This reverts commit 4e4a9eb9 ("mm/rmap.c: reuse mergeable
anon_vma as parent when fork").

In dup_mmap(), anon_vma_fork() is called for attaching anon_vma and
parameter 'tmp' (i.e., the new vma of child) has same ->vm_next and
->vm_prev as its parent vma.  That causes the anon_vma used by parent been
mistakenly shared by child (In anon_vma_clone(), the code added by that
commit will do this reuse work).

Besides this issue, the design of reusing anon_vma from vma which has gone
through fork should be avoided ([1]).  So, this patch reverts that commit
and maintains the consistent logic of reusing anon_vma for
fork/split/merge vma.

Reusing anon_vma within the process is fine.  But if a vma has gone
through fork(), then that vma's anon_vma should not be shared with its
neighbor vma.  As explained in [1], when vma gone through fork(), the
check for list_is_singular(vma->anon_vma_chain) will be false, and
don't share anon_vma.

With current issue, one example can clarify more.  Parent process do
below two steps:

1. p_vma_1 is created and p_anon_vma_1 is prepared;

2. p_vma_2 is created and share p_anon_vma_1; (this is allowed,
   becaues p_vma_1 didn't gothrough fork()); parent process do fork():

3. c_vma_1 is dup from p_vma_1, and has its own c_anon_vma_1
   prepared; at this point, c_vma_1->anon_vma_chain has two items, one
   for p_anon_vma_1 and one for c_anon_vma_1;

4. c_vma_2 is dup from p_vma_2, it is not allowed to share
   c_anon_vma_1, because

c_vma_1->anon_vma_chain has two items.
[1] commit d0e9fe17 ("Simplify and comment on anon_vma re-use for
    anon_vma_prepare()") explains the test of "list_is_singular()".

Fixes: 4e4a9eb9 ("mm/rmap.c: reuse mergeable anon_vma as parent when fork")
Signed-off-by: Li Xinhai <lixinhai.lxh@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Rik van Riel <riel@redhat.com>
Link: http://lkml.kernel.org/r/1581150928-3214-3-git-send-email-lixinhai.lxh@gmail.comSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Patch series "mm: Fix misuse of parent anon_vma in dup_mmap path".

This patchset fixes the misuse of parenet anon_vma, which mainly caused by
child vma's vm_next and vm_prev are left same as its parent after
duplicate vma.  Finally, code reached parent vma's neighbor by referring
pointer of child vma and executed wrong logic.

The first two patches fix relevant issues, and the third patch sets
vm_next and vm_prev to NULL when duplicate vma to prevent potential misuse
in future.

Effects of the first bug is that causes rmap code to check both parent and
child's page table, although a page couldn't be mapped by both parent and
child, because child vma has WIPEONFORK so all pages mapped by child are
'new' and not relevant to parent.

Effects of the second bug is that the relationship of anon_vma of parent
and child are totallyconvoluted.  It would cause 'son', 'grandson', ...,
etc, to share 'parent' anon_vma, which disobey the design rule of reusing
anon_vma (the rule to be followed is that reusing should among vma of same
process, and vma should not gone through fork).

So, both issues should cause unnecessary rmap walking and have unexpected
complexity.

These two issues would not be directly visible, I used debugging code to
check the anon_vma pointers of parent and child when inspecting the
suspicious implementation of issue #2, then find the problem.

This patch (of 3):

In dup_mmap(), anon_vma_prepare() is called for vma has VM_WIPEONFORK, and
parameter 'tmp' (i.e., the new vma of child) has same ->vm_next and
->vm_prev as its parent vma.  That allows anon_vma used by parent been
mistakenly shared by child (find_mergeable_anon_vma() will do this reuse
work).

Besides this issue, call anon_vma_prepare() should be avoided because we
don't copy page for this vma.  Preparing anon_vma will be handled during
fault.

Fixes: d2cd9ede ("mm,fork: introduce MADV_WIPEONFORK")
Signed-off-by: Li Xinhai <lixinhai.lxh@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Link: http://lkml.kernel.org/r/1581150928-3214-2-git-send-email-lixinhai.lxh@gmail.comSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The root of the hierarchy cannot have high set, so we will never reclaim
based on it.  This makes that clearer and avoids another entry.
Signed-off-by: Chris Down <chris@chrisdown.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Michal Hocko <mhocko@kernel.org>
Link: http://lkml.kernel.org/r/20200312164137.GA1753625@chrisdown.nameSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull more ACPI updates from Rafael Wysocki:
 "Additional ACPI updates.

  These update the ACPICA code in the kernel to the 20200326 upstream
  revision, fix an ACPI-related CPU hotplug deadlock on x86, update
  Intel Tiger Lake device IDs in some places, add a new ACPI backlight
  blacklist entry, update the "acpi_backlight" kernel command line
  switch documentation and clean up a CPPC library routine.

  Specifics:

   - Update the ACPICA code in the kernel to upstream revision 20200326
     including:
      * Fix for a typo in a comment field (Bob Moore)
      * acpiExec namespace init file fixes (Bob Moore)
      * Addition of NHLT to the known tables list (Cezary Rojewski)
      * Conversion of PlatformCommChannel ASL keyword to PCC (Erik
        Kaneda)
      * acpiexec cleanup (Erik Kaneda)
      * WSMT-related typo fix (Erik Kaneda)
      * sprintf() utility function fix (John Levon)
      * IVRS IVHD type 11h parsing implementation (Michał Żygowski)
      * IVRS IVHD type 10h reserved field name fix (Michał Żygowski)

   - Fix ACPI-related CPU hotplug deadlock on x86 (Qian Cai)

   - Fix Intel Tiger Lake ACPI device IDs in several places (Gayatri
     Kammela)

   - Add ACPI backlight blacklist entry for Acer Aspire 5783z (Hans de
     Goede)

   - Fix documentation of the "acpi_backlight" kernel command line
     switch (Randy Dunlap)

   - Clean up the acpi_get_psd_map() CPPC library routine (Liguang
     Zhang)"

* tag 'acpi-5.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  x86: ACPI: fix CPU hotplug deadlock
  thermal: int340x_thermal: fix: Update Tiger Lake ACPI device IDs
  platform/x86: intel-hid: fix: Update Tiger Lake ACPI device ID
  ACPI: Update Tiger Lake ACPI device IDs
  ACPI: video: Use native backlight on Acer Aspire 5783z
  ACPI: video: Docs update for "acpi_backlight" kernel parameter options
  ACPICA: Update version 20200326
  ACPICA: Fixes for acpiExec namespace init file
  ACPICA: Add NHLT table signature
  ACPICA: WSMT: Fix typo, no functional change
  ACPICA: utilities: fix sprintf()
  ACPICA: acpiexec: remove redeclaration of acpi_gbl_db_opt_no_region_support
  ACPICA: Change PlatformCommChannel ASL keyword to PCC
  ACPICA: Fix IVRS IVHD type 10h reserved field name
  ACPICA: Implement IVRS IVHD type 11h parsing
  ACPICA: Fix a typo in a comment field
  ACPI: CPPC: clean up acpi_get_psd_map()

Pull more power management updates from Rafael Wysocki:
 "Additional power management updates.

