- 29 Oct, 2010 33 commits
-
-
Florian Fainelli authored
Add support for Titan TNETV1050,1055,1056,1060 variants. This SoC is almost completely identical to AR7 except on a few points: - a second bank of gpios is available - vlynq0 on titan is vlynq1 on ar7 - different PHY addresses for cpmac0 This SoC can be found on commercial products like the Linksys WRTP54G Original patch by Xin with improvments by Florian. Signed-off-by:
Xin Zhen <xlonestar2000@aim.com> Signed-off-by:
Florian Fainelli <florian@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/1563/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> ---
-
Florian Fainelli authored
In order to detect the Titan variant, we must initialize GPIOs earlier since detection relies on some GPIO values to be set. Signed-off-by:
-
David Daney authored
Declare that OCTEON reference boards have both OHCI and EHCI. Add platform devices for the corresponding hardware. Signed-off-by:
David Daney <ddaney@caviumnetworks.com> To: linux-usb@vger.kernel.org To: dbrownell@users.sourceforge.net Patchwork: http://patchwork.linux-mips.org/patch/1676/Acked-by:
Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by:
-
David Daney authored
The OCTEON II SOC has USB EHCI and OHCI controllers connected directly to the internal I/O bus. This patch adds the necessary 'glue' logic to allow ehci-hcd and ohci-hcd drivers to work on OCTEON II. The OCTEON normally runs big-endian, and the ehci/ohci internal registers have host endianness, so we need to select USB_EHCI_BIG_ENDIAN_MMIO. The ehci and ohci blocks share a common clocking and PHY infrastructure. Initialization of the host controller and PHY clocks is common between the two and is factored out into the octeon2-common.c file. Setting of USB_ARCH_HAS_OHCI and USB_ARCH_HAS_EHCI is done in arch/mips/Kconfig in a following patch. Signed-off-by:
-
David Daney authored
The EHCI and OHCI blocks connection to the I/O bus is controlled by these registers. Signed-off-by:
-
David Daney authored
The CN63XXP1 needs a couple of workarounds to ensure memory is not written in unexpected ways. All PREF with hints in the range 0-4,6-24 are replaced with PREF 28. We pass a flag to the assembler to cover compiler generated code, and patch uasm for the dynamically generated code. The write buffer threshold is reduced to 4. Signed-off-by:
-
David Daney authored
The creation of the I/O clock domain requires some adjustments. Since the watchdog counters are clocked by the I/O clock, use its rate for timing calculations. Signed-off-by:
Wim Van Sebroeck <wim@iguana.be> Signed-off-by:
-
David Daney authored
The creation of the I/O clock domain requires some adjustments. Since the CF bus timing logic is clocked by the I/O clock, use its rate for delay calculations. Signed-off-by:
Jeff Garzik <jgarzik@redhat.com> Signed-off-by:
-
David Daney authored
The I2C and UARTS are clocked by the I/O clock, use its rate for these devices. Signed-off-by:
-
David Daney authored
Starting with cn63xx Octeon I/O blocks are clocked at a different rate than the CPU. Add a new function octeon_get_io_clock_rate() that yields the I/O clock rate. Also rearrange octeon_get_clock_rate() to get the value from the saved sysinfo structure. Signed-off-by:
-
David Daney authored
We can run with any simulator clock rate. Get rid of the code overriding it to 6MHz. Signed-off-by:
-
David Daney authored
The per-CPU clocks are synchronized from IPD_CLK_COUNT, on cn63XX it must be scaled by the clock frequency ratio. Signed-off-by:
-
David Daney authored
Signed-off-by:
-
David Daney authored
The OCTEON II ISA extends the original OCTEON ISA, so give it its own __elf_platform string so optimized libraries can be selected in userspace. Signed-off-by:
-
David Daney authored
Signed-off-by:
-
David Daney authored
Signed-off-by:
-
David Daney authored
The CN63XX has a different L2 cache architecture. Update the helper functions to reflect this. Some joining of split lines was also done to improve readability, as well as reformatting of comments. Signed-off-by:
-
David Daney authored
Signed-off-by:
-
David Daney authored
The CN63XX is a new 6-CPU SOC based on the new OCTEON II CPU cores. Join some lines back together. This makes some of them exceed 80 columns, but they are uninteresting and this unclutters things. Signed-off-by:
-
David Daney authored
All Octeon chips can support more than 4GB of RAM. Also due to how Octeon PCI is setup, even some configurations with less than 4GB of RAM will have portions that are not accessible from 32-bit devices. Enable the swiotlb code to handle the cases where a device cannot directly do DMA. This is a complete rewrite of the Octeon DMA mapping code. Signed-off-by:
-
David Daney authored
This allows platforms that are using the swiotlb to initialize it. Signed-off-by:
-
David Daney authored
