1. 26 Jan, 2017 4 commits
  2. 19 Jan, 2017 1 commit
  3. 18 Jan, 2017 6 commits
  4. 17 Jan, 2017 10 commits
    • Linus Torvalds's avatar
      Merge tag 'modules-for-v4.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux · 0aa0313f
      Linus Torvalds authored
      Pull modules fix from Jessica Yu:
      
       - fix out-of-tree module breakage when it supplies its own definitions
         of true and false
      
      * tag 'modules-for-v4.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
        taint/module: Fix problems when out-of-kernel driver defines true or false
      0aa0313f
    • Larry Finger's avatar
      taint/module: Fix problems when out-of-kernel driver defines true or false · 5eb7c0d0
      Larry Finger authored
      Commit 7fd8329b ("taint/module: Clean up global and module taint
      flags handling") used the key words true and false as character members
      of a new struct. These names cause problems when out-of-kernel modules
      such as VirtualBox include their own definitions of true and false.
      
      Fixes: 7fd8329b ("taint/module: Clean up global and module taint flags handling")
      Signed-off-by: default avatarLarry Finger <Larry.Finger@lwfinger.net>
      Cc: Petr Mladek <pmladek@suse.com>
      Cc: Jessica Yu <jeyu@redhat.com>
      Cc: Rusty Russell <rusty@rustcorp.com.au>
      Reported-by: default avatarValdis Kletnieks <Valdis.Kletnieks@vt.edu>
      Reviewed-by: default avatarPetr Mladek <pmladek@suse.com>
      Acked-by: default avatarRusty Russell <rusty@rustcorp.com.au>
      Signed-off-by: default avatarJessica Yu <jeyu@redhat.com>
      5eb7c0d0
    • Linus Torvalds's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net · 4b19a9e2
      Linus Torvalds authored
      Pull networking fixes from David Miller:
      
       1) Handle multicast packets properly in fast-RX path of mac80211, from
          Johannes Berg.
      
       2) Because of a logic bug, the user can't actually force SW
          checksumming on r8152 devices. This makes diagnosis of hw
          checksumming bugs really annoying. Fix from Hayes Wang.
      
       3) VXLAN route lookup does not take the source and destination ports
          into account, which means IPSEC policies cannot be matched properly.
          Fix from Martynas Pumputis.
      
       4) Do proper RCU locking in netvsc callbacks, from Stephen Hemminger.
      
       5) Fix SKB leaks in mlxsw driver, from Arkadi Sharshevsky.
      
       6) If lwtunnel_fill_encap() fails, we do not abort the netlink message
          construction properly in fib_dump_info(), from David Ahern.
      
       7) Do not use kernel stack for DMA buffers in atusb driver, from Stefan
          Schmidt.
      
       8) Openvswitch conntack actions need to maintain a correct checksum,
          fix from Lance Richardson.
      
       9) ax25_disconnect() is missing a check for ax25->sk being NULL, in
          fact it already checks this, but not in all of the necessary spots.
          Fix from Basil Gunn.
      
      10) Action GET operations in the packet scheduler can erroneously bump
          the reference count of the entry, making it unreleasable. Fix from
          Jamal Hadi Salim. Jamal gives a great set of example command lines
          that trigger this in the commit message.
      
      * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (46 commits)
        net sched actions: fix refcnt when GETing of action after bind
        net/mlx4_core: Eliminate warning messages for SRQ_LIMIT under SRIOV
        net/mlx4_core: Fix when to save some qp context flags for dynamic VST to VGT transitions
        net/mlx4_core: Fix racy CQ (Completion Queue) free
        net: stmmac: don't use netdev_[dbg, info, ..] before net_device is registered
        net/mlx5e: Fix a -Wmaybe-uninitialized warning
        ax25: Fix segfault after sock connection timeout
        bpf: rework prog_digest into prog_tag
        tipc: allocate user memory with GFP_KERNEL flag
        net: phy: dp83867: allow RGMII_TXID/RGMII_RXID interface types
        ip6_tunnel: Account for tunnel header in tunnel MTU
        mld: do not remove mld souce list info when set link down
        be2net: fix MAC addr setting on privileged BE3 VFs
        be2net: don't delete MAC on close on unprivileged BE3 VFs
        be2net: fix status check in be_cmd_pmac_add()
        cpmac: remove hopeless #warning
        ravb: do not use zero-length alignment DMA descriptor
        mlx4: do not call napi_schedule() without care
        openvswitch: maintain correct checksum state in conntrack actions
        tcp: fix tcp_fastopen unaligned access complaints on sparc
        ...
      4b19a9e2
    • Linus Torvalds's avatar
      Merge branch 'stable/for-linus-4.10' of... · 203f80f1
      Linus Torvalds authored
      Merge branch 'stable/for-linus-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb
      