  These fix a corner-case suspend-to-idle wakeup issue on systems where
  the ACPI SCI is shared with another wakeup source, add a kernel
  command line option to set pm_debug_messages via the kernel command
  line, add a document desctibing system-wide suspend and resume code
  flows, modify cpufreq Kconfig to choose schedutil as the preferred
  governor by default in a couple of cases and do some assorted
  cleanups.

  Specifics:

   - Fix corner-case suspend-to-idle wakeup issue on systems where the
     ACPI SCI is shared with another wakeup source (Hans de Goede).

   - Add document describing system-wide suspend and resume code flows
     to the admin guide (Rafael Wysocki).

   - Add kernel command line option to set pm_debug_messages (Chen Yu).

   - Choose schedutil as the preferred scaling governor by default on
     ARM big.LITTLE systems and on x86 systems using the intel_pstate
     driver in the passive mode (Linus Walleij, Rafael Wysocki).

   - Drop racy and redundant checks from the PM core's device_prepare()
     routine (Rafael Wysocki).

   - Make resume from hibernation take the hibernation_restore() return
     value into account (Dexuan Cui)"

* tag 'pm-5.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  platform/x86: intel_int0002_vgpio: Use acpi_register_wakeup_handler()
  ACPI: PM: Add acpi_[un]register_wakeup_handler()
  Documentation: PM: sleep: Document system-wide suspend code flows
  cpufreq: Select schedutil when using big.LITTLE
  PM: sleep: Add pm_debug_messages kernel command line option
  PM: sleep: core: Drop racy and redundant checks from device_prepare()
  PM: hibernate: Propagate the return value of hibernation_restore()
  cpufreq: intel_pstate: Select schedutil as the default governor

Pull csky updates from Guo Ren:

 - Add kproobes/uprobes support

 - Add lockdep, rseq, gcov support

 - Fixup init_fpu

 - Fixup ftrace_modify deadlock

 - Fixup speculative execution on IO area

* tag 'csky-for-linus-5.7-rc1' of git://github.com/c-sky/csky-linux:
  csky: Fixup cpu speculative execution to IO area
  csky: Add uprobes support
  csky: Add kprobes supported
  csky: Enable LOCKDEP_SUPPORT
  csky: Enable the gcov function
  csky: Fixup get wrong psr value from phyical reg
  csky/ftrace: Fixup ftrace_modify_code deadlock without CPU_HAS_ICACHE_INS
  csky: Implement ftrace with regs
  csky: Add support for restartable sequence
  csky: Implement ptrace regs and stack API
  csky: Fixup init_fpu compile warning with __init

Pull fsnotify updates from Jan Kara:
 "This implements the fanotify FAN_DIR_MODIFY event.

  This event reports the name in a directory under which a change
  happened and together with the directory filehandle and fstatat()
  allows reliable and efficient implementation of directory
  synchronization"

* tag 'fsnotify_for_v5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  fanotify: Fix the checks in fanotify_fsid_equal
  fanotify: report name info for FAN_DIR_MODIFY event
  fanotify: record name info for FAN_DIR_MODIFY event
  fanotify: Drop fanotify_event_has_fid()
  fanotify: prepare to report both parent and child fid's
  fanotify: send FAN_DIR_MODIFY event flavor with dir inode and name
  fanotify: divorce fanotify_path_event and fanotify_fid_event
  fanotify: Store fanotify handles differently
  fanotify: Simplify create_fd()
  fanotify: fix merging marks masks with FAN_ONDIR
  fanotify: merge duplicate events on parent and child
  fsnotify: replace inode pointer with an object id
  fsnotify: simplify arguments passing to fsnotify_parent()
  fsnotify: use helpers to access data by data_type
  fsnotify: funnel all dirent events through fsnotify_name()
  fsnotify: factor helpers fsnotify_dentry() and fsnotify_file()
  fsnotify: tidy up FS_ and FAN_ constants

Pull ext2/udf updates from Jan Kara:
 "Cleanups and fixes for ext2 and one cleanup for udf"

* tag 'for_v5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  ext2: fix empty body warnings when -Wextra is used
  ext2: fix debug reference to ext2_xattr_cache
  udf: udf_sb.h: Replace zero-length array with flexible-array member
  ext2: xattr.h: Replace zero-length array with flexible-array member
  ext2: Silence lockdep warning about reclaim under xattr_sem

Pull 9p updates from Dominique Martinet:
 "Not much new, but a few patches for this cycle:

   - Fix read with O_NONBLOCK to allow incomplete read and return
     immediately

   - Rest is just cleanup (indent, unused field in struct, extra
     semicolon)"

* tag '9p-for-5.7' of git://github.com/martinetd/linux:
  net/9p: remove unused p9_req_t aux field
  9p: read only once on O_NONBLOCK
  9pnet: allow making incomplete read requests
  9p: Remove unneeded semicolon
  9p: Fix Kconfig indentation

Pull vfs pathwalk fix from Al Viro:
 "Dumb braino in legitimize_path()..."

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  fix a braino in legitimize_path()

brown paperbag time... wrong order of arguments ended up confusing
the values to check dentry and mount_lock seqcounts against.
Reported-by: kernel test robot <rong.a.chen@intel.com>
Fixes: 2aa38470 ("non-RCU analogue of the previous commit")
Tested-by: kernel test robot <rong.a.chen@intel.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

* acpi-cppc:
  ACPI: CPPC: clean up acpi_get_psd_map()

* acpi-video:
  ACPI: video: Use native backlight on Acer Aspire 5783z
  ACPI: video: Docs update for "acpi_backlight" kernel parameter options

* acpi-drivers:
  thermal: int340x_thermal: fix: Update Tiger Lake ACPI device IDs
  platform/x86: intel-hid: fix: Update Tiger Lake ACPI device ID
  ACPI: Update Tiger Lake ACPI device IDs

* acpica:
  ACPICA: Update version 20200326
  ACPICA: Fixes for acpiExec namespace init file
  ACPICA: Add NHLT table signature
  ACPICA: WSMT: Fix typo, no functional change
  ACPICA: utilities: fix sprintf()
  ACPICA: acpiexec: remove redeclaration of acpi_gbl_db_opt_no_region_support
  ACPICA: Change PlatformCommChannel ASL keyword to PCC
  ACPICA: Fix IVRS IVHD type 10h reserved field name
  ACPICA: Implement IVRS IVHD type 11h parsing
  ACPICA: Fix a typo in a comment field

* pm-sleep:
  Documentation: PM: sleep: Document system-wide suspend code flows
  PM: sleep: Add pm_debug_messages kernel command line option
  PM: sleep: core: Drop racy and redundant checks from device_prepare()
  PM: hibernate: Propagate the return value of hibernation_restore()

* pm-cpufreq:
  cpufreq: Select schedutil when using big.LITTLE
  cpufreq: intel_pstate: Select schedutil as the default governor

