signed-off-by:
Kees Cook <keescook@chromium.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "David S. Miller" <davem@davemloft.net> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Kees Cook authored
Disk names may contain arbitrary strings, so they must not be interpreted as format strings. It seems that only md allows arbitrary strings to be used for disk names, but this could allow for a local memory corruption from uid 0 into ring 0. CVE-2013-2851 Signed-off-by:
-
Jonathan Salwan authored
In drivers/cdrom/cdrom.c mmc_ioctl_cdrom_read_data() allocates a memory area with kmalloc in line 2885. 2885 cgc->buffer = kmalloc(blocksize, GFP_KERNEL); 2886 if (cgc->buffer == NULL) 2887 return -ENOMEM; In line 2908 we can find the copy_to_user function: 2908 if (!ret && copy_to_user(arg, cgc->buffer, blocksize)) The cgc->buffer is never cleaned and initialized before this function. If ret = 0 with the previous basic block, it's possible to display some memory bytes in kernel space from userspace. When we read a block from the disk it normally fills the ->buffer but if the drive is malfunctioning there is a chance that it would only be partially filled. The result is an leak information to userspace. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Cong Wang authored
There is a hole in struct hd_geometry, so we have to zero the struct on stack before copying it to user-space. Signed-off-by:
Cong Wang <amwang@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Libo Chen authored
Without this patch, gdrom_major will leak when gd.cd_info alloc fails. Signed-off-by:
Libo Chen <libo.chen@huawei.com> Cc: Jens Axboe <axboe@kernel.dk> Acked-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Xue jiufei authored
There may exist NULL pointer dereference in config_item_name() when one volume (say Volume A) unmounts while another (say Volume B) mounting. Volume A Volume B already Mounted. Unmounting, call o2hb_heartbeat_group_drop_item() -> config_item_put(item) set reg(A)->item.ci_name to NULL in function config_item_cleanup(). begin mounting, call o2hb_region_pin() and tranverse all regions. When reading reg(A)->item.ci_name, it causes NULL pointer dereference. call o2hb_region_release() and del reg(A) from list. So we should skip accessing regions that is going to release when tranverse o2hb_all_regions. Signed-off-by:Yiwen Jiang <jiangyiwen@huawei.com> Signed-off-by:
joyce <xuejiufei@huawei.com> Acked-by:
Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Sunil Mushran <sunil.mushran@gmail.com> Cc: Jie Liu <jeff.liu@oracle.com> Signed-off-by:
-
Jie Liu authored
Adjust switch..case syntax at o2net_state_change to meet the kernel coding standard. s/printk/pr_info/. [akpm@linux-foundation.org: revert pr_foo() change] Signed-off-by:
Jie Liu <jeff.liu@oracle.com> Acked-by:
-
Jie Liu authored
Fix a comment typo in o2quo_hb_still_up() Signed-off-by:
-
Jie Liu authored
s/o2hb_global_hearbeat_mode_set/o2hb_global_heartbeat_mode_set/ to make the signature of those routines in a consistent manner with others for heartbeating. Signed-off-by:
Sunil Mushran <sunil.mushran@gmail.com> Cc: Gurudas Pai <gurudas.pai@oracle.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Noboru Iwamatsu <n_iwamatsu@jp.fujitsu.com> Cc: Srinivas Eeeda <srinivas.eeda@oracle.com> Cc: Tao Ma <tm@tao.ma> Signed-off-by:
-
Noboru Iwamatsu authored
Under heavy I/O load, writing the disk heartbeat can be forced to wait for minutes, and this causes the node to be fenced. This patch tries to use WRITE_SYNC in submitting the heartbeat bio, so that writing the heartbeat will have a priority over other requests. Signed-off-by:
Noboru Iwamatsu <n_iwamatsu@jp.fujitsu.com> Acked-by:
Tao Ma <tm@tao.ma> Acked-by:
Gurudas Pai <gurudas.pai@oracle.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Signed-off-by:
-
Junxiao Bi authored