      Pull swiotlb fix from Konrad Rzeszutek Wilk:
       "A tiny fix to make sure that page-sized mappings are page-aligned (and
        not say straddle two pages). This is important for some drivers (such
        as NVME)"
      
      * 'stable/for-linus-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb:
        swiotlb: ensure that page-sized mappings are page-aligned
      203f80f1
    • Linus Torvalds's avatar
      Merge tag 'mmc-v4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc · 7e84b303
      Linus Torvalds authored
      Pull MMC fixes from Ulf Hansson:
       "MMC core:
         - fix regressions detecting HS/HS DDR eMMC cards related to CMD6
      
        MMC host:
         - mmc: mxs-mmc: Fix additional cycles after transmission stop
         - sdhci-acpi: Only powered up enabled acpi child devices
         - meson: avoid possible NULL dereference"
      
      * tag 'mmc-v4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
        mmc: core: Restore parts of the polling policy when switch to HS/HS DDR
        mmc: mxs-mmc: Fix additional cycles after transmission stop
        mmc: sdhci-acpi: Only powered up enabled acpi child devices
        MMC: meson: avoid possible NULL dereference
      7e84b303
    • Linus Torvalds's avatar
      Merge tag 'for-linus-20170116' of git://git.infradead.org/linux-mtd · 7d8b8c09
      Linus Torvalds authored
      Pull MTD fixes from Brian Norris:
       "Just NAND updates from Boris:
      
         - avoid compiling xway NAND controller driver as a module (which
           didn't work)
      
         - fix tango NAND DT binding and make sure the controller is in a
           clean state at probe time
      
         - add dependency on HAS_IOMEM to the oxnas NAND driver
      
         - fix irq number validity check in the lpc32xx driver"
      
      * tag 'for-linus-20170116' of git://git.infradead.org/linux-mtd:
        mtd: nand: lpc32xx: fix invalid error handling of a requested irq
        mtd: nand: tango: Reset pbus to raw mode in probe
        mtd: nand: tango: Update DT binding description
        mtd: nand: oxnas_nand: fix build errors on arch/um, require HAS_IOMEM
        mtd: nand: xway: fix build because of module functions
        mtd: nand: xway: disable module support
      7d8b8c09
    • Ingo Molnar's avatar
      Merge tag 'perf-urgent-for-mingo-4.10-20170117' of... · 31f5260a
      Ingo Molnar authored
      Merge tag 'perf-urgent-for-mingo-4.10-20170117' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
      
      Pull 'perf probe' fixes from Arnaldo Carvalho de Melo <acme@redhat.com>
      
        - Show correct locations for 'perf probe' on modules (Masami Hiramatsu)
      
        - Correctly handle 'perf probe's on GCC generated functions in modules (Masami Hiramatsu)
      Signed-off-by: default avatarArnaldo Carvalho de Melo <acme@redhat.com>
      Signed-off-by: default avatarIngo Molnar <mingo@kernel.org>
      31f5260a
    • Zhou Chengming's avatar
      perf/x86/intel: Handle exclusive threadid correctly on CPU hotplug · 4e71de79
      Zhou Chengming authored
      The CPU hotplug function intel_pmu_cpu_starting() sets
      cpu_hw_events.excl_thread_id unconditionally to 1 when the shared exclusive
      counters data structure is already availabe for the sibling thread.
      
      This works during the boot process because the first sibling gets threadid
      0 assigned and the second sibling which shares the data structure gets 1.
      
      But when the first thread of the core is offlined and onlined again it
      shares the data structure with the second thread and gets exclusive thread
      id 1 assigned as well.
      
      Prevent this by checking the threadid of the already online thread.
      
      [ tglx: Rewrote changelog ]
      Signed-off-by: default avatarZhou Chengming <zhouchengming1@huawei.com>
      Cc: NuoHan Qiao <qiaonuohan@huawei.com>
      Cc: ak@linux.intel.com
      Cc: peterz@infradead.org
      Cc: kan.liang@intel.com
      Cc: dave.hansen@linux.intel.com
      Cc: eranian@google.com
      Cc: qiaonuohan@huawei.com
      Cc: davidcc@google.com
      Cc: guohanjun@huawei.com
      Link: http://lkml.kernel.org/r/1484536871-3131-1-git-send-email-zhouchengming1@huawei.comSigned-off-by: default avatarThomas Gleixner <tglx@linutronix.de>
      ---					---
       arch/x86/events/intel/core.c |    7 +++++--
       1 file changed, 5 insertions(+), 2 deletions(-)
      4e71de79
    • Joonyoung Shim's avatar
      clocksource/exynos_mct: Clear interrupt when cpu is shut down · bc7c36ee
      Joonyoung Shim authored
      When a CPU goes offline a potentially pending timer interrupt is not
      cleared. When the CPU comes online again then the pending interrupt is
      delivered before the per cpu clockevent device is initialized. As a
      consequence the tick interrupt handler dereferences a NULL pointer.
      