Pull power supply and reset changes from Sebastian Reichel:
 "Core:
   - Nothing

  Drivers:
   - at91-reset: cleanups, proper handling for sam9x60
   - sc27xx, charger-manager: allow building as module
   - sc27xx: add support to read current charge capacity
   - axp288: more quirks for weird hardware
   - misc fixes"

* tag 'for-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (26 commits)
  power: reset: sc27xx: Allow the SC27XX poweroff driver building into a module
  power: reset: sc27xx: Change to use cpu_down()
  power: reset: sc27xx: Power off the external subsystems' connection
  power: twl4030: Use scnprintf() for avoiding potential buffer overflow
  power: supply: bq27xxx_battery: Silence deferred-probe error
  power: reset: at91-reset: handle nrst async for sam9x60
  power: reset: at91-reset: get rid of at91_reset_data
  power: reset: at91-reset: keep only one reset function
  power: reset: at91-reset: make at91sam9g45_restart() generic
  power: reset: at91-reset: introduce ramc_lpr to struct at91_reset
  power: reset: at91-reset: use r4 as tmp argument
  power: reset: at91-reset: introduce args member in at91_reset_data
  power: reset: at91-reset: introduce struct at91_reset_data
  power: reset: at91-reset: devm_kzalloc() for at91_reset data structure
  power: reset: at91-reset: pass rstc base address to at91_reset_status()
  power: reset: at91-reset: convert reset in pointer to struct at91_reset
  power: reset: at91-reset: add notifier block to struct at91_reset
  power: reset: at91-reset: add sclk to struct at91_reset
  power: reset: at91-reset: add ramc_base[] to struct at91_reset
  power: reset: at91-reset: introduce struct at91_reset
  ...

Pull more perf updates from Thomas Gleixner:
 "Perf updates all over the place:

  core:

   - Support for cgroup tracking in samples to allow cgroup based
     analysis

  tools:

   - Support for cgroup analysis

   - Commandline option and hotkey for perf top to change the sort order

   - A set of fixes all over the place

   - Various build system related improvements

   - Updates of the X86 pmu event JSON data

   - Documentation updates"

* tag 'perf-urgent-2020-04-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (55 commits)
  perf python: Fix clang detection to strip out options passed in $CC
  perf tools: Support Python 3.8+ in Makefile
  perf script: Fix invalid read of directory entry after closedir()
  perf script report: Fix SEGFAULT when using DWARF mode
  perf script: add -S/--symbols documentation
  perf pmu-events x86: Use CPU_CLK_UNHALTED.THREAD in Kernel_Utilization metric
  perf events parser: Add missing Intel CPU events to parser
  perf script: Allow --symbol to accept hexadecimal addresses
  perf report/top TUI: Fix title line formatting
  perf top: Support hotkey to change sort order
  perf top: Support --group-sort-idx to change the sort order
  perf symbols: Fix arm64 gap between kernel start and module end
  perf build-test: Honour JOBS to override detection of number of cores
  perf script: Add --show-cgroup-events option
  perf top: Add --all-cgroups option
  perf record: Add --all-cgroups option
  perf record: Support synthesizing cgroup events
  perf report: Add 'cgroup' sort key
  perf cgroup: Maintain cgroup hierarchy
  perf tools: Basic support for CGROUP event
  ...

Pull timer fixes from Thomas Gleixner:
 "Two timer subsystem fixes:

   - Prevent a use after free in the new lockdep state tracking for
     hrtimers

   - Add missing parenthesis in the VF pit timer driver"

* tag 'timers-urgent-2020-04-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  clocksource/drivers/timer-vf-pit: Add missing parenthesis
  hrtimer: Don't dereference the hrtimer pointer after the callback

Pull irq fixes from Thomas Gleixner:
 "Two reverts addressing regressions of the Xilinx interrupt controller
  driver which affected the PPC users"

* tag 'irq-urgent-2020-04-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  Revert "irqchip/xilinx: Enable generic irq multi handler"
  Revert "irqchip/xilinx: Do not call irq_set_default_host()"

Commit 9255782f ("sysfs: Wrap __compat_only_sysfs_link_entry_to_kobj
function to change the symlink name") made this function a wrapper
around a new non-underscored function, which is a bit odd.  The normal
naming convention is the other way around: the underscored function is
the wrappee, and the non-underscored function is the wrapper.

There's only one single user (well, two call-sites in that user) of the
more limited double underscore version of this function, so just remove
the oddly named wrapper entirely and just add the extra NULL argument to
the user.

I considered just doing that in the merge, but that tends to make
history really hard to read.

Link: https://lore.kernel.org/lkml/CAHk-=wgkkmNV5tMzQDmPAQuNJBuMcry--Jb+h8H1o4RA3kF7QQ@mail.gmail.com/
Cc: Sourabh Jain <sourabhjain@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull powerpc updates from Michael Ellerman:
 "Slightly late as I had to rebase mid-week to insert a bug fix:

   - A large series from Nick for 64-bit to further rework our exception
     vectors, and rewrite portions of the syscall entry/exit and
     interrupt return in C. The result is much easier to follow code
     that is also faster in general.

   - Cleanup of our ptrace code to split various parts out that had
     become badly intertwined with #ifdefs over the years.

   - Changes to our NUMA setup under the PowerVM hypervisor which should
     hopefully avoid non-sensical topologies which can lead to warnings
     from the workqueue code and other problems.

   - MAINTAINERS updates to remove some of our old orphan entries and
     update the status of others.

   - Quite a few other small changes and fixes all over the map.

  Thanks to: Abdul Haleem, afzal mohammed, Alexey Kardashevskiy, Andrew
  Donnellan, Aneesh Kumar K.V, Balamuruhan S, Cédric Le Goater, Chen
  Zhou, Christophe JAILLET, Christophe Leroy, Christoph Hellwig, Clement
  Courbet, Daniel Axtens, David Gibson, Douglas Miller, Fabiano Rosas,
  Fangrui Song, Ganesh Goudar, Gautham R. Shenoy, Greg Kroah-Hartman,
  Greg Kurz, Gustavo Luiz Duarte, Hari Bathini, Ilie Halip, Jan Kara,
  Joe Lawrence, Joe Perches, Kajol Jain, Larry Finger, Laurentiu Tudor,
  Leonardo Bras, Libor Pechacek, Madhavan Srinivasan, Mahesh Salgaonkar,
  Masahiro Yamada, Masami Hiramatsu, Mauricio Faria de Oliveira, Michael
  Neuling, Michal Suchanek, Mike Rapoport, Nageswara R Sastry, Nathan
  Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Nick
  Desaulniers, Oliver O'Halloran, Po-Hsu Lin, Pratik Rajesh Sampat,
  Rasmus Villemoes, Ravi Bangoria, Roman Bolshakov, Sam Bobroff,
  Sandipan Das, Santosh S, Sedat Dilek, Segher Boessenkool, Shilpasri G
  Bhat, Sourabh Jain, Srikar Dronamraju, Stephen Rothwell, Tyrel
  Datwyler, Vaibhav Jain, YueHaibing"

