Commits · 24319258660a84dd77f4be026a55b10a12524919 · nexedi / linux

11 Mar, 2019 11 commits

net/mlx5: Avoid panic when setting vport rate · 24319258

Tonghao Zhang authored Mar 04, 2019

If we try to set VFs rate on a VF (not PF) net device, the kernel
will be crash. The commands are show as below:

$ echo 2 > /sys/class/net/$MLX_PF0/device/sriov_numvfs
$ ip link set $MLX_VF0 vf 0 max_tx_rate 2 min_tx_rate 1

If not applied the first patch ("net/mlx5: Avoid panic when setting
vport mac, getting vport config"), the command:

$ ip link set $MLX_VF0 vf 0 rate 100

can also crash the kernel.

[ 1650.006388] RIP: 0010:mlx5_eswitch_set_vport_rate+0x1f/0x260 [mlx5_core]
[ 1650.007092]  do_setlink+0x982/0xd20
[ 1650.007129]  __rtnl_newlink+0x528/0x7d0
[ 1650.007374]  rtnl_newlink+0x43/0x60
[ 1650.007407]  rtnetlink_rcv_msg+0x2a2/0x320
[ 1650.007484]  netlink_rcv_skb+0xcb/0x100
[ 1650.007519]  netlink_unicast+0x17f/0x230
[ 1650.007554]  netlink_sendmsg+0x2d2/0x3d0
[ 1650.007592]  sock_sendmsg+0x36/0x50
[ 1650.007625]  ___sys_sendmsg+0x280/0x2a0
[ 1650.007963]  __sys_sendmsg+0x58/0xa0
[ 1650.007998]  do_syscall_64+0x5b/0x180
[ 1650.009438]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: c9497c98 ("net/mlx5: Add support for setting VF min rate")
Cc: Mohamad Haj Yahia <mohamad@mellanox.com>
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Acked-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

24319258

net/mlx5: Avoid panic when setting vport mac, getting vport config · 6e77c413

Tonghao Zhang authored Mar 04, 2019

If we try to set VFs mac address on a VF (not PF) net device,
the kernel will be crash. The commands are show as below:

$ echo 2 > /sys/class/net/$MLX_PF0/device/sriov_numvfs
$ ip link set $MLX_VF0 vf 0 mac 00:11:22:33:44:00

[exception RIP: mlx5_eswitch_set_vport_mac+41]
[ffffb8b7079e3688] do_setlink at ffffffff8f67f85b
[ffffb8b7079e37a8] __rtnl_newlink at ffffffff8f683778
[ffffb8b7079e3b68] rtnl_newlink at ffffffff8f683a63
[ffffb8b7079e3b90] rtnetlink_rcv_msg at ffffffff8f67d812
[ffffb8b7079e3c10] netlink_rcv_skb at ffffffff8f6b88ab
[ffffb8b7079e3c60] netlink_unicast at ffffffff8f6b808f
[ffffb8b7079e3ca0] netlink_sendmsg at ffffffff8f6b8412
[ffffb8b7079e3d18] sock_sendmsg at ffffffff8f6452f6
[ffffb8b7079e3d30] ___sys_sendmsg at ffffffff8f645860
[ffffb8b7079e3eb0] __sys_sendmsg at ffffffff8f647a38
[ffffb8b7079e3f38] do_syscall_64 at ffffffff8f00401b
[ffffb8b7079e3f50] entry_SYSCALL_64_after_hwframe at ffffffff8f80008c

and

[exception RIP: mlx5_eswitch_get_vport_config+12]
[ffffa70607e57678] mlx5e_get_vf_config at ffffffffc03c7f8f [mlx5_core]
[ffffa70607e57688] do_setlink at ffffffffbc67fa59
[ffffa70607e577a8] __rtnl_newlink at ffffffffbc683778
[ffffa70607e57b68] rtnl_newlink at ffffffffbc683a63
[ffffa70607e57b90] rtnetlink_rcv_msg at ffffffffbc67d812
[ffffa70607e57c10] netlink_rcv_skb at ffffffffbc6b88ab
[ffffa70607e57c60] netlink_unicast at ffffffffbc6b808f
[ffffa70607e57ca0] netlink_sendmsg at ffffffffbc6b8412
[ffffa70607e57d18] sock_sendmsg at ffffffffbc6452f6
[ffffa70607e57d30] ___sys_sendmsg at ffffffffbc645860
[ffffa70607e57eb0] __sys_sendmsg at ffffffffbc647a38
[ffffa70607e57f38] do_syscall_64 at ffffffffbc00401b
[ffffa70607e57f50] entry_SYSCALL_64_after_hwframe at ffffffffbc80008c

Fixes: a8d70a05 ("net/mlx5: E-Switch, Disallow vlan/spoofcheck setup if not being esw manager")
Cc: Eli Cohen <eli@mellanox.com>
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Acked-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

6e77c413

net/mlx5e: Fix access to non-existing receive queue · c475e11e

Tariq Toukan authored Mar 05, 2019

In case number of channels is changed while interface is down,
RSS indirection table is mistakenly not modified accordingly,
causing access to out-of-range non-existing object.

Fix by updating the RSS indireciton table also in the early
return flow of interface down.

Fixes: fb35c534 ("net/mlx5e: Fix NULL pointer derefernce in set channels error flow")
Fixes: bbeb53b8 ("net/mlx5e: Move RSS params to a dedicated struct")
Reported-by: Or Gerlitz <ogerlitz@mellanox.com>
Tested-by: Maria Pasechnik <mariap@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

c475e11e

net/mlx5e: IPoIB, Fix RX checksum statistics update · 3d6f3cdf

Feras Daoud authored Jan 14, 2019

Update the RX checksum only if the feature is enabled.

Fixes: 9d6bd752 ("net/mlx5e: IPoIB, RX handler")
Signed-off-by: Feras Daoud <ferasda@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

3d6f3cdf

net/mlx5: Remove redundant lag function to get pf num · 6ffb6303

Roi Dayan authored Feb 26, 2019

The function is not being used.
Signed-off-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

6ffb6303

net/mlx5e: Properly get the PF number phys port name ndo · 5b33eba9

Roi Dayan authored Feb 26, 2019

Currently, we fail to retrieve the PF number in some cases (e.g
single ported cards, lag capability), this further results in a
call trace issued by the rtnetlink code, since the error value
is not -EOPNOTSUPP. Change the implementation to be independent
from the lag code and function properly on both two ports and
single ported cards.

Call Trace:

[  194.525057] mlx5_core 0000:82:00.0: mlx5_lag_get_pf_num:605:(pid 837): no lag device, can't get pf num
[  194.525804] WARNING: CPU: 7 PID: 837 at net/core/rtnetlink.c:3457 rtmsg_ifinfo_build_skb+0x131/0x160
[  194.529952] CPU: 7 PID: 837 Comm: kworker/7:3 Tainted: G        W  O      5.0.0-rc7+ #3
[  194.531307] Workqueue: events linkwatch_event
[  194.531697] RIP: 0010:rtmsg_ifinfo_build_skb+0x131/0x160
[  194.545007] Call Trace:
[  194.545406]  rtmsg_ifinfo_event.part.29+0x1b/0xb0
[  194.545810]  rtmsg_ifinfo+0x51/0x80
[  194.546209]  netdev_state_change+0xc7/0x110
[  194.546608]  ? dev_valid_name+0x1b0/0x1b0
[  194.547010]  ? __local_bh_enable_ip+0xef/0x1d0
[  194.547411]  ? lockdep_hardirqs_on+0x3ea/0x560
[  194.547811]  ? linkwatch_do_dev+0x9b/0x100
[  194.548207]  linkwatch_do_dev+0x9b/0x100
[  194.548605]  __linkwatch_run_queue+0x244/0x430
[  194.549014]  ? linkwatch_schedule_work+0x100/0x100
[  194.549412]  ? lock_acquire+0x10f/0x2d0
[  194.549816]  linkwatch_event+0x3f/0x50
[  194.550212]  process_one_work+0x7d3/0x1460

Fixes: c12ecc23 ("net/mlx5e: Move to use common phys port names for vport representors")
Signed-off-by: Roi Dayan <roid@mellanox.com>
Acked-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

5b33eba9

net/mlx5: Consolidate update FTE for all removal changes · 718ce4d6

Eli Britstein authored Jan 08, 2019

With commit a18e879d ("net/mlx5e: Annul encap action ordering
requirement") and a use-case of e-switch remote mirroring, the
incremental/stepped FTE removal process done by the fs core got us to
illegal transient states and FW errors:

SET_FLOW_TABLE_ENTRY(0x936) op_mod(0x0) failed, status bad
parameter(0x3), syndrome (0x9c2e40)

To avoid that and improve FTE removal performance, aggregate the FTE's
updates that should be applied. Remove the FTE if it is empty, or apply
one FW update command with the aggregated updates.