      [   51.251378] Unable to handle kernel NULL pointer dereference at virtual address 00000040
      [   51.289348] task: ee942d00 task.stack: ee960000
      [   51.293861] PC is at tick_periodic+0x38/0xb0
      [   51.298102] LR is at tick_handle_periodic+0x1c/0x90
      
      Clear the pending interrupt in the cpu dying path.
      
      Fixes: 56a94f13 ("clocksource: exynos_mct: Avoid blocking calls in the cpu hotplug notifier")
      Reported-by: default avatarSeung-Woo Kim <sw0312.kim@samsung.com>
      Signed-off-by: default avatarJoonyoung Shim <jy0922.shim@samsung.com>
      Cc: linux-samsung-soc@vger.kernel.org
      Cc: cw00.choi@samsung.com
      Cc: daniel.lezcano@linaro.org
      Cc: stable@vger.kernel.org
      Cc: javier@osg.samsung.com
      Cc: kgene@kernel.org
      Cc: krzk@kernel.org
      Cc: linux-arm-kernel@lists.infradead.org
      Link: http://lkml.kernel.org/r/1484628876-22065-1-git-send-email-jy0922.shim@samsung.comSigned-off-by: default avatarThomas Gleixner <tglx@linutronix.de>
      bc7c36ee
    • Jamal Hadi Salim's avatar
      net sched actions: fix refcnt when GETing of action after bind · 0faa9cb5
      Jamal Hadi Salim authored
      Demonstrating the issue:
      
      .. add a drop action
      $sudo $TC actions add action drop index 10
      
      .. retrieve it
      $ sudo $TC -s actions get action gact index 10
      
      	action order 1: gact action drop
      	 random type none pass val 0
      	 index 10 ref 2 bind 0 installed 29 sec used 29 sec
       	Action statistics:
      	Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
      	backlog 0b 0p requeues 0
      
      ... bug 1 above: reference is two.
          Reference is actually 1 but we forget to subtract 1.
      
      ... do a GET again and we see the same issue
          try a few times and nothing changes
      ~$ sudo $TC -s actions get action gact index 10
      
      	action order 1: gact action drop
      	 random type none pass val 0
      	 index 10 ref 2 bind 0 installed 31 sec used 31 sec
       	Action statistics:
      	Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
      	backlog 0b 0p requeues 0
      
      ... lets try to bind the action to a filter..
      $ sudo $TC qdisc add dev lo ingress
      $ sudo $TC filter add dev lo parent ffff: protocol ip prio 1 \
        u32 match ip dst 127.0.0.1/32 flowid 1:1 action gact index 10
      
      ... and now a few GETs:
      $ sudo $TC -s actions get action gact index 10
      
      	action order 1: gact action drop
      	 random type none pass val 0
      	 index 10 ref 3 bind 1 installed 204 sec used 204 sec
       	Action statistics:
      	Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
      	backlog 0b 0p requeues 0
      
      $ sudo $TC -s actions get action gact index 10
      
      	action order 1: gact action drop
      	 random type none pass val 0
      	 index 10 ref 4 bind 1 installed 206 sec used 206 sec
       	Action statistics:
      	Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
      	backlog 0b 0p requeues 0
      
      $ sudo $TC -s actions get action gact index 10
      
      	action order 1: gact action drop
      	 random type none pass val 0
      	 index 10 ref 5 bind 1 installed 235 sec used 235 sec
       	Action statistics:
      	Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
      	backlog 0b 0p requeues 0
      
      .... as can be observed the reference count keeps going up.
      
      After the fix
      
      $ sudo $TC actions add action drop index 10
      $ sudo $TC -s actions get action gact index 10
      
      	action order 1: gact action drop
      	 random type none pass val 0
      	 index 10 ref 1 bind 0 installed 4 sec used 4 sec
       	Action statistics:
      	Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
      	backlog 0b 0p requeues 0
      
      $ sudo $TC -s actions get action gact index 10
      
      	action order 1: gact action drop
      	 random type none pass val 0
      	 index 10 ref 1 bind 0 installed 6 sec used 6 sec
       	Action statistics:
      	Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
      	backlog 0b 0p requeues 0
      
      $ sudo $TC qdisc add dev lo ingress
      $ sudo $TC filter add dev lo parent ffff: protocol ip prio 1 \
        u32 match ip dst 127.0.0.1/32 flowid 1:1 action gact index 10
      
      $ sudo $TC -s actions get action gact index 10
      
      	action order 1: gact action drop
      	 random type none pass val 0
      	 index 10 ref 2 bind 1 installed 32 sec used 32 sec
       	Action statistics:
      	Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
      	backlog 0b 0p requeues 0
      
      $ sudo $TC -s actions get action gact index 10
      
      	action order 1: gact action drop
      	 random type none pass val 0
      	 index 10 ref 2 bind 1 installed 33 sec used 33 sec
       	Action statistics:
      	Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
      	backlog 0b 0p requeues 0
      
