We used to allow you to set FLUSH_ALL and then just wouldn't do things like
commit transactions or wait on ordered extents if we noticed you were in a
transaction.  However now that all the flushing for FLUSH_ALL is asynchronous
we've lost the ability to tell, and we could end up deadlocking.  So instead use
FLUSH_LIMIT in reserve_metadata_bytes in relocation and then return -EAGAIN if
we error out to preserve the previous behavior.  I've also added an ASSERT() to
catch anybody else who tries to do this.  Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Since we set the reloc control before we've reserved our space for relocation we
could race with a root being dirtied and not actually have space to do our init
reloc root.  So once we've allocated it and set it up go ahead and make our
reservation before setting the relocate control, that way anybody who tries to
do the reloc root init has space to use.  Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>

This is the case all the time anyway except for relocation which could be doing
a reloc root for a non ref counted root, in which case we'd end up with some
random block rsv rather than the one we have our reservation in.  If there isn't
enough space in the block rsv we are trying to steal from we'll BUG() because we
expect there to be space for the orphan to make its reservation.  Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Traditionally we've calculated the global block rsv by guessing how much of the
metadata used amount was the extent tree, and then taking the data size and
figuring out how large the csum tree would have to be to hold that much data.

This is imprecise and falls down on MIXED file systems as we can't trust the
data used amount.  This resulted in failures for xfstests generic/333 because it
creates lots of clones, which explodes out the extent tree.  Our global reserve
calculations were woefully inaccurate in this case which meant we got into a
situation where we did not have enough reserved to do our work.

We know we only use the global block rsv for the extent, csum, and root trees,
so just get the bytes used for these trees and use that as the basis of our
global reserve.  Since these are not reference counted trees the bytes_used
value will be accurate.  This fixed the transaction aborts seen with
generic/333.  Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Instead of doing fs_info->fs_root in need_async_flush, which may not be set
during recovery when mounting, just pass the root itself in, which makes more
sense as thats what btrfs_calc_reclaim_metadata_size takes.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Reported-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

We do this check when we start the async reclaimer thread, might as well check
before we kick it off to save us some cycles.  Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>

We were doing trace_btrfs_release_reserved_extent() in pin_down_extent which
isn't quite right because we will go through and free that extent later when we
unpin, so it messes up apps that are accounting for the reservation space.  We
were also unconditionally doing it in __btrfs_free_reserved_extent(), when we
only actually free the reservation instead of pinning the extent.  Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>

When tracing enospc problems on a box with multiple file systems mounted I need
to be able to differentiate between the two file systems.  Most of the important
trace points I'm looking at already have an fsid, but the reserved extent trace
points do not, so add that to make it possible to figure out which trace point
belongs to which file system.  Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>

We want to track when we're triggering flushing from our reservation code and
what flushing is being done when we start flushing.  Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>

We can sometimes drop the reservation we had for our inode, so we need to remove
that amount from to_reserve so that our tracepoint reports a valid amount of
space.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Pinned extents are an important metric to keep track of for enospc.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Our enospc flushing sucks.  It is born from a time where we were early
enospc'ing constantly because multiple threads would race in for the same
reservation and randomly starve other ones out.  So I came up with this solution
to block any other reservations from happening while one guy tried to flush
stuff to satisfy his reservation.  This gives us pretty good correctness, but
completely crap latency.

The solution I've come up with is ticketed reservations.  Basically we try to
make our reservation, and if we can't we put a ticket on a list in order and
kick off an async flusher thread.  This async flusher thread does the same old
flushing we always did, just asynchronously.  As space is freed and added back
to the space_info it checks and sees if we have any tickets that need
satisfying, and adds space to the tickets and wakes up anything we've satisfied.

Once the flusher thread stops making progress it wakes up all the current
tickets and tells them to take a hike.

There is a priority list for things that can't flush, since the async flusher
could do anything we need to avoid deadlocks.  These guys get priority for
having their reservation made, and will still do manual flushing themselves in
case the async flusher isn't running.