Fixes: a18e879d ("net/mlx5e: Annul encap action ordering requirement")
Signed-off-by: Eli Britstein <elibr@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

718ce4d6

net/mlx5: Add a locked flag to node removal functions · 476d61b7

Eli Britstein authored Jan 31, 2019

Add a locked flag to the node removal functions to signal if the
parent is already locked from the caller function or not as a pre-step
towards outside lock. Currently always use false with no functional
change.
Signed-off-by: Eli Britstein <elibr@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

476d61b7

net/mlx5: Add modify FTE helper function · e7aafc8f

Eli Britstein authored Jan 08, 2019

Add modify FTE helper function and use it when deleting a rule, as a
pre-step towards consolidated FTE modification, with no functional
change.
Signed-off-by: Eli Britstein <elibr@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

e7aafc8f

net/mlx5: Fix multiple updates of steering rules in parallel · 6237634d

Eli Britstein authored Jan 31, 2019

There might be a condition where the fte found is not active yet. In
this case we should not use it, but continue to search for another, or
allocate a new one.

Fixes: bd71b08e ("net/mlx5: Support multiple updates of steering rules in parallel")
Signed-off-by: Eli Britstein <elibr@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

6237634d

net: sit: fix UBSAN Undefined behaviour in check_6rd · a843dc4e

Miaohe Lin authored Mar 11, 2019

In func check_6rd,tunnel->ip6rd.relay_prefixlen may equal to
32,so UBSAN complain about it.

UBSAN: Undefined behaviour in net/ipv6/sit.c:781:47
shift exponent 32 is too large for 32-bit type 'unsigned int'
CPU: 6 PID: 20036 Comm: syz-executor.0 Not tainted 4.19.27 #2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1
04/01/2014
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0xca/0x13e lib/dump_stack.c:113
ubsan_epilogue+0xe/0x81 lib/ubsan.c:159
__ubsan_handle_shift_out_of_bounds+0x293/0x2e8 lib/ubsan.c:425
check_6rd.constprop.9+0x433/0x4e0 net/ipv6/sit.c:781
try_6rd net/ipv6/sit.c:806 [inline]
ipip6_tunnel_xmit net/ipv6/sit.c:866 [inline]
sit_tunnel_xmit+0x141c/0x2720 net/ipv6/sit.c:1033
__netdev_start_xmit include/linux/netdevice.h:4300 [inline]
netdev_start_xmit include/linux/netdevice.h:4309 [inline]
xmit_one net/core/dev.c:3243 [inline]
dev_hard_start_xmit+0x17c/0x780 net/core/dev.c:3259
__dev_queue_xmit+0x1656/0x2500 net/core/dev.c:3829
neigh_output include/net/neighbour.h:501 [inline]
ip6_finish_output2+0xa36/0x2290 net/ipv6/ip6_output.c:120
ip6_finish_output+0x3e7/0xa20 net/ipv6/ip6_output.c:154
NF_HOOK_COND include/linux/netfilter.h:278 [inline]
ip6_output+0x1e2/0x720 net/ipv6/ip6_output.c:171
dst_output include/net/dst.h:444 [inline]
ip6_local_out+0x99/0x170 net/ipv6/output_core.c:176
ip6_send_skb+0x9d/0x2f0 net/ipv6/ip6_output.c:1697
ip6_push_pending_frames+0xc0/0x100 net/ipv6/ip6_output.c:1717
rawv6_push_pending_frames net/ipv6/raw.c:616 [inline]
rawv6_sendmsg+0x2435/0x3530 net/ipv6/raw.c:946
inet_sendmsg+0xf8/0x5c0 net/ipv4/af_inet.c:798
sock_sendmsg_nosec net/socket.c:621 [inline]
sock_sendmsg+0xc8/0x110 net/socket.c:631
___sys_sendmsg+0x6cf/0x890 net/socket.c:2114
__sys_sendmsg+0xf0/0x1b0 net/socket.c:2152
do_syscall_64+0xc8/0x580 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Signed-off-by: linmiaohe <linmiaohe@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

a843dc4e

10 Mar, 2019 7 commits

gro_cells: make sure device is up in gro_cells_receive() · 2a5ff07a

Eric Dumazet authored Mar 10, 2019

We keep receiving syzbot reports [1] that show that tunnels do not play
the rcu/IFF_UP rules properly.

At device dismantle phase, gro_cells_destroy() will be called
only after a full rcu grace period is observed after IFF_UP
has been cleared.

This means that IFF_UP needs to be tested before queueing packets
into netif_rx() or gro_cells.

This patch implements the test in gro_cells_receive() because
too many callers do not seem to bother enough.

[1]
BUG: unable to handle kernel paging request at fffff4ca0b9ffffe
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP KASAN
CPU: 0 PID: 21 Comm: kworker/u4:1 Not tainted 5.0.0+ #97
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: netns cleanup_net
RIP: 0010:__skb_unlink include/linux/skbuff.h:1929 [inline]
RIP: 0010:__skb_dequeue include/linux/skbuff.h:1945 [inline]
RIP: 0010:__skb_queue_purge include/linux/skbuff.h:2656 [inline]
RIP: 0010:gro_cells_destroy net/core/gro_cells.c:89 [inline]
RIP: 0010:gro_cells_destroy+0x19d/0x360 net/core/gro_cells.c:78
Code: 03 42 80 3c 20 00 0f 85 53 01 00 00 48 8d 7a 08 49 8b 47 08 49 c7 07 00 00 00 00 48 89 f9 49 c7 47 08 00 00 00 00 48 c1 e9 03 <42> 80 3c 21 00 0f 85 10 01 00 00 48 89 c1 48 89 42 08 48 c1 e9 03
RSP: 0018:ffff8880aa3f79a8 EFLAGS: 00010a02
RAX: 00ffffffffffffe8 RBX: ffffe8ffffc64b70 RCX: 1ffff8ca0b9ffffe
RDX: ffffc6505cffffe8 RSI: ffffffff858410ca RDI: ffffc6505cfffff0
RBP: ffff8880aa3f7a08 R08: ffff8880aa3e8580 R09: fffffbfff1263645
R10: fffffbfff1263644 R11: ffffffff8931b223 R12: dffffc0000000000
R13: 0000000000000000 R14: ffffe8ffffc64b80 R15: ffffe8ffffc64b75
kobject: 'loop2' (000000004bd7d84a): kobject_uevent_env
FS:  0000000000000000(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: fffff4ca0b9ffffe CR3: 0000000094941000 CR4: 00000000001406f0
Call Trace:
kobject: 'loop2' (000000004bd7d84a): fill_kobj_path: path = '/devices/virtual/block/loop2'
 ip_tunnel_dev_free+0x19/0x60 net/ipv4/ip_tunnel.c:1010
 netdev_run_todo+0x51c/0x7d0 net/core/dev.c:8970
 rtnl_unlock+0xe/0x10 net/core/rtnetlink.c:116
 ip_tunnel_delete_nets+0x423/0x5f0 net/ipv4/ip_tunnel.c:1124
 vti_exit_batch_net+0x23/0x30 net/ipv4/ip_vti.c:495
 ops_exit_list.isra.0+0x105/0x160 net/core/net_namespace.c:156
 cleanup_net+0x3fb/0x960 net/core/net_namespace.c:551
 process_one_work+0x98e/0x1790 kernel/workqueue.c:2173
 worker_thread+0x98/0xe40 kernel/workqueue.c:2319
 kthread+0x357/0x430 kernel/kthread.c:246
 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352
Modules linked in:
CR2: fffff4ca0b9ffffe
   [ end trace 513fc9c1338d1cb3 ]
RIP: 0010:__skb_unlink include/linux/skbuff.h:1929 [inline]
RIP: 0010:__skb_dequeue include/linux/skbuff.h:1945 [inline]
RIP: 0010:__skb_queue_purge include/linux/skbuff.h:2656 [inline]
RIP: 0010:gro_cells_destroy net/core/gro_cells.c:89 [inline]
RIP: 0010:gro_cells_destroy+0x19d/0x360 net/core/gro_cells.c:78
Code: 03 42 80 3c 20 00 0f 85 53 01 00 00 48 8d 7a 08 49 8b 47 08 49 c7 07 00 00 00 00 48 89 f9 49 c7 47 08 00 00 00 00 48 c1 e9 03 <42> 80 3c 21 00 0f 85 10 01 00 00 48 89 c1 48 89 42 08 48 c1 e9 03
RSP: 0018:ffff8880aa3f79a8 EFLAGS: 00010a02
RAX: 00ffffffffffffe8 RBX: ffffe8ffffc64b70 RCX: 1ffff8ca0b9ffffe
RDX: ffffc6505cffffe8 RSI: ffffffff858410ca RDI: ffffc6505cfffff0
RBP: ffff8880aa3f7a08 R08: ffff8880aa3e8580 R09: fffffbfff1263645
R10: fffffbfff1263644 R11: ffffffff8931b223 R12: dffffc0000000000
kobject: 'loop3' (00000000e4ee57a6): kobject_uevent_env
R13: 0000000000000000 R14: ffffe8ffffc64b80 R15: ffffe8ffffc64b75
FS:  0000000000000000(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: fffff4ca0b9ffffe CR3: 0000000094941000 CR4: 00000000001406f0

