- 11 Dec, 2016 17 commits
-
-
Sebastian Sanchez authored
Use the standard driver wrapper for QP reference counters. This makes the code more maintainable. Fixes: Commit 4d6f85c3 ("IB/rdmavt, IB/qib, IB/hfi1: Use new QP put get routines") Reviewed-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by:
Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by:
Doug Ledford <dledford@redhat.com>
-
Sebastian Sanchez authored
Some parts of the code don't use the standard driver wrapper for memory region reference counters. Use the standard driver wrapper throughout the code. Reviewed-by:
-
Sebastian Sanchez authored
Some parts of the code don't use the standard release wrapper rvt_put_qp() for decrementing and testing the refcount to then try to use a resource. Replace this code with the standard driver wrapper. Fixes: Commit 4d6f85c3 ("IB/rdmavt, IB/qib, IB/hfi1: Use new QP put get routines") Reviewed-by:
-
Dean Luick authored
The driver should not change the external device request completed bit when not actually doing an external device request. Reviewed-by:
Easwar Hariharan <easwar.hariharan@intel.com> Signed-off-by:
Dean Luick <dean.luick@intel.com> Signed-off-by:
-
Sebastian Sanchez authored
In sc_buffer_alloc(), the sc->alloc_lock is released before calling sc_release_update(), and it is reacquired after the function call. This causes CPU lock trading. Fix it by not dropping the lock before calling sc_release_update(). Reviewed-by:
-
Mitko Haralanov authored
The s_cur_sge field in the qp structure holds a pointer to the SGE of the currently processed WQE. It assumes the protection of the RVT_S_BUSY flag to prevent the changing of this field while the send engine is using it. This scheme works as long as there is only one instance of the send engine running at a time. Scaling of the send engine to multiple cores would break this assumption as there could be multiple instances of the send engine running on different CPUs. This opens a window where the QP's RVT_S_BUSY flag is not set but the send engine is still running. To prevent accidental changing of the s_cur_sge pointer, the QP's dependence on it is removed. The SGE pointer is now stored in the verbs_txreq, which is a per-packet data structure. This ensures that each individual packet has it's own pointer, which is setup while the RVT_S_BUSY flag is set. Reviewed-by:
Mitko Haralanov <mitko.haralanov@intel.com> Signed-off-by:
-
Mike Marciniszyn authored
Add tracing of MR segment information. Reviewed-by:
-
Dean Luick authored
Low power QSFP AOC cables require a different SerDes Tx PLL bandwidth setting than the default. The 8051 firmware does not know the details, so the driver needs to tell the firmware through a special setting. Reviewed-by:
-
Tadeusz Struk authored
The struct hfi1_affinity is not used anymore. We use the struct hfi1_affinity_node and hfi1_affinity_node_list instead. Reviewed-by:
Tadeusz Struk <tadeusz.struk@intel.com> Signed-off-by:
-
Don Hiatt authored
The qp->s_cur_size field assumes that the S_BUSY bit protects the field from modification after the slock is dropped. Scaling the send engine to multiple cores would break that assumption. Correct the issue by carrying the payload size in the txreq structure. Reviewed-by:
Don Hiatt <don.hiatt@intel.com> Signed-off-by:
-
Jianxin Xiong authored
Previously tools like hfi1stats had to access these counters through debugfs, which often caused permission issue for non-root users. It is not always acceptable to change the debugfs mounting permission due to security concerns. When exposed under the IB stats interface, the counters are universally readable by default. Reviewed-by:
Ira Weiny <ira.weiny@intel.com> Signed-off-by:
Jianxin Xiong <jianxin.xiong@intel.com> Signed-off-by:
-
Dennis Dalessandro authored
Split rdmavt traces into separate files to preserve the original hierarchy since only one trace sub system may now be defined per header file. Reviewed-by:
-
Jakub Pawlak authored
For the received packets with payload less or equal 8DWS RxDmaDataFifoRdUncErr is not reported. There is set RHF.EccErr if the header is not suppressed. When such packet is detected on the send side the header suppression mechanism is disabled by clearing SH bit in the packet header. Reviewed-by:
Jakub Pawlak <jakub.pawlak@intel.com> Signed-off-by:
-
Dean Luick authored
Both the 8051 memory and LCB register access require multiple steps and coordination with the driver. This cannot be safely done with resource0 alone. The 8051 memory is exported read-only. LCB is exported read/write. Reviewed-by:
-
Sebastian Sanchez authored
qp->r_aflags is already protected by qp->r_lock, therefore, test_and_clear_bit() doesn't need to be atomic. Profile shows this function call is costly. Change the test_and_clear_bit() call to use the non-atomic variant. Reviewed-by:
-
Dean Luick authored
When reading multiple dc8051 data memory locations at once, the read enabled field must be toggled at every address change. Do that by writing only the address first, then writing the enable. Reviewed-by:
-
Dean Luick authored
Add the ability to read the new EPROM format. Reviewed-by:
-
- 15 Nov, 2016 10 commits
-
-
Sebastian Sanchez authored
Both pio_buf and send_context structs have oversized fields and have cachelines that can be optimized. Reduce oversized fields for both structs. Make sure pio_buf struct fits within a cacheline. Move read-only fields to their own cacheline in send_context struct. All of this will avoid cacheline trading as the ring progresses and pio buffers/send contexts are used. Reviewed-by:
-
Sebastian Sanchez authored
The div instruction shows costly in profiles. Reviewed-by:
-
Easwar Hariharan authored
Use scratch registers within the HFI1 device to recover signal integrity information that is then used to tune the channel. While there, update error messages to better convey the result of falling back to a backup file. Reviewed-by:
-
Sebastian Sanchez authored
Profiling shows hot path struct members that need to be in a minimum set of cachelines. Group these struct member in the same cacheline: sc2vl_lock sc2vl rhf_rcv_function_map rcv_limit rhf_offset Group these struct member in the same cacheline: process_pio_send process_dma_send pport rcd int_counter flags num_pports first_user_ctxt Fill holes in struct hfi1_devdata revealed by pahole. Reviewed-by:
-
Jakub Pawlak authored
This patch consolidates the node GUIDs and the port GUID handling and unifies access to these items. The knowledge of hfi1 GUIDs' design and their location are kept in accessors to centralize access. Reviewed-by:
Brian Welty <brian.welty@intel.com> Signed-off-by:
-
Mike Marciniszyn authored
Move buffers_allocated pcpu pointer to allocator line. Move hw_free pointer to releaser line. Fill other holes revealed by pahole. Reviewed-by:
-
Mike Marciniszyn authored
Save a cacheline by having hot path calldowns together. Reviewed-by:
-
Mike Marciniszyn authored
Profiling shows that the key validation is susceptible to cache line trading when accessing the lkey table. Fix by separating out the read mostly fields from the write fields. In addition the shift amount, which is function of the lkey table size, is precomputed and stored with the table pointer. Since both the shift and table pointer are in the same read mostly cacheline, this saves a cache line in this hot path. Reviewed-by:
-
Mike Marciniszyn authored
Short circuit sdma_txclean() by adding an __sdma_txclean() that is only called when the tx has sdma mappings. Convert internal calls to __sdma_txclean(). This removes a call from the critical path. Reviewed-by:
-
Mike Marciniszyn authored
Profiling suggests that the read_seqbegin() in the txreq put logic is colliding with other uses of the iowait lock. The packet at a time use of this lock dictates a unique lock to avoid reader/writer collisions when the number of vTxWait events is low. In order to support a unique lock the iowait struct embedded in the QP is extended to remember the lock that protects the queue head. The QP destroy removes that QP from any wait list. It doesn't need to know the head because of the linked list API, but it does need to know the lock required to protect the head. This also opens up the wait logic to have unique per resources locks which needs to be in future refinement. Reviewed-by:
-
- 29 Oct, 2016 13 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 bugfix from Thomas Gleixner: "A single bugfix for the recent changes related to registering the boot cpu when this has not happened before prefill_possible_map(). The main problem with this change got fixed already, but we missed the case where the local APIC is not yet mapped, when prefill_possible_map() is invoked, so the registration of the boot cpu which has the APIC bit set in CPUID will explode. I should have seen that issue earlier, but all I can do now is feeling embarassed" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/smpboot: Init apic mapping before usage
-
git://git.infradead.org/linux-ubifsLinus Torvalds authored
Pull ubi/ubifs fixes from Richard Weinberger: "This contains fixes for issues in both UBI and UBIFS: - A regression wrt overlayfs, introduced in -rc2. - An UBI issue, found by Dan Carpenter's static checker" * tag 'upstream-4.9-rc3' of git://git.infradead.org/linux-ubifs: ubifs: Fix regression in ubifs_readdir() ubi: fastmap: Fix add_vol() return value test in ubi_attach_fastmap()