This patch gives us significantly better latencies.  Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>

I'm writing a tool to visualize the enospc system inside btrfs, I need this
tracepoint in order to keep track of the block groups in the system.  Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>

These were hidden behind enospc_debug, which isn't helpful as they indicate
actual bugs, unlike the rest of the enospc_debug stuff which is really debug
information.  Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>

We reserve space for the inode update when we first reserve space for writing to
a file.  However there are lots of ways that we can use this reservation and not
have it for subsequent ordered extents.  Previously we'd fall through and try to
reserve metadata bytes for this, then we'd just steal the full reservation from
the delalloc_block_rsv, and if that didn't have enough space we'd steal the full
reservation from the global reserve.  The problem with this is we can easily
just return ENOSPC and fallback to updating the inode item directly.  In the
worst case (assuming 4k nodesize) we'd steal 64kib from the global reserve if we
fall all the way through, however if we just fallback and update the inode
directly we'd only steal 4k * BTRFS_PATH_MAX in the worst case which is 32kib.

We would have also just added the extent item for the inode so we likely will
have already cow'ed down most of the way to the leaf containing the inode item,
so we are more often than not only need one or two nodesize's worth of
reservations.  Given the reservation for the extent itself is also a worst case
we will likely already have space to cover the inode update.

This change will make us behave better in the theoretical worst case, and much
better in the case that we don't have our reservation and cannot reserve more
metadata.  Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>

There are a few races in the metadata reservation stuff.  First we add the bytes
to the block_rsv well after we've set the bit on the inode saying that we have
space for it and after we've reserved the bytes.  So use the normal
btrfs_block_rsv_add helper for this case.  Secondly we can flush delalloc
extents when we try to reserve space for our write, which means that we could
have used up the space for the inode and we wouldn't know because we only check
before the reservation.  So instead make sure we are always reserving space for
the inode update, and then if we don't need it release those bytes afterward.
Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>

So btrfs_block_rsv_migrate just unconditionally calls block_rsv_migrate_bytes.
Not only this but it unconditionally changes the size of the block_rsv.  This
isn't a bug strictly speaking, but it makes truncate block rsv's look funny
because every time we migrate bytes over its size grows, even though we only
want it to be a specific size.  So collapse this into one function that takes an
update_size argument and make truncate and evict not update the size for
consistency sake.  Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>

For some reason we're adding bytes_readonly to the space info after we update
the space info with the block group info.  This creates a tiny race where we
could over-reserve space because we haven't yet taken out the bytes_readonly
bit.  Since we already know this information at the time we call
update_space_info, just pass it along so it can be updated all at once.  Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Pull fuse fix from Miklos Szeredi:
 "This makes sure userspace filesystems are not broken by the parallel
  lookups and readdir feature"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  fuse: serialize dirops by default

Pull overlayfs fixes from Miklos Szeredi:
 "This contains fixes for a dentry leak, a regression in 4.6 noticed by
  Docker users and missing write access checking in truncate"

* 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
  ovl: warn instead of error if d_type is not supported
  ovl: get_write_access() in truncate
  ovl: fix dentry leak for default_permissions

overlay needs underlying fs to support d_type. Recently I put in a
patch in to detect this condition and started failing mount if
underlying fs did not support d_type.

But this breaks existing configurations over kernel upgrade. Those who
are running docker (partially broken configuration) with xfs not
supporting d_type, are surprised that after kernel upgrade docker does
not run anymore.

https://github.com/docker/docker/issues/22937#issuecomment-229881315

So instead of erroring out, detect broken configuration and warn
about it. This should allow existing docker setups to continue
working after kernel upgrade.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes: 45aebeaf ("ovl: Ensure upper filesystem supports d_type")
Cc: <stable@vger.kernel.org> 4.6

Pull MIPS fix from Ralf Baechle:
 "Only a single fix for 4.7 pending at this point.  It fixes an issue
  that may lead to corruption of the cache mode bits in the page table"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  MIPS: Fix possible corruption of cache mode by mprotect.

Pull powerpc fixes from Michael Ellerman:

 - tm: Always reclaim in start_thread() for exec() class syscalls from
   Cyril Bur

 - tm: Avoid SLB faults in treclaim/trecheckpoint when RI=0 from Michael
   Neuling

 - eeh: Fix wrong argument passed to eeh_rmv_device() from Gavin Shan

 - Initialise pci_io_base as early as possible from Darren Stevens

* tag 'powerpc-4.7-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc: Initialise pci_io_base as early as possible
  powerpc/tm: Avoid SLB faults in treclaim/trecheckpoint when RI=0
  powerpc/eeh: Fix wrong argument passed to eeh_rmv_device()
  powerpc/tm: Always reclaim in start_thread() for exec() class syscalls

Pull drm fixes frlm Dave Airlie:
 "Just some AMD and Intel fixes, the AMD ones are further production
  Polaris fixes, and the Intel ones fix some early timeouts, some PCI ID
  changes and a couple of other fixes.