      Fixes: aecc5cef ("net sched actions: fix GETing actions")
      Signed-off-by: default avatarJamal Hadi Salim <jhs@mojatatu.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      0faa9cb5
  5. 16 Jan, 2017 19 commits
    • Linus Torvalds's avatar
      Merge tag 'nfs-for-4.10-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs · 5cf7a0f3
      Linus Torvalds authored
      Pull NFS client bugfixes from Trond Myklebust:
      
       - fix invalid fget()/fput() calls when doing file locking
      
       - fix multiple directory cache invalidation issues due to the client
         failing to recognise that the directory wasn't changed
      
       - fix client recovery when server reboots multiple times
      
      * tag 'nfs-for-4.10-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
        NFSv4: Fix client recovery when server reboots multiple times
        NFSv4: update_changeattr should update the attribute timestamp
        NFSv4: Don't call update_changeattr() unless the unlink is successful
        NFSv4: Don't apply change_info4 twice on rename within a directory
        NFSv4: Call update_changeattr() from _nfs4_proc_open only if a file was created
        nfs: Don't take a reference on fl->fl_file for LOCK operation
      5cf7a0f3
    • David S. Miller's avatar
      Merge branch 'mlx4-core-fixes' · 617125e7
      David S. Miller authored
      Tariq Toukan says:
      
      ====================
      mlx4 core fixes
      
      This patchset contains bug fixes from Jack to the mlx4 Core driver.
      
      Patch 1 solves a race in the flow of CQ free.
      Patch 2 moves some qp context flags update to the correct qp transition.
      Patch 3 eliminates warnings from the path of SRQ_LIMIT that flood the message log,
      and keeps them only in the path of SRQ_CATAS_ERROR.
      
      Series generated against net commit:
      1a717fcf Merge tag 'mac80211-for-davem-2017-01-13' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      617125e7
    • Jack Morgenstein's avatar
      net/mlx4_core: Eliminate warning messages for SRQ_LIMIT under SRIOV · 9577b174
      Jack Morgenstein authored
      When running SRIOV, warnings for SRQ LIMIT events flood the Hypervisor's
      message log when (correct, normally operating) apps use SRQ LIMIT events
      as a trigger to post WQEs to SRQs.
      
      Add more information to the existing debug printout for SRQ_LIMIT, and
      output the warning messages only for the SRQ CATAS ERROR event.
      
      Fixes: acba2420 ("mlx4_core: Add wrapper functions and comm channel and slave event support to EQs")
      Fixes: e0debf9c ("mlx4_core: Reduce warning message for SRQ_LIMIT event to debug level")
      Signed-off-by: default avatarJack Morgenstein <jackm@dev.mellanox.co.il>
      Signed-off-by: default avatarTariq Toukan <tariqt@mellanox.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      9577b174
    • Jack Morgenstein's avatar
      net/mlx4_core: Fix when to save some qp context flags for dynamic VST to VGT transitions · 7c3945bc
      Jack Morgenstein authored
      Save the qp context flags byte containing the flag disabling vlan stripping
      in the RESET to INIT qp transition, rather than in the INIT to RTR
      transition. Per the firmware spec, the flags in this byte are active
      in the RESET to INIT transition.
      
      As a result of saving the flags in the incorrect qp transition, when
      switching dynamically from VGT to VST and back to VGT, the vlan
      remained stripped (as is required for VST) and did not return to
      not-stripped (as is required for VGT).
      
      Fixes: f0f829bf ("net/mlx4_core: Add immediate activate for VGT->VST->VGT")
      Signed-off-by: default avatarJack Morgenstein <jackm@dev.mellanox.co.il>
      Signed-off-by: default avatarTariq Toukan <tariqt@mellanox.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      7c3945bc
    • Jack Morgenstein's avatar
      net/mlx4_core: Fix racy CQ (Completion Queue) free · 291c566a
      Jack Morgenstein authored
      In function mlx4_cq_completion() and mlx4_cq_event(), the
      radix_tree_lookup requires a rcu_read_lock.
      This is mandatory: if another core frees the CQ, it could
      run the radix_tree_node_rcu_free() call_rcu() callback while
      its being used by the radix tree lookup function.
      
      Additionally, in function mlx4_cq_event(), since we are adding
      the rcu lock around the radix-tree lookup, we no longer need to take
      the spinlock. Also, the synchronize_irq() call for the async event
      eliminates the need for incrementing the cq reference count in
      mlx4_cq_event().
      
      Other changes:
      1. In function mlx4_cq_free(), replace spin_lock_irq with spin_lock:
         we no longer take this spinlock in the interrupt context.
         The spinlock here, therefore, simply protects against different
         threads simultaneously invoking mlx4_cq_free() for different cq's.
      
