- 27 Feb, 2019 40 commits
-
-
Stanislav Fomichev authored
[ Upstream commit f67ad87a ] While running test_progs in a loop I found out that I'm sometimes hitting "Didn't find expected build ID from the map" error. Looking at stack_map_get_build_id_offset() it seems that it is racy (by design) and can sometimes return BPF_STACK_BUILD_ID_IP (i.e. can't trylock current->mm->mmap_sem). Let's retry this test a single time. Fixes: 13790d1c ("bpf: add selftest for stackmap with build_id in NMI context") Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Stanislav Fomichev authored
[ Upstream commit 4af396ae ] When returning BPF_STACK_BUILD_ID_IP from stack_map_get_build_id_offset, make sure that build_id field is empty. Since we are using percpu free list, there is a possibility that we might reuse some previous bpf_stack_build_id with non-zero build_id. Fixes: 615755a7 ("bpf: extend stackmap to save binary_build_id+offset instead of address") Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Stanislav Fomichev authored
[ Upstream commit 0b698005 ] Build-id length is not fixed to 20, it can be (`man ld` /--build-id): * 128-bit (uuid) * 160-bit (sha1) * any length specified in ld --build-id=0xhexstring To fix the issue of missing BPF_STACK_BUILD_ID_VALID for shorter build-ids, assume that build-id is somewhere in the range of 1 .. 20. Set the remaining bytes to zero. v2: * don't introduce new "len = min(BPF_BUILD_ID_SIZE, nhdr->n_descsz)", we already know that nhdr->n_descsz <= BPF_BUILD_ID_SIZE if we enter this 'if' condition Fixes: 615755a7 ("bpf: extend stackmap to save binary_build_id+offset instead of address") Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
David Howells authored
[ Upstream commit 59d49076 ] Fix the refcounting of the authentication keys in the file locking code. The vnode->lock_key member points to a key on which it expects to be holding a ref, but it isn't always given an extra ref, however. Fixes: 0fafdc9f ("afs: Fix file locking") Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Marc Dionne authored
[ Upstream commit 4882a27c ] A cb_interest record is not necessarily attached to the vnode on entry to afs_validate(), which can cause an oops when we try to bring the vnode's cb_s_break up to date in the default case (ie. no current callback promise and the vnode has not been deleted). Fix this by simply removing the line, as vnode->cb_s_break will be set when needed by afs_register_server_cb_interest() when we next get a callback promise from RPC call. The oops looks something like: BUG: unable to handle kernel NULL pointer dereference at 0000000000000018 ... RIP: 0010:afs_validate+0x66/0x250 [kafs] ... Call Trace: afs_d_revalidate+0x8d/0x340 [kafs] ? __d_lookup+0x61/0x150 lookup_dcache+0x44/0x70 ? lookup_dcache+0x44/0x70 __lookup_hash+0x24/0xa0 do_unlinkat+0x11d/0x2c0 __x64_sys_unlink+0x23/0x30 do_syscall_64+0x4d/0xf0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: ae3b7361 ("afs: Fix validation/callback interaction") Signed-off-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Davide Caratti authored
[ Upstream commit 91fa038d ] In iproute2 commit 90c5c969f0b9 ("fix print_0xhex on 32 bit"), the format specifier for the ife type changed from 0x%X to %#llX, causing systematic failures in the following TDC test cases: 7682 - Create valid ife encode action with mark and pass control ef47 - Create valid ife encode action with mark and pipe control df43 - Create valid ife encode action with mark and continue control e4cf - Create valid ife encode action with mark and drop control ccba - Create valid ife encode action with mark and reclassify control a1cf - Create valid ife encode action with mark and jump control cb3d - Create valid ife encode action with mark value at 32-bit maximum 95ed - Create valid ife encode action with prio and pass control aa17 - Create valid ife encode action with prio and pipe control 74c7 - Create valid ife encode action with prio and continue control 7a97 - Create valid ife encode action with prio and drop control f66b - Create valid ife encode action with prio and reclassify control 3056 - Create valid ife encode action with prio and jump control 7dd3 - Create valid ife encode action with prio value at 32-bit maximum 05bb - Create