- 19 Sep, 2016 11 commits
-
-
Colin Ian King authored
A couple of dev_err messages span two lines and the literal string is missing a white space between words. Add the white space and join the two lines into one. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Acked-by:
FLorian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
When fq is used on 32bit kernels, we need to lock the qdisc before copying 64bit fields. Otherwise "tc -s qdisc ..." might report bogus values. Fixes: afe4fd06 ("pkt_sched: fq: Fair Queue packet scheduler") Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Thadeu Lima de Souza Cascardo authored
Instead of using flow stats per NUMA node, use it per CPU. When using megaflows, the stats lock can be a bottleneck in scalability. On a E5-2690 12-core system, usual throughput went from ~4Mpps to ~15Mpps when forwarding between two 40GbE ports with a single flow configured on the datapath. This has been tested on a system with possible CPUs 0-7,16-23. After module removal, there were no corruption on the slab cache. Signed-off-by:
Thadeu Lima de Souza Cascardo <cascardo@redhat.com> Cc: pravin shelar <pshelar@ovn.org> Acked-by:
Pravin B Shelar <pshelar@ovn.org> Signed-off-by:
-
Thadeu Lima de Souza Cascardo authored
On a system with only node 1 as possible, all statistics is going to be accounted on node 0 as it will have a single writer. However, when getting and clearing the statistics, node 0 is not going to be considered, as it's not a possible node. Tested that statistics are not zero on a system with only node 1 possible. Also compile-tested with CONFIG_NUMA off. Signed-off-by:
-
David S. Miller authored
Xin Long says: ==================== sctp: fix the transmit err process This patchset is to improve the transmit err process and also fix some issues. After this patchset, once the chunks are enqueued successfully, even if the chunks fail to send out, no matter because of nodst or nomem, no err retruns back to users any more. Instead, they are taken care of by retransmit. v1->v2: - add more details to the changelog in patch 1/6 - add Fixes: tag in patch 2/6, 3/6 - also revert 69b5777f in patch 3/6 ==================== Signed-off-by:
-
Xin Long authored
As David and Marcelo's suggestion, ENOMEM err shouldn't return back to user in transmit path. Instead, sctp's retransmit would take care of the chunks that fail to send because of ENOMEM. This patch is only to do some release job when alloc_skb fails, not to return ENOMEM back any more. Besides, it also cleans up sctp_packet_transmit's err path, and fixes some issues in err path: - It didn't free the head skb in nomem: path. - No need to check nskb in no_route: path. - It should goto err: path if alloc_skb fails for head. - Not all the NOMEMs should free nskb. Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
Xin Long authored
sctp_outq_flush return value is meaningless now, this patch is to make sctp_outq_flush return void, as well as sctp_outq_fail and sctp_outq_uncork. Signed-off-by:
-
Xin Long authored
Every time when sctp calls sctp_outq_flush, it sends out the chunks of control queue, retransmit queue and data queue. Even if some trunks are failed to transmit, it still has to flush all the transports, as it's the only chance to clean that transmit_list. So the latest transmit error here should be returned back. This transmit error is an internal error of sctp stack. I checked all the places where it uses the transmit error (the return value of sctp_outq_flush), most of them are actually just save it to sk_err. Except for sctp_assoc/endpoint_bh_rcv, they will drop the chunk if it's failed to send a REPLY, which is actually incorrect, as we can't be sure the error that sctp_outq_flush returns is from sending that REPLY. So it's meaningless for sctp_outq_flush to return error back. This patch is to save transmit error to sk_err in sctp_outq_flush, the new error can update the old value. Eventually, sctp_wait_for_* would check for it. Signed-off-by:
-
Xin Long authored