      2. In function mlx4_cq_free(), we move the radix tree delete to before
         the synchronize_irq() calls. This guarantees that we will not
         access this cq during any subsequent interrupts, and therefore can
         safely free the CQ after the synchronize_irq calls. The rcu_read_lock
         in the interrupt handlers only needs to protect against corrupting the
         radix tree; the interrupt handlers may access the cq outside the
         rcu_read_lock due to the synchronize_irq calls which protect against
         premature freeing of the cq.
      
      3. In function mlx4_cq_event(), we change the mlx_warn message to mlx4_dbg.
      
      4. We leave the cq reference count mechanism in place, because it is
         still needed for the cq completion tasklet mechanism.
      
      Fixes: 6d90aa5c ("net/mlx4_core: Make sure there are no pending async events when freeing CQ")
      Fixes: 225c7b1f ("IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters")
      Signed-off-by: default avatarJack Morgenstein <jackm@dev.mellanox.co.il>
      Signed-off-by: default avatarMatan Barak <matanb@mellanox.com>
      Signed-off-by: default avatarTariq Toukan <tariqt@mellanox.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      291c566a
    • Heiner Kallweit's avatar
      net: stmmac: don't use netdev_[dbg, info, ..] before net_device is registered · b618ab45
      Heiner Kallweit authored
      Don't use netdev_info and friends before the net_device is registered.
      This avoids ugly messages like
      "meson8b-dwmac c9410000.ethernet (unnamed net_device) (uninitialized):
      Enable RX Mitigation via HW Watchdog Timer"
      Signed-off-by: default avatarHeiner Kallweit <hkallweit1@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      b618ab45
    • Arnd Bergmann's avatar
      net/mlx5e: Fix a -Wmaybe-uninitialized warning · abeffce9
      Arnd Bergmann authored
      As found by Olof's build bot, we gain a harmless warning about a
      potential uninitialized variable reference in mlx5:
      
      drivers/net/ethernet/mellanox/mlx5/core/en_tc.c: In function 'parse_tc_fdb_actions':
      drivers/net/ethernet/mellanox/mlx5/core/en_tc.c:769:13: warning: 'out_dev' may be used uninitialized in this function [-Wmaybe-uninitialized]
      drivers/net/ethernet/mellanox/mlx5/core/en_tc.c:811:21: note: 'out_dev' was declared here
      
      This was introduced through the addition of an 'IS_ERR/PTR_ERR' pair
      that gcc is unfortunately unable to completely figure out.
      
      The problem being gcc cannot tell that if(IS_ERR()) in
      mlx5e_route_lookup_ipv4() is equivalent to checking if(err) later,
      so it assumes that 'out_dev' is used after the 'return PTR_ERR(rt)'.
      
      The PTR_ERR_OR_ZERO() case by comparison is fairly easy to detect
      by gcc, so it can't get that wrong, so it no longer warns.
      
      Hadar Hen Zion already attempted to fix the warning earlier by adding fake
      initializations, but that ended up not fully addressing all warnings, so
      I'm reverting it now that it is no longer needed.
      
      Link: http://arm-soc.lixom.net/buildlogs/mainline/v4.10-rc3-98-gcff3b2c/
      Fixes: a42485eb ("net/mlx5e: TC ipv4 tunnel encap offload error flow fixes")
      Fixes: a757d108 ("net/mlx5e: Fix kbuild warnings for uninitialized parameters")
      Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      Signed-off-by: default avatarOr Gerlitz <ogerlitz@mellanox.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      abeffce9
    • Basil Gunn's avatar
      ax25: Fix segfault after sock connection timeout · 8a367e74
      Basil Gunn authored
      The ax.25 socket connection timed out & the sock struct has been
      previously taken down ie. sock struct is now a NULL pointer. Checking
      the sock_flag causes the segfault.  Check if the socket struct pointer
      is NULL before checking sock_flag. This segfault is seen in
      timed out netrom connections.
      
      Please submit to -stable.
      Signed-off-by: default avatarBasil Gunn <basil@pacabunga.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      8a367e74
    • Daniel Borkmann's avatar
      bpf: rework prog_digest into prog_tag · f1f7714e
      Daniel Borkmann authored
      Commit 7bd509e3 ("bpf: add prog_digest and expose it via
      fdinfo/netlink") was recently discussed, partially due to
      admittedly suboptimal name of "prog_digest" in combination
      with sha1 hash usage, thus inevitably and rightfully concerns
      about its security in terms of collision resistance were
      raised with regards to use-cases.
      
      The intended use cases are for debugging resp. introspection
      only for providing a stable "tag" over the instruction sequence
      that both kernel and user space can calculate independently.
      It's not usable at all for making a security relevant decision.
      So collisions where two different instruction sequences generate
      the same tag can happen, but ideally at a rather low rate. The
      "tag" will be dumped in hex and is short enough to introspect
      in tracepoints or kallsyms output along with other data such
      as stack trace, etc. Thus, this patch performs a rename into
      prog_tag and truncates the tag to a short output (64 bits) to
      make it obvious it's not collision-free.
      