valid ife encode action with tcindex and pass control ce65 - Create valid ife encode action with tcindex and pipe control 09cd - Create valid ife encode action with tcindex and continue control 8eb5 - Create valid ife encode action with tcindex and continue control 451a - Create valid ife encode action with tcindex and drop control d76c - Create valid ife encode action with tcindex and reclassify control e731 - Create valid ife encode action with tcindex and jump control b7b8 - Create valid ife encode action with tcindex value at 16-bit maximum 2a9c - Create valid ife encode action with mac src parameter cf5c - Create valid ife encode action with mac dst parameter 2353 - Create valid ife encode action with mac src and mac dst parameters 552c - Create valid ife encode action with mark and type parameters 0421 - Create valid ife encode action with prio and type parameters 4017 - Create valid ife encode action with tcindex and type parameters fac3 - Create valid ife encode action with index at 32-bit maximnum 7c25 - Create valid ife decode action with pass control dccb - Create valid ife decode action with pipe control 7bb9 - Create valid ife decode action with continue control d9ad - Create valid ife decode action with drop control 219f - Create valid ife decode action with reclassify control 8f44 - Create valid ife decode action with jump control b330 - Create ife encode action with cookie Change 'matchPattern' values, allowing '0' and '0x0' if ife type is equal to 0, and accepting both '0x' and '0X' otherwise, to let these tests pass both with old and new tc binaries. While at it, fix a small typo in test case fac3 ('maximnum'->'maximum'). Signed-off-by: Davide Caratti <dcaratti@redhat.com> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Davide Caratti authored
[ Upstream commit 5216bd77 ] After commit 1c25324c ("net/sched: act_tunnel_key: Don't dump dst port if it wasn't set"), act_tunnel_key doesn't dump anymore the destination port, unless it was explicitly configured. This caused systematic failures in the following TDC test case: 7a88 - Add tunnel_key action with cookie parameter Avoid matching zero values of TCA_TUNNEL_KEY_ENC_DST_PORT to let the test pass again. Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Davide Caratti authored
[ Upstream commit e4136155 ] After merge of commit 80ef0f22 ("net/sched: act_tunnel_key: Allow key-less tunnels"), act_tunnel_key does not reject anymore requests to install 'set' rules where the key id is missing. Therefore, drop the following TDC testcase: ba4e - Add tunnel_key set action with missing mandatory id parameter because it's going to become a systematic fail as soon as userspace iproute2 will start supporting key-less tunnels. Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Wen Yang authored
[ Upstream commit b4711098 ] static checker warning: drivers/xen/pvcalls-front.c:373 alloc_active_ring() error: we previously assumed 'map->active.ring' could be null (see line 357) drivers/xen/pvcalls-front.c 351 static int alloc_active_ring(struct sock_mapping *map) 352 { 353 void *bytes; 354 355 map->active.ring = (struct pvcalls_data_intf *) 356 get_zeroed_page(GFP_KERNEL); 357 if (!map->active.ring) ^^^^^^^^^^^^^^^^^ Check 358 goto out; 359 360 map->active.ring->ring_order = PVCALLS_RING_ORDER; 361 bytes = (void *)__get_free_pages(GFP_KERNEL | __GFP_ZERO, 362 PVCALLS_RING_ORDER); 363 if (!bytes) 364 goto out; 365 366 map->active.data.in = bytes; 367 map->active.data.out = bytes + 368 XEN_FLEX_RING_SIZE(PVCALLS_RING_ORDER); 369 370 return 0; 371 372 out: --> 373 free_active_ring(map); ^^^ Add null check on map->active.ring before dereferencing it to avoid any NULL pointer dereferences. Fixes: 9f51c05d ("pvcalls-front: Avoid get_free_pages(GFP_KERNEL) under spinlock") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Suggested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Wen Yang <wen.yang99@zte.com.cn> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> CC: Boris Ostrovsky <boris.ostrovsky@oracle.com> CC: Juergen Gross <jgross@suse.com> CC: Stefano Stabellini <sstabellini@kernel.org> CC: Dan Carpenter <dan.carpenter@oracle.com> CC: xen-devel@lists.xenproject.org CC: linux-kernel@vger.kernel.org Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Julia Lawall authored