Use asm-generic/dma-mapping-common.h to handle all DMA mapping operations and establish a default get_dma_ops() that forwards all operations to the existing code. Augment dev_archdata to carry a pointer to the struct dma_map_ops, allowing DMA operations to be overridden on a per device basis. Currently this is never filled in, so the default dma_map_ops are used. A follow-on patch sets this for Octeon PCI devices. Also initialize the dma_debug system as it is now used if it is configured. Includes fixes by Kevin Cernekee <cernekee@gmail.com>. Signed-off-by:
-
David Daney authored
Any function defined in a header file should be inline. This helps us avoid 'unused' compiler warnings when we include the files in more places in subsequent patches. Signed-off-by:
-
David Daney authored
Give us a nice place to allocate coherent DMA memory for 32-bit devices. Signed-off-by:
-
David Daney authored
On OCTEON, we reserve the last 256MB of 32-bit PCI address space, mapping the RAM in this region at a high DMA address. This makes memory in this region unavailable for 32-bit DMA. Signed-off-by:
-
David Daney authored
DMA mapping may reduce the usable physical address range usable for 32-bit DMA. Signed-off-by:
-
David Daney authored
This allows follow-on patches to dma mapping functions to work with the octeon mgmt device.. Signed-off-by:
-
From: jiang.adam@gmail.com authored
Add stackoverflow detection to mips arch Signed-off-by:
Adam Jiang <jiang.adam@gmail.com> Cc: dmitri.vorobiev@movial.com Cc: wuzhangjin@gmail.com Cc: ddaney@caviumnetworks.com Cc: peterz@infradead.org Cc: fweisbec@gmail.com Cc: tj@kernel.org Cc: tglx@linutronix.de Cc: mingo@elte.hu Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/1559/ Patchwork: https://patchwork.linux-mips.org/patch/1651/Signed-off-by:
-
Thomas Gleixner authored
arch/mips/Kconfig already sets GENERIC_HARDIRQS_NO__DO_IRQ unconditionally. Remove the redundant select from the Loongson Kconfig. Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Ralf Baechle authored
All callers were passing in 1 anyway. Signed-off-by: -
Ralf Baechle authored
Signed-off-by: -
Ralf Baechle authored
It was a nice optimization - on paper at least. In practice it results in branches that may exceed the maximum legal range for a branch. We can fight that problem with -ffunction-sections but -ffunction-sections again is incompatible with -pg used by the function tracer. By rewriting the loop around all simple LL/SC blocks to C we reduce the amount of inline assembler and at the same time allow GCC to often fill the branch delay slots with something sensible or whatever else clever optimization it may have up in its sleeve. With this optimization gone we also no longer need -ffunction-sections, so drop it. This optimization was originally introduced in 2.6.21, commit 5999eca25c1fd4b9b9aca7833b04d10fe4bc877d (linux-mips.org) rsp. f65e4fa8 (kernel.org). Original fix for the issues which caused me to pull this optimization by Paul Gortmaker <paul.gortmaker@windriver.com>. Signed-off-by:
-
Linus Torvalds authored
Merge branch 'stable/xen-pcifront-0.8.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen and branch 'for-linus' of git://xenbits.xen.org/people/sstabellini/linux-pvhvm * 'for-linus' of git://xenbits.xen.org/people/sstabellini/linux-pvhvm: xen: register xen pci notifier xen: initialize cpu masks for pv guests in xen_smp_init xen: add a missing #include to arch/x86/pci/xen.c xen: mask the MTRR feature from the cpuid xen: make hvc_xen console work for dom0. xen: add the direct mapping area for ISA bus access xen: Initialize xenbus for dom0. xen: use vcpu_ops to setup cpu masks xen: map a dummy page for local apic and ioapic in xen_set_fixmap xen: remap MSIs into pirqs when running as initial domain xen: remap GSIs as pirqs when running as initial domain xen: introduce XEN_DOM0 as a silent option xen: map MSIs into pirqs xen: support GSI -> pirq remapping in PV on HVM guests xen: add xen hvm acpi_register_gsi variant acpi: use indirect call to register gsi in different modes xen: implement xen_hvm_register_pirq xen: get the maximum number of pirqs from xen xen: support pirq != irq * 'stable/xen-pcifront-0.8.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: (27 commits) X86/PCI: Remove the dependency on isapnp_disable. xen: Update Makefile with CONFIG_BLOCK dependency for biomerge.c MAINTAINERS: Add myself to the Xen Hypervisor Interface and remove Chris Wright. x86: xen: Sanitse irq handling (part two) swiotlb-xen: On x86-32 builts, select SWIOTLB instead of depending on it. MAINTAINERS: Add myself for Xen PCI and Xen SWIOTLB maintainer. xen/pci: Request ACS when Xen-SWIOTLB is activated. xen-pcifront: Xen PCI frontend driver. xenbus: prevent warnings on unhandled enumeration values xenbus: Xen paravirtualised PCI hotplug support. xen/x86/PCI: Add support for the Xen PCI subsystem x86: Introduce x86_msi_ops msi: Introduce default_[teardown|setup]_msi_irqs with fallback. x86/PCI: Export pci_walk_bus function. x86/PCI: make sure _PAGE_IOMAP it set on pci mappings x86/PCI: Clean up pci_cache_line_size xen: fix shared irq device passthrough xen: Provide a variant of xen_poll_irq with timeout. xen: Find an unbound irq number in reverse order (high to low). xen: statically initialize cpu_evtchn_mask_p ... Fix up trivial conflicts in drivers/pci/Makefile
-