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC fixes from Olof Johansson: "We haven't seen a whole lot of fixes for the first two weeks since the merge window, but here is the batch that we have at the moment. Nothing sticks out as particularly bad or scary, it's mostly a handful of smaller fixes to several platforms. The Uniphier reset controller changes could probably have been delayed to 4.10, but they're not scary and just plumbing up driver changes that went in during the merge window. We're also adding another maintainer to Marvell Berlin platforms, to help out when Sebastian is too busy. Yay teamwork!" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: imx: mach-imx6q: Fix the PHY ID mask for AR8031 ARM: dts: vf610: fix IRQ flag of global timer ARM: imx: gpc: Fix the imx_gpc_genpd_init() error path ARM: imx: gpc: Initialize all power domains arm64: dts: Updated NAND DT properties for NS2 SVK arm64: dts: uniphier: change MIO node to SD control node ARM: dts: uniphier: change MIO node to SD control node reset: uniphier: rename MIO reset to SD reset for Pro5, PXs2, LD20 SoCs arm64: uniphier: select ARCH_HAS_RESET_CONTROLLER ARM: uniphier: select ARCH_HAS_RESET_CONTROLLER arm64: dts: Add timer erratum property for LS2080A and LS1043A arm64: dts: rockchip: remove the abuse of keep-power-in-suspend ARM: multi_v7_defconfig: Enable Intel e1000e driver MAINTAINERS: add myself as Marvell berlin SoC maintainer bus: qcom-ebi2: depend on ARCH_QCOM or COMPILE_TEST ARM: dts: fix the SD card on the Snowball arm64: dts: rockchip: remove always-on and boot-on from vcc_sd arm64: dts: marvell: fix clocksource for CP110 master SPI0 ARM: mvebu: Select corediv clk for all mvebu v7 SoC
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull char/misc driver fixes from Greg KH: "Here are a few small char/misc driver fixes for reported issues. The "biggest" are two binder fixes for reported issues that have been shipping in Android phones for a while now, the others are various fixes for reported problems. And there's a MAINTAINERS update for good measure. All have been in linux-next with no reported issues" * tag 'char-misc-4.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: MAINTAINERS: Add entry for genwqe driver VMCI: Doorbell create and destroy fixes GenWQE: Fix bad page access during abort of resource allocation vme: vme_get_size potentially returning incorrect value on failure extcon: qcom-spmi-misc: Sync the extcon state on interrupt hv: do not lose pending heartbeat vmbus packets mei: txe: don't clean an unprocessed interrupt cause. ANDROID: binder: Clear binder and cookie when setting handle in flat binder struct ANDROID: binder: Add strong ref checks
-
Olof Johansson authored
Merge tag 'v4.9-rockchip-dts64-fixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into fixes Correct regulator handling on Rockchip arm64 boards to make bind/unbind calls work correctly and remove a sdio-only property from non-sdio mmc hosts, that accidentially was added there. * tag 'v4.9-rockchip-dts64-fixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: dts: rockchip: remove the abuse of keep-power-in-suspend arm64: dts: rockchip: remove always-on and boot-on from vcc_sd Signed-off-by:
Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'arm-soc/for-4.9/devicetree-arm64-fixes' of http://github.com/Broadcom/stblinux into fixes This pull request contains a single fix for Broadcom ARM64-based SoCs: - Ray adds the required bus width and OOB sector size properties to the Northstar 2 SVK reference board in order for the NAND controller to work properly * tag 'arm-soc/for-4.9/devicetree-arm64-fixes' of http://github.com/Broadcom/stblinux: arm64: dts: Updated NAND DT properties for NS2 SVK Signed-off-by:
-
Olof Johansson authored
Merge tag 'imx-fixes-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes The i.MX fixes for 4.9: - A couple of patches from Fabio to fix the GPC power domain regression which is caused by PM Domain core change 0159ec67 ("PM / Domains: Verify the PM domain is present when adding a provider"), and a related kernel crash seen with multi_v7_defconfig build. - Correct the PHY ID mask for AR8031 to match phy driver code. - Apply new added timer erratum A008585 for LS1043A and LS2080A SoC. - Correct vf610 global timer IRQ flag to avoid warning from gic driver after commit 992345a5 ("irqchip/gic: WARN if setting the interrupt type for a PPI fails"). * tag 'imx-fixes-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: imx: mach-imx6q: Fix the PHY ID mask for AR8031 ARM: dts: vf610: fix IRQ flag of global timer ARM: imx: gpc: Fix the imx_gpc_genpd_init() error path ARM: imx: gpc: Initialize all power domains arm64: dts: Add timer erratum property for LS2080A and LS1043A Signed-off-by:
-
Olof Johansson authored
Merge tag 'uniphier-fixes-v4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier into fixes UniPhier ARM SoC fixes for v4.9 - Add "select ARCH_HAS_RESET_CONTROLLER" in Kconfig - Rename wrongly-named mioctrl to sdctrl * tag 'uniphier-fixes-v4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier: arm64: dts: uniphier: change MIO node to SD control node ARM: dts: uniphier: change MIO node to SD control node reset: uniphier: rename MIO reset to SD reset for Pro5, PXs2, LD20 SoCs arm64: uniphier: select ARCH_HAS_RESET_CONTROLLER ARM: uniphier: select ARCH_HAS_RESET_CONTROLLER Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-coreLinus Torvalds authored