      Should in future a hash or facility be needed with a security
      relevant focus, then we can think about requirements, constraints,
      etc that would fit to that situation. For now, rework the exposed
      parts for the current use cases as long as nothing has been
      released yet. Tested on x86_64 and s390x.
      
      Fixes: 7bd509e3 ("bpf: add prog_digest and expose it via fdinfo/netlink")
      Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
      Acked-by: default avatarAlexei Starovoitov <ast@kernel.org>
      Cc: Andy Lutomirski <luto@kernel.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f1f7714e
    • Masami Hiramatsu's avatar
      perf probe: Fix to probe on gcc generated functions in modules · 613f050d
      Masami Hiramatsu authored
      Fix to probe on gcc generated functions on modules. Since
      probing on a module is based on its symbol name, it should
      be adjusted on actual symbols.
      
      E.g. without this fix, perf probe shows probe definition
      on non-exist symbol as below.
      
        $ perf probe -m build-x86_64/net/netfilter/nf_nat.ko -F in_range*
        in_range.isra.12
        $ perf probe -m build-x86_64/net/netfilter/nf_nat.ko -D in_range
        p:probe/in_range nf_nat:in_range+0
      
      With this fix, perf probe correctly shows a probe on
      gcc-generated symbol.
      
        $ perf probe -m build-x86_64/net/netfilter/nf_nat.ko -D in_range
        p:probe/in_range nf_nat:in_range.isra.12+0
      
      This also fixes same problem on online module as below.
      
        $ perf probe -m i915 -D assert_plane
        p:probe/assert_plane i915:assert_plane.constprop.134+0
      Signed-off-by: default avatarMasami Hiramatsu <mhiramat@kernel.org>
      Tested-by: default avatarArnaldo Carvalho de Melo <acme@redhat.com>
      Cc: Jiri Olsa <jolsa@redhat.com>
      Cc: Namhyung Kim <namhyung@kernel.org>
      Cc: Peter Zijlstra <peterz@infradead.org>
      Link: http://lkml.kernel.org/r/148411450673.9978.14905987549651656075.stgit@devboxSigned-off-by: default avatarArnaldo Carvalho de Melo <acme@redhat.com>
      613f050d
    • Masami Hiramatsu's avatar
      perf probe: Add error checks to offline probe post-processing · 3e96dac7
      Masami Hiramatsu authored
      Add error check codes on post processing and improve it for offline
      probe events as:
      
       - post processing fails if no matched symbol found in map(-ENOENT)
         or strdup() failed(-ENOMEM).
      
       - Even if the symbol name is the same, it updates symbol address
         and offset.
      Signed-off-by: default avatarMasami Hiramatsu <mhiramat@kernel.org>
      Cc: Jiri Olsa <jolsa@redhat.com>
      Cc: Namhyung Kim <namhyung@kernel.org>
      Cc: Peter Zijlstra <peterz@infradead.org>
      Link: http://lkml.kernel.org/r/148411443738.9978.4617979132625405545.stgit@devboxSigned-off-by: default avatarArnaldo Carvalho de Melo <acme@redhat.com>
      3e96dac7
    • Parthasarathy Bhuvaragan's avatar
      tipc: allocate user memory with GFP_KERNEL flag · 57d5f64d
      Parthasarathy Bhuvaragan authored
      Until now, we allocate memory always with GFP_ATOMIC flag.
      When the system is under memory pressure and a user tries to send,
      the send fails due to low memory. However, the user application
      can wait for free memory if we allocate it using GFP_KERNEL flag.
      
      In this commit, we use allocate memory with GFP_KERNEL for all user
      allocation.
      Reported-by: default avatarRune Torgersen <runet@innovsys.com>
      Acked-by: default avatarJon Maloy <jon.maloy@ericsson.com>
      Signed-off-by: default avatarParthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      57d5f64d
    • Karicheri, Muralidharan's avatar
      net: phy: dp83867: allow RGMII_TXID/RGMII_RXID interface types · 34c55cf2
      Karicheri, Muralidharan authored
      Currently dp83867 driver returns error if phy interface type
      PHY_INTERFACE_MODE_RGMII_RXID is used to set the rx only internal
      delay. Similarly issue happens for PHY_INTERFACE_MODE_RGMII_TXID.
      Fix this by checking also the interface type if a particular delay
      value is missing in the phy dt bindings. Also update the DT document
      accordingly.
      Signed-off-by: default avatarMurali Karicheri <m-karicheri2@ti.com>
      Signed-off-by: default avatarSekhar Nori <nsekhar@ti.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      34c55cf2
    • Jakub Sitnicki's avatar
      ip6_tunnel: Account for tunnel header in tunnel MTU · 02ca0423
      Jakub Sitnicki authored
      With ip6gre we have a tunnel header which also makes the tunnel MTU
      smaller. We need to reserve room for it. Previously we were using up
      space reserved for the Tunnel Encapsulation Limit option
      header (RFC 2473).
      