[ Upstream commit 4bb0e6d7 ] The device node iterators perform an of_node_get on each iteration, so a jump out of the loop requires an of_node_put. Remote and port also have augmented reference counts, so drop them on each iteration and at the end of the function, respectively. Remote is only used for the address it contains, not for the contents of that address, so the reference count can be dropped immediately. The semantic patch that fixes the first part of this problem is as follows (http://coccinelle.lip6.fr): // <smpl> @@ expression root,e; local idexpression child; iterator name for_each_child_of_node; @@ for_each_available_child_of_node(root, child) { ... when != of_node_put(child) when != e = child + of_node_put(child); ? break; ... } ... when != child // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/1547369264-24831-5-git-send-email-Julia.Lawall@lip6.frSigned-off-by: Sasha Levin <sashal@kernel.org>
-
Pavel Tikhomirov authored
[ Upstream commit 74ad7419 ] We've failed to copy and process vhost_iotlb_msg so let userspace at least know about it. For instance before these patch the code below runs without any error: int main() { struct vhost_msg msg; struct iovec iov; int fd; fd = open("/dev/vhost-net", O_RDWR); if (fd == -1) { perror("open"); return 1; } iov.iov_base = &msg; iov.iov_len = sizeof(msg)-4; if (writev(fd, &iov,1) == -1) { perror("writev"); return 1; } return 0; } Signed-off-by: Pavel Tikhomirov <ptikhomirov@virtuozzo.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Charlene Liu authored
[ Upstream commit 20300db4 ] [Why] PPLIB not receive the PME when unplug. Signed-off-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Chris Park <Chris.Park@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Felix Kuehling authored
[ Upstream commit bbdf514f ] dGPUs need their own topology devices. Don't assign them to APU topology devices with CPU cores. Bug: https://github.com/RadeonOpenCompute/ROCK-Kernel-Driver/issues/66Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Tested-by: Elias Konstantinidis <ekondis@gmail.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Julia Lawall authored
[ Upstream commit f672b93e ] Add an of_node_put when the result of of_graph_get_remote_port_parent is not available. An of_node_put is also needed when meson_probe_remote completes. This was present at the recursive call, but not in the call from meson_drv_probe. The semantic match that finds this problem is as follows (http://coccinelle.lip6.fr): // <smpl> @r exists@ local idexpression e; expression x; @@ e = of_graph_get_remote_port_parent(...); ... when != x = e when != true e == NULL when != of_node_put(e) when != of_fwnode_handle(e) ( return e; | *return ...; ) // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/1547372691-28324-4-git-send-email-Julia.Lawall@lip6.frSigned-off-by: Sasha Levin <sashal@kernel.org>
-
Talons Lee authored
[ Upstream commit 5268c8f3 ] Commit e657fccb clears cpu capability bit instead of using fake cpuid value, the EXTD should always be off for PV guest without depending on cpuid value. So remove the cpuid check in xen_read_msr_safe() to always clear the X2APIC_ENABLE bit. Signed-off-by: Talons Lee <xin.li@citrix.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Henry Yen authored
[ Upstream commit 2314e879 ] This patch uses nfct_help() to detect whether an established connection needs conntrack helper instead of using test_bit(IPS_HELPER_BIT, &ct->status). The reason is that IPS_HELPER_BIT is only set when using explicit CT target. However, in the case that a device enables conntrack helper via command "echo 1 > /proc/sys/net/netfilter/nf_conntrack_helper", the status of IPS_HELPER_BIT will not present any change, and consequently it loses the checking ability in the context. Signed-off-by: Henry Yen <henry.yen@mediatek.com> Reviewed-by: Ryder Lee <ryder.lee@mediatek.com> Tested-by: John Crispin <john@phrozen.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Varun Prakash authored
[ Upstream commit 9e8f1c79 ] In case of ->set_param() and ->bind_conn() cxgb4i driver does not wait for cmd completion, this can create race conditions, to avoid this add wait_for_completion(). Signed-off-by: Varun Prakash <varun@chelsio.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Avri Altman authored