Last patch "sctp: do not return the transmit err back to sctp_sendmsg" made sctp_primitive_SEND return err only when asoc state is unavailable. In this case, chunks are not enqueued, they have no chance to be freed if we don't take care of them later. This Patch is actually to revert commit 1cd4d5c4 ("sctp: remove the unused sctp_datamsg_free()"), commit 69b5777f ("sctp: hold the chunks only after the chunk is enqueued in outq") and commit 8b570dc9 ("sctp: only drop the reference on the datamsg after sending a msg"), to use sctp_datamsg_free to free the chunks of current msg. Fixes: 8b570dc9 ("sctp: only drop the reference on the datamsg after sending a msg") Signed-off-by:
-
Xin Long authored
Once a chunk is enqueued successfully, sctp queues can take care of it. Even if it is failed to transmit (like because of nomem), it should be put into retransmit queue. If sctp report this error to users, it confuses them, they may resend that msg, but actually in kernel sctp stack is in charge of retransmit it already. Besides, this error probably is not from the failure of transmitting current msg, but transmitting or retransmitting another msg's chunks, as sctp_outq_flush just tries to send out all transports' chunks. This patch is to make sctp_cmd_send_msg return avoid, and not return the transmit err back to sctp_sendmsg Fixes: 8b570dc9 ("sctp: only drop the reference on the datamsg after sending a msg") Signed-off-by:
-
Xin Long authored
Data Chunks are only sent by sctp_primitive_SEND, in which sctp checks the asoc's state through statetable before calling sctp_outq_tail. So there's no need to check the asoc's state again in sctp_outq_tail. Besides, sctp_do_sm is protected by lock_sock, even if sending msg is interrupted by timer events, the event's processes still need to acquire lock_sock first. It means no others CMDs can be enqueue into side effect list before CMD_SEND_MSG to change asoc->state, so it's safe to remove it. This patch is to remove redundant asoc->state check from sctp_outq_tail. Signed-off-by:
-
- 17 Sep, 2016 18 commits
-
-
David S. Miller authored
Alexei Starovoitov says: ==================== ip_tunnel: add collect_md mode to IPv4/IPv6 tunnels Similar to geneve, vxlan, gre tunnels implement 'collect metadata' mode in ipip, ipip6, ip6ip6 tunnels. ==================== Signed-off-by: -
Alexei Starovoitov authored
the test creates 3 namespaces with veth connected via bridge. First two namespaces simulate two different hosts with the same IPv4 and IPv6 addresses configured on the tunnel interface and they communicate with outside world via standard tunnels. Third namespace creates collect_md tunnel that is driven by BPF program which selects different remote host (either first or second namespace) based on tcp dest port number while tcp dst ip is the same. This scenario is rough approximation of load balancer use case. The tests check both traditional tunnel configuration and collect_md mode. Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
Alexei Starovoitov authored
extend existing tests for vxlan, geneve, gre to include IPIP tunnel. It tests both traditional tunnel configuration and dynamic via bpf helpers. Signed-off-by:
-
Alexei Starovoitov authored
Similar to gre, vxlan, geneve tunnels allow IPIP6 and IP6IP6 tunnels to operate in 'collect metadata' mode. Unlike ipv4 code here it's possible to reuse ip6_tnl_xmit() function for both collect_md and traditional tunnels. bpf_skb_[gs]et_tunnel_key() helpers and ovs (in the future) are the users. Signed-off-by:
Thomas Graf <tgraf@suug.ch> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Alexei Starovoitov authored
Similar to gre, vxlan, geneve tunnels allow IPIP tunnels to operate in 'collect metadata' mode. bpf_skb_[gs]et_tunnel_key() helpers can make use of it right away. ovs can use it as well in the future (once appropriate ovs-vport abstractions and user apis are added). Note that just like in other tunnels we cannot cache the dst, since tunnel_info metadata can be different for every packet. Signed-off-by:
-
Julia Lawall authored