* tag 'powerpc-5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (158 commits)
  powerpc: Make setjmp/longjmp signature standard
  powerpc/cputable: Remove unnecessary copy of cpu_spec->oprofile_type
  powerpc: Suppress .eh_frame generation
  powerpc: Drop -fno-dwarf2-cfi-asm
  powerpc/32: drop unused ISA_DMA_THRESHOLD
  powerpc/powernv: Add documentation for the opal sensor_groups sysfs interfaces
  selftests/powerpc: Fix try-run when source tree is not writable
  powerpc/vmlinux.lds: Explicitly retain .gnu.hash
  powerpc/ptrace: move ptrace_triggered() into hw_breakpoint.c
  powerpc/ptrace: create ppc_gethwdinfo()
  powerpc/ptrace: create ptrace_get_debugreg()
  powerpc/ptrace: split out ADV_DEBUG_REGS related functions.
  powerpc/ptrace: move register viewing functions out of ptrace.c
  powerpc/ptrace: split out TRANSACTIONAL_MEM related functions.
  powerpc/ptrace: split out SPE related functions.
  powerpc/ptrace: split out ALTIVEC related functions.
  powerpc/ptrace: split out VSX related functions.
  powerpc/ptrace: drop PARAMETER_SAVE_AREA_OFFSET
  powerpc/ptrace: drop unnecessary #ifdefs CONFIG_PPC64
  powerpc/ptrace: remove unused header includes
  ...

Pull /dev/random updates from Ted Ts'o:

 - Improve getrandom and /dev/random's support for those arm64
   architecture variants that have RNG instructions.

 - Use batched output from CRNG instead of CPU's RNG instructions for
   better performance.

 - Miscellaneous bug fixes.

* tag 'random_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random:
  random: avoid warnings for !CONFIG_NUMA builds
  random: fix data races at timer_rand_state
  random: always use batched entropy for get_random_u{32,64}
  random: Make RANDOM_TRUST_CPU depend on ARCH_RANDOM
  arm64: add credited/trusted RNG support
  random: add arch_get_random_*long_early()
  random: split primary/secondary crng init paths

Pull ext4 updates from Ted Ts'o:

 - Replace ext4's bmap and iopoll implementations to use iomap.

 - Clean up extent tree handling.

 - Other cleanups and miscellaneous bug fixes

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (31 commits)
  ext4: save all error info in save_error_info() and drop ext4_set_errno()
  ext4: fix incorrect group count in ext4_fill_super error message
  ext4: fix incorrect inodes per group in error message
  ext4: don't set dioread_nolock by default for blocksize < pagesize
  ext4: disable dioread_nolock whenever delayed allocation is disabled
  ext4: do not commit super on read-only bdev
  ext4: avoid ENOSPC when avoiding to reuse recently deleted inodes
  ext4: unregister sysfs path before destroying jbd2 journal
  ext4: check for non-zero journal inum in ext4_calculate_overhead
  ext4: remove map_from_cluster from ext4_ext_map_blocks
  ext4: clean up ext4_ext_insert_extent() call in ext4_ext_map_blocks()
  ext4: mark block bitmap corrupted when found instead of BUGON
  ext4: use flexible-array member for xattr structs
  ext4: use flexible-array member in struct fname
  Documentation: correct the description of FIEMAP_EXTENT_LAST
  ext4: move ext4_fiemap to use iomap framework
  ext4: make ext4_ind_map_blocks work with fiemap
  ext4: move ext4 bmap to use iomap infrastructure
  ext4: optimize ext4_ext_precache for 0 depth
  ext4: add IOMAP_F_MERGED for non-extent based mapping
  ...

Pull clk updates from Stephen Boyd:
 "There's not much to see in the core framework this time around.
  Instead the majority of the diff is the normal collection of driver
  additions for new SoCs and non-critical clk data fixes and updates.
  The framework must be middle aged.

  The two biggest directories in the diffstat show that the Qualcomm and
  Unisoc support added a handful of big drivers for new SoCs but that's
  not really the whole story because those new drivers tend to add large
  numbers of lines of clk data. There's a handful of AT91 clk drivers
  added this time around too and a bunch of improvements to drivers like
  the i.MX driver. All around lots of updates and fixes in various clk
  drivers which is good to see.

  The core framework has only one real major change which has been
  baking in next for the past couple months. It fixes the framework so
  that it stops caching a clk's phase when the phase clk_op returns an
  error. Before this change we would consider some negative errno as a
  phase and that just doesn't make sense.

  Core:
   - Don't show clk phase when it is invalid

  New Drivers:
   - Add support for Unisoc SC9863A clks
   - Qualcomm SM8250 RPMh and MSM8976 RPM clks
   - Qualcomm SM8250 Global Clock Controller (GCC) support
   - Qualcomm SC7180 Modem Clock Controller (MSS CC) support
   - EHRPWM's TimeBase clock(TBCLK) for TI AM654 SoCs
   - Support PMC clks on at91sam9n12, at91rm9200, sama5d3, and
     at91sam9g45 SoCs

  Updates:
   - GPU GX GDSC support on Qualcomm sc7180
   - Fixes and improvements for the Marvell MMP2/MMP3 SoC clk drivers
   - A series from Anson to convert i.MX8 clock bindings to json-schema
   - Update i.MX pll14xx driver to include new frequency entries for
     pll1443x table, and return error for invalid PLL type
   - Add missing of_node_put() call for a number of i.MX clock drivers
   - Drop flag CLK_IS_CRITICAL from 'A53_CORE' mux clock, as we already
     have the flag on its child cpu clock
   - Fix a53 cpu clock for i.MX8 drivers to get it source from ARM PLL
     via CORE_SEL slice, and source from A53 CCM clk root when we need
     to change ARM PLL frequency. Thus, we can support core running
     above 1GHz safely
   - Update i.MX pfdv2 driver to check zero rate and use determine_rate
     for getting the best rate
   - Add CLKO2 for imx8mm, SNVS clock for imx8mn, and PXP clock for
     imx7d
   - Remove PMC clks from Tegra clk driver
   - Improved clock/reset handling for the Renesas R-Car USB2 Clock
     Selector
   - Conversion to json-schema of the Renesas CPG/MSSR DT bindings
   - Add Crypto clocks on Renesas R-Car M3-W/W+, M3-N, E3, and D3
   - Add RPC (QSPI/HyperFLASH) clocks on Renesas R-Car H3, M3-W/W+, and
     M3-N
   - Update Amlogic audio clock gate hierarchy for meson8 and gxbb
   - Update Amlogic g12a spicc clock sources
   - Support for Ingenic X1000 TCU clks"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (146 commits)
  clk: sprd: fix to get a correct ibias of pll
  dt-bindings: imx8mm-clock: Fix the file path
  dt-bindings: imx8mq-clock: Fix the file path
  clk: qcom: rpmh: Drop unnecessary semicolons
  clk: qcom: rpmh: Simplify clk_rpmh_bcm_send_cmd()
  clk: tegra: Use NULL for pointer initialization
  clk: sprd: add clocks support for SC9863A
  clk: sprd: support to get regmap from parent node
  clk: sprd: Add macros for referencing parents without strings
  clk: sprd: Add dt-bindings include file for SC9863A
  dt-bindings: clk: sprd: add bindings for sc9863a clock controller
  dt-bindings: clk: sprd: rename the common file name sprd.txt to SoC specific
  clk: sprd: add gate for pll clocks
  MAINTAINERS: dt: update reference for arm-integrator.txt
  clk: mmp2: Fix bit masks for LCDC I/O and pixel clocks
  clk: mmp2: Add clock for fifth SD HCI on MMP3
  dt-bindings: marvell,mmp2: Add clock id for the fifth SD HCI on MMP3
  clk: mmp2: Add clocks for the thermal sensors
  dt-bindings: marvell,mmp2: Add clock ids for the thermal sensors
  clk: mmp2: add the GPU clocks
  ...