[ Upstream commit 9be9db9f ] Albeit we no longer rely on those hard-coded descriptor sizes, we still use them as our defaults, so better get it right. While adding its sysfs entries, we forgot to update the geometry descriptor size. It is 0x48 according to UFS2.1, and wasn't changed in UFS3.0. [mkp: typo] Fixes: c720c091 (scsi: ufs: sysfs: geometry descriptor) Signed-off-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Manish Rangankar authored
[ Upstream commit 34a2ce88 ] When the driver finds invalid destination MAC for the first un-reachable target, and before completes the PATH_REQ operation, set new ep_state to OFFLDCONN_NONE so that as part of driver ep_poll mechanism, the upper open-iscsi layer is notified to complete the login process on the first un-reachable target and thus proceed login to other reachable targets. Signed-off-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Stanley Chu authored
[ Upstream commit ce9e7bce ] hba->is_sys_suspended is set after successful system suspend but not clear after successful system resume. According to current behavior, hba->is_sys_suspended will not be set if host is runtime-suspended but not system-suspended. Thus we shall aligh the same policy: clear this flag even if host remains runtime-suspended after ufshcd_system_resume is successfully returned. Simply fix this flag to correct host status logs. Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Reviewed-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Xiubo Li authored
[ Upstream commit a94a2572 ] Currently there is one cmd timeout timer and one qfull timer for each udev, and whenever any new command is coming in we will update the cmd timer or qfull timer. For some corner cases the timers are always working only for the ringbuffer's and full queue's newest cmd. That's to say the timer won't be fired even if one cmd has been stuck for a very long time and the deadline is reached. This fix will keep the cmd/qfull timers to be pended for the oldest cmd in ringbuffer and full queue, and will update them with the next cmd's deadline only when the old cmd's deadline is reached or removed from the ringbuffer and full queue. Signed-off-by: Xiubo Li <xiubli@redhat.com> Acked-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Jia-Ju Bai authored
[ Upstream commit 2ff33d66 ] The functions isdn_tty_tiocmset() and isdn_tty_set_termios() may be concurrently executed. isdn_tty_tiocmset isdn_tty_modem_hup line 719: kfree(info->dtmf_state); line 721: kfree(info->silence_state); line 723: kfree(info->adpcms); line 725: kfree(info->adpcmr); isdn_tty_set_termios isdn_tty_modem_hup line 719: kfree(info->dtmf_state); line 721: kfree(info->silence_state); line 723: kfree(info->adpcms); line 725: kfree(info->adpcmr); Thus, some concurrency double-free bugs may occur. These possible bugs are found by a static tool written by myself and my manual code review. To fix these possible bugs, the mutex lock "modem_info_mutex" used in isdn_tty_tiocmset() is added in isdn_tty_set_termios(). Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Jose Abreu authored
[ Upstream commit fa0be0a4 ] Currently, TX is given a budget which is consumed by stmmac_tx_clean() and stmmac_rx() is given the remaining non-consumed budget. This is wrong and in case we are sending a large number of packets this can starve RX because remaining budget will be low. Let's give always the same budget for RX and TX clean. While at it, check if we missed any interrupts while we were in NAPI callback by looking at DMA interrupt status. Cc: Joao Pinto <jpinto@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Jose Abreu authored
[ Upstream commit 3b509466 ] RX Watchdog can be disabled by platform definitions but currently we are initializing the descriptors before checking if Watchdog must be disabled or not. Fix this by checking earlier if user wants Watchdog disabled or not. Cc: Joao Pinto <jpinto@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Jose Abreu authored
[ Upstream commit 0650d401 ] Check if CBS is currently supported before trying to configure it in HW. Cc: Joao Pinto <jpinto@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Jose Abreu authored