      Also, after commit b05229f4 ("gre6: Cleanup GREv6 transmit path,
      call common GRE functions") our contract with the caller has
      changed. Now we check if the packet length exceeds the tunnel MTU after
      the tunnel header has been pushed, unlike before.
      
      This is reflected in the check where we look at the packet length minus
      the size of the tunnel header, which is already accounted for in tunnel
      MTU.
      
      Fixes: b05229f4 ("gre6: Cleanup GREv6 transmit path, call common GRE functions")
      Signed-off-by: default avatarJakub Sitnicki <jkbs@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      02ca0423
    • Masami Hiramatsu's avatar
      perf probe: Fix to show correct locations for events on modules · d2d4edbe
      Masami Hiramatsu authored
      Fix to show correct locations for events on modules by relocating given
      address instead of retrying after failure.
      
      This happens when the module text size is big enough, bigger than
      sh_addr, because the original code retries with given address + sh_addr
      if it failed to find CU DIE at the given address.
      
      Any address smaller than sh_addr always fails and it retries with the
      correct address, but addresses bigger than sh_addr will get a CU DIE
      which is on the given address (not adjusted by sh_addr).
      
      In my environment(x86-64), the sh_addr of ".text" section is 0x10030.
      Since i915 is a huge kernel module, we can see this issue as below.
      
        $ grep "[Tt] .*\[i915\]" /proc/kallsyms | sort | head -n1
        ffffffffc0270000 t i915_switcheroo_can_switch	[i915]
      
      ffffffffc0270000 + 0x10030 = ffffffffc0280030, so we'll check
      symbols cross this boundary.
      
        $ grep "[Tt] .*\[i915\]" /proc/kallsyms | grep -B1 ^ffffffffc028\
        | head -n 2
        ffffffffc027ff80 t haswell_init_clock_gating	[i915]
        ffffffffc0280110 t valleyview_init_clock_gating	[i915]
      
      So setup probes on both function and see what happen.
      
        $ sudo ./perf probe -m i915 -a haswell_init_clock_gating \
              -a valleyview_init_clock_gating
        Added new events:
          probe:haswell_init_clock_gating (on haswell_init_clock_gating in i915)
          probe:valleyview_init_clock_gating (on valleyview_init_clock_gating in i915)
      
        You can now use it in all perf tools, such as:
      
        	perf record -e probe:valleyview_init_clock_gating -aR sleep 1
      
        $ sudo ./perf probe -l
          probe:haswell_init_clock_gating (on haswell_init_clock_gating@gpu/drm/i915/intel_pm.c in i915)
          probe:valleyview_init_clock_gating (on i915_vga_set_decode:4@gpu/drm/i915/i915_drv.c in i915)
      
      As you can see, haswell_init_clock_gating is correctly shown,
      but valleyview_init_clock_gating is not.
      
      With this patch, both events are shown correctly.
      
        $ sudo ./perf probe -l
          probe:haswell_init_clock_gating (on haswell_init_clock_gating@gpu/drm/i915/intel_pm.c in i915)
          probe:valleyview_init_clock_gating (on valleyview_init_clock_gating@gpu/drm/i915/intel_pm.c in i915)
      
      Committer notes:
      
      In my case:
      
        # perf probe -m i915 -a haswell_init_clock_gating -a valleyview_init_clock_gating
        Added new events:
          probe:haswell_init_clock_gating (on haswell_init_clock_gating in i915)
          probe:valleyview_init_clock_gating (on valleyview_init_clock_gating in i915)
      
        You can now use it in all perf tools, such as:
      
      	  perf record -e probe:valleyview_init_clock_gating -aR sleep 1
      
        # perf probe -l
          probe:haswell_init_clock_gating (on i915_getparam+432@gpu/drm/i915/i915_drv.c in i915)
          probe:valleyview_init_clock_gating (on __i915_printk+240@gpu/drm/i915/i915_drv.c in i915)
        #
      
        # readelf -SW /lib/modules/4.9.0+/build/vmlinux | egrep -w '.text|Name'
         [Nr] Name   Type      Address          Off    Size   ES Flg Lk Inf Al
         [ 1] .text  PROGBITS  ffffffff81000000 200000 822fd3 00  AX  0   0 4096
        #
      
        So both are b0rked, now with the fix:
      
        # perf probe -m i915 -a haswell_init_clock_gating -a valleyview_init_clock_gating
        Added new events:
          probe:haswell_init_clock_gating (on haswell_init_clock_gating in i915)
          probe:valleyview_init_clock_gating (on valleyview_init_clock_gating in i915)
      