Pull tracing updates from Steven Rostedt:
 "New tracing features:

   - The ring buffer is no longer disabled when reading the trace file.

     The trace_pipe file was made to be used for live tracing and
     reading as it acted like the normal producer/consumer. As the trace
     file would not consume the data, the easy way of handling it was to
     just disable writes to the ring buffer.

     This came to a surprise to the BPF folks who complained about lost
     events due to reading. This is no longer an issue. If someone wants
     to keep the old disabling there's a new option "pause-on-trace"
     that can be set.

   - New set_ftrace_notrace_pid file. PIDs in this file will not be
     traced by the function tracer.

     Similar to set_ftrace_pid, which makes the function tracer only
     trace those tasks with PIDs in the file, the set_ftrace_notrace_pid
     does the reverse.

   - New set_event_notrace_pid file. PIDs in this file will cause events
     not to be traced if triggered by a task with a matching PID.

     Similar to the set_event_pid file but will not be traced. Note,
     sched_waking and sched_switch events may still be traced if one of
     the tasks referenced by those events contains a PID that is allowed
     to be traced.

  Tracing related features:

   - New bootconfig option, that is attached to the initrd file.

     If bootconfig is on the command line, then the initrd file is
     searched looking for a bootconfig appended at the end.

   - New GPU tracepoint infrastructure to help the gfx drivers to get
     off debugfs (acked by Greg Kroah-Hartman)

  And other minor updates and fixes"

* tag 'trace-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (27 commits)
  tracing: Do not allocate buffer in trace_find_next_entry() in atomic
  tracing: Add documentation on set_ftrace_notrace_pid and set_event_notrace_pid
  selftests/ftrace: Add test to test new set_event_notrace_pid file
  selftests/ftrace: Add test to test new set_ftrace_notrace_pid file
  tracing: Create set_event_notrace_pid to not trace tasks
  ftrace: Create set_ftrace_notrace_pid to not trace tasks
  ftrace: Make function trace pid filtering a bit more exact
  ftrace/kprobe: Show the maxactive number on kprobe_events
  tracing: Have the document reflect that the trace file keeps tracing enabled
  ring-buffer/tracing: Have iterator acknowledge dropped events
  tracing: Do not disable tracing when reading the trace file
  ring-buffer: Do not disable recording when there is an iterator
  ring-buffer: Make resize disable per cpu buffer instead of total buffer
  ring-buffer: Optimize rb_iter_head_event()
  ring-buffer: Do not die if rb_iter_peek() fails more than thrice
  ring-buffer: Have rb_iter_head_event() handle concurrent writer
  ring-buffer: Add page_stamp to iterator for synchronization
  ring-buffer: Rename ring_buffer_read() to read_buffer_iter_advance()
  ring-buffer: Have ring_buffer_empty() not depend on tracing stopped
  tracing: Save off entry when peeking at next entry
  ...

Recently all usage of setup_irq() was replaced by request_irq(). The
replacement in timer-vf-pit.c missed closing parentheses resulting in a build
error (vf610m4_defconfig). Fix it.

Fixes: cc2550b4 ("clocksource: Replace setup_irq() by request_irq()")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200323061130.GA6286@afzalpc

Pull keyrings fixes from David Howells:
 "Here's a couple of patches that fix a circular dependency between
  holding key->sem and mm->mmap_sem when reading data from a key.

  One potential issue is that a filesystem looking to use a key inside,
  say, ->readpages() could deadlock if the key being read is the key
  that's required and the buffer the key is being read into is on a page
  that needs to be fetched.

  The case actually detected is a bit more involved - with a filesystem
  calling request_key() and locking the target keyring for write - which
  could be being read"

* tag 'keys-fixes-20200329' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
  KEYS: Avoid false positive ENOMEM error on key read
  KEYS: Don't write out to userspace while holding key semaphore

Pull drm hugepage support from Dave Airlie:
 "This adds support for hugepages to TTM and has been tested with the
  vmwgfx drivers, though I expect other drivers to start using it"

* tag 'drm-next-2020-04-03-1' of git://anongit.freedesktop.org/drm/drm:
  drm/vmwgfx: Hook up the helpers to align buffer objects
  drm/vmwgfx: Introduce a huge page aligning TTM range manager
  drm: Add a drm_get_unmapped_area() helper
  drm/vmwgfx: Support huge page faults
  drm/ttm, drm/vmwgfx: Support huge TTM pagefaults
  mm: Add vmf_insert_pfn_xxx_prot() for huge page-table entries
  mm: Split huge pages on write-notify or COW
  mm: Introduce vma_is_special_huge
  fs: Constify vma argument to vma_is_dax

Pull exfat filesystem from Al Viro:
 "Shiny new fs/exfat replacement for drivers/staging/exfat"

* 'work.exfat' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  exfat: update file system parameter handling
  staging: exfat: make staging/exfat and fs/exfat mutually exclusive
  MAINTAINERS: add exfat filesystem
  exfat: add Kconfig and Makefile
  exfat: add nls operations
  exfat: add misc operations
  exfat: add exfat cache
  exfat: add bitmap operations
  exfat: add fat entry operations
  exfat: add file operations
  exfat: add directory operations
  exfat: add inode operations
  exfat: add super block operations
  exfat: add in-memory and on-disk structures and headers

Pull nfsd updates from Chuck Lever:

 - Fix EXCHANGE_ID response when NFSD runs in a container

 - A battery of new static trace points

 - Socket transports now use bio_vec to send Replies

 - NFS/RDMA now supports filesystems with no .splice_read method

 - Favor memcpy() over DMA mapping for small RPC/RDMA Replies

 - Add pre-requisites for supporting multiple Write chunks

 - Numerous minor fixes and clean-ups

[ Chuck is filling in for Bruce this time while he and his family settle
  into a new house ]

* tag 'nfsd-5.7' of git://git.linux-nfs.org/projects/cel/cel-2.6: (39 commits)
  svcrdma: Fix leak of transport addresses
  SUNRPC: Fix a potential buffer overflow in 'svc_print_xprts()'
  SUNRPC/cache: don't allow invalid entries to be flushed
  nfsd: fsnotify on rmdir under nfsd/clients/
  nfsd4: kill warnings on testing stateids with mismatched clientids
  nfsd: remove read permission bit for ctl sysctl
  NFSD: Fix NFS server build errors
  sunrpc: Add tracing for cache events
  SUNRPC/cache: Allow garbage collection of invalid cache entries
  nfsd: export upcalls must not return ESTALE when mountd is down
  nfsd: Add tracepoints for update of the expkey and export cache entries
  nfsd: Add tracepoints for exp_find_key() and exp_get_by_name()
  nfsd: Add tracing to nfsd_set_fh_dentry()
  nfsd: Don't add locks to closed or closing open stateids
  SUNRPC: Teach server to use xprt_sock_sendmsg for socket sends
  SUNRPC: Refactor xs_sendpages()
  svcrdma: Avoid DMA mapping small RPC Replies
  svcrdma: Fix double sync of transport header buffer
  svcrdma: Refactor chunk list encoders
  SUNRPC: Add encoders for list item discriminators
  ...