- 28 Oct, 2010 7 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6Linus Torvalds authored
* 'packaging' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6: scripts/package: don't break if %{_smp_mflags} isn't set kbuild, deb-pkg: Check if KBUILD_IMAGE exists before copying it
-
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6Linus Torvalds authored
* 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6: (39 commits) Revert "namespace: add source file location exceptions" Coccinelle: Add contextual message Coccinelle: Fix documentation Coccinelle: Find doubled arguments to boolean or bit operators. Coccinelle: Find nested lock+irqsave functions that use the same flags variables. namespace: add source file location exceptions scripts/extract-ikconfig: add support for bzip2, lzma and lzo kbuild: check return value of asprintf() scripts/namespace.pl: improve to get more correct results scripts/namespace.pl: some bug fixes scripts/namespace.pl: update file exclusion list scripts/namespace.pl: fix wrong source path Coccinelle: Use the -no_show_diff option for org and report mode Coccinelle: Add a new mode named 'chain' Coccinelle: Use new comment format to explain kfree.cocci Coccinelle: Improve user information with a new kind of comment Coccinelle: Update documentation MAINTAINERS: Coccinelle: Update email address Documentation/kbuild: modules.txt cleanup Documentation/kbuild: major edit of modules.txt sections 5-8 ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6Linus Torvalds authored
* 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6: (38 commits) kbuild: convert `arch/tile' to the kconfig mainmenu upgrade README: cite nconfig Revert "kconfig: Temporarily disable dependency warnings" kconfig: Use PATH_MAX instead of 128 for path buffer sizes. kconfig: Fix realloc usage() kconfig: Propagate const kconfig: Don't go out from read config loop when you read new symbol kconfig: fix menuconfig on debian lenny kbuild: migrate all arch to the kconfig mainmenu upgrade kconfig: expand file names kconfig: use the file's name of sourced file kconfig: constify file name kconfig: don't emit warning upon rootmenu's prompt redefinition kconfig: replace KERNELVERSION usage by the mainmenu's prompt kconfig: delay gconf window initialization kconfig: expand by default the rootmenu's prompt kconfig: add a symbol string expansion helper kconfig: regen parser kconfig: implement the `mainmenu' directive kconfig: allow PACKAGE to be defined on the compiler's command-line ... Fix up trivial conflict in arch/mn10300/Kconfig
-
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6Linus Torvalds authored
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (73 commits) power: Revert "power_supply: Mark twl4030_charger as broken" mfd: Fix a memory leak when unload mc13xxx-core module mfd: Fix resource reclaim for max8998 mfd: Remove unneeded ret value checking for max8998 register updates mfd: Add free max8998->ono irq in max8998_irq_exit() mfd: Fix resource reclaim in pcf50633_remove() omap4: pandaboard: fix up mmc card detect logic mfd: Fix ezx_pcap_probe error path mfd: Fix off-by-one value range checking for tps6507x mfd: Remove __devinitdata from tc6393xb_mmc_resources mfd: Add WM831x SPI support mfd: Factor out WM831x I2C I/O from the core driver mfd: Remove DEBUG defines from mc13xxx-core mfd: Fix jz4740_adc_set_enabled mfd: Add TPS658621C device ID mfd: Fix twl-irq function declaration warnings regulator: max8998 BUCK1/2 voltage change with use of GPIOs mfd: Voltages and GPIOs platform_data definitions for max8998 regulator: max8998 BUCK1/2 internal voltages and indexes defined mfd: Support for ICs compliant with max8998 ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdogLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: watchdog: iTCO_wdt.c: remove extra pci_dev_put()'s from init code watchdog: add support for Broadcom BCM63xx built-in watchdog watchdog: f71808e_wdt: add support for the F71889FG watchdog: MachZ: fix debug macro watchdog: it8712f_wdt: Add module parameter for alternative reset sources watchdog: it8712f_wdt: Add comments for config/control register names watchdog: it87_wdt: Add support for watchdogs with 8b timers watchdog: it87_wdt: Add support for IT8720F watchdog watchdog: Use static const char * const where possible watchdog: iTCO_wdt: Cleanup warning messages watchdog: iTCO_wdt: TCO Watchdog patch for Intel Patsburg DeviceIDs
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: BUG_ON fix: check if page has buffers before calling page_buffers()
-
Prarit Bhargava authored
The iTCO_wdt driver erroneously releases the pci_dev, and causes PCI hotremove to fail because of an incorrect usage count. The probe for this driver does a for_each_pci_dev() which gets a reference for a pci_dev when iTCO_wdt_init() is successful. The for_each_pci_dev() loop puts a reference for a pci_dev when iTCO_wdt_init() fails, so the iTCO_wdt_init() does not need to do any pci_dev_put()'s. The only pci_dev_put() that is required is in the iTCO_wdt_cleanup() function. Signed-off-by:
Prarit Bhargava <prarit@redhat.com> Signed-off-by:
-