  Still a bit Internet challenged here, hopefully end of next week will
  solve it"

* tag 'drm-fixes-for-v4.7-rc6' of git://people.freedesktop.org/~airlied/linux:
  drm/i915: Fix missing unlock on error in i915_ppgtt_info()
  drm/amd/powerplay: workaround for UVD clock issue
  drm/amdgpu: add ACLK_CNTL setting for polaris10
  drm/amd/powerplay: fix issue uvd dpm can't enabled on Polaris11.
  drm/amd/powerplay: Workaround for Memory EDC Error on Polaris10.
  drm/i915: Removing PCI IDs that are no longer listed as Kabylake.
  drm/i915: Add more Kabylake PCI IDs.
  drm/i915: Avoid early timeout during AUX transfers
  drm/i915/hsw: Avoid early timeout during LCPLL disable/restore
  drm/i915/lpt: Avoid early timeout during FDI PHY reset
  drm/i915/bxt: Avoid early timeout during PLL enable
  drm/i915: Refresh cached DP port register value on resume
  drm/amd/powerplay: Update CKS on/ CKS off voltage offset calculation
  drm/amd/powerplay: disable FFC.
  drm/amd/powerplay: add some definition for FFC feature on polaris.

Pull spi fixes from Mark Brown:
 "A few small driver-specific fixes for SPI, all in the normal important
  if you hit them category especially the rockchip driver fix which
  addresses a race which has been exposed more frequently with some
  recent performance improvements"

* tag 'spi-fix-v4.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: sunxi: fix transfer timeout
  spi: sun4i: fix FIFO limit
  spi: rockchip: Signal unfinished DMA transfers
  spi: spi-ti-qspi: Suspend the queue before removing the device

Merge tag 'regulator-fix-v4.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator fixes from Mark Brown:
 "Two small fixes for the regulator subsystem - one fixing a crash with
  one of the devices supported by the max77620 driver, another fixing
  startup for the anatop regulator when it starts up with the regulator
  in bypass mode"

* tag 'regulator-fix-v4.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: max77620: check for valid regulator info
  regulator: anatop: allow regulator to be in bypass mode

Pull clk fixes from Stephen Boyd:
 "A small fix for the newly added oxnas clk driver and a handful of
  rockchip clk driver fixes for newly added rk3399 support"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: Fix return value check in oxnas_stdclk_probe()
  clk: rockchip: release io resource when failing to init clk on rk3399
  clk: rockchip: fix cpuclk registration error handling
  clk: rockchip: Revert "clk: rockchip: reset init state before mmc card initialization"
  clk: rockchip: fix incorrect parent for rk3399's {c,g}pll_aclk_perihp_src
  clk: rockchip: mark rk3399 GIC clocks as critical
  clk: rockchip: initialize flags of clk_init_data in mmc-phase clock

here's a batch of i915 fixes for 4.7.

* tag 'drm-intel-fixes-2016-06-30' of git://anongit.freedesktop.org/drm-intel:
  drm/i915: Fix missing unlock on error in i915_ppgtt_info()
  drm/i915: Removing PCI IDs that are no longer listed as Kabylake.
  drm/i915: Add more Kabylake PCI IDs.
  drm/i915: Avoid early timeout during AUX transfers
  drm/i915/hsw: Avoid early timeout during LCPLL disable/restore
  drm/i915/lpt: Avoid early timeout during FDI PHY reset
  drm/i915/bxt: Avoid early timeout during PLL enable
  drm/i915: Refresh cached DP port register value on resume

Just a few more late fixes for Polaris cards.

* 'drm-fixes-4.7' of git://people.freedesktop.org/~agd5f/linux:
  drm/amd/powerplay: workaround for UVD clock issue
  drm/amdgpu: add ACLK_CNTL setting for polaris10
  drm/amd/powerplay: fix issue uvd dpm can't enabled on Polaris11.
  drm/amd/powerplay: Workaround for Memory EDC Error on Polaris10.
  drm/amd/powerplay: Update CKS on/ CKS off voltage offset calculation
  drm/amd/powerplay: disable FFC.
  drm/amd/powerplay: add some definition for FFC feature on polaris.