The Power Management Events (PMEs) the INT0002 driver listens for get
signalled by the Power Management Controller (PMC) using the same IRQ
as used for the ACPI SCI.

Since commit fdde0ff8 ("ACPI: PM: s2idle: Prevent spurious SCIs from
waking up the system") the SCI triggering, without there being a wakeup
cause recognized by the ACPI sleep code, will no longer wakeup the system.

This breaks PMEs / wakeups signalled to the INT0002 driver, the system
never leaves the s2idle_loop() now.

Use acpi_register_wakeup_handler() to register a function which checks
the GPE0a_STS register for a PME and trigger a wakeup when a PME has
been signalled.

Fixes: fdde0ff8 ("ACPI: PM: s2idle: Prevent spurious SCIs from waking up the system")
Cc: 5.4+ <stable@vger.kernel.org> # 5.4+
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Since commit fdde0ff8 ("ACPI: PM: s2idle: Prevent spurious SCIs from
waking up the system") the SCI triggering without there being a wakeup
cause recognized by the ACPI sleep code will no longer wakeup the system.

This works as intended, but this is a problem for devices where the SCI
is shared with another device which is also a wakeup source.

In the past these, from the pov of the ACPI sleep code, spurious SCIs
would still cause a wakeup so the wakeup from the device sharing the
interrupt would actually wakeup the system. This now no longer works.

This is a problem on e.g. Bay Trail-T and Cherry Trail devices where
some peripherals (typically the XHCI controller) can signal a
Power Management Event (PME) to the Power Management Controller (PMC)
to wakeup the system, this uses the same interrupt as the SCI.
These wakeups are handled through a special INT0002 ACPI device which
checks for events in the GPE0a_STS for this and takes care of acking
the PME so that the shared interrupt stops triggering.

The change to the ACPI sleep code to ignore the spurious SCI, causes
the system to no longer wakeup on these PME events. To make things
worse this means that the INT0002 device driver interrupt handler will
no longer run, causing the PME to not get cleared and resulting in the
system hanging. Trying to wakeup the system after such a PME through e.g.
the power button no longer works.

Add an acpi_register_wakeup_handler() function which registers
a handler to be called from acpi_s2idle_wake() and when the handler
returns true, return true from acpi_s2idle_wake().

The INT0002 driver will use this mechanism to check the GPE0a_STS
register from acpi_s2idle_wake() and to tell the system to wakeup
if a PME is signaled in the register.

Fixes: fdde0ff8 ("ACPI: PM: s2idle: Prevent spurious SCIs from waking up the system")
Cc: 5.4+ <stable@vger.kernel.org> # 5.4+
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Pull RTC updates from Alexandre Belloni:
 "More cleanup this cycle, with the final goal of removing the
  rtc_time_to_tm and rtc_tm_to_time wrappers. All the drivers that have
  been modified for this now are ready for the end of times (whether it
  happens in 2033, 2038, 2106, 2127 or even 4052). There is also a
  single new driver and the usual fixes and features.

  Summary:

  Subsystem:

   - The rtc_time_to_tm and rtc_tm_to_time wrappers have finally been
     removed and only the 64bit version remain.

   - hctosys now works with drivers compiled as modules

  New driver:

   - MediaTek MT2712 SoC based RTC

  Drivers:

   - set range for 88pm860x, au1xxx, cpcap, da9052, davinci, ds1305,
     ds1374, mcp5121, pl030, pl031, pm8xxx, puv3, sa1100, sirfsoc,
     starfire, sun6i

   - ds1307: DS1388 oscillator failure detection and watchdog support

   - jz4740: JZ4760 support

   - pcf85063: clock out pin support

   - sun6i: external 32k oscillator is now optional, the range is now
     handled by the core, providing a solution for 2034"

* tag 'rtc-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (87 commits)
  rtc: ds1307: check for failed memory allocation on wdt
  rtc: class: remove redundant assignment to variable err
  rtc: remove rtc_time_to_tm and rtc_tm_to_time
  rtc: sun6i: let the core handle rtc range
  rtc: sun6i: switch to rtc_time64_to_tm/rtc_tm_to_time64
  rtc: ds1307: add support for watchdog timer on ds1388
  rtc: da9052: switch to rtc_time64_to_tm/rtc_tm_to_time64
  rtc: da9052: set range
  rtc: da9052: convert to devm_rtc_allocate_device
  rtc: imx-sc: Align imx sc msg structs to 4
  rtc: fsl-ftm-alarm: report alarm to core
  rtc: pcf85063: Add pcf85063 clkout control to common clock framework
  rtc: make definitions in include/uapi/linux/rtc.h actually useful for user space
  rtc: class: avoid unnecessary lookup in hctosys
  dt-bindings: rtc: Convert and update jz4740-rtc doc to YAML
  rtc: jz4740: Rename vendor-specific DT properties
  rtc: jz4740: Add support for JZ4760 SoC
  rtc: class: support hctosys from modular RTC drivers
  rtc: pm8xxx: clear alarm register when alarm is not enabled
  rtc: omap: drop unused dt-bindings header
  ...

Pull GPIO updates from Linus Walleij:
 "This is the bulk of GPIO development for the v5.7 kernel cycle.

  Core and userspace API:

   - The userspace API KFIFOs have been imoproved with locks that do not
     block interrupts. This makes us better at getting events to
     userspace without blocking or disturbing new events arriving in the
     same time. This was reviewed by the KFIFO maintainer Stefani. This
     is a generic improvement which paves the road for similar
     improvements in other subsystems.

   - We provide a new ioctl() for monitoring changes in the line
     information, such as when multiple clients are taking lines and
     giving them back, possibly reconfiguring them in the process: we
     can now monitor that and not get stuck with stale static
     information.

   - An example tool 'gpio-watch' is provided to showcase this
     functionality.

   - Timestamps for events are switched to ktime_get_ns() which is
     monotonic. We previously had a 'realtime' stamp which could move
     forward and *backward* in time, which probably would just cause
     silent bugs and weird behaviour. In the long run we see two
     relevant timestamps: ktime_get_ns() or the timestamp sometimes
     provided by the GPIO hardware itself, if that exists.