[ Upstream commit fcc509eb ] In DMA interrupt handler we were clearing all interrupts status, even the ones that were not active. Fix this and only clear the active interrupts. Cc: Joao Pinto <jpinto@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Jose Abreu authored
[ Upstream commit 6dea7e18 ] Since commit b7d0f08e, the enable / disable of PCI device is not managed which will result in IO regions not being automatically unmapped. As regions continue mapped it is currently not possible to remove and then probe again the PCI module of stmmac. Fix this by manually unmapping regions on remove callback. Changes from v1: - Fix build error Cc: Joao Pinto <jpinto@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Fixes: b7d0f08e ("net: stmmac: Fix WoL for PCI-based setups") Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Tony Luck authored
[ Upstream commit 0919871a ] Possible race accessing memdev structures after dropping the mutex. Dan Williams says this could race against another thread that is doing: # echo "ACPI0012:00" > /sys/bus/acpi/drivers/nfit/unbind Reported-by: Jane Chu <jane.chu@oracle.com> Fixes: 23222f8f ("acpi, nfit: Add function to look up nvdimm...") Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Christophe Leroy authored
[ Upstream commit fb0bdec5 ] Commit 8c8c10b9 ("powerpc/8xx: fix handling of early NULL pointer dereference") moved the loading of r6 earlier in the code. As some functions are called inbetween, r6 needs to be loaded again with the address of swapper_pg_dir in order to set PTE pointers for the Abatron BDI. Fixes: 8c8c10b9 ("powerpc/8xx: fix handling of early NULL pointer dereference") Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Leon Romanovsky authored
[ Upstream commit 9d9f59b4 ] As part of audit process to update drivers to use rdma_restrack_add() ensure that QP objects is cleared before access. Such change fixes the crash observed with uninitialized non zero sgid attr accessed by ib_destroy_qp(). CPU: 3 PID: 74 Comm: kworker/u16:1 Not tainted 4.19.10-300.fc29.x86_64 Workqueue: ipoib_wq ipoib_cm_tx_reap [ib_ipoib] RIP: 0010:rdma_put_gid_attr+0x9/0x30 [ib_core] RSP: 0018:ffffb7ad819dbde8 EFLAGS: 00010202 RAX: 0000000000000000 RBX: ffff8d1bdf5a2e00 RCX: 0000000000002699 RDX: 206c656e72656af8 RSI: ffff8d1bf7ae6160 RDI: 206c656e72656b20 RBP: 0000000000000000 R08: 0000000000026160 R09: ffffffffc06b45bf R10: ffffe849887da000 R11: 0000000000000002 R12: ffff8d1be30cb400 R13: ffff8d1bdf681800 R14: ffff8d1be2272400 R15: ffff8d1be30ca000 FS: 0000000000000000(0000) GS:ffff8d1bf7ac0000(0000) knlGS:0000000000000000 Trace: ib_destroy_qp+0xc9/0x240 [ib_core] ipoib_cm_tx_reap+0x1f9/0x4e0 [ib_ipoib] process_one_work+0x1a1/0x3a0 worker_thread+0x30/0x380 ? pwq_unbound_release_workfn+0xd0/0xd0 kthread+0x112/0x130 ? kthread_create_worker_on_cpu+0x70/0x70 ret_from_fork+0x22/0x40 Reported-by: Alexander Murashkin <AlexanderMurashkin@msn.com> Tested-by: Alexander Murashkin <AlexanderMurashkin@msn.com> Fixes: 1a1f460f ("RDMA: Hold the sgid_attr inside the struct ib_ah/qp") Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
wenxu authored
[ Upstream commit 10f4e765 ] In the forward chain, the iif is changed from slave device to master vrf device. Thus, flow offload does not find a match on the lower slave device. This patch uses the cached route, ie. dst->dev, to update the iif and oif fields in the flow entry. After this patch, the following example works fine: # ip addr add dev eth0 1.1.1.1/24 # ip addr add dev eth1 10.0.0.1/24 # ip link add user1 type vrf table 1 # ip l set user1 up # ip l set dev eth0 master user1 # ip l set dev eth1 master user1 # nft add table firewall # nft add flowtable f fb1 { hook ingress priority 0 \; devices = { eth0, eth1 } \; } # nft add chain f ftb-all {type filter hook forward priority 0 \; policy accept \; } # nft add rule f ftb-all ct zone 1 ip protocol tcp flow offload @fb1 # nft add rule f ftb-all ct zone 1 ip protocol udp flow offload @fb1 Signed-off-by: wenxu <wenxu@ucloud.cn> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Song Liu authored
