- 20 Jan, 2017 18 commits
-
-
Lance Richardson authored
Cast second parameter of csum_sub() from __sum16 to __wsum. Signed-off-by:
Lance Richardson <lrichard@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Jon Maloy says: ==================== tipc: emulate multicast through replication TIPC multicast messages are currently distributed via L2 broadcast or IP multicast to all nodes in the cluster, irrespective of the number of real destinations of the message. In this series we introduce an option to transport messages via replication ("replicast") across a selected number of unicast links, instead of relying on the underlying media. This option is used when true broadcast/multicast is not supported by the media, or when the number of true destinations is much smaller than the cluster size. ==================== Signed-off-by: -
Jon Paul Maloy authored
If the bearer carrying multicast messages supports broadcast, those messages will be sent to all cluster nodes, irrespective of whether these nodes host any actual destinations socket or not. This is clearly wasteful if the cluster is large and there are only a few real destinations for the message being sent. In this commit we extend the eligibility of the newly introduced "replicast" transmit option. We now make it possible for a user to select which method he wants to be used, either as a mandatory setting via setsockopt(), or as a relative setting where we let the broadcast layer decide which method to use based on the ratio between cluster size and the message's actual number of destination nodes. In the latter case, a sending socket must stick to a previously selected method until it enters an idle period of at least 5 seconds. This eliminates the risk of message reordering caused by method change, i.e., when changes to cluster size or number of destinations would otherwise mandate a new method to be used. Reviewed-by:
Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Acked-by:
Ying Xue <ying.xue@windriver.com> Signed-off-by:
Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
-
Jon Paul Maloy authored
TIPC multicast messages are currently carried over a reliable 'broadcast link', making use of the underlying media's ability to transport packets as L2 broadcast or IP multicast to all nodes in the cluster. When the used bearer is lacking that ability, we can instead emulate the broadcast service by replicating and sending the packets over as many unicast links as needed to reach all identified destinations. We now introduce a new TIPC link-level 'replicast' service that does this. Reviewed-by:
-
Jon Paul Maloy authored
As a further preparation for the upcoming 'replicast' functionality, we add some necessary structs and functions for looking up and returning a list of all nodes that host destinations for a given multicast message. Reviewed-by:
-
Jon Paul Maloy authored
As a preparation for the 'replicast' functionality we are going to introduce in the next commits, we need the broadcast base structure to store whether bearer broadcast is available at all from the currently used bearer or bearers. We do this by adding a new function tipc_bearer_bcast_support() to the bearer layer, and letting the bearer selection function in bcast.c use this to give a new boolean field, 'bcast_support' the appropriate value. Reviewed-by:
-
Gianluca Borello authored
Provide a simple helper with the same semantics of strncpy_from_unsafe(): int bpf_probe_read_str(void *dst, int size, const void *unsafe_addr) This gives more flexibility to a bpf program. A typical use case is intercepting a file name during sys_open(). The current approach is: SEC("kprobe/sys_open") void bpf_sys_open(struct pt_regs *ctx) { char buf[PATHLEN]; // PATHLEN is defined to 256 bpf_probe_read(buf, sizeof(buf), ctx->di); /* consume buf */ } This is suboptimal because the size of the string needs to be estimated at compile time, causing more memory to be copied than often necessary, and can become more problematic if further processing on buf is done, for example by pushing it to userspace via bpf_perf_event_output(), since the real length of the string is unknown and the entire buffer must be copied (and defining an unrolled strnlen() inside the bpf program is a very inefficient and unfeasible approach). With the new helper, the code can easily operate on the actual string length rather than the buffer size: SEC("kprobe/sys_open") void bpf_sys_open(struct pt_regs *ctx) { char buf[PATHLEN]; // PATHLEN is defined to 256 int res = bpf_probe_read_str(buf, sizeof(buf), ctx->di); /* consume buf, for example push it to userspace via * bpf_perf_event_output(), but this time we can use * res (the string length) as event size, after checking * its boundaries. */ } Another useful use case is when parsing individual process arguments or individual environment variables navigating current->mm->arg_start and current->mm->env_start: using this helper and the return value, one can quickly iterate at the right offset of the memory area. The code changes simply leverage the already existent strncpy_from_unsafe() kernel function, which is safe to be called from a bpf program as it is used in bpf_trace_printk(). Signed-off-by:Gianluca Borello <g.borello@gmail.com> Acked-by:
Alexei Starovoitov <ast@kernel.org> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
David S. Miller authored
Phil Sutter says: ==================== Retrieve number of VFs in a bus-agnostic way Previously, it was assumed that only PCI NICs would be capable of having virtual functions - with my proposed enhancement of dummy NIC driver implementing (fake) ones for testing purposes, this is no longer true. Discussion of said patch has led to the suggestion of implementing a bus-agnostic method for VF count retrieval so rtnetlink could work with both real VF-capable PCI NICs as well as my dummy modifications without introducing ugly hacks. The following series tries to achieve just that by introducing a bus type callback to retrieve a device's number of VFs, implementing this callback for PCI bus and finally adjusting rtnetlink to make use of the generalized infrastructure. ==================== Signed-off-by: -
Phil Sutter authored
Now that pci_bus_type has num_vf callback set, dev_num_vf can be implemented in a bus type independent way and the check for whether a PCI device is being handled in rtnetlink can be dropped. Signed-off-by:
Phil Sutter <phil@nwl.cc> Signed-off-by:
-
Phil Sutter authored
Signed-off-by:
-
Phil Sutter authored
This allows for bus types to implement their own method of retrieving the number of virtual functions a NIC on that type of bus supports. Signed-off-by:
-
Geliang Tang authored
Use hlist_entry_safe() instead of open-coding it. Signed-off-by:
Geliang Tang <geliangtang@gmail.com> Signed-off-by:
-
Jakub Sitnicki authored
Commit b05229f4 ("gre6: Cleanup GREv6 transmit path, call common GRE functions") removed the ip6gre specific transmit function, but left the struct ipv6_tel_txoption definition. Clean it up. Signed-off-by:
Jakub Sitnicki <jkbs@redhat.com> Signed-off-by:
-
Eric Dumazet authored
Shaohua Li made percpu_counter irq safe in commit 098faf58 ("percpu_counter: make APIs irq safe") We can safely remove BH disable/enable sections around various percpu_counter manipulations. Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Arnd Bergmann authored
The two new variables are only used inside of an #ifdef and cause harmless warnings when that is disabled: drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c: In function 'init_one': drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:4646:9: error: unused variable 'port_vec' [-Werror=unused-variable] drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:4646:6: error: unused variable 'v' [-Werror=unused-variable] This adds another #ifdef around the declarations. Fixes: 96fe11f2 ("cxgb4: Implement ndo_get_phys_port_id for mgmt dev") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
David Ahern authored
IPv6 deletes route entries associated with multipath routes on an admin down where IPv4 does not. For example: $ ip ro ls vrf red unreachable default metric 8192 1.1.1.0/24 metric 64 nexthop via 10.100.1.254 dev eth1 weight 1 nexthop via 10.100.2.254 dev eth2 weight 1 10.100.1.0/24 dev eth1 proto kernel scope link src 10.100.1.4 10.100.2.0/24 dev eth2 proto kernel scope link src 10.100.2.4 $ ip -6 ro ls vrf red 2001:db8:1::/120 dev eth1 proto kernel metric 256 pref medium 2001:db8:2:: dev red proto none metric 0 pref medium 2001:db8:2::/120 dev eth2 proto kernel metric 256 pref medium 2001:db8:11::/120 via 2001:db8:1::16 dev eth1 metric 1024 pref medium 2001:db8:11::/120 via 2001:db8:2::17 dev eth2 metric 1024 pref medium ... Set link down: $ ip li set eth1 down IPv4 retains the