   - Device Tree overlay support for GPIO hogs. On systems that load
     overlays, these overlays can now contain hogs, and will then be
     respected.

   - Handle pin control interaction with nonexisting pin ranges in the
     GPIO library core instead of in the individual drivers.

  New drivers:

   - New driver for the Mellanox BlueField 2 GPIO controller.

  Driver improvements:

   - Introduce the BGPIOF_NO_SET_ON_INPUT flag to the generic MMIO GPIO
     library and use this flag in the MT7621 driver.

   - Texas Instruments OMAP CPU power management improvements, such as
     blocking of idle on pending GPIO interrupts"

* tag 'gpio-v5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (59 commits)
  Revert "gpio: eic-sprd: Use devm_platform_ioremap_resource()"
  pinctrl: Unconditionally assign .request()/.free()
  gpio: Unconditionally assign .request()/.free()
  gpio: export of_pinctrl_get to modules
  pinctrl: Define of_pinctrl_get() dummy for !PINCTRL
  gpio: Rename variable in core APIs
  gpio: Avoid using pin ranges with !PINCTRL
  gpiolib: Remove unused gpio_chip parameter from gpio_set_bias()
  gpiolib: Pass gpio_desc to gpio_set_config()
  gpiolib: Introduce gpiod_set_config()
  tools: gpio: Fix out-of-tree build regression
  gpio: gpiolib: fix a doc warning
  gpio: tegra186: Add Tegra194 pin ranges for GG.0 and GG.1
  gpio: tegra186: Add support for pin ranges
  gpio: Support GPIO controllers without pin-ranges
  ARM: integrator: impd1: Use GPIO_LOOKUP() helper macro
  gpio: brcmstb: support gpio-line-names property
  tools: gpio: Fix typo in gpio-utils
  tools: gpio-hammer: Apply scripts/Lindent and retain good changes
  gpiolib: gpio_name_to_desc: factor out !name check
  ...

Pull dma-mapping updates from Christoph Hellwig:

 - fix an integer overflow in the coherent pool (Kevin Grandemange)

 - provide support for in-place uncached remapping and use that for
   openrisc

 - fix the arm coherent allocator to take the bus limit into account

* tag 'dma-mapping-5.7' of git://git.infradead.org/users/hch/dma-mapping:
  ARM/dma-mapping: merge __dma_supported into arm_dma_supported
  ARM/dma-mapping: take the bus limit into account in __dma_alloc
  ARM/dma-mapping: remove get_coherent_dma_mask
  openrisc: use the generic in-place uncached DMA allocator
  dma-direct: provide a arch_dma_clear_uncached hook
  dma-direct: make uncached_kernel_address more general
  dma-direct: consolidate the error handling in dma_direct_alloc_pages
  dma-direct: remove the cached_kernel_address hook
  dma-coherent: fix integer overflow in the reserved-memory dma allocation

Pull thread updates from Christian Brauner:
 "The main change for this cycle was the extension for clone3() to
  support spawning processes directly into cgroups via CLONE_INTO_CGROUP
  (commit ef2c41cf: "clone3: allow spawning processes
  into cgroups").

  But since I had to touch kernel/cgroup/ quite a bit I had Tejun route
  that through his tree this time around to make it easier for him to
  handle other changes.

  So here is just the unexciting leftovers: a regression test for the
  ENOMEM regression we fixed in commit b26ebfe1 ("pid: Fix error
  return value in some cases") verifying that we report ENOMEM when
  trying to create a new process in a pid namespace whose init
  process/subreaper has already exited"

* tag 'threads-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
  selftests: add pid namespace ENOMEM regression test

Pull VFIO updates from Alex Williamson:

 - vfio-pci SR-IOV support (Alex Williamson)

 - vfio DMA read/write interface (Yan Zhao)

 - Fix vfio-platform erroneous IRQ error log (Eric Auger)

 - Fix shared ATSD support for NVLink on POWER (Sam Bobroff)

 - Fix init error without CONFIG_IOMMU_DMA (Andre Przywara)

* tag 'vfio-v5.7-rc1' of git://github.com/awilliam/linux-vfio:
  vfio: Ignore -ENODEV when getting MSI cookie
  vfio-pci/nvlink2: Allow fallback to ibm,mmio-atsd[0]
  vfio/pci: Cleanup .probe() exit paths
  vfio/pci: Remove dev_fmt definition
  vfio/pci: Add sriov_configure support
  vfio: Introduce VFIO_DEVICE_FEATURE ioctl and first user
  vfio/pci: Introduce VF token
  vfio/pci: Implement match ops
  vfio: Include optional device match in vfio_device_ops callbacks
  vfio: avoid inefficient operations on VFIO group in vfio_pin/unpin_pages
  vfio: introduce vfio_dma_rw to read/write a range of IOVAs
  vfio: allow external user to get vfio group from device
  vfio: platform: Switch to platform_get_irq_optional()

Pull s390 updates from Vasily Gorbik:

 - Update maintainers. Niklas Schnelle takes over zpci and Vineeth
   Vijayan common io code.

 - Extend cpuinfo to include topology information.

 - Add new extended counters for IBM z15 and sampling buffer allocation
   rework in perf code.

 - Add control over zeroing out memory during system restart.

 - CCA protected key block version 2 support and other
   fixes/improvements in crypto code.

 - Convert to new fallthrough; annotations.

 - Replace zero-length arrays with flexible-arrays.

 - QDIO debugfs and other small improvements.

 - Drop 2-level paging support optimization for compat tasks. Varios mm
   cleanups.

 - Remove broken and unused hibernate / power management support.

 - Remove fake numa support which does not bring any benefits.

 - Exclude offline CPUs from CPU topology masks to be more consistent
   with other architectures.

 - Prevent last branching instruction address leaking to userspace.

 - Other small various fixes and improvements all over the code.

* tag 's390-5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (57 commits)
  s390/mm: cleanup init_new_context() callback
  s390/mm: cleanup virtual memory constants usage
  s390/mm: remove page table downgrade support
  s390/qdio: set qdio_irq->cdev at allocation time
  s390/qdio: remove unused function declarations
  s390/ccwgroup: remove pm support
  s390/ap: remove power management code from ap bus and drivers
  s390/zcrypt: use kvmalloc instead of kmalloc for 256k alloc
  s390/mm: cleanup arch_get_unmapped_area() and friends
  s390/ism: remove pm support
  s390/cio: use fallthrough;
  s390/vfio: use fallthrough;
  s390/zcrypt: use fallthrough;
  s390: use fallthrough;
  s390/cpum_sf: Fix wrong page count in error message
  s390/diag: fix display of diagnose call statistics
  s390/ap: Remove ap device suspend and resume callbacks
  s390/pci: Improve handling of unset UID
  s390/pci: Fix zpci_alloc_domain() over allocation
  s390/qdio: pass ISC as parameter to chsc_sadc()
  ...

Similar to commit 0266d81e ("acpi/processor: Prevent cpu hotplug
deadlock") except this is for acpi_processor_ffh_cstate_probe():

"The problem is that the work is scheduled on the current CPU from the
hotplug thread associated with that CPU.