Fixes: c9e6bc64 ("net: add gro_cells infrastructure")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

2a5ff07a

vxlan: test dev->flags & IFF_UP before calling gro_cells_receive() · 59cbf56f

Eric Dumazet authored Mar 10, 2019

Same reasons than the ones explained in commit 4179cb5a
("vxlan: test dev->flags & IFF_UP before calling netif_rx()")

netif_rx() or gro_cells_receive() must be called under a strict contract.

At device dismantle phase, core networking clears IFF_UP
and flush_all_backlogs() is called after rcu grace period
to make sure no incoming packet might be in a cpu backlog
and still referencing the device.

A similar protocol is used for gro_cells infrastructure, as
gro_cells_destroy() will be called only after a full rcu
grace period is observed after IFF_UP has been cleared.

Most drivers call netif_rx() from their interrupt handler,
and since the interrupts are disabled at device dismantle,
netif_rx() does not have to check dev->flags & IFF_UP

Virtual drivers do not have this guarantee, and must
therefore make the check themselves.

Otherwise we risk use-after-free and/or crashes.

Fixes: d342894c ("vxlan: virtual extensible lan")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

59cbf56f

net/x25: fix use-after-free in x25_device_event() · 95d6ebd5

Eric Dumazet authored Mar 10, 2019

In case of failure x25_connect() does a x25_neigh_put(x25->neighbour)
but forgets to clear x25->neighbour pointer, thus triggering use-after-free.

Since the socket is visible in x25_list, we need to hold x25_list_lock
to protect the operation.

syzbot report :

BUG: KASAN: use-after-free in x25_kill_by_device net/x25/af_x25.c:217 [inline]
BUG: KASAN: use-after-free in x25_device_event+0x296/0x2b0 net/x25/af_x25.c:252
Read of size 8 at addr ffff8880a030edd0 by task syz-executor003/7854

CPU: 0 PID: 7854 Comm: syz-executor003 Not tainted 5.0.0+ #97
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x172/0x1f0 lib/dump_stack.c:113
 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:187
 kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317
 __asan_report_load8_noabort+0x14/0x20 mm/kasan/generic_report.c:135
 x25_kill_by_device net/x25/af_x25.c:217 [inline]
 x25_device_event+0x296/0x2b0 net/x25/af_x25.c:252
 notifier_call_chain+0xc7/0x240 kernel/notifier.c:93
 __raw_notifier_call_chain kernel/notifier.c:394 [inline]
 raw_notifier_call_chain+0x2e/0x40 kernel/notifier.c:401
 call_netdevice_notifiers_info+0x3f/0x90 net/core/dev.c:1739
 call_netdevice_notifiers_extack net/core/dev.c:1751 [inline]
 call_netdevice_notifiers net/core/dev.c:1765 [inline]
 __dev_notify_flags+0x1e9/0x2c0 net/core/dev.c:7607
 dev_change_flags+0x10d/0x170 net/core/dev.c:7643
 dev_ifsioc+0x2b0/0x940 net/core/dev_ioctl.c:237
 dev_ioctl+0x1b8/0xc70 net/core/dev_ioctl.c:488
 sock_do_ioctl+0x1bd/0x300 net/socket.c:995
 sock_ioctl+0x32b/0x610 net/socket.c:1096
 vfs_ioctl fs/ioctl.c:46 [inline]
 file_ioctl fs/ioctl.c:509 [inline]
 do_vfs_ioctl+0xd6e/0x1390 fs/ioctl.c:696
 ksys_ioctl+0xab/0xd0 fs/ioctl.c:713
 __do_sys_ioctl fs/ioctl.c:720 [inline]
 __se_sys_ioctl fs/ioctl.c:718 [inline]
 __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:718
 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x4467c9
Code: e8 0c e8 ff ff 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 5b 07 fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007fdbea222d98 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00000000006dbc58 RCX: 00000000004467c9
RDX: 0000000020000340 RSI: 0000000000008914 RDI: 0000000000000003
RBP: 00000000006dbc50 R08: 00007fdbea223700 R09: 0000000000000000
R10: 00007fdbea223700 R11: 0000000000000246 R12: 00000000006dbc5c
R13: 6000030030626669 R14: 0000000000000000 R15: 0000000030626669

Allocated by task 7843:
 save_stack+0x45/0xd0 mm/kasan/common.c:73
 set_track mm/kasan/common.c:85 [inline]
 __kasan_kmalloc mm/kasan/common.c:495 [inline]
 __kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:468
 kasan_kmalloc+0x9/0x10 mm/kasan/common.c:509
 kmem_cache_alloc_trace+0x151/0x760 mm/slab.c:3615
 kmalloc include/linux/slab.h:545 [inline]
 x25_link_device_up+0x46/0x3f0 net/x25/x25_link.c:249
 x25_device_event+0x116/0x2b0 net/x25/af_x25.c:242
 notifier_call_chain+0xc7/0x240 kernel/notifier.c:93
 __raw_notifier_call_chain kernel/notifier.c:394 [inline]
 raw_notifier_call_chain+0x2e/0x40 kernel/notifier.c:401
 call_netdevice_notifiers_info+0x3f/0x90 net/core/dev.c:1739
 call_netdevice_notifiers_extack net/core/dev.c:1751 [inline]
 call_netdevice_notifiers net/core/dev.c:1765 [inline]
 __dev_notify_flags+0x121/0x2c0 net/core/dev.c:7605
 dev_change_flags+0x10d/0x170 net/core/dev.c:7643
 dev_ifsioc+0x2b0/0x940 net/core/dev_ioctl.c:237
 dev_ioctl+0x1b8/0xc70 net/core/dev_ioctl.c:488
 sock_do_ioctl+0x1bd/0x300 net/socket.c:995
 sock_ioctl+0x32b/0x610 net/socket.c:1096
 vfs_ioctl fs/ioctl.c:46 [inline]
 file_ioctl fs/ioctl.c:509 [inline]
 do_vfs_ioctl+0xd6e/0x1390 fs/ioctl.c:696
 ksys_ioctl+0xab/0xd0 fs/ioctl.c:713
 __do_sys_ioctl fs/ioctl.c:720 [inline]
 __se_sys_ioctl fs/ioctl.c:718 [inline]
 __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:718
 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Freed by task 7865:
 save_stack+0x45/0xd0 mm/kasan/common.c:73
 set_track mm/kasan/common.c:85 [inline]
 __kasan_slab_free+0x102/0x150 mm/kasan/common.c:457
 kasan_slab_free+0xe/0x10 mm/kasan/common.c:465
 __cache_free mm/slab.c:3494 [inline]
 kfree+0xcf/0x230 mm/slab.c:3811
 x25_neigh_put include/net/x25.h:253 [inline]
 x25_connect+0x8d8/0xde0 net/x25/af_x25.c:824
 __sys_connect+0x266/0x330 net/socket.c:1685
 __do_sys_connect net/socket.c:1696 [inline]
 __se_sys_connect net/socket.c:1693 [inline]
 __x64_sys_connect+0x73/0xb0 net/socket.c:1693
 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