Pull driver core fixes from Greg KH: "Here are two small driver core / kernfs fixes for 4.9-rc3. One makes the Kconfig entry for DEBUG_TEST_DRIVER_REMOVE a bit more explicit that this is a crazy thing to enable for a distro kernel (thanks for trying Fedora!), the other resolves an issue with vim opening kernfs files (sysfs, configfs, etc.) Both have been in linux-next with no reported issues" * tag 'driver-core-4.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: driver core: Make Kconfig text for DEBUG_TEST_DRIVER_REMOVE stronger kernfs: Add noop_fsync to supported kernfs_file_fops
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging and IIO driver fixes from Greg KH: "Here are some small staging and iio driver fixes for reported issues for 4.9-rc3. Nothing major, the "largest" being a lustre fix for a sysfs file that was obviously wrong, and had never been tested, so it was moved to debugfs as that is where it belongs. The others are small bug fixes for reported issues with various staging or iio drivers. All have been in linux-next for a while with no reported issues" * tag 'staging-4.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: greybus: fix a leak on error in gb_module_create() greybus: es2: fix error return code in ap_probe() greybus: arche-platform: Add missing of_node_put() in arche_platform_change_state() staging: android: ion: Fix error handling in ion_query_heaps() iio: accel: sca3000_core: avoid potentially uninitialized variable iio:chemical:atlas-ph-sensor: Fix use of 32 bit int to hold 16 bit big endian value staging/lustre/llite: Move unstable_stats from sysfs to debugfs Staging: wilc1000: Fix kernel Oops on opening the device staging: android/ion: testing the wrong variable Staging: greybus: uart: Use gbphy_dev->dev instead of bundle->dev Staging: greybus: gpio: Use gbphy_dev->dev instead of bundle->dev iio: adc: ti-adc081c: Select IIO_TRIGGERED_BUFFER to prevent build errors iio: maxim_thermocouple: Align 16 bit big endian value of raw reads
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Pull tty/serial driver fixes from Greg KH: "Here are a number of small tty and serial driver fixes for reported issues for 4.9-rc3. Nothing major, but they do resolve a bunch of problems with the tty core changes that are in 4.9-rc1, and finally the atmel serial driver is back working properly. All have been in linux-next with no reported issues" * tag 'tty-4.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty: serial_core: fix NULL struct tty pointer access in uart_write_wakeup tty: serial_core: Fix serial console crash on port shutdown tty/serial: at91: fix hardware handshake on Atmel platforms vt: clear selection before resizing sc16is7xx: always write state when configuring GPIO as an output sh-sci: document R8A7743/5 support tty: serial: 8250: 8250_core: NXP SC16C2552 workaround tty: limit terminal size to 4M chars tty: serial: fsl_lpuart: Fix Tx DMA edge case serial: 8250_lpss: enable MSI for sure serial: core: fix console problems on uart_close serial: 8250_uniphier: fix clearing divisor latch access bit serial: 8250_uniphier: fix more unterminated string serial: pch_uart: add terminate entry for dmi_system_id tables devicetree: bindings: uart: Add new compatible string for ZynqMP serial: xuartps: Add new compatible string for ZynqMP serial: SERIAL_STM32 should depend on HAS_DMA serial: stm32: Fix comparisons with undefined register tty: vt, fix bogus division in csi_J
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB fixes from Greg KH: "Here are a number of small USB driver fixes for 4.9-rc3. There is the usual number of gadget and xhci patches in here to resolved reported issues, as well as some usb-serial driver fixes and new device ids. All have been in linux-next with no reported issues" * tag 'usb-4.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (26 commits) usb: chipidea: host: fix NULL ptr dereference during shutdown usb: renesas_usbhs: add wait after initialization for R-Car Gen3 usb: increase ohci watchdog delay to 275 msec usb: musb: Call pm_runtime from musb_gadget_queue usb: musb: Fix hardirq-safe hardirq-unsafe lock order error usb: ehci-platform: increase EHCI_MAX_RSTS to 4 usb: ohci-at91: Set RemoteWakeupConnected bit explicitly. USB: serial: fix potential NULL-dereference at probe xhci: use default USB_RESUME_TIMEOUT when resuming ports. xhci: workaround for hosts missing CAS bit xhci: add restart quirk for Intel Wildcatpoint PCH USB: serial: cp210x: fix tiocmget error handling wusb: fix error return code in wusb_prf() Revert "Documentation: devicetree: dwc2: Deprecate g-tx-fifo-size" Revert "usb: dwc2: gadget: fix TX FIFO size and address initialization" Revert "usb: dwc2: gadget: change variable name to more meaningful" USB: serial: ftdi_sio: add support for Infineon TriBoard TC2X7 wusb: Stop using the stack for sg crypto scratch space usb: dwc3: Fix size used in dma_free_coherent() usb: gadget: f_fs: stop sleeping in ffs_func_eps_disable ...
-