The following testcase may result in a page table entries with a invalid
CCA field being generated:

static void *bindstack;

static int sysrqfd;

static void protect_low(int protect)
{
	mprotect(bindstack, BINDSTACK_SIZE, protect);
}

static void sigbus_handler(int signal, siginfo_t * info, void *context)
{
	void *addr = info->si_addr;

	write(sysrqfd, "x", 1);

	printf("sigbus, fault address %p (should not happen, but might)\n",
	       addr);
	abort();
}

static void run_bind_test(void)
{
	unsigned int *p = bindstack;

	p[0] = 0xf001f001;

	write(sysrqfd, "x", 1);

	/* Set trap on access to p[0] */
	protect_low(PROT_NONE);

	write(sysrqfd, "x", 1);

	/* Clear trap on access to p[0] */
	protect_low(PROT_READ | PROT_WRITE | PROT_EXEC);

	write(sysrqfd, "x", 1);

	/* Check the contents of p[0] */
	if (p[0] != 0xf001f001) {
		write(sysrqfd, "x", 1);

		/* Reached, but shouldn't be */
		printf("badness, shouldn't happen but does\n");
		abort();
	}
}

int main(void)
{
	struct sigaction sa;

	sysrqfd = open("/proc/sysrq-trigger", O_WRONLY);

	if (sigprocmask(SIG_BLOCK, NULL, &sa.sa_mask)) {
		perror("sigprocmask");
		return 0;
	}

	sa.sa_sigaction = sigbus_handler;
	sa.sa_flags = SA_SIGINFO | SA_NODEFER | SA_RESTART;
	if (sigaction(SIGBUS, &sa, NULL)) {
		perror("sigaction");
		return 0;
	}

	bindstack = mmap(NULL,
			 BINDSTACK_SIZE,
			 PROT_READ | PROT_WRITE | PROT_EXEC,
			 MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
	if (bindstack == MAP_FAILED) {
		perror("mmap bindstack");
		return 0;
	}

	printf("bindstack: %p\n", bindstack);

	run_bind_test();

	printf("done\n");

	return 0;
}

There are multiple ingredients for this:

 1) PAGE_NONE is defined to _CACHE_CACHABLE_NONCOHERENT, which is CCA 3
    on all platforms except SB1 where it's CCA 5.
 2) _page_cachable_default must have bits set which are not set
    _CACHE_CACHABLE_NONCOHERENT.
 3) Either the defective version of pte_modify for XPA or the standard
    version must be in used.  However pte_modify for the 36 bit address
    space support is no affected.

In that case additional bits in the final CCA mode may generate an invalid
value for the CCA field.  On the R10000 system where this was tracked
down for example a CCA 7 has been observed, which is Uncached Accelerated.

Fixed by:

 1) Using the proper CCA mode for PAGE_NONE just like for all the other
    PAGE_* pte/pmd bits.
 2) Fix the two affected variants of pte_modify.

Further code inspection also shows the same issue to exist in pmd_modify
which would affect huge page systems.

Issue in pte_modify tracked down by Alastair Bridgewater, PAGE_NONE
and pmd_modify issue found by me.

The history of this goes back beyond Linus' git history.  Chris Dearman's
commit 35133692 ("[MIPS] Allow setting of
the cache attribute at run time.") missed the opportunity to fix this
but it was originally introduced in lmo commit
d523832cf12007b3242e50bb77d0c9e63e0b6518 ("Missing from last commit.")
and 32cc38229ac7538f2346918a09e75413e8861f87 ("New configuration option
CONFIG_MIPS_UNCACHED.")
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Reported-by: Alastair Bridgewater <alastair.bridgewater@gmail.com>

Pull ACPI fix from Rafael Wysocki:
 "Fix an expression in the ACPI PCI IRQ management code added by a
  recent commit that overlooked missing parens in it, so the result of
  the computation is incorrect in some cases (Sinan Kaya)"

* tag 'acpi-4.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI,PCI,IRQ: correct operator precedence

Pull power management fixes from Rafael Wysocki:
 "Three cpufreq fixes, one in the core (stable-candidate) and two in
  drivers (intel_pstate and cpufreq-dt).