The buggy address belongs to the object at ffff8880a030edc0
 which belongs to the cache kmalloc-256 of size 256
The buggy address is located 16 bytes inside of
 256-byte region [ffff8880a030edc0, ffff8880a030eec0)
The buggy address belongs to the page:
page:ffffea000280c380 count:1 mapcount:0 mapping:ffff88812c3f07c0 index:0x0
flags: 0x1fffc0000000200(slab)
raw: 01fffc0000000200 ffffea0002806788 ffffea00027f0188 ffff88812c3f07c0
raw: 0000000000000000 ffff8880a030e000 000000010000000c 0000000000000000
page dumped because: kasan: bad access detected
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot+04babcefcd396fabec37@syzkaller.appspotmail.com
Cc: andrew hendry <andrew.hendry@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

95d6ebd5

isdn: mISDNinfineon: fix potential NULL pointer dereference · d721fe99

Kangjie Lu authored Mar 08, 2019

In case ioremap fails, the fix returns -ENOMEM to avoid NULL
pointer dereference.
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>

d721fe99

net: hns3: fix to stop multiple HNS reset due to the AER changes · 69b51bbb

Shiju Jose authored Mar 10, 2019

The commit bfcb79fc
("PCI/ERR: Run error recovery callbacks for all affected devices")
affected the non-fatal error recovery logic for the HNS and RDMA devices.
This is because each HNS PF under PCIe bus receive callbacks
from the AER driver when an error is reported for one of the PF.
This causes unwanted PF resets because
the HNS decides which PF to reset based on the reset type set.
The HNS error handling code sets the reset type based on the hw error
type detected.

This patch provides fix for the above issue for the recovery of
the hw errors in the HNS and RDMA devices.

This patch needs backporting to the kernel v5.0+

Fixes: 332fbf57 ("net: hns3: add handling of hw ras errors using new set of commands")
Reported-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

69b51bbb

ip: fix ip_mc_may_pull() return value · 083b78a9

Eric Dumazet authored Mar 09, 2019

ip_mc_may_pull() must return 0 if there is a problem, not an errno.

syzbot reported :

BUG: KASAN: use-after-free in br_ip4_multicast_igmp3_report net/bridge/br_multicast.c:947 [inline]
BUG: KASAN: use-after-free in br_multicast_ipv4_rcv net/bridge/br_multicast.c:1631 [inline]
BUG: KASAN: use-after-free in br_multicast_rcv+0x3cd8/0x4440 net/bridge/br_multicast.c:1741
Read of size 4 at addr ffff88820a4084ee by task syz-executor.2/11183

CPU: 1 PID: 11183 Comm: syz-executor.2 Not tainted 5.0.0+ #14
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x172/0x1f0 lib/dump_stack.c:113
 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:187
 kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317
 __asan_report_load4_noabort+0x14/0x20 mm/kasan/generic_report.c:131
 br_ip4_multicast_igmp3_report net/bridge/br_multicast.c:947 [inline]
 br_multicast_ipv4_rcv net/bridge/br_multicast.c:1631 [inline]
 br_multicast_rcv+0x3cd8/0x4440 net/bridge/br_multicast.c:1741
 br_handle_frame_finish+0xa3a/0x14c0 net/bridge/br_input.c:108
 br_nf_hook_thresh+0x2ec/0x380 net/bridge/br_netfilter_hooks.c:1005
 br_nf_pre_routing_finish+0x8e2/0x1750 net/bridge/br_netfilter_hooks.c:410
 NF_HOOK include/linux/netfilter.h:289 [inline]
 NF_HOOK include/linux/netfilter.h:283 [inline]
 br_nf_pre_routing+0x7e7/0x13a0 net/bridge/br_netfilter_hooks.c:506
 nf_hook_entry_hookfn include/linux/netfilter.h:119 [inline]
 nf_hook_slow+0xbf/0x1f0 net/netfilter/core.c:511
 nf_hook include/linux/netfilter.h:244 [inline]
 NF_HOOK include/linux/netfilter.h:287 [inline]
 br_handle_frame+0x95b/0x1450 net/bridge/br_input.c:305
 __netif_receive_skb_core+0xa96/0x3040 net/core/dev.c:4902
 __netif_receive_skb_one_core+0xa8/0x1a0 net/core/dev.c:4971
 __netif_receive_skb+0x2c/0x1c0 net/core/dev.c:5083
 netif_receive_skb_internal+0x117/0x660 net/core/dev.c:5186
 netif_receive_skb+0x6e/0x5a0 net/core/dev.c:5261

Fixes: ba5ea614 ("bridge: simplify ip_mc_check_igmp() and ipv6_mc_check_mld() calls")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: David S. Miller <davem@davemloft.net>

083b78a9

net: keep refcount warning in reqsk_free() · 1039c6e1

Guillaume Nault authored Mar 09, 2019

As Eric Dumazet said, "We do not have a way to tell if the req was ever
inserted in a hash table, so better play safe.".
Let's remove this comment, so that nobody will be tempted to drop the
WARN_ON_ONCE() line.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1039c6e1

09 Mar, 2019 5 commits

net: stmmac: Avoid one more sometimes uninitialized Clang warning · 1f5d861f

Nathan Chancellor authored Mar 07, 2019

When building with -Wsometimes-uninitialized, Clang warns:

drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c:111:2: error: variable
'ns' is used uninitialized whenever 'if' condition is false
[-Werror,-Wsometimes-uninitialized]
drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c:111:2: error: variable
'ns' is used uninitialized whenever '&&' condition is false
[-Werror,-Wsometimes-uninitialized]

Clang is concerned with the use of stmmac_do_void_callback (which
stmmac_get_systime wraps), as it may fail to initialize these values if
the if condition was ever false (meaning the callback doesn't exist).
It's not wrong because the callback is what initializes ns. While it's
unlikely that the callback is going to disappear at some point and make
that condition false, we can easily avoid this warning by zero
initializing the variable.

Link: https://github.com/ClangBuiltLinux/linux/issues/384
Fixes: df103170 ("net: stmmac: Avoid sometimes uninitialized Clang warnings")
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1f5d861f

net: dsa: mv88e6xxx: Set correct interface mode for CPU/DSA ports · 7cbbee05

Andrew Lunn authored Mar 08, 2019

By default, the switch driver is expected to configure CPU and DSA
ports to their maximum speed. For the 6341 and 6390 families, the
ports interface mode has to be configured as well. The 6390X range
support 10G ports using XAUI, while the 6341 and 6390 supports
2500BaseX, as their maximum speed.