Check for net_device_ops structures that are only stored in the netdev_ops field of a net_device structure. This field is declared const, so net_device_ops structures that have this property can be declared as const also. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct net_device_ops i@p = { ... }; @ok@ identifier r.i; struct net_device e; position p; @@ e.netdev_ops = &i@p; @bad@ position p != {r.p,ok.p}; identifier r.i; struct net_device_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct net_device_ops i = { ... }; // </smpl> The result of size on this file before the change is: text data bss dec hex filename 3401 931 44 4376 1118 net/l2tp/l2tp_eth.o and after the change it is: text data bss dec hex filename 3993 347 44 4384 1120 net/l2tp/l2tp_eth.o Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by:
-
Julia Lawall authored
Check for net_device_ops structures that are only stored in the netdev_ops field of a net_device structure. This field is declared const, so net_device_ops structures that have this property can be declared as const also. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct net_device_ops i@p = { ... }; @ok@ identifier r.i; struct net_device e; position p; @@ e.netdev_ops = &i@p; @bad@ position p != {r.p,ok.p}; identifier r.i; struct net_device_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct net_device_ops i = { ... }; // </smpl> The result of size on this file before the change is: text data bss dec hex filename 21623 1316 40 22979 59c3 drivers/net/ethernet/synopsys/dwc_eth_qos.o and after the change it is: text data bss dec hex filename 22199 724 40 22963 59b3 drivers/net/ethernet/synopsys/dwc_eth_qos.o Signed-off-by:
-
Julia Lawall authored
Check for net_device_ops structures that are only stored in the netdev_ops field of a net_device structure. This field is declared const, so net_device_ops structures that have this property can be declared as const also. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct net_device_ops i@p = { ... }; @ok@ identifier r.i; struct net_device e; position p; @@ e.netdev_ops = &i@p; @bad@ position p != {r.p,ok.p}; identifier r.i; struct net_device_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct net_device_ops i = { ... }; // </smpl> The result of size on this file before the change is: text data bss dec hex filename 7995 848 8 8851 2293 drivers/net/ethernet/hisilicon/hip04_eth.o and after the change it is: text data bss dec hex filename 8571 256 8 8835 2283 drivers/net/ethernet/hisilicon/hip04_eth.o Signed-off-by:
-
Alan Cox authored
(As asked by Dave in Februrary) Signed-off-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
-
David Ahern authored
No longer used after e0d56fdd ("net: l3mdev: remove redundant calls") Signed-off-by:
David Ahern <dsa@cumulusnetworks.com> Signed-off-by:
-
David Ahern authored
No longer used after d66f6c0a ("net: ipv4: Remove l3mdev_get_saddr") Signed-off-by:
-
Eric Dumazet authored
With large BDP TCP flows and lossy networks, it is very important to keep a low number of skbs in the write queue. RACK and SACK processing can perform a linear scan of it. We should avoid putting any payload in skb->head, so that SACK shifting can be done if needed. With this patch, we allow to pack ~0.5 MB per skb instead of the 64KB initially cooked at tcp_sendmsg() time. This gives a reduction of number of skbs in write queue by eight. tcp_rack_detect_loss() likes this. We still allow payload in skb->head for first skb put in the queue, to not impact RPC workloads. Signed-off-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
-
David S. Miller authored
Merge tag 'wireless-drivers-next-for-davem-2016-09-15' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 4.9 Major changes: iwlwifi * preparation for new a000 HW continues * some DQA improvements * add support for GMAC * add support for 9460, 9270 and 9170 series mwifiex * support random MAC address for scanning * add HT aggregation support for adhoc mode * add custom regulatory domain support * add manufacturing mode support via nl80211 testmode interface bcma * support BCM53573 series of wireless SoCs bitfield.h * add FIELD_PREP() and FIELD_GET() macros mt7601u * convert to use the new bitfield.h macros brcmfmac * add support for bcm4339 chip with modalias sdio:c00v02D0d4339 ath10k * add nl80211 testmode support for 10.4 firmware * hide kernel addresses from logs using %pK format specifier * implement NAPI support * enable peer stats by default ath9k * use ieee80211_tx_status_noskb where possible wil6210 * extract firmware capabilities from the firmware file ath6kl * enable firmware crash dumps on the AR6004 ath-current is also merged to fix a conflict in ath10k. ==================== Signed-off-by:
-
David S. Miller authored
Tariq Toukan says: ==================== mlx5e Order-0 pages for Striding RQ In this series, we refactor our Striding RQ receive-flow to always use fragmented WQEs (Work Queue Elements) using order-0 pages, omitting the flow that allocates and splits high-order pages which would fragment and deplete high-order pages in the system. The first patch gives a slight degradation, but opens the opportunity to using a simple page-cache mechanism of a fair size. The page-cache, implemented in patch 3, not only closes the performance gap but even gives a gain. In patch 2 we re-organize the code to better manage the calls for alloc/de-alloc pages in the RX flow. Series generated against net-next commit: bed806cb "Merge branch 'mlxsw-ethtool'" ==================== Signed-off-by:
-
Tariq Toukan authored
Instead of reallocating and mapping pages for RX data-path, recycle already used pages in a per ring cache. Performance tests: The following results were measured on a freshly booted system, giving optimal baseline performance, as high-order pages are yet to be fragmented and depleted. We ran pktgen single-stream benchmarks, with iptables-raw-drop: Single stride, 64 bytes: * 4,739,057 - baseline * 4,749,550 - order0 no cache * 4,786,899 - order0 with cache 1% gain Larger packets, no page cross, 1024 bytes: * 3,982,361 - baseline * 3,845,682 - order0 no cache * 4,127,852 - order0 with cache 3.7% gain Larger packets, every 3rd packet crosses a page, 1500 bytes: * 3,731,189 - baseline * 3,579,414 - order0 no cache * 3,931,708 - order0 with cache 5.4% gain Signed-off-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Tariq Toukan authored
Manage the allocation and deallocation of mapped RX pages only through dedicated API functions. Signed-off-by:
-
Tariq Toukan authored
To improve the memory consumption scheme, we omit the flow that demands and splits high-order pages in Striding RQ, and stay with a single Striding RQ flow that uses order-0 pages. Moving to fragmented memory allows the use of larger MPWQEs, which reduces the number of UMR posts and filler CQEs. Moving to a single flow allows several optimizations that improve performance, especially in production servers where we would anyway fallback to order-0 allocations: - inline functions that were called via function pointers. - improve the UMR post process. This patch alone is expected to give a slight performance reduction. However, the new memory scheme gives the possibility to use a page-cache of a fair size, that doesn't inflate the memory footprint, which will dramatically fix the reduction and even give a performance gain. Performance tests: The following results were measured on a freshly booted system, giving optimal baseline performance, as high-order pages are yet to be fragmented and depleted. We ran pktgen single-stream benchmarks, with iptables-raw-drop: Single stride, 64 bytes: * 4,739,057 - baseline * 4,749,550 - this patch no reduction Larger packets, no page cross, 1024 bytes: * 3,982,361 - baseline * 3,845,682 - this patch 3.5% reduction Larger packets, every 3rd packet crosses a page, 1500 bytes: * 3,731,189 - baseline * 3,579,414 - this patch 4% reduction Fixes: 461017cb ("net/mlx5e: Support RX multi-packet WQE (Striding RQ)") Fixes: bc77b240 ("net/mlx5e: Add fragmented memory support for RX multi packet WQE") Signed-off-by:
-
David Howells authored
Add CONFIG_AF_RXRPC_IPV6 and make the IPv6 support code conditional on it. This is then made conditional on CONFIG_IPV6. Without this, the following can be seen: net/built-in.o: In function `rxrpc_init_peer': >> peer_object.c:(.text+0x18c3c8): undefined reference to `ip6_route_output_flags' Reported-by:
kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
- 16 Sep, 2016 11 commits
-
-
David S. Miller authored
