- 26 Feb, 2018 2 commits
-
-
Ville Syrjälä authored
Currently we only check that the plane supports the pixel format of the fb we're about to feed to it. Extend it to check also the modifier, and more specifically that the combination of the format and modifier is supported. Cc: dri-devel@lists.freedesktop.org Cc: Ben Widawsky <ben@bwidawsk.net> Cc: Jason Ekstrand <jason@jlekstrand.net> Cc: Daniel Stone <daniels@collabora.com> Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171222192231.17981-8-ville.syrjala@linux.intel.comReviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Thierry Reding authored
DRM_DUMB_VGA_DAC is a user-visible symbol. Selecting it can cause unmet direct dependencies such as this (on i386, randconfig): warning: (DRM_PL111) selects DRM_DUMB_VGA_DAC which has unmet direct dependencies (HAS_IOMEM && DRM && DRM_BRIDGE && OF) This is because DRM_DUMB_VGA_DAC depends on OF while DRM_PL111 does not. It does indirectly depend on OF via the ARM and ARM64 dependencies, but since it can also be enabled under COMPILE_TEST, randconfig can find a case where DRM_PL111 is selected without pulling in OF and not meeting the dependency for DRM_DUMB_VGA_DAC. Since select is "heavy handed", DRM_DUMB_VGA_DAC is going to be enabled regardless of the above warning and causes the following build error: ../drivers/gpu/drm/bridge/dumb-vga-dac.c: In function 'dumb_vga_probe': ../drivers/gpu/drm/bridge/dumb-vga-dac.c:207:13: error: 'struct drm_bridge' has no member named 'of_node' vga->bridge.of_node = pdev->dev.of_node; See Documentation/kbuild/kconfig-language.txt, "reverse dependencies". Fixes: 49f81d80 ("drm/pl111: Support handling bridge timings") Reported-by:
Randy Dunlap <rdunlap@infradead.org> Reviewed-by:
Eric Anholt <eric@anholt.net> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Archit Taneja <architt@codeaurora.org> Cc: Eric Anholt <eric@anholt.net> Signed-off-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
Archit Taneja <archit@cradlewise.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180220102903.27787-1-thierry.reding@gmail.com
-
- 23 Feb, 2018 1 commit
-
-
Benjamin Gaignard authored
In all cases we have to check pitch and size calculations to speed up data transfer. Fixes: 21f815bf ("drm/stm: drv: Improve data transfers") Signed-off-by:
Benjamin Gaignard <benjamin.gaignard@linaro.org> Tested-by:
Philippe Cornu <philippe.cornu@st.com> Reviewed-by:
-
- 22 Feb, 2018 11 commits
-
-
Linus Walleij authored
These clocks are in kHz not in Hz, oops. Fix it so my new bandwidth calculations patch starts working with these panels. Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180211103840.18764-1-linus.walleij@linaro.org
-
Oleksandr Andrushchenko authored
Do not use deprecated drm_driver.{enable|disable)_vblank callbacks, but use drm_simple_kms_helpe's pipe callbacks instead. Signed-off-by:Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Cc: Eric Anholt <eric@anholt.net> Reviewed-by:
-
Oleksandr Andrushchenko authored
Do not use deprecated drm_driver.{enable|disable)_vblank callbacks, but use drm_simple_kms_helpe's pipe callbacks instead. Signed-off-by: -
Oleksandr Andrushchenko authored
Do not use deprecated drm_driver.{enable|disable)_vblank callbacks, but use drm_simple_kms_helpe's pipe callbacks instead. Signed-off-by:Marek Vasut <marex@denx.de> Signed-off-by:
-
Oleksandr Andrushchenko authored
If simple_kms_helper based driver needs to work with vblanks, then it has to provide drm_driver.{enable|disable}_vblank callbacks, because drm_simple_kms_helper.drm_crtc_funcs does not provide any. At the same time drm_driver.{enable|disable}_vblank callbacks are marked as deprecated and shouldn't be used by new drivers. Fix this by extending drm_simple_kms_helper.drm_crtc_funcs to provide the missing callbacks. Signed-off-by: -
Arnd Bergmann authored