Inlined xattr shared free space of inode block with inlined data or data extent record, so the size of the later two should be adjusted when inlined xattr is enabled. See ocfs2_xattr_ibody_init(). But this isn't done well when reflink. For inode with inlined data, its max inlined data size is adjusted in ocfs2_duplicate_inline_data(), no problem. But for inode with data extent record, its record count isn't adjusted. Fix it, or data extent record and inlined xattr may overwrite each other, then cause data corruption or xattr failure. One panic caused by this bug in our test environment is the following: kernel BUG at fs/ocfs2/xattr.c:1435! invalid opcode: 0000 [#1] SMP Pid: 10871, comm: multi_reflink_t Not tainted 2.6.39-300.17.1.el5uek #1 RIP: ocfs2_xa_offset_pointer+0x17/0x20 [ocfs2] RSP: e02b:ffff88007a587948 EFLAGS: 00010283 RAX: 0000000000000000 RBX: 0000000000000010 RCX: 00000000000051e4 RDX: ffff880057092060 RSI: 0000000000000f80 RDI: ffff88007a587a68 RBP: ffff88007a587948 R08: 00000000000062f4 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000010 R13: ffff88007a587a68 R14: 0000000000000001 R15: ffff88007a587c68 FS: 00007fccff7f06e0(0000) GS:ffff88007fc00000(0000) knlGS:0000000000000000 CS: e033 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00000000015cf000 CR3: 000000007aa76000 CR4: 0000000000000660 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process multi_reflink_t Call Trace: ocfs2_xa_reuse_entry+0x60/0x280 [ocfs2] ocfs2_xa_prepare_entry+0x17e/0x2a0 [ocfs2] ocfs2_xa_set+0xcc/0x250 [ocfs2] ocfs2_xattr_ibody_set+0x98/0x230 [ocfs2] __ocfs2_xattr_set_handle+0x4f/0x700 [ocfs2] ocfs2_xattr_set+0x6c6/0x890 [ocfs2] ocfs2_xattr_user_set+0x46/0x50 [ocfs2] generic_setxattr+0x70/0x90 __vfs_setxattr_noperm+0x80/0x1a0 vfs_setxattr+0xa9/0xb0 setxattr+0xc3/0x120 sys_fsetxattr+0xa8/0xd0 system_call_fastpath+0x16/0x1b Signed-off-by:Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by:
-
Younger Liu authored
While deleting a file with ocfs2_unlink(), there is a bug in this function. This bug will result in filesystem read-only. After calling ocfs2_orphan_add(), the file which will be deleted is added into orphan dir. If ocfs2_delete_entry() fails, the file still exists in the parent dir. And this scenario introduces a conflict of metadata. If a file is added into orphan dir, when we put inode of the file with iput(), the inode i_flags is setted (~OCFS2_VALID_FL) in ocfs2_remove_inode(), and then write back to disk. But as previously mentioned, the file still exists in the parent dir. On other nodes, the file can be still accessed. When first read the file with ocfs2_read_blocks() from disk, It will check and avalidate inode using ocfs2_validate_inode_block(). So File system will be readonly because the inode is invalid. In other words, the inode i_flags has been set (~OCFS2_VALID_FL). [akpm@linux-foundation.org: cleanups] [jeff.liu@oracle.com: s/inode_is_unlinkable/ocfs2_inode_is_unlinkable/] Signed-off-by:
Younger Liu <younger.liu@huawei.com> Signed-off-by:
Jensen <shencanquan@huawei.com> Cc: Jie Liu <jeff.liu@oracle.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Sunil Mushran <sunil.mushran@gmail.com> Signed-off-by:
-
Andrew Morton authored
Cc: Jie Liu <jeff.liu@oracle.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Sunil Mushran <sunil.mushran@gmail.com> Cc: Younger Liu <younger.liu@huawei.com> Signed-off-by:
-
Jie Liu authored
In ocfs2_relink_block_group(), we roll back all those changes if notify intent to modify buffers for metadata update failed even if the relevant buffer has not yet been modified/got dirty at that point, that are not quite right because of: - None buffer has been modified/dirty if failed to call ocfs2_journal_access_gd() against the previous block group buffer - Only the previous block group buffer has got dirty if failed to call ocfs2_journal_access_gd() against the block group buffer - There is no need to roll back the change for file entry buffer at all Those problems will not cause anything wrong but unnecessary. This patch fix them and kill the useless bg_ptr variable as well. Signed-off-by:
-
Younger Liu authored
While adding a file into orphan dir in ocfs2_orphan_add(), it calls __ocfs2_add_entry() before ocfs2_journal_access_di(). If ocfs2_journal_access_di() failed, the file is added into orphan dir, and orphan dir dinode updated, but file dinode has not been updated. Accordingly, the data is not consistent between file dinode and orphan dir. So, need to call ocfs2_journal_access_di() before __ocfs2_add_entry(), and if ocfs2_journal_access_di() failed, orphan_fe and orphan_dir_inode->i_nlink need rollback. This bug was added by 3939fda4 ("Ocfs2: Journaling i_flags and i_orphaned_slot when adding inode to orphan dir."). Signed-off-by:
-
Xue jiufei authored
dlmlock_master() returns DLM_RECOVERING/DLM_MIGRATING/ DLM_FORWAR after adding lock to blocked list if lockres has the state DLM_LOCK_RES_RECOVERING/DLM_LOCK_RES_MIGRATING/ DLM_LOCK_RES_IN_PROGRESS. so it will retry in dlmlock(). And this may cause dlm_thread fall into an infinite loop Thread1 dlm_thread calls dlm_lock->dlmlock_master, if lockresA is in state DLM_LOCK_RES_RECOVERING, calls __dlm_wait_on_lockres() and waits until others threads clear this state; If cannot grant this lock, adding lock to blocked list, and return DLM_RECOVERING; Grant this lock and move it to grant list; After a while, retry and calls list_add_tail(), adding lock to blocked list again. Granted and blocked list of this lockres will become the following conditions: lock_res->granted.next = dlm_lock->list_head; lock_res->blocked.next = dlm_lock->list_head; dlm_lock->list_head.next = dlm_lock_resource->blocked; When dlm_thread traverses the granted list, it will fall into an endless loop, checking dlm_lock.list_head, dlm_lock->list_head.next (i.e.lock_res->blocked), lock_res->blocked.next(i.e.dlm_lock.list_head again) ..... Signed-off-by: -
Junxiao Bi authored
Free space checking will be done in ocfs2_xattr_ibody_init(). So remove here. [akpm@linux-foundation.org: remove unused local] Signed-off-by:
-
Younger Liu authored
There is a memory leak in sc_kref_release(). When free struct o2net_sock_container (sc), we should release sc->sc_page. Signed-off-by:
-
Goldwyn Rodrigues authored
While adding extends to a file, the credits are calculated incorrectly and if the requested clusters is more than one (or more because we used a conservative limit) then we run out of journal credits and we hit an assert in journalling code. The function parameter bits_wanted variable was not used at all. Signed-off-by:
Goldwyn Rodrigues <rgoldwyn@suse.com> Reviewed-by:
-
Joseph Qi authored
In ocfs2_remove_btree_range, when calling ocfs2_lock_refcount_tree and ocfs2_prepare_refcount_change_for_del failed, it goes to out and then tries to call mutex_unlock without mutex_lock before. And when calling ocfs2_reserve_blocks_for_rec_trunc failed, it should free ref_tree before return. Signed-off-by:
Joseph Qi <joseph.qi@huawei.com> Reviewed-by:
-
Goldwyn Rodrigues authored
Code cleanup: needs_checkpoint is assigned to but never used. Delete the variable. Signed-off-by:
-
Xue jiufei authored
dlm_begin_reco_handler() returns without putting dlm when dlm recovery state is DLM_RECO_STATE_FINALIZE. Signed-off-by:
-
Joseph Qi authored
If we use le32_add_cpu to set ocfs2_dinode i_flags, it may lead to the corresponding flag corrupted. So we should change it to bitwise and/or operation. Signed-off-by:
-
Joseph Qi authored
In dlm_request_all_locks, ret is type enum. But o2net_send_message returns a type int value. Then it will never run into the following error branch. So we should change the ret type from enum to int. Signed-off-by:
-