John Crispin says: ==================== net-next: dsa: add QCA8K support This series is based on the AR8xxx series posted by Matthieu Olivari in may 2015. The following changes were made since then * fixed the nitpicks from the previous review * updated to latest API * turned it into an mdio device * added callbacks for fdb, bridge offloading, stp, eee, port status * fixed several minor issues to the port setup and arp learning * changed the namespacing as this driver to qca8k The driver has so far only been tested on qca8337/N. It should work on other QCA switches such as the qca8327 with minor changes. ==================== Signed-off-by: -
John Crispin authored
This patch contains initial support for the QCA8337 switch. It will detect a QCA8337 switch, if present and declared in the DT. Each port will be represented through a standalone net_device interface, as for other DSA switches. CPU can communicate with any of the ports by setting an IP@ on ethN interface. Most of the extra callbacks of the DSA subsystem are already supported, such as bridge offloading, stp, fdb. Signed-off-by:
John Crispin <john@phrozen.org> Signed-off-by:
-
John Crispin authored
Add support for the 2-bytes Qualcomm tag that gigabit switches such as the QCA8337/N might insert when receiving packets, or that we need to insert while targeting specific switch ports. The tag is inserted directly behind the ethernet header. Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
-
John Crispin authored
Add device-tree binding for ar8xxx switch families. Cc: devicetree@vger.kernel.org Signed-off-by:
-
Wei Yongjun authored
Remove .owner field if calls are used which set it automatically. Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by:
-
Wei Yongjun authored
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by:
-
Wei Yongjun authored
Remove including <linux/version.h> that don't need it. Signed-off-by:
-
Wei Yongjun authored
Fixes the following sparse warning: drivers/net/dsa/bcm_sf2.c:963:19: warning: symbol 'bcm_sf2_io_ops' was not declared. Should it be static? Signed-off-by:
-
Eric Dumazet authored
When skb replaces another one in ooo queue, I forgot to also update tp->ooo_last_skb as well, if the replaced skb was the last one in the queue. To fix this, we simply can re-use the code that runs after an insertion, trying to merge skbs at the right of current skb. This not only fixes the bug, but also remove all small skbs that might be a subset of the new one. Example: We receive segments 2001:3001, 4001:5001 Then we receive 2001:8001 : We should replace 2001:3001 with the big skb, but also remove 4001:50001 from the queue to save space. packetdrill test demonstrating the bug 0.000 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 +0 bind(3, ..., ...) = 0 +0 listen(3, 1) = 0 +0 < S 0:0(0) win 32792 <mss 1000,sackOK,nop,nop,nop,wscale 7> +0 > S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK,nop,wscale 7> +0.100 < . 1:1(0) ack 1 win 1024 +0 accept(3, ..., ...) = 4 +0.01 < . 1001:2001(1000) ack 1 win 1024 +0 > . 1:1(0) ack 1 <nop,nop, sack 1001:2001> +0.01 < . 1001:3001(2000) ack 1 win 1024 +0 > . 1:1(0) ack 1 <nop,nop, sack 1001:2001 1001:3001> Fixes: 9f5afeae ("tcp: use an RB tree for ooo receive queue") Signed-off-by:
-
David S. Miller authored
Sean Wang says: ==================== mediatek: add enhancement into the existing reset flow Current driver only resets DMA used by descriptor rings which can't guarantee it can recover all various kinds of fatal errors, so the patch 1) tries to reset the underlying hardware resource from scratch on Mediatek SoC required for ethernet running. 2) refactors code in order to the reusability of existing code. 3) considers handling for race condition between the reset flow and callbacks registered into core driver called about hardware accessing. 4) introduces power domain usage to hardware setup which leads to have cleanly and completely restore to the state as the initial. Changes since v1: - fix the build error with module built causing undefined symbol for pinctrl_bind_pins, so using pinctrl_select_state instead accomplishes the pin mux setup during the reset process. ==================== Reviewed-by:
Steve Wise <swise@opengridcomputing.com> Signed-off-by:
-
Sean Wang authored
add the protection of the race condition between the reset process and hardware access happening on the related callbacks. Signed-off-by:
Sean Wang <sean.wang@mediatek.com> Signed-off-by:
-