[ Upstream commit beaf3d19 ] As Naresh reported, test_stacktrace_build_id() causes panic on i386 and arm32 systems. This is caused by page_address() returns NULL in certain cases. This patch fixes this error by using kmap_atomic/kunmap_atomic instead of page_address. Fixes: 615755a7 (" bpf: extend stackmap to save binary_build_id+offset instead of address") Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Wen Yang authored
[ Upstream commit 9f51c05d ] The problem is that we call this with a spin lock held. The call tree is: pvcalls_front_accept() holds bedata->socket_lock. -> create_active() -> __get_free_pages() uses GFP_KERNEL The create_active() function is only called from pvcalls_front_accept() with a spin_lock held, The allocation is not allowed to sleep and GFP_KERNEL is not sufficient. This issue was detected by using the Coccinelle software. v2: Add a function doing the allocations which is called outside the lock and passing the allocated data to create_active(). v3: Use the matching deallocators i.e., free_page() and free_pages(), respectively. v4: It would be better to pre-populate map (struct sock_mapping), rather than introducing one more new struct. v5: Since allocating the data outside of this call it should also be freed outside, when create_active() fails. Move kzalloc(sizeof(*map2), GFP_ATOMIC) outside spinlock and use GFP_KERNEL instead. v6: Drop the superfluous calls. Suggested-by: Juergen Gross <jgross@suse.com> Suggested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Suggested-by: Stefano Stabellini <sstabellini@kernel.org> Signed-off-by: Wen Yang <wen.yang99@zte.com.cn> Acked-by: Stefano Stabellini <sstabellini@kernel.org> CC: Julia Lawall <julia.lawall@lip6.fr> CC: Boris Ostrovsky <boris.ostrovsky@oracle.com> CC: Juergen Gross <jgross@suse.com> CC: Stefano Stabellini <sstabellini@kernel.org> CC: xen-devel@lists.xenproject.org CC: linux-kernel@vger.kernel.org Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Yuchung Cheng authored
[ Upstream commit 31aa6503 ] The existing BPF TCP initial congestion window (TCP_BPF_IW) does not to work on (active) Fast Open sender. This is because it changes the (initial) window only if data_segs_out is zero -- but data_segs_out is also incremented on SYN-data. This patch fixes the issue by proerly accounting for SYN-data additionally. Fixes: fc747810 ("bpf: Adds support for setting initial cwnd") Signed-off-by: Yuchung Cheng <ycheng@google.com> Reviewed-by: Neal Cardwell <ncardwell@google.com> Acked-by: Lawrence Brakmo <brakmo@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
wenxu authored
[ Upstream commit a799aea0 ] Using the following example: client 1.1.1.7 ---> 2.2.2.7 which dnat to 10.0.0.7 server The first reply packet (ie. syn+ack) uses an incorrect destination address for the reverse route lookup since it uses: daddr = ct->tuplehash[!dir].tuple.dst.u3.ip; which is 2.2.2.7 in the scenario that is described above, while this should be: daddr = ct->tuplehash[dir].tuple.src.u3.ip; that is 10.0.0.7. Signed-off-by: wenxu <wenxu@ucloud.cn> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Thomas Bogendoerfer authored
[ Upstream commit 41af167f ] 64bit JAZZ builds failed with linux-next/arch/mips/jazz/jazzdma.c: In function `vdma_init`: /linux-next/arch/mips/jazz/jazzdma.c:77:30: error: implicit declaration of function `KSEG1ADDR`; did you mean `CKSEG1ADDR`? [-Werror=implicit-function-declaration] pgtbl = (VDMA_PGTBL_ENTRY *)KSEG1ADDR(pgtbl); ^~~~~~~~~ CKSEG1ADDR /linux-next/arch/mips/jazz/jazzdma.c:77:10: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast] pgtbl = (VDMA_PGTBL_ENTRY *)KSEG1ADDR(pgtbl); ^ In file included from /linux-next/arch/mips/include/asm/barrier.h:11:0, from /linux-next/include/linux/compiler.h:248, from /linux-next/include/linux/kernel.h:10, from /linux-next/arch/mips/jazz/jazzdma.c:11: /linux-next/arch/mips/include/asm/addrspace.h:41:29: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast] #define _ACAST32_ (_ATYPE_)(_ATYPE32_) /* widen if necessary */ ^ /linux-next/arch/mips/include/asm/addrspace.h:53:25: note: in expansion of macro `_ACAST32_` #define CPHYSADDR(a) ((_ACAST32_(a)) & 0x1fffffff) ^~~~~~~~~ /linux-next/arch/mips/jazz/jazzdma.c:84:44: note: in expansion of macro `CPHYSADDR` r4030_write_reg32(JAZZ_R4030_TRSTBL_BASE, CPHYSADDR(pgtbl)); Using correct casts and CKSEG1ADDR when dealing with the pgtbl setup fixes this. Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de> Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Michael S. Tsirkin authored