Fixes: 787799a9 ("net: dsa: mv88e6xxx: Default ports 9/10 6390X CMODE to 1000BaseX")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

7cbbee05

rxrpc: Fix client call queueing, waiting for channel · 69ffaebb

David Howells authored Mar 09, 2019

rxrpc_get_client_conn() adds a new call to the front of the waiting_calls
queue if the connection it's going to use already exists. This is bad as
it allows calls to get starved out.

Fix this by adding to the tail instead.

Also change the other enqueue point in the same function to put it on the
front (ie. when we have a new connection). This makes the point that in
the case of a new connection the new call goes at the front (though it
doesn't actually matter since the queue should be unoccupied).

Fixes: 45025bce ("rxrpc: Improve management and caching of client connection objects")
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

69ffaebb

Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf · c3ad3eca

David S. Miller authored Mar 08, 2019

Daniel Borkmann says:

====================
pull-request: bpf 2019-03-09

The following pull-request contains BPF updates for your *net* tree.

The main changes are:

1) Fix a crash in AF_XDP's xsk_diag_put_ring() which was passing
   wrong queue argument, from Eric.

2) Fix a regression due to wrong test for TCP GSO packets used in
   various BPF helpers like NAT64, from Willem.

3) Fix a sk_msg strparser warning which asserts that strparser must
   be stopped first, from Jakub.

4) Fix rejection of invalid options/bind flags in AF_XDP, from Björn.

5) Fix GSO in bpf_lwt_push_ip_encap() which must properly set inner
   headers and inner protocol, from Peter.

6) Fix a libbpf leak when kernel does not support BTF, from Nikita.

7) Various BPF selftest and libbpf build fixes to make out-of-tree
   compilation work and to properly resolve dependencies via fixdep
   target, from Stanislav.

8) Fix rejection of invalid ldimm64 imm field, from Daniel.

9) Fix bpf stats sysctl compile warning of unused helper function
   proc_dointvec_minmax_bpf_stats() under some configs, from Arnd.

10) Fix couple of warnings about using plain integer as NULL, from Bo.

11) Fix some BPF sample spelling mistakes, from Colin.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

c3ad3eca

tcp: handle inet_csk_reqsk_queue_add() failures · 9d3e1368

Guillaume Nault authored Mar 08, 2019

Commit 7716682c ("tcp/dccp: fix another race at listener
dismantle") let inet_csk_reqsk_queue_add() fail, and adjusted
{tcp,dccp}_check_req() accordingly. However, TFO and syncookies
weren't modified, thus leaking allocated resources on error.

Contrary to tcp_check_req(), in both syncookies and TFO cases,
we need to drop the request socket. Also, since the child socket is
created with inet_csk_clone_lock(), we have to unlock it and drop an
extra reference (->sk_refcount is initially set to 2 and
inet_csk_reqsk_queue_add() drops only one ref).

For TFO, we also need to revert the work done by tcp_try_fastopen()
(with reqsk_fastopen_remove()).

Fixes: 7716682c ("tcp/dccp: fix another race at listener dismantle")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9d3e1368

08 Mar, 2019 17 commits

net: ethernet: sun: Zero initialize class in default case in niu_add_ethtool_tcam_entry · 09073525

Nathan Chancellor authored Mar 07, 2019

When building with -Wsometimes-uninitialized, Clang warns:

drivers/net/ethernet/sun/niu.c:7466:5: warning: variable 'class' is used
uninitialized whenever switch default is taken
[-Wsometimes-uninitialized]

The default case can never happen because i can only be 0 to 3
(NIU_L3_PROG_CLS is defined as 4). To make this clear to Clang,
just zero initialize class in the default case (use the macro
CLASS_CODE_UNRECOG to make it clear this shouldn't happen).

Link: https://github.com/ClangBuiltLinux/linux/issues/403Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

09073525

8139too : Add support for U.S. Robotics USR997901A 10/100 Cardbus NIC · 580411d0

Matthew Whitehead authored Mar 06, 2019

Add PCI vendor and device identifier for U.S. Robotics USR997901A
10/100 Cardbus NIC. Tested on real hardware.
Signed-off-by: Matthew Whitehead <tedheadster@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

580411d0

fou, fou6: avoid uninit-value in gue_err() and gue6_err() · 5355ed63

Eric Dumazet authored Mar 06, 2019

My prior commit missed the fact that these functions
were using udp_hdr() (aka skb_transport_header())
to get access to GUE header.

Since pskb_transport_may_pull() does not exist yet, we have to add
transport_offset to our pskb_may_pull() calls.

BUG: KMSAN: uninit-value in gue_err+0x514/0xfa0 net/ipv4/fou.c:1032
CPU: 1 PID: 10648 Comm: syz-executor.1 Not tainted 5.0.0+ #11
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 <IRQ>
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x173/0x1d0 lib/dump_stack.c:113
 kmsan_report+0x12e/0x2a0 mm/kmsan/kmsan.c:600
 __msan_warning+0x82/0xf0 mm/kmsan/kmsan_instr.c:313
 gue_err+0x514/0xfa0 net/ipv4/fou.c:1032
 __udp4_lib_err_encap_no_sk net/ipv4/udp.c:571 [inline]
 __udp4_lib_err_encap net/ipv4/udp.c:626 [inline]
 __udp4_lib_err+0x12e6/0x1d40 net/ipv4/udp.c:665
 udp_err+0x74/0x90 net/ipv4/udp.c:737
 icmp_socket_deliver net/ipv4/icmp.c:767 [inline]
 icmp_unreach+0xb65/0x1070 net/ipv4/icmp.c:884
 icmp_rcv+0x11a1/0x1950 net/ipv4/icmp.c:1066
 ip_protocol_deliver_rcu+0x584/0xbb0 net/ipv4/ip_input.c:208
 ip_local_deliver_finish net/ipv4/ip_input.c:234 [inline]
 NF_HOOK include/linux/netfilter.h:289 [inline]
 ip_local_deliver+0x624/0x7b0 net/ipv4/ip_input.c:255
 dst_input include/net/dst.h:450 [inline]
 ip_rcv_finish net/ipv4/ip_input.c:414 [inline]
 NF_HOOK include/linux/netfilter.h:289 [inline]
 ip_rcv+0x6bd/0x740 net/ipv4/ip_input.c:524
 __netif_receive_skb_one_core net/core/dev.c:4973 [inline]
 __netif_receive_skb net/core/dev.c:5083 [inline]
 process_backlog+0x756/0x10e0 net/core/dev.c:5923
 napi_poll net/core/dev.c:6346 [inline]
 net_rx_action+0x78b/0x1a60 net/core/dev.c:6412
 __do_softirq+0x53f/0x93a kernel/softirq.c:293
 invoke_softirq kernel/softirq.c:375 [inline]
 irq_exit+0x214/0x250 kernel/softirq.c:416
 exiting_irq+0xe/0x10 arch/x86/include/asm/apic.h:536
 smp_apic_timer_interrupt+0x48/0x70 arch/x86/kernel/apic/apic.c:1064
 apic_timer_interrupt+0x2e/0x40 arch/x86/entry/entry_64.S:814
 </IRQ>
RIP: 0010:finish_lock_switch+0x2b/0x40 kernel/sched/core.c:2597
Code: 48 89 e5 53 48 89 fb e8 63 e7 95 00 8b b8 88 0c 00 00 48 8b 00 48 85 c0 75 12 48 89 df e8 dd db 95 00 c6 00 00 c6 03 00 fb 5b <5d> c3 e8 4e e6 95 00 eb e7 66 90 66 2e 0f 1f 84 00 00 00 00 00 55
RSP: 0018:ffff888081a0fc80 EFLAGS: 00000296 ORIG_RAX: ffffffffffffff13
RAX: ffff88821fd6bd80 RBX: ffff888027898000 RCX: ccccccccccccd000
RDX: ffff88821fca8d80 RSI: ffff888000000000 RDI: 00000000000004a0
RBP: ffff888081a0fc80 R08: 0000000000000002 R09: ffff888081a0fb08
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000001
R13: ffff88811130e388 R14: ffff88811130da00 R15: ffff88812fdb7d80
 finish_task_switch+0xfc/0x2d0 kernel/sched/core.c:2698
 context_switch kernel/sched/core.c:2851 [inline]
 __schedule+0x6cc/0x800 kernel/sched/core.c:3491
 schedule+0x15b/0x240 kernel/sched/core.c:3535
 freezable_schedule include/linux/freezer.h:172 [inline]
 do_nanosleep+0x2ba/0x980 kernel/time/hrtimer.c:1679
 hrtimer_nanosleep kernel/time/hrtimer.c:1733 [inline]
 __do_sys_nanosleep kernel/time/hrtimer.c:1767 [inline]
 __se_sys_nanosleep+0x746/0x960 kernel/time/hrtimer.c:1754
 __x64_sys_nanosleep+0x3e/0x60 kernel/time/hrtimer.c:1754
 do_syscall_64+0xbc/0xf0 arch/x86/entry/common.c:291
 entry_SYSCALL_64_after_hwframe+0x63/0xe7
RIP: 0033:0x4855a0
Code: 00 00 48 c7 c0 d4 ff ff ff 64 c7 00 16 00 00 00 31 c0 eb be 66 0f 1f 44 00 00 83 3d b1 11 5d 00 00 75 14 b8 23 00 00 00 0f 05 <48> 3d 01 f0 ff ff 0f 83 04 e2 f8 ff c3 48 83 ec 08 e8 3a 55 fd ff
RSP: 002b:0000000000a4fd58 EFLAGS: 00000246 ORIG_RAX: 0000000000000023
RAX: ffffffffffffffda RBX: 0000000000085780 RCX: 00000000004855a0
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000a4fd60
RBP: 00000000000007ec R08: 0000000000000001 R09: 0000000000ceb940
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000008
R13: 0000000000a4fdb0 R14: 0000000000085711 R15: 0000000000a4fdc0