        You can now use it in all perf tools, such as:
      
      	perf record -e probe:valleyview_init_clock_gating -aR sleep 1
      
        # perf probe -l
          probe:haswell_init_clock_gating (on haswell_init_clock_gating@gpu/drm/i915/intel_pm.c in i915)
          probe:valleyview_init_clock_gating (on valleyview_init_clock_gating@gpu/drm/i915/intel_pm.c in i915)
        #
      
      Both looks correct.
      Signed-off-by: default avatarMasami Hiramatsu <mhiramat@kernel.org>
      Tested-by: default avatarArnaldo Carvalho de Melo <acme@redhat.com>
      Cc: Jiri Olsa <jolsa@redhat.com>
      Cc: Namhyung Kim <namhyung@kernel.org>
      Cc: Peter Zijlstra <peterz@infradead.org>
      Link: http://lkml.kernel.org/r/148411436777.9978.1440275861947194930.stgit@devboxSigned-off-by: default avatarArnaldo Carvalho de Melo <acme@redhat.com>
      d2d4edbe
    • Hangbin Liu's avatar
      mld: do not remove mld souce list info when set link down · 1666d49e
      Hangbin Liu authored
      This is an IPv6 version of commit 24803f38 ("igmp: do not remove igmp
      souce list..."). In mld_del_delrec(), we will restore back all source filter
      info instead of flush them.
      
      Move mld_clear_delrec() from ipv6_mc_down() to ipv6_mc_destroy_dev() since
      we should not remove source list info when set link down. Remove
      igmp6_group_dropped() in ipv6_mc_destroy_dev() since we have called it in
      ipv6_mc_down().
      
      Also clear all source info after igmp6_group_dropped() instead of in it
      because ipv6_mc_down() will call igmp6_group_dropped().
      Signed-off-by: default avatarHangbin Liu <liuhangbin@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      1666d49e
    • Linus Torvalds's avatar
      Merge tag 'nfsd-4.10-1' of git://linux-nfs.org/~bfields/linux · 2eabb8b8
      Linus Torvalds authored
      Pull nfsd fixes from Bruce Fields:
       "Miscellaneous nfsd bugfixes, one for a 4.10 regression, three for
        older bugs"
      
      * tag 'nfsd-4.10-1' of git://linux-nfs.org/~bfields/linux:
        svcrdma: avoid duplicate dma unmapping during error recovery
        sunrpc: don't call sleeping functions from the notifier block callbacks
        svcrpc: don't leak contexts on PROC_DESTROY
        nfsd: fix supported attributes for acl & labels
      2eabb8b8
    • Linus Walleij's avatar
      ARM: 8613/1: Fix the uaccess crash on PB11MPCore · 90f92c63
      Linus Walleij authored
      The following patch was sketched by Russell in response to my
      crashes on the PB11MPCore after the patch for software-based
      priviledged no access support for ARMv8.1. See this thread:
      http://marc.info/?l=linux-arm-kernel&m=144051749807214&w=2
      
      I am unsure what is going on, I suspect everyone involved in
      the discussion is. I just want to repost this to get the
      discussion restarted, as I still have to apply this patch
      with every kernel iteration to get my PB11MPCore Realview
      running.
      
      Testing by Neil Armstrong on the Oxnas NAS has revealed that
      this bug exist also on that widely deployed hardware, so
      we are probably currently regressing all ARM11MPCore systems.
      
      Cc: Russell King <linux@armlinux.org.uk>
      Cc: Will Deacon <will.deacon@arm.com>
      Fixes: a5e090ac ("ARM: software-based priviledged-no-access support")
      Tested-by: default avatarNeil Armstrong <narmstrong@baylibre.com>
      Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
      Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
      90f92c63
    • Ivan Vecera's avatar
      be2net: fix MAC addr setting on privileged BE3 VFs · 34393529
      Ivan Vecera authored
      During interface opening MAC address stored in netdev->dev_addr is
      programmed in the HW with exception of BE3 VFs where the initial
      MAC is programmed by parent PF. This is OK when MAC address is not
      changed when an interfaces is down. In this case the requested MAC is
      stored to netdev->dev_addr and later is stored into HW during opening.
      But this is not done for all BE3 VFs so the NIC HW does not know
      anything about this change and all traffic is filtered.
      
      This is the case of bonding if fail_over_mac == 0 where the MACs of
      the slaves are changed while they are down.
      
      The be2net behavior is too restrictive because if a BE3 VF has
      the FILTMGMT privilege then it is able to modify its MAC without
      any restriction.
      
      To solve the described problem the driver should take care about these
      privileged BE3 VFs so the MAC is programmed during opening. And by
      contrast unpriviled BE3 VFs should not be allowed to change its MAC
      in any case.
      
      Cc: Sathya Perla <sathya.perla@broadcom.com>
      Cc: Ajit Khaparde <ajit.khaparde@broadcom.com>
      Cc: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
      Cc: Somnath Kotur <somnath.kotur@broadcom.com>
      Signed-off-by: default avatarIvan Vecera <cera@cera.cz>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      34393529