When comparing two variables with min()/max(), they should be the same type: drivers/gpu/drm/drm_memory.c: In function 'drm_get_max_iomem': include/linux/kernel.h:821:16: error: comparison of distinct pointer types lacks a cast [-Werror] (void) (&max1 == &max2); This makes the local variable in drm_get_max_iomem make the type from resource->end. Fixes: 82626363 ("drm: add func to get max iomem address v2") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180222114804.1394300-1-arnd@arndb.de
-
Oleksandr Andrushchenko authored
It is possible that drm_simple_kms_plane_atomic_check called with no CRTC set, e.g. when user-space application sets CRTC_ID/FB_ID to 0 before doing any actual drawing. This leads to NULL pointer dereference because in this case new CRTC state is NULL and must be checked before accessing. Signed-off-by:
-
Maxime Ripard authored
We've had some code for quite some time to prevent the alpha bug from happening on the lowest primary plane. Since we now check for this in our atomic_check, we can simply remove it. Reviewed-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/965180afd8169ccaa848f061d16a2c1a9ec4d289.1518802627.git-series.maxime.ripard@bootlin.com
-
Maxime Ripard authored
Now that we have everything in place, we can make zpos configurable now. Change the zpos property from an immutable one to a regular. Reviewed-by:
-
Maxime Ripard authored
The plane description structure was mostly needed to differentiate the formats usable on the primary plane (because of its lowest position), and assign the pipes. Now that both are dynamically checked and assigned, we can remove the static definition. Reviewed-by:
-
Maxime Ripard authored
Since we now have a way to enforce the zpos, check for the number of alpha planes, the only missing part is to assign our pipe automatically instead of hardcoding it. The algorithm is quite simple, but requires two iterations over the list of planes. In the first one (which is the same one that we've had to check for alpha, the frontend usage, and so on), we order the planes by their zpos. We can then do a second iteration over that array by ascending zpos starting with the pipe 0. When and if we encounter our alpha plane, we put it and all the other subsequent planes in the second pipe. Reviewed-by:
-
- 20 Feb, 2018 16 commits
-
-
Chris Wilson authored
When we descend the tree to find our slot, if we step to the right, we are no longer the leftmost node. Fixes: f808c13f ("lib/interval_tree: fast overlap detection") Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Christian König <christian.koenig@amd.com> Reviewed-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Acked-by: Christian König <christian.koenig@amd.com> for now. Link: https://patchwork.freedesktop.org/patch/msgid/20180220093738.1461-1-chris@chris-wilson.co.uk
-
Meghana Madhyastha authored
Replace of_find_backlight_by_node and of the code around it with of_find_backlight helper to avoid repetition of code. Reviewed-by:
Noralf Trønnes <noralf@tronnes.org> Signed-off-by:
Meghana Madhyastha <meghana.madhyastha@gmail.com> Signed-off-by:
-
Meghana Madhyastha authored
Replace of_find_backlight_by_node and of the code around it with of_find_backlight helper to avoid repetition of code. Reviewed-by:
-
Meghana Madhyastha authored
Use backlight_enable/disable helpers instead of changing the property and calling backlight_update_status for cleaner and simpler code and also to avoid repetitions. Reviewed-by:
-
Meghana Madhyastha authored
Use backlight_enable/disable helpers instead of changing the property and calling backlight_update_status for cleaner and simpler code and also to avoid repetitions. Reviewed-by:
-
Meghana Madhyastha authored
Call devm_of_find_backlight (the devres version) instead of of_find_backlight. Reviewed-by:
-
Meghana Madhyastha authored
Remove tinydrm_of_find_backlight from tinydrm-helpers.c. We now have a generic of_find_backlight defined in backlight.c. Let the callers of tinydrm_of_find_backlight call of_find_backlight. Also, remove select BACKLIGHT_LCD_SUPPORT and select BACKLIGHT_CLASS_DEVICE from tinydrm/Kconfig as it is a hack that is no longer needed. Reviewed-by:
-
Meghana Madhyastha authored
Remove tinydrm_enable/disable_backlight and let the callers call the more generic backlight_enable/disable helpers Reviewed-by:
-
Sean Paul authored
Merge tag 'topic/backlight_for_lag-2018-01-29' of git://anongit.freedesktop.org/drm/drm-misc into drm-misc-next This contains the backlight portion of Meghana Madhyastha's patch set to migrate the backlight helpers from tinydrm to the backlight subsystem. https://patchwork.freedesktop.org/series/36522/ Cc: Meghana Madhyastha <meghana.madhyastha@gmail.com> Signed-off-by:
-
Jani Nikula authored
A bit boring documentation fix, but gets rid of the warnings: ./include/drm/drm_connector.h:370: warning: Function parameter or member 'margins.left' not described in 'drm_tv_connector_state' ./include/drm/drm_connector.h:370: warning: Function parameter or member 'margins.right' not described in 'drm_tv_connector_state' ./include/drm/drm_connector.h:370: warning: Function parameter or member 'margins.top' not described in 'drm_tv_connector_state' ./include/drm/drm_connector.h:370: warning: Function parameter or member 'margins.bottom' not described in 'drm_tv_connector_state' [Depends on fe7bc493 ("scripts: kernel-doc: support in-line comments on nested structs/unions") in docs-next to actually fix the warnings.] Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180219104009.4887-1-jani.nikula@intel.com
-
Daniel Vetter authored
Support for this just recently landed in linux-next. Reviewed-by:
Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180219225356.24996-5-daniel.vetter@ffwll.ch
-
Daniel Vetter authored
Quoting the module option format looks soo much nicer, and avoids sphinx spewing errors about markup issues. v2: Fix typo in commit message (Thierry). Reviewed-by:
-
Daniel Vetter authored
Move it out of the csv dungeon. While at it add the missing link to the helper functions for setting up the "panel rotation" property. Also OCD how we list enum property values and their corresponding docs. Going for a nest definition list seams cleanest, no need for also making it an uordered list. Cc: Sean Paul <seanpaul@chromium.org> Cc: Hans de Goede <hdegoede@redhat.com> Reviewed-by:
-
Daniel Vetter authored
Just a bit of drive-by OCD. All the other property docs use enumerations, for some nice visual consistency. It also neatly highlights the property name. Reviewed-by:
-
Daniel Vetter authored
Motivated by patch review. The table is really hard to read in source form, hard to edit, and we've moved away to more focused sections about specific features and how they're exposed in properties. Those sections can then more easily enumerate options, link to helper functions and other parts of the docs. All things that get ugly real fast in the docs. Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by:
-
Linus Walleij authored
The PL111 needs to filter valid modes based on memory bandwidth. I guess it is a pretty simple operation, so we can still claim the DRM KMS helper pipeline is simple after adding this (optional) vtable callback. Reviewed-by:
-
- 19 Feb, 2018 7 commits
-
-
Daniel Vetter authored
Suggested-by:
-
Chris Wilson authored
Use the new idr_init_base() function to create an IDR that knows id==0 is never allocated as it maps to an invalid identifier. By knowing that id==0 is invalid, the IDR can start from id=1 instead avoiding the issue of having to start each lookup from the zeroth leaf as id==0 is always unused (and thus the tree-of-bitmaps indicate that is the first available). References: 6ce711f2 ("idr: Make 1-based IDRs more efficient") Signed-off-by:
-
Joe Moriarty authored
The Parfait (version 2.1.0) static code analysis tool found the following NULL pointer derefernce problem. - drivers/gpu/drm/drm_edid.c The call to drm_cvt_mode() in function drm_mode_std() for the HDTV hack resulted in the possibility of accessing a NULL pointer if drm_mode_std() returned NULL. A check for this added right after the call to drm_cvt_mode() in this particular area of code. Signed-off-by:
Joe Moriarty <joe.moriarty@oracle.com> Reviewed-by:
Steven Sistare <steven.sistare@oracle.com> Signed-off-by:
-
Joe Moriarty authored
The Parfait (version 2.1.0) static code analysis tool found the following NULL pointer derefernce problem. - drivers/gpu/drm/drm_dp_mst_topology.c The call to drm_dp_calculate_rad() in function drm_dp_port_setup_pdt() could result in a NULL pointer being returned to port->mstb due to a failure to allocate memory for port->mstb. Signed-off-by:
-
Chris Wilson authored
drivers/dma-buf/sw_sync.c:248: warning: No description found for parameter 'obj' drivers/dma-buf/sw_sync.c:248: warning: No description found for parameter 'value' drivers/dma-buf/sw_sync.c:248: warning: Excess function parameter 'parent' description in 'sync_pt_create' drivers/dma-buf/sw_sync.c:248: warning: Excess function parameter 'inc' description in 'sync_pt_create' Signed-off-by:
-
Chris Wilson authored
drivers/gpu/drm/drm_lease.c:56: warning: No description found for parameter 'lessee_id' drivers/gpu/drm/drm_lease.c:56: warning: Excess function parameter 'id' description in '_drm_find_lessee' drivers/gpu/drm/drm_lease.c:114: warning: No description found for parameter 'file_priv' drivers/gpu/drm/drm_lease.c:114: warning: Excess function parameter 'master' description in '_drm_lease_held' drivers/gpu/drm/drm_lease.c:134: warning: No description found for parameter 'file_priv' drivers/gpu/drm/drm_lease.c:134: warning: Excess function parameter 'master' description in 'drm_lease_held' drivers/gpu/drm/drm_lease.c:158: warning: No description found for parameter 'crtcs_in' drivers/gpu/drm/drm_lease.c:158: warning: Excess function parameter 'crtcs' description in 'drm_lease_filter_crtcs' drivers/gpu/drm/drm_lease.c:311: warning: No description found for parameter 'top' drivers/gpu/drm/drm_lease.c:311: warning: Excess function parameter 'master' description in '_drm_lease_revoke' drivers/gpu/drm/drm_lease.c:494: warning: No description found for parameter 'lessor_priv' drivers/gpu/drm/drm_lease.c:494: warning: Excess function parameter 'file_priv' description in 'drm_mode_create_lease_ioctl' drivers/gpu/drm/drm_lease.c:672: warning: No description found for parameter 'lessee_priv' drivers/gpu/drm/drm_lease.c:672: warning: Excess function parameter 'file_priv' description in 'drm_mode_get_lease_ioctl' drivers/gpu/drm/drm_lease.c:733: warning: No description found for parameter 'lessor_priv' drivers/gpu/drm/drm_lease.c:733: warning: Excess function parameter 'file_priv' description in 'drm_mode_revoke_lease_ioctl' Signed-off-by:
-
Colin Ian King authored
The structure bochs_bo_driver is local to the source and does not need to be in global scope, so make it static. Cleans up sparse warning: drivers/gpu/drm/bochs/bochs_mm.c:197:22: warning: symbol 'bochs_bo_driver' was not declared. Should it be static? Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
- 18 Feb, 2018 3 commits
-
-
Ørjan Eide authored
When mapping external DMA-bufs through the PRIME mmap call, we might be given an offset which has to be respected. However for the internal DRM GEM mmap path, we have to ignore the fake mmap offset used to identify the buffer only. Currently the code always zeroes out vma->vm_pgoff, which breaks the former. This patch fixes the problem by moving the vm_pgoff assignment to a function that is used only for GEM mmap path, so that the PRIME path retains the original offset. Cc: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by:
Ørjan Eide <orjan.eide@arm.com> Signed-off-by:
Tomasz Figa <tfiga@chromium.org> Signed-off-by:
Thierry Escande <thierry.escande@collabora.com> Tested-by:
Heiko Stuebner <heiko@sntech.de> Signed-off-by:
-
Haixia Shi authored
The prime fd to handle ioctl was not used with rockchip before. Support was added in order to pass graphics_Gbm and to support potential uses within Chrome OS (e.g. zero-copy video decode, camera). Signed-off-by:
Haixia Shi <hshi@chromium.org> Signed-off-by:
-
Tomasz Figa authored
This patch removes unused fields from vop structure. Signed-off-by:
-
