Without gpiolib, this driver fails to link:

arm-linux-gnueabi-ld: drivers/hid/hid-mcp2221.o: in function `mcp2221_probe':
hid-mcp2221.c:(.text+0x1b0): undefined reference to `devm_gpiochip_add_data'
arm-linux-gnueabi-ld: drivers/hid/hid-mcp2221.o: in function `mcp_gpio_get':
hid-mcp2221.c:(.text+0x30c): undefined reference to `gpiochip_get_data'

Fixes: 328de1c5 ("HID: mcp2221: add GPIO functionality support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Rishi Gupta <gupt21@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

On the Dell XPS 9570, the Synaptics SYNA2393 touchpad generates spurious
interrupts after resuming from suspend until it receives some input or
is reset. Add it to the quirk I2C_HID_QUIRK_RESET_ON_RESUME so that it
is reset when resuming from suspend.

More information about the bug can be found in this mailing list
discussion: https://www.spinics.net/lists/linux-input/msg59530.htmlSigned-off-by: Daniel Playfair Cal <daniel.playfair.cal@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

The state of the center button was not reported to userspace for the
2nd-gen Intuos Pro S when used over Bluetooth due to the pad handling
code not being updated to support its reduced number of buttons. This
patch uses the actual number of buttons present on the tablet to
assemble a button state bitmap.

Link: https://github.com/linuxwacom/xf86-input-wacom/issues/112
Fixes: cd47de45b855 ("HID: wacom: Add 2nd gen Intuos Pro Small support")
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Cc: stable@vger.kernel.org # v5.3+
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

The syzbot fuzzer discovered a bad race between in the usbhid driver
between usbhid_stop() and usbhid_close().  In particular,
usbhid_stop() does:

	usb_free_urb(usbhid->urbin);
	...
	usbhid->urbin = NULL; /* don't mess up next start */

and usbhid_close() does:

	usb_kill_urb(usbhid->urbin);

with no mutual exclusion.  If the two routines happen to run
concurrently so that usb_kill_urb() is called in between the
usb_free_urb() and the NULL assignment, it will access the
deallocated urb structure -- a use-after-free bug.

This patch adds a mutex to the usbhid private structure and uses it to
enforce mutual exclusion of the usbhid_start(), usbhid_stop(),
usbhid_open() and usbhid_close() callbacks.

Reported-and-tested-by: syzbot+7bf5a7b0f0a1f9446f4c@syzkaller.appspotmail.com
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: <stable@vger.kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

This reverts commit 15893fa4.

The referenced commit broke pen and touch input for a variety of devices
such as the Cintiq Pro 32. Affected devices may appear to work normally
for a short amount of time, but eventually loose track of actual touch
state and can leave touch arbitration enabled which prevents the pen
from working. The commit is not itself required for any currently-available
Bluetooth device, and so we revert it to correct the behavior of broken
devices.

This breakage occurs due to a mismatch between the order of collections
and the order of usages on some devices. This commit tries to read the
contact count before processing events, but will fail if the contact
count does not occur prior to the first logical finger collection. This
is the case for devices like the Cintiq Pro 32 which place the contact
count at the very end of the report.

Without the contact count set, touches will only be partially processed.
The `wacom_wac_finger_slot` function will not open any slots since the
number of contacts seen is greater than the expectation of 0, but we will
still end up calling `input_mt_sync_frame` for each finger anyway. This
can cause problems for userspace separate from the issue currently taking
place in the kernel. Only once all of the individual finger collections
have been processed do we finally get to the enclosing collection which
contains the contact count. The value ends up being used for the *next*
report, however.

This delayed use of the contact count can cause the driver to loose track
of the actual touch state and believe that there are contacts down when
there aren't. This leaves touch arbitration enabled and prevents the pen
from working. It can also cause userspace to incorrectly treat single-
finger input as gestures.

Link: https://github.com/linuxwacom/input-wacom/issues/146Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Aaron Armstrong Skomra <aaron.skomra@wacom.com>
Fixes: 15893fa4 ("HID: wacom: generic: read the number of expected touches on a per collection basis")
Cc: stable@vger.kernel.org # 5.3+
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

HID_DEVICE_ID_ALPS_1657 PID is too specific, as there are many other
ALPS hardware IDs using this particular touchpad.

Rename the identifier to HID_DEVICE_ID_ALPS_U1_UNICORN_LEGACY in order
to describe reality better.

Fixes: 640e403b ("HID: alps: Add AUI1657 device ID")
Reported-by: Xiaojian Cao <xiaojian.cao@cn.alps.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

This device is used on Lenovo V130-15IKB variants and uses
the same registers as U1.
Signed-off-by: Artem Borisov <dedsa2002@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

The Logitech G11 keyboard is a cheap variant of the G15 without the LCD
screen. It uses the same layout for its extra and macro keys (G1 - G18,
M1-M3, MR) and - from the input subsystem's perspective - behaves just
like the G15, so we can treat it as such.

Tested it with my own keyboard.
Signed-off-by: Fabian Schindlatz <fabian.schindlatz@fau.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Add support for P80H84 touchscreen from eGalaxy:

  idVendor           0x0eef D-WAV Scientific Co., Ltd
  idProduct          0xc002
  iManufacturer           1 eGalax Inc.
  iProduct                2 eGalaxTouch P80H84 2019 vDIVA_1204_T01 k4.02.146
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

We've recently switched from extracting the value of HID_DG_CONTACTMAX
at a fixed offset (which may not be correct for all tablets) to
injecting the report into the driver for the generic codepath to handle.
Unfortunately, this change was made for *all* tablets, even those which
aren't generic. Because `wacom_wac_report` ignores reports from non-
generic devices, the contact count never gets initialized. Ultimately
this results in the touch device itself failing to probe, and thus the
loss of touch input.

This commit adds back the fixed-offset extraction for non-generic devices.

Link: https://github.com/linuxwacom/input-wacom/issues/155
Fixes: 184eccd4 ("HID: wacom: generic: read HID_DG_CONTACTMAX from any feature report")
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Aaron Armstrong Skomra <aaron.skomra@wacom.com>
CC: stable@vger.kernel.org # 5.3+
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>

Pull HID updates from Jiri Kosina:

 - Logitech HID++ protocol support improvement from Filipe Laíns

 - probe fix for Logitech-G* devices from Hans de Goede

 - a few other small code cleanups and support for new device IDs

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: rmi: Simplify an error handling path in 'rmi_hid_read_block()'
  HID: intel-ish-hid: hbm.h: Replace zero-length array