It's not required to invoke these functions via the workqueue because
the hotplug thread runs on the target CPU already.

Check whether current is a per cpu thread pinned on the target CPU and
invoke the function directly to avoid the workqueue."

 WARNING: possible circular locking dependency detected
 ------------------------------------------------------
 cpuhp/1/15 is trying to acquire lock:
 ffffc90003447a28 ((work_completion)(&wfc.work)){+.+.}-{0:0}, at: __flush_work+0x4c6/0x630

 but task is already holding lock:
 ffffffffafa1c0e8 (cpuidle_lock){+.+.}-{3:3}, at: cpuidle_pause_and_lock+0x17/0x20

 which lock already depends on the new lock.

 the existing dependency chain (in reverse order) is:

 -> #1 (cpu_hotplug_lock){++++}-{0:0}:
 cpus_read_lock+0x3e/0xc0
 irq_calc_affinity_vectors+0x5f/0x91
 __pci_enable_msix_range+0x10f/0x9a0
 pci_alloc_irq_vectors_affinity+0x13e/0x1f0
 pci_alloc_irq_vectors_affinity at drivers/pci/msi.c:1208
 pqi_ctrl_init+0x72f/0x1618 [smartpqi]
 pqi_pci_probe.cold.63+0x882/0x892 [smartpqi]
 local_pci_probe+0x7a/0xc0
 work_for_cpu_fn+0x2e/0x50
 process_one_work+0x57e/0xb90
 worker_thread+0x363/0x5b0
 kthread+0x1f4/0x220
 ret_from_fork+0x27/0x50

 -> #0 ((work_completion)(&wfc.work)){+.+.}-{0:0}:
 __lock_acquire+0x2244/0x32a0
 lock_acquire+0x1a2/0x680
 __flush_work+0x4e6/0x630
 work_on_cpu+0x114/0x160
 acpi_processor_ffh_cstate_probe+0x129/0x250
 acpi_processor_evaluate_cst+0x4c8/0x580
 acpi_processor_get_power_info+0x86/0x740
 acpi_processor_hotplug+0xc3/0x140
 acpi_soft_cpu_online+0x102/0x1d0
 cpuhp_invoke_callback+0x197/0x1120
 cpuhp_thread_fun+0x252/0x2f0
 smpboot_thread_fn+0x255/0x440
 kthread+0x1f4/0x220
 ret_from_fork+0x27/0x50

 other info that might help us debug this:

 Chain exists of:
 (work_completion)(&wfc.work) --> cpuhp_state-up --> cpuidle_lock

 Possible unsafe locking scenario:

 CPU0                    CPU1
 ----                    ----
 lock(cpuidle_lock);
                         lock(cpuhp_state-up);
                         lock(cpuidle_lock);
 lock((work_completion)(&wfc.work));

 *** DEADLOCK ***

 3 locks held by cpuhp/1/15:
 #0: ffffffffaf51ab10 (cpu_hotplug_lock){++++}-{0:0}, at: cpuhp_thread_fun+0x69/0x2f0
 #1: ffffffffaf51ad40 (cpuhp_state-up){+.+.}-{0:0}, at: cpuhp_thread_fun+0x69/0x2f0
 #2: ffffffffafa1c0e8 (cpuidle_lock){+.+.}-{3:3}, at: cpuidle_pause_and_lock+0x17/0x20

 Call Trace:
 dump_stack+0xa0/0xea
 print_circular_bug.cold.52+0x147/0x14c
 check_noncircular+0x295/0x2d0
 __lock_acquire+0x2244/0x32a0
 lock_acquire+0x1a2/0x680
 __flush_work+0x4e6/0x630
 work_on_cpu+0x114/0x160
 acpi_processor_ffh_cstate_probe+0x129/0x250
 acpi_processor_evaluate_cst+0x4c8/0x580
 acpi_processor_get_power_info+0x86/0x740
 acpi_processor_hotplug+0xc3/0x140
 acpi_soft_cpu_online+0x102/0x1d0
 cpuhp_invoke_callback+0x197/0x1120
 cpuhp_thread_fun+0x252/0x2f0
 smpboot_thread_fn+0x255/0x440
 kthread+0x1f4/0x220
 ret_from_fork+0x27/0x50
Signed-off-by: Qian Cai <cai@lca.pw>
Tested-by: Borislav Petkov <bp@suse.de>
[ rjw: Subject ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Merge tag 'perf-urgent-for-mingo-5.7-20200403' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent

Pull perf/urgent fixes and improvements from Arnaldo Carvalho de Melo:

perf python:

  Arnaldo Carvalho de Melo:

  - Fix clang detection to strip out options passed in $CC.

build:

  He Zhe:

  - Normalize gcc parameter when generating arch errno table, fixing
    the build by removing options from $(CC).

  Sam Lunt:

  - Support Python 3.8+ in Makefile.

perf report/top:

  Arnaldo Carvalho de Melo:

  - Fix title line formatting.

perf script:

  Andreas Gerstmayr:

  - Fix SEGFAULT when using DWARF mode.

  - Fix invalid read of directory entry after closedir(), found with valgrind.

  Hagen Paul Pfeifer:

  - Introduce --deltatime option.

  Stephane Eranian:

  - Allow --symbol to accept hexadecimal addresses.

  Ian Rogers:

  - Add -S/--symbols documentation

  Namhyung Kim:

  - Add --show-cgroup-events option.

perf python:

  Arnaldo Carvalho de Melo:

  - Include rwsem.c in the python binding, needed by the cgroups improvements.

build-test:

  Arnaldo Carvalho de Melo:

  - Honour JOBS to override detection of number of cores

perf top:

  Jin Yao:

  - Support --group-sort-idx to change the sort order

  - perf top: Support hotkey to change sort order

perf pmu-events x86:

  Jin Yao:

  - Use CPU_CLK_UNHALTED.THREAD in Kernel_Utilization metric

perf symbols arm64:

  Kemeng Shi:

  - Fix arm64 gap between kernel start and module end

kernel perf subsystem:

  Namhyung Kim:

  - Add PERF_RECORD_CGROUP event and Add PERF_SAMPLE_CGROUP feature,
    to allow cgroup tracking, saving a link between cgroup path and
    its id number.

perf cgroup:

  Namhyung Kim:

  - Maintain cgroup hierarchy.

perf report:

  Namhyung Kim:

  - Add 'cgroup' sort key.

perf record:

  Namhyung Kim:

  - Support synthesizing cgroup events for pre-existing cgroups.

  - Add --all-cgroups option

Documentation:

  Tony Jones:

  - Update docs regarding kernel/user space unwinding.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Pull ARC updates from Vineet Gupta:

 - Support for DSP enabled userspace (save/restore regs)

 - Misc other platform fixes

* tag 'arc-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: allow userspace DSP applications to use AGU extensions
  ARC: add support for DSP-enabled userspace applications
  ARC: handle DSP presence in HW
  ARC: add helpers to sanitize config options
  ARC: [plat-axs10x]: PGU: remove unused encoder-slave property