Uninit was created at:
 kmsan_save_stack_with_flags mm/kmsan/kmsan.c:205 [inline]
 kmsan_internal_poison_shadow+0x92/0x150 mm/kmsan/kmsan.c:159
 kmsan_kmalloc+0xa6/0x130 mm/kmsan/kmsan_hooks.c:176
 kmsan_slab_alloc+0xe/0x10 mm/kmsan/kmsan_hooks.c:185
 slab_post_alloc_hook mm/slab.h:445 [inline]
 slab_alloc_node mm/slub.c:2773 [inline]
 __kmalloc_node_track_caller+0xe9e/0xff0 mm/slub.c:4398
 __kmalloc_reserve net/core/skbuff.c:140 [inline]
 __alloc_skb+0x309/0xa20 net/core/skbuff.c:208
 alloc_skb include/linux/skbuff.h:1012 [inline]
 alloc_skb_with_frags+0x186/0xa60 net/core/skbuff.c:5287
 sock_alloc_send_pskb+0xafd/0x10a0 net/core/sock.c:2091
 sock_alloc_send_skb+0xca/0xe0 net/core/sock.c:2108
 __ip_append_data+0x34cd/0x5000 net/ipv4/ip_output.c:998
 ip_append_data+0x324/0x480 net/ipv4/ip_output.c:1220
 icmp_push_reply+0x23d/0x7e0 net/ipv4/icmp.c:375
 __icmp_send+0x2ea3/0x30f0 net/ipv4/icmp.c:737
 icmp_send include/net/icmp.h:47 [inline]
 ipv4_link_failure+0x6d/0x230 net/ipv4/route.c:1190
 dst_link_failure include/net/dst.h:427 [inline]
 arp_error_report+0x106/0x1a0 net/ipv4/arp.c:297
 neigh_invalidate+0x359/0x8e0 net/core/neighbour.c:992
 neigh_timer_handler+0xdf2/0x1280 net/core/neighbour.c:1078
 call_timer_fn+0x285/0x600 kernel/time/timer.c:1325
 expire_timers kernel/time/timer.c:1362 [inline]
 __run_timers+0xdb4/0x11d0 kernel/time/timer.c:1681
 run_timer_softirq+0x2e/0x50 kernel/time/timer.c:1694
 __do_softirq+0x53f/0x93a kernel/softirq.c:293

Fixes: 26fc181e ("fou, fou6: do not assume linear skbs")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Stefano Brivio <sbrivio@redhat.com>
Cc: Sabrina Dubroca <sd@queasysnail.net>
Acked-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

5355ed63

net: sched: fix potential use-after-free in __tcf_chain_put() · b62989fc

Vlad Buslov authored Mar 06, 2019

When used with unlocked classifier that have filters attached to actions
with goto chain, __tcf_chain_put() for last non action reference can race
with calls to same function from action cleanup code that releases last
action reference. In this case action cleanup handler could free the chain
if it executes after all references to chain were released, but before all
concurrent users finished using it. Modify __tcf_chain_put() to only access
tcf_chain fields when holding block->lock. Remove local variables that were
used to cache some tcf_chain fields and are no longer needed because their
values can now be obtained directly from chain under block->lock
protection.

Fixes: 726d0612 ("net: sched: prevent insertion of new classifiers during chain flush")
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

b62989fc

vhost: silence an unused-variable warning · 81bf7bbe

Arnd Bergmann authored Mar 06, 2019

On some architectures, the MMU can be disabled, leading to access_ok()
becoming an empty macro that does not evaluate its size argument,
which in turn produces an unused-variable warning:

drivers/vhost/vhost.c:1191:9: error: unused variable 's' [-Werror,-Wunused-variable]
        size_t s = vhost_has_feature(vq, VIRTIO_RING_F_EVENT_IDX) ? 2 : 0;

Mark the variable as __maybe_unused to shut up that warning.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

81bf7bbe

vsock/virtio: fix kernel panic from virtio_transport_reset_no_sock · 4c404ce2

Adalbert Lazăr authored Mar 06, 2019

Previous to commit 22b5c0b6 ("vsock/virtio: fix kernel panic
after device hot-unplug"), vsock_core_init() was called from
virtio_vsock_probe(). Now, virtio_transport_reset_no_sock() can be called
before vsock_core_init() has the chance to run.