[ Upstream commit 3e2ffd65 ] Since commit 815f0ddb ("include/linux/compiler*.h: make compiler-*.h mutually exclusive") clang no longer reuses the OPTIMIZER_HIDE_VAR macro from compiler-gcc - instead it gets the version in include/linux/compiler.h. Unfortunately that version doesn't actually prevent compiler from optimizing out the variable. Fix up by moving the macro out from compiler-gcc.h to compiler.h. Compilers without incline asm support will keep working since it's protected by an ifdef. Also fix up comments to match reality since we are no longer overriding any macros. Build-tested with gcc and clang. Fixes: 815f0ddb ("include/linux/compiler*.h: make compiler-*.h mutually exclusive") Cc: Eli Friedman <efriedma@codeaurora.org> Cc: Joe Perches <joe@perches.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Logan Gunthorpe authored
[ Upstream commit cc29a1b0 ] scsi_mq_setup_tags(), which is called by scsi_add_host(), calculates the command size to allocate based on the prot_capabilities. In the isci driver, scsi_host_set_prot() is called after scsi_add_host() so the command size gets calculated to be smaller than it needs to be. Eventually, scsi_mq_init_request() locates the 'prot_sdb' after the command assuming it was sized correctly and a buffer overrun may occur. However, seeing blk_mq_alloc_rqs() rounds up to the nearest cache line size, the mistake can go unnoticed. The bug was noticed after the struct request size was reduced by commit 9d037ad7 ("block: remove req->timeout_list") Which likely reduced the allocated space for the request by an entire cache line, enough that the overflow could be hit and it caused a panic, on boot, at: RIP: 0010:t10_pi_complete+0x77/0x1c0 Call Trace: <IRQ> sd_done+0xf5/0x340 scsi_finish_command+0xc3/0x120 blk_done_softirq+0x83/0xb0 __do_softirq+0xa1/0x2e6 irq_exit+0xbc/0xd0 call_function_single_interrupt+0xf/0x20 </IRQ> sd_done() would call scsi_prot_sg_count() which reads the number of entities in 'prot_sdb', but seeing 'prot_sdb' is located after the end of the allocated space it reads a garbage number and erroneously calls t10_pi_complete(). To prevent this, the calls to scsi_host_set_prot() are moved into isci_host_alloc() before the call to scsi_add_host(). Out of caution, also move the similar call to scsi_host_set_guard(). Fixes: 3d2d7525 ("[SCSI] isci: T10 DIF support") Link: http://lkml.kernel.org/r/da851333-eadd-163a-8c78-e1f4ec5ec857@deltatee.comSigned-off-by: Logan Gunthorpe <logang@deltatee.com> Cc: Intel SCU Linux support <intel-linux-scu@intel.com> Cc: Artur Paszkiewicz <artur.paszkiewicz@intel.com> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jeff Moyer <jmoyer@redhat.com> Reviewed-by: Jeff Moyer <jmoyer@redhat.com> Reviewed-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
YueHaibing authored
[ Upstream commit 72b4a046 ] The return code should be check while qla4xxx_copy_from_fwddb_param fails. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Taehee Yoo authored
[ Upstream commit b91d9036 ] There is no code that decreases the reference count of stateful objects in error path of the nft_add_set_elem(). this causes a leak of reference count of stateful objects. Test commands: $nft add table ip filter $nft add counter ip filter c1 $nft add map ip filter m1 { type ipv4_addr : counter \;} $nft add element ip filter m1 { 1 : c1 } $nft add element ip filter m1 { 1 : c1 } $nft delete element ip filter m1 { 1 } $nft delete counter ip filter c1 Result: Error: Could not process rule: Device or resource busy delete counter ip filter c1 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^ At the second 'nft add element ip filter m1 { 1 : c1 }', the reference count of the 'c1' is increased then it tries to insert into the 'm1'. but the 'm1' already has same element so it returns -EEXIST. But it doesn't decrease the reference count of the 'c1' in the error path. Due to a leak of the reference count of the 'c1', the 'c1' can't be removed by 'nft delete counter ip filter c1'. Fixes: 8aeff920 ("netfilter: nf_tables: add stateful object reference to set elements") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-