multihop route but flags eth1 route as dead: $ ip ro ls vrf red unreachable default metric 8192 1.1.1.0/24 nexthop via 10.100.1.16 dev eth1 weight 1 dead linkdown nexthop via 10.100.2.16 dev eth2 weight 1 10.100.2.0/24 dev eth2 proto kernel scope link src 10.100.2.4 and IPv6 deletes the route as part of flushing all routes for the device: $ ip -6 ro ls vrf red 2001:db8:2:: dev red proto none metric 0 pref medium 2001:db8:2::/120 dev eth2 proto kernel metric 256 pref medium 2001:db8:11::/120 via 2001:db8:2::17 dev eth2 metric 1024 pref medium ... Worse, on admin up of the device the multipath route has to be deleted to get this leg of the route re-added. This patch keeps routes that are part of a multipath route if ignore_routes_with_linkdown is set with the dead and linkdown flags enabling consistency between IPv4 and IPv6: $ ip -6 ro ls vrf red 2001:db8:2:: dev red proto none metric 0 pref medium 2001:db8:2::/120 dev eth2 proto kernel metric 256 pref medium 2001:db8:11::/120 via 2001:db8:1::16 dev eth1 metric 1024 dead linkdown pref medium 2001:db8:11::/120 via 2001:db8:2::17 dev eth2 metric 1024 pref medium ... Signed-off-by:David Ahern <dsa@cumulusnetworks.com> Signed-off-by:
-
Eric Dumazet authored
Commit 04aeb56a ("net/mlx4_en: allocate non 0-order pages for RX ring with __GFP_NOMEMALLOC") added code that appears to be not needed at that time, since mlx4 never used __GFP_MEMALLOC allocations anyway. As using memory reserves is a must in some situations (swap over NFS or iSCSI), this patch adds this flag. Note that this driver does not reuse pages (yet) so we do not have to add anything else. Signed-off-by:
-
Timur Tabi authored
This reverts commit 3e884493. With commit 529ed127 ("net: phy: phy drivers should not set SUPPORTED_[Asym_]Pause"), phylib now handles automatically enabling pause frame support in the PHY, and the MAC driver should follow suit. Since the EMAC driver driver does this, we no longer need to force pause frames support. Signed-off-by:
Timur Tabi <timur@codeaurora.org> Signed-off-by:
-
- 19 Jan, 2017 4 commits
-
-
Volodymyr Bendiuga authored
Some bus names are pretty long and do not fit into 17 chars. Increase therefore MII_BUS_ID_SIZE and phy_fixup.bus_id to larger number. Now mii_bus.id can host larger name. Signed-off-by:
Volodymyr Bendiuga <volodymyr.bendiuga@gmail.com> Signed-off-by:
Magnus Öberg <magnus.oberg@westermo.se> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Andrei.Pistirica@microchip.com authored
This patch does the following: - MACB/GEM-PTP interface - registers and bitfields for TSU - capability flags to enable PTP per platform basis Signed-off-by:
Andrei Pistirica <andrei.pistirica@microchip.com> Acked-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by:
-
Tobias Klauser authored
The stats member of struct chnl_net is used nowhere in the code, so it might as well be removed. Signed-off-by:
Tobias Klauser <tklauser@distanz.ch> Signed-off-by:
-
Arnd Bergmann authored
The new ARP support has pushed the stack size over the edge on ARM, as there are two large objects on the stack in this function (mask and tb) and both have now grown a bit more: net/sched/cls_flower.c: In function 'fl_change': net/sched/cls_flower.c:928:1: error: the frame size of 1072 bytes is larger than 1024 bytes [-Werror=frame-larger-than=] We can solve this by dynamically allocating one or both of them. I first tried to do it just for the mask, but that only saved 152 bytes on ARM, while this version just does it for the 'tb' array, bringing the stack size back down to 664 bytes. Fixes: 99d31326 ("net/sched: cls_flower: Support matching on ARP") Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
- 18 Jan, 2017 18 commits
-
-
Tobias Klauser authored
The network stack no longer uses the last_rx member of struct net_device since the bonding driver switched to use its own private last_rx in commit 9f242738 ("bonding: use last_arp_rx in slave_last_rx()"). However, some drivers still (ab)use the field for their own purposes and some driver just update it without actually using it. Previously, there was an accompanying comment for the last_rx member added in commit 4dc89133 ("net: add a comment on netdev->last_rx") which asked drivers not to update is, unless really needed. However, this commend was removed in commit f8ff080d ("bonding: remove useless updating of slave->dev->last_rx"), so some drivers added later on still did update last_rx. Remove all usage of last_rx and switch three drivers (sky2, atp and smc91c92_cs) which actually read and write it to use their own private copy in netdev_priv. Compile-tested with allyesconfig and allmodconfig on x86 and arm. Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Cc: Mirko Lindner <mlindner@marvell.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by:
-
Vivien Didelot authored
Now that the DSA Ethernet switches are true Linux devices, the CPU switch is not necessarily the first one. If its address is higher than the second switch on the same MDIO bus, its index will be 1, not 0. Avoid any confusion by using dst->cpu_switch instead of dst->ds[0]. Signed-off-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Reviewed-by:
-
Vivien Didelot authored
Store a dsa_switch pointer to the CPU switch in the tree instead of only its index. This avoids the need to initialize it to -1. Signed-off-by:
-
Ivan Khoronzhuk authored
Check "ch" on NULL first, then get ctlr. Signed-off-by:
Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by:
-
David S. Miller authored
Jason Wang says: ==================== vhost_net tx batching This series tries to implement tx batching support for vhost. This was done by using MSG_MORE as a hint for under layer socket. The backend (e.g tap) can then batch the packets temporarily in a list and submit it all once the number of bacthed exceeds a limitation. Tests shows obvious improvement on guest pktgen over over mlx4(noqueue) on host: Mpps -+% rx-frames = 0 0.91 +0% rx-frames = 4 1.00 +9.8% rx-frames = 8 1.00 +9.8% rx-frames = 16 1.01 +10.9% rx-frames = 32 1.07 +17.5% rx-frames = 48 1.07 +17.5% rx-frames = 64 1.08 +18.6% rx-frames = 64 (no MSG_MORE) 0.91 +0% Changes from V4: - stick to NAPI_POLL_WEIGHT for rx-frames is user specify a value greater than it. Changes from V3: - use ethtool instead of module parameter to control the maximum number of batched packets - avoid overhead when MSG_MORE were not set and no packet queued Changes from V2: - remove uselss queue limitation check (and we don't drop any packet now) Changes from V1: - drop NAPI handler since we don't use NAPI now - fix the issues that may exceeds max pending of zerocopy - more improvement on available buffer detection - move the limitation of batched pacekts from vhost to tuntap ==================== Signed-off-by: -
Jason Wang authored
We can only process 1 packet at one time during sendmsg(). This often lead bad cache utilization under heavy load. So this patch tries to do some batching during rx before submitting them to host network stack. This is done through accepting MSG_MORE as a hint from sendmsg() caller, if it was set, batch the packet temporarily in a linked list and submit them all once MSG_MORE were cleared. Tests were done by pktgen (burst=128) in guest over mlx4(noqueue) on host: Mpps -+% rx-frames = 0 0.91 +0% rx-frames = 4 1.00 +9.8% rx-frames = 8 1.00 +9.8% rx-frames = 16 1.01 +10.9% rx-frames = 32 1.07 +17.5% rx-frames = 48 1.07 +17.5% rx-frames = 64 1.08 +18.6% rx-frames = 64 (no MSG_MORE) 0.91 +0% User were allowed to change per device batched packets through ethtool -C rx-frames. NAPI_POLL_WEIGHT were used as upper limitation to prevent bh from being disabled too long. Signed-off-by:Jason Wang <jasowang@redhat.com> Acked-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Jason Wang authored
This patch tries to utilize tuntap rx batching by peeking the tx virtqueue during transmission, if there's more available buffers in the virtqueue, set MSG_MORE flag for a hint for backend (e.g tuntap) to batch the packets. Reviewed-by:
Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by:
-
Jason Wang authored
This patch tries to do several tweaks on vhost_vq_avail_empty() for a better performance: - check cached avail index first which could avoid userspace memory access. - using unlikely() for the failure of userspace access - check vq->last_avail_idx instead of cached avail index as the last step. This patch is need for batching supports which needs to peek whether or not there's still available buffers in the ring. Reviewed-by:
-
Mao Wenan authored
Relax ordering(RO) is one feature of 82599 NIC, to enable this feature can enhance the performance for some cpu architecure, such as SPARC and so on. Currently it only supports one special cpu architecture(SPARC) in 82599 driver to enable RO feature, this is not very common for other cpu architecture which really needs RO feature. This patch add one common config CONFIG_ARCH_WANT_RELAX_ORDER to set RO feature, and should define CONFIG_ARCH_WANT_RELAX_ORDER in sparc Kconfig firstly. Signed-off-by:
Mao Wenan <maowenan@huawei.com> Reviewed-by:
Alexander Duyck <alexander.duyck@gmail.com> Reviewed-by:
Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by:
-
David S. Miller authored
David Ahern says: ==================== net: ipv6: simplify rt6_fill_node Remove a couple of unnecessary input arguments to rt6_fill_node. ==================== Signed-off-by: -
David Ahern authored
The prefix arg to rt6_fill_node is non-0 in only 1 path - rt6_dump_route where a user is requesting a prefix only dump. Simplify rt6_fill_node by removing the prefix arg and moving the prefix check to rt6_dump_route. Signed-off-by:
-
David Ahern authored
All callers of rt6_fill_node pass 0 for nowait arg. Remove the arg and simplify rt6_fill_node accordingly. rt6_fill_node passes the nowait of 0 to ip6mr_get_route. Remove the nowait arg from it as well. Signed-off-by:
-
David S. Miller authored
Xin Long says: ==================== sctp: add sender-side procedures for stream reconf ssn reset request chunk Patch 6/6 is to implement sender-side procedures for the Outgoing and Incoming SSN Reset Request Parameter described in rfc6525 section 5.1.2 and 5.1.3 Patches 1-5/6 are ahead of it to define some apis and asoc members for it. Note that with this patchset, asoc->reconf_enable has no chance yet to be set, until the patch "sctp: add get and set sockopt for reconf_enable" is applied in the future. As we can not just enable it when sctp is not capable of processing reconf chunk yet. v1->v2: - put these into a smaller group. - rename some temporary variables in the codes. - rename the titles of the commits and improve some changelogs. v2->v3: - re-split the patchset and make sure it has no dead codes for review. v3->v4: - move sctp_make_reconf() into patch 1/6 to avoid kbuild warning. - drop unused struct sctp_strreset_req. ==================== Signed-off-by: -
Xin Long authored
This patch is to implement sender-side procedures for the Outgoing and Incoming SSN Reset Request Parameter described in rfc6525 section 5.1.2 and 5.1.3. It is also add sockopt SCTP_RESET_STREAMS in rfc6525 section 6.3.2 for users. Note that the new asoc member strreset_outstanding is to make sure only one reconf request chunk on the fly as rfc6525 section 5.1.1 demands. Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
Xin Long authored
This patch is to add sockopt SCTP_ENABLE_STREAM_RESET to get/set strreset_enable to indicate which reconf request type it supports, which is described in rfc6525 section 6.3.1. Signed-off-by:
-
Xin Long authored
This patch is to add reconf_enable field in all of asoc ep and netns to indicate if they support stream reset. When initializing, asoc reconf_enable get the default value from ep reconf_enable which is from netns netns reconf_enable by default. It is also to add reconf_capable in asoc peer part to know if peer supports reconf_enable, the value is set if ext params have reconf chunk support when processing init chunk, just as rfc6525 section 5.1.1 demands. Signed-off-by:
-
Xin Long authored
This patch is to add a primitive based on sctp primitive frame for sending stream reconf request. It works as the other primitives, and create a SCTP_CMD_REPLY command to send the request chunk out. sctp_primitive_RECONF would be the api to send a reconf request chunk. Signed-off-by:
-
Xin Long authored
This patch is to add a per transport timer based on sctp timer frame for stream reconf chunk retransmission. It would start after sending a reconf request chunk, and stop after receiving the response chunk. If the timer expires, besides retransmitting the reconf request chunk, it would also do the same thing with data RTO timer. like to increase the appropriate error counts, and perform threshold management, possibly destroying the asoc if sctp retransmission thresholds are exceeded, just as section 5.1.1 describes. This patch is also to add asoc strreset_chunk, it is used to save the reconf request chunk, so that it can be retransmitted, and to check if the response is really for this request by comparing the information inside with the response chunk as well. Signed-off-by:
-