[Wed Feb 27 14:17:09 2019] BUG: unable to handle kernel NULL pointer dereference at 0000000000000110
[Wed Feb 27 14:17:09 2019] #PF error: [normal kernel read fault]
[Wed Feb 27 14:17:09 2019] PGD 0 P4D 0
[Wed Feb 27 14:17:09 2019] Oops: 0000 [#1] SMP PTI
[Wed Feb 27 14:17:09 2019] CPU: 3 PID: 59 Comm: kworker/3:1 Not tainted 5.0.0-rc7-390-generic-hvi #390
[Wed Feb 27 14:17:09 2019] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
[Wed Feb 27 14:17:09 2019] Workqueue: virtio_vsock virtio_transport_rx_work [vmw_vsock_virtio_transport]
[Wed Feb 27 14:17:09 2019] RIP: 0010:virtio_transport_reset_no_sock+0x8c/0xc0 [vmw_vsock_virtio_transport_common]
[Wed Feb 27 14:17:09 2019] Code: 35 8b 4f 14 48 8b 57 08 31 f6 44 8b 4f 10 44 8b 07 48 8d 7d c8 e8 84 f8 ff ff 48 85 c0 48 89 c3 74 2a e8 f7 31 03 00 48 89 df <48> 8b 80 10 01 00 00 e8 68 fb 69 ed 48 8b 75 f0 65 48 33 34 25 28
[Wed Feb 27 14:17:09 2019] RSP: 0018:ffffb42701ab7d40 EFLAGS: 00010282
[Wed Feb 27 14:17:09 2019] RAX: 0000000000000000 RBX: ffff9d79637ee080 RCX: 0000000000000003
[Wed Feb 27 14:17:09 2019] RDX: 0000000000000001 RSI: 0000000000000002 RDI: ffff9d79637ee080
[Wed Feb 27 14:17:09 2019] RBP: ffffb42701ab7d78 R08: ffff9d796fae70e0 R09: ffff9d796f403500
[Wed Feb 27 14:17:09 2019] R10: ffffb42701ab7d90 R11: 0000000000000000 R12: ffff9d7969d09240
[Wed Feb 27 14:17:09 2019] R13: ffff9d79624e6840 R14: ffff9d7969d09318 R15: ffff9d796d48ff80
[Wed Feb 27 14:17:09 2019] FS:  0000000000000000(0000) GS:ffff9d796fac0000(0000) knlGS:0000000000000000
[Wed Feb 27 14:17:09 2019] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[Wed Feb 27 14:17:09 2019] CR2: 0000000000000110 CR3: 0000000427f22000 CR4: 00000000000006e0
[Wed Feb 27 14:17:09 2019] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[Wed Feb 27 14:17:09 2019] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[Wed Feb 27 14:17:09 2019] Call Trace:
[Wed Feb 27 14:17:09 2019]  virtio_transport_recv_pkt+0x63/0x820 [vmw_vsock_virtio_transport_common]
[Wed Feb 27 14:17:09 2019]  ? kfree+0x17e/0x190
[Wed Feb 27 14:17:09 2019]  ? detach_buf_split+0x145/0x160
[Wed Feb 27 14:17:09 2019]  ? __switch_to_asm+0x40/0x70
[Wed Feb 27 14:17:09 2019]  virtio_transport_rx_work+0xa0/0x106 [vmw_vsock_virtio_transport]
[Wed Feb 27 14:17:09 2019] NET: Registered protocol family 40
[Wed Feb 27 14:17:09 2019]  process_one_work+0x167/0x410
[Wed Feb 27 14:17:09 2019]  worker_thread+0x4d/0x460
[Wed Feb 27 14:17:09 2019]  kthread+0x105/0x140
[Wed Feb 27 14:17:09 2019]  ? rescuer_thread+0x360/0x360
[Wed Feb 27 14:17:09 2019]  ? kthread_destroy_worker+0x50/0x50
[Wed Feb 27 14:17:09 2019]  ret_from_fork+0x35/0x40
[Wed Feb 27 14:17:09 2019] Modules linked in: vmw_vsock_virtio_transport vmw_vsock_virtio_transport_common input_leds vsock serio_raw i2c_piix4 mac_hid qemu_fw_cfg autofs4 cirrus ttm drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops virtio_net psmouse drm net_failover pata_acpi virtio_blk failover floppy

Fixes: 22b5c0b6 ("vsock/virtio: fix kernel panic after device hot-unplug")
Reported-by: Alexandru Herghelegiu <aherghelegiu@bitdefender.com>
Signed-off-by: Adalbert Lazăr <alazar@bitdefender.com>
Co-developed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

4c404ce2

connector: fix unsafe usage of ->real_parent · 6d2b0f02

Li RongQing authored Mar 06, 2019

proc_exit_connector() uses ->real_parent lockless. This is not
safe that its parent can go away at any moment, so use RCU to
protect it, and ensure that this task is not released.

[  747.624551] ==================================================================
[  747.632946] BUG: KASAN: use-after-free in proc_exit_connector+0x1f7/0x310
[  747.640686] Read of size 4 at addr ffff88a0276988e0 by task sshd/2882
[  747.648032]
[  747.649804] CPU: 11 PID: 2882 Comm: sshd Tainted: G            E     4.19.26-rc2 #11
[  747.658629] Hardware name: IBM x3550M4 -[7914OFV]-/00AM544, BIOS -[D7E142BUS-1.71]- 07/31/2014
[  747.668419] Call Trace:
[  747.671269]  dump_stack+0xf0/0x19b
[  747.675186]  ? show_regs_print_info+0x5/0x5
[  747.679988]  ? kmsg_dump_rewind_nolock+0x59/0x59
[  747.685302]  print_address_description+0x6a/0x270
[  747.691162]  kasan_report+0x258/0x380
[  747.695835]  ? proc_exit_connector+0x1f7/0x310
[  747.701402]  proc_exit_connector+0x1f7/0x310
[  747.706767]  ? proc_coredump_connector+0x2d0/0x2d0
[  747.712715]  ? _raw_write_unlock_irq+0x29/0x50
[  747.718270]  ? _raw_write_unlock_irq+0x29/0x50
[  747.723820]  ? ___preempt_schedule+0x16/0x18
[  747.729193]  ? ___preempt_schedule+0x16/0x18
[  747.734574]  do_exit+0xa11/0x14f0
[  747.738880]  ? mm_update_next_owner+0x590/0x590
[  747.744525]  ? debug_show_all_locks+0x3c0/0x3c0
[  747.761448]  ? ktime_get_coarse_real_ts64+0xeb/0x1c0
[  747.767589]  ? lockdep_hardirqs_on+0x1a6/0x290
[  747.773154]  ? check_chain_key+0x139/0x1f0
[  747.778345]  ? check_flags.part.35+0x240/0x240
[  747.783908]  ? __lock_acquire+0x2300/0x2300
[  747.789171]  ? _raw_spin_unlock_irqrestore+0x59/0x70
[  747.795316]  ? _raw_spin_unlock_irqrestore+0x59/0x70
[  747.801457]  ? do_raw_spin_unlock+0x10f/0x1e0
[  747.806914]  ? do_raw_spin_trylock+0x120/0x120
[  747.812481]  ? preempt_count_sub+0x14/0xc0
[  747.817645]  ? _raw_spin_unlock+0x2e/0x50
[  747.822708]  ? __handle_mm_fault+0x12db/0x1fa0
[  747.828367]  ? __pmd_alloc+0x2d0/0x2d0
[  747.833143]  ? check_noncircular+0x50/0x50
[  747.838309]  ? match_held_lock+0x7f/0x340
[  747.843380]  ? check_noncircular+0x50/0x50
[  747.848561]  ? handle_mm_fault+0x21a/0x5f0
[  747.853730]  ? check_flags.part.35+0x240/0x240
[  747.859290]  ? check_chain_key+0x139/0x1f0
[  747.864474]  ? __do_page_fault+0x40f/0x760
[  747.869655]  ? __audit_syscall_entry+0x4b/0x1f0
[  747.875319]  ? syscall_trace_enter+0x1d5/0x7b0
[  747.880877]  ? trace_raw_output_preemptirq_template+0x90/0x90
[  747.887895]  ? trace_raw_output_sys_exit+0x80/0x80
[  747.893860]  ? up_read+0x3b/0x90
[  747.898142]  ? stop_critical_timings+0x260/0x260
[  747.903909]  do_group_exit+0xe0/0x1c0
[  747.908591]  ? __x64_sys_exit+0x30/0x30
[  747.913460]  ? trace_raw_output_preemptirq_template+0x90/0x90
[  747.920485]  ? tracer_hardirqs_on+0x270/0x270
[  747.925956]  __x64_sys_exit_group+0x28/0x30
[  747.931214]  do_syscall_64+0x117/0x400
[  747.935988]  ? syscall_return_slowpath+0x2f0/0x2f0
[  747.941931]  ? trace_hardirqs_off_thunk+0x1a/0x1c
[  747.947788]  ? trace_hardirqs_on_caller+0x1d0/0x1d0
[  747.953838]  ? lockdep_sys_exit+0x16/0x8e
[  747.958915]  ? trace_hardirqs_off_thunk+0x1a/0x1c
[  747.964784]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[  747.971021] RIP: 0033:0x7f572f154c68
[  747.975606] Code: Bad RIP value.
[  747.979791] RSP: 002b:00007ffed2dfaa58 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7
[  747.989324] RAX: ffffffffffffffda RBX: 00007f572f431840 RCX: 00007f572f154c68
[  747.997910] RDX: 0000000000000001 RSI: 000000000000003c RDI: 0000000000000001
[  748.006495] RBP: 0000000000000001 R08: 00000000000000e7 R09: fffffffffffffee0
[  748.015079] R10: 00007f572f4387e8 R11: 0000000000000246 R12: 00007f572f431840
[  748.023664] R13: 000055a7f90f2c50 R14: 000055a7f96e2310 R15: 000055a7f96e2310
[  748.032287]
[  748.034509] Allocated by task 2300:
[  748.038982]  kasan_kmalloc+0xa0/0xd0
[  748.043562]  kmem_cache_alloc_node+0xf5/0x2e0
[  748.049018]  copy_process+0x1781/0x4790
[  748.053884]  _do_fork+0x166/0x9a0
[  748.058163]  do_syscall_64+0x117/0x400
[  748.062943]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[  748.069180]
[  748.071405] Freed by task 15395:
[  748.075591]  __kasan_slab_free+0x130/0x180
[  748.080752]  kmem_cache_free+0xc2/0x310
[  748.085619]  free_task+0xea/0x130
[  748.089901]  __put_task_struct+0x177/0x230
[  748.095063]  finish_task_switch+0x51b/0x5d0
[  748.100315]  __schedule+0x506/0xfa0
[  748.104791]  schedule+0xca/0x260
[  748.108978]  futex_wait_queue_me+0x27e/0x420
[  748.114333]  futex_wait+0x251/0x550
[  748.118814]  do_futex+0x75b/0xf80
[  748.123097]  __x64_sys_futex+0x231/0x2a0
[  748.128065]  do_syscall_64+0x117/0x400
[  748.132835]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[  748.139066]
[  748.141289] The buggy address belongs to the object at ffff88a027698000
[  748.141289]  which belongs to the cache task_struct of size 12160
[  748.156589] The buggy address is located 2272 bytes inside of
[  748.156589]  12160-byte region [ffff88a027698000, ffff88a02769af80)
[  748.171114] The buggy address belongs to the page:
[  748.177055] page:ffffea00809da600 count:1 mapcount:0 mapping:ffff888107d01e00 index:0x0 compound_mapcount: 0
[  748.189136] flags: 0x57ffffc0008100(slab|head)
[  748.194688] raw: 0057ffffc0008100 ffffea00809a3200 0000000300000003 ffff888107d01e00
[  748.204424] raw: 0000000000000000 0000000000020002 00000001ffffffff 0000000000000000
[  748.214146] page dumped because: kasan: bad access detected
[  748.220976]
[  748.223197] Memory state around the buggy address:
[  748.229128]  ffff88a027698780: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  748.238271]  ffff88a027698800: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  748.247414] >ffff88a027698880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  748.256564]                                                        ^
[  748.264267]  ffff88a027698900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  748.273493]  ffff88a027698980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  748.282630] ==================================================================

Fixes: b086ff87 ("connector: add parent pid and tgid to coredump and exit events")
Signed-off-by: Zhang Yu <zhangyu31@baidu.com>
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

6d2b0f02

vxlan: do not need BH again in vxlan_cleanup() · f98ec788

Litao Jiao authored Mar 06, 2019

vxlan_cleanup() is a timer callback, it is already
and only running in BH context.
Signed-off-by: Litao Jiao <jiaolitao@raisecom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

f98ec788

net: hns3: add dma_rmb() for rx description · d394d33b

Jian Shen authored Mar 06, 2019

HW can not guarantee complete write desc->rx.size, even though
HNS3_RXD_VLD_B has been set. Driver needs to add dma_rmb()
instruction to make sure desc->rx.size is always valid.

Fixes: e5597095 ("net: hns3: Add handling of GRO Pkts not fully RX'ed in NAPI poll")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

d394d33b

net: add missing documentation in linux/skbuff.h · 161e6137

Pedro Tammela authored Mar 05, 2019

This patch adds missing documentation for some inline functions on
linux/skbuff.h. The patch is incomplete and a lot more can be added,
just wondering if it's of interest of the netdev developers.

Also fixed some whitespaces.
Signed-off-by: Pedro Tammela <pctammela@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

161e6137

bpf: fix warning about using plain integer as NULL · 71b91a50

Bo YU authored Mar 08, 2019

Sparse warning below:

sudo make C=2 CF=-D__CHECK_ENDIAN__ M=net/bpf/
CHECK   net/bpf//test_run.c
net/bpf//test_run.c:19:77: warning: Using plain integer as NULL pointer
./include/linux/bpf-cgroup.h:295:77: warning: Using plain integer as NULL pointer

Fixes: 8bad74f9 ("bpf: extend cgroup bpf core to allow multiple cgroup storage types")
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Bo YU <tsu.yubo@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

71b91a50

xsk: fix to reject invalid options in Tx descriptor · c57b557b

Björn Töpel authored Mar 08, 2019

Passing a non-existing option in the options member of struct
xdp_desc was, incorrectly, silently ignored. This patch addresses
that behavior, and drops any Tx descriptor with non-existing options.

We have examined existing user space code, and to our best knowledge,
no one is relying on the current incorrect behavior. AF_XDP is still
in its infancy, so from our perspective, the risk of breakage is very
low, and addressing this problem now is important.

Fixes: 35fcde7f ("xsk: support for Tx")
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

c57b557b

xsk: fix to reject invalid flags in xsk_bind · f54ba391

Björn Töpel authored Mar 08, 2019

Passing a non-existing flag in the sxdp_flags member of struct
sockaddr_xdp was, incorrectly, silently ignored. This patch addresses
that behavior, and rejects any non-existing flags.

We have examined existing user space code, and to our best knowledge,
no one is relying on the current incorrect behavior. AF_XDP is still
in its infancy, so from our perspective, the risk of breakage is very
low, and addressing this problem now is important.

Fixes: 965a9909 ("xsk: add support for bind for Rx")
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

f54ba391

bpf, libbpf: fixing leak when kernel does not support btf · 243b4cda

Nikita V. Shirokov authored Mar 08, 2019

We could end up in situation when we have object file w/ all btf
info, but kernel does not support btf yet. In this situation
currently libbpf just set obj->btf to NULL w/o freeing it first.
This patch is fixing it by making sure to run btf__free first.

Fixes: d29d87f7 ("btf: separate btf creation and loading")
Signed-off-by: Nikita V. Shirokov <tehnerd@tehnerd.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

243b4cda

Merge branch 'stmmac-add-some-fixes-for-stm32' · ffb3016b

David S. Miller authored Mar 08, 2019

Christophe Roullier says:

====================
stmmac: add some fixes for stm32

For common stmmac:
	- Add support to set CSR Clock range selection in DT
For stm32mpu:
	- Glue codes to support magic packet
	- Glue codes to support all PHY config :
		PHY_MODE (MII,GMII, RMII, RGMII) and in normal,
		PHY wo crystal (25Mhz),
		PHY wo crystal (50Mhz), No 125Mhz from PHY config
For stm32mcu:
	- Add Ethernet support for stm32h7

Changes in V3:
	- Reverse for syscfg management because it is manage by these patches
	  https://lkml.org/lkml/2018/12/12/133
	  https://lkml.org/lkml/2018/12/12/134
	  https://lkml.org/lkml/2018/12/12/131
	  https://lkml.org/lkml/2018/12/12/132
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

ffb3016b

ARM: dts: stm32: Add Ethernet support on stm32h7 SOC and activate it for eval and disco boards · 5473f1be

Christophe Roullier authored Mar 05, 2019

Synopsys GMAC 4.10 is used. And Phy mode for eval and disco is RMII
with PHY SMSC LAN8742
Signed-off-by: Christophe Roullier <christophe.roullier@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

5473f1be

dt-bindings: net: stmmac: remove syscfg clock property · 83566799

Christophe Roullier authored Mar 05, 2019

Syscfg clock is no more needed.
Signed-off-by: Christophe Roullier <christophe.roullier@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

83566799