  Specifics:

   - Fix a recent intel_pstate regression that caused the number of
     wakeups to increase significantly on an idle system in some cases
     due to excessive synchronize_sched() invocations (Rafael Wysocki).

   - Fix unnecessary invocations of WARN_ON() in the cpufreq core after
     cpufreq has been suspended introduced during the 4.6 cycla (Rafael
     Wysocki).

   - Fix an error code path in the cpufreq-dt-platdev driver that
     forgets to drop a reference to a DT node (Masahiro Yamada)"

* tag 'pm-4.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: Avoid false-positive WARN_ON()s in cpufreq_update_policy()
  cpufreq: dt: call of_node_put() before error out
  intel_pstate: Do not clear utilization update hooks on policy changes

Pull vfs fixes from Al Viro:
 "Tmpfs readdir throughput regression fix (this cycle) + some -stable
  fodder all over the place.

  One missing bit is Miklos' tonight locks.c fix - NFS folks had already
  grabbed that one by the time I woke up ;-)"

[ The locks.c fix came through the nfsd tree just moments ago ]

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  namespace: update event counter when umounting a deleted dentry
  9p: use file_dentry()
  ceph: fix d_obtain_alias() misuses
  lockless next_positive()
  libfs.c: new helper - next_positive()
  dcache_{readdir,dir_lseek}(): don't bother with nested ->d_lock

Pull lockd/locks fixes from Bruce Fields:
 "One fix for lockd soft lookups in an error path, and one fix for file
  leases on overlayfs"

* tag 'nfsd-4.7-3' of git://linux-nfs.org/~bfields/linux:
  locks: use file_inode()
  lockd: unregister notifier blocks if the service fails to come up completely

Pull more MFD fixes from Lee Jones:
 "Apologies for missing these from the first pull request.

  Final patches fixing Reset API change"

* tag 'mfd-fixes-4.7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd:
  usb: dwc3: st: Use explicit reset_control_get_exclusive() API
  phy: phy-stih407-usb: Use explicit reset_control_get_exclusive() API
  phy: miphy28lp: Inform the reset framework that our reset line may be shared

Pull libnvdimm fixes from Dan Williams:
 "1/ Two regression fixes since v4.6: one for the byte order of a sysfs
     attribute (bz121161) and another for QEMU 2.6's NVDIMM _DSM (ACPI
     Device Specific Method) implementation that gets tripped up by new
     auto-probing behavior in the NFIT driver.

  2/ A fix tagged for -stable that stops the kernel from
     clobbering/ignoring changes to the configuration of a 'pfn'
     instance ("struct page" driver).  For example changing the
     alignment from 2M to 1G may silently revert to 2M if that value is
     currently stored on media.

  3/ A fix from Eric for an xfstests failure in dax.  It is not
     currently tagged for -stable since it requires an 8-exabyte file
     system to trigger, and there appear to be no user visible side
     effects"

* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  nfit: fix format interface code byte order
  dax: fix offset overflow in dax_io
  acpi, nfit: fix acpi_check_dsm() vs zero functions implemented
  libnvdimm, pfn, dax: fix initialization vs autodetect for mode + alignment

Pull staging and IIO fixes from Greg KH:
 "Here are a few small staging and iio driver fixes for 4.7-rc6.

  Nothing major here, just a number of small fixes, all have been in
  linux-next for a while, and the full details are in the shortlog"

* tag 'staging-4.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  iio:ad7266: Fix probe deferral for vref
  iio:ad7266: Fix support for optional regulators
  iio:ad7266: Fix broken regulator error handling
  iio: accel: kxsd9: fix the usage of spi_w8r8()
  staging: iio: accel: fix error check
  staging: iio: ad5933: fix order of cycle conditions
  staging: iio: fix ad7606_spi regression
  iio: inv_mpu6050: Fix use-after-free in ACPI code

Pull tty fixes from Greg KH:
 "Here are two tty fixes for some reported issues.  One resolves a crash
  in devpts, and the other resolves a problem with the fbcon cursor
  blink causing lockups.

  Both have been in linux-next with no reported problems"

* tag 'tty-4.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  devpts: fix null pointer dereference on failed memory allocation
  tty: vt: Fix soft lockup in fbcon cursor blink timer.