1. 12 May, 2014 19 commits
  2. 22 Apr, 2014 6 commits
    • Micky Ching's avatar
      mmc: rtsx: add R1-no-CRC mmc command type handle · 5027251e
      Micky Ching authored
      a27fbf2f ("mmc: add ignorance case for CMD13 CRC error") produced
      a cmd.flags unhandled in realtek pci host driver.  This will make MMC
      card fail to initialize, this patch is used to handle the new cmd.flags
      condition and MMC card can be used.
      Signed-off-by: default avatarMicky Ching <micky_ching@realsil.com.cn>
      Signed-off-by: default avatarUlf Hansson <ulf.hansson@linaro.org>
      Signed-off-by: default avatarChris Ball <chris@printf.net>
      5027251e
    • Ulf Hansson's avatar
      mmc: core: Invoke sdio func driver's PM callbacks from the sdio bus · 573185cc
      Ulf Hansson authored
      The sdio func device is added to the driver model after the card
      device.
      
      This means the sdio func device will be suspend before the card device
      and thus resumed after. The consequence are the mmc core don't
      explicity need to protect itself from receiving sdio requests in
      suspended state. Instead that can be handled from the sdio bus, which
      is thus invokes the PM callbacks instead of old dummy function.
      
      In the case were the sdio func driver don't implement the PM callbacks
      the mmc core will in the early phase of system suspend, remove the
      card from the driver model and thus power off it.
      
      Cc: Aaron Lu <aaron.lu@intel.com>
      Cc: NeilBrown <neilb@suse.de>
      Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
      Signed-off-by: default avatarUlf Hansson <ulf.hansson@linaro.org>
      Reviewed-by: default avatarAaron Lu <aaron.lu@intel.com>
      Tested-by: default avatarxiaoming wang <xiaoming.wang@intel.com>
      Tested-by: default avatarChuanxiao Dong <chuanxiao.dong@intel.com>
      Signed-off-by: default avatarChris Ball <chris@printf.net>
      573185cc
    • Stefan Wahren's avatar
      mmc: core: Use maximum timeout values in case TACC field is zero · f7bf11a3
      Stefan Wahren authored
      When plugging a specific micro SD card at MMC socket of a custom i.MX28 board,
      we get the following kernel warning:
      
      WARNING: CPU: 0 PID: 30 at drivers/mmc/host/mxs-mmc.c:342 mxs_mmc_start_cmd+0x34c/0x378()
      Modules linked in:
      CPU: 0 PID: 30 Comm: kworker/u2:1 Not tainted 3.14.0-rc5 #8
      Workqueue: kmmcd mmc_rescan
      [<c0015420>] (unwind_backtrace) from [<c0012cb0>] (show_stack+0x10/0x14)
      [<c0012cb0>] (show_stack) from [<c001daf8>] (warn_slowpath_common+0x6c/0x8c)
      [<c001daf8>] (warn_slowpath_common) from [<c001db34>] (warn_slowpath_null+0x1c/0x24)
      [<c001db34>] (warn_slowpath_null) from [<c0349478>] (mxs_mmc_start_cmd+0x34c/0x378)
      [<c0349478>] (mxs_mmc_start_cmd) from [<c0338fa0>] (mmc_start_request+0xc4/0xf4)
      [<c0338fa0>] (mmc_start_request) from [<c03390b4>] (mmc_wait_for_req+0x50/0x164)
      [<c03390b4>] (mmc_wait_for_req) from [<c03405b8>] (mmc_app_send_scr+0x158/0x1c8)
      [<c03405b8>] (mmc_app_send_scr) from [<c033ee1c>] (mmc_sd_setup_card+0x80/0x3c8)
      [<c033ee1c>] (mmc_sd_setup_card) from [<c033f788>] (mmc_sd_init_card+0x124/0x66c)
      [<c033f788>] (mmc_sd_init_card) from [<c033fd7c>] (mmc_attach_sd+0xac/0x174)
      [<c033fd7c>] (mmc_attach_sd) from [<c033a658>] (mmc_rescan+0x25c/0x2d8)
      [<c033a658>] (mmc_rescan) from [<c003597c>] (process_one_work+0x1b4/0x4ec)
      [<c003597c>] (process_one_work) from [<c0035de4>] (worker_thread+0x130/0x464)
      [<c0035de4>] (worker_thread) from [<c003c824>] (kthread+0xb4/0xd0)
      [<c003c824>] (kthread) from [<c000f420>] (ret_from_fork+0x14/0x34)
      
      The error is due to an invalid value in CSD register of a specific 2GB
      micro SD card. The CSD version of this card is 1.0 but the TACC field
      has the invalid value 0.
      
      cid:0000005553442020000000000000583f
      csd:00000032535a83bfedb7ffbf1680003f
      date:08/2005
      erase_size:512
      fwrev:0x0
      hwrev:0x0
      manfid:0x000000
      name:USD
      oemid:0x0000
      preferred_erase_size:4194304
      scr:0225000000000000
      serial:0x00000000
      type:SD
      
      Since the kernel is making use of this TACC field to calculate the SD
      card timeout, an invalid value 0 leads to a warning at
      mxs_ns_to_ssp_ticks() and later the following misleading error message
      appears in a loop:
      
      mxs-mmc 80010000.ssp: card claims to support voltages below defined range
      mxs-mmc 80010000.ssp: no support for card's volts
      mmc0: error -22 whilst initialising MMC card
      
      This error is only found on this 2GB SD card on mxs platform.
      On x86 this card works without any problems.
      
      The following patch based on the work of Peter Chan and Otavio Salvador.
      It catches the case that the determined timeout is still 0 and sets it
      to a valid value.
      
      Successful tested on a i.MX28 board.
      Signed-off-by: default avatarStefan Wahren <stefan.wahren@i2se.com>
      Signed-off-by: default avatarUlf Hansson <ulf.hansson@linaro.org>
      Signed-off-by: default avatarChris Ball <chris@printf.net>
      f7bf11a3
    • Axel Lin's avatar
      mmc: Convert to use ATTRIBUTE_GROUPS · d1e58212
      Axel Lin authored
      Use new ATTRIBUTE_GROUPS macro to declare attribute groups.
      Signed-off-by: default avatarAxel Lin <axel.lin@ingics.com>
      Signed-off-by: default avatarUlf Hansson <ulf.hansson@linaro.org>
      Signed-off-by: default avatarChris Ball <chris@printf.net>
      d1e58212
    • Fabio Estevam's avatar
      mmc: card.h: Use NULL instead of 0 for END_FIXUP · 297d4056
      Fabio Estevam authored
      Fix the following sparse warnings:
      
      drivers/mmc/card/block.c:2421:9: warning: Using plain integer as NULL pointer
      
      drivers/mmc/core/quirks.c:69:9: warning: Using plain integer as NULL pointer
      Signed-off-by: default avatarFabio Estevam <fabio.estevam@freescale.com>
      Signed-off-by: default avatarUlf Hansson <ulf.hansson@linaro.org>
      Signed-off-by: default avatarChris Ball <chris@printf.net>
      297d4056
    • Markus Mayer's avatar
      mmc: Delay the card_event callback into the mmc_rescan worker · fa372a51
      Markus Mayer authored
      This change removes the callback from atomic context which it doesn't
      need to be in, and puts it in line with the debounced rescan.
      
      This code is based on these e-mail threads with Christian Daudt:
      
        https://lkml.org/lkml/2013/8/19/539
        https://lkml.org/lkml/2014/3/19/79Signed-off-by: default avatarMarkus Mayer <markus.mayer@linaro.org>
      Signed-off-by: default avatarUlf Hansson <ulf.hansson@linaro.org>
      Signed-off-by: default avatarChris Ball <chris@printf.net>
      fa372a51
  3. 20 Apr, 2014 12 commits
  4. 19 Apr, 2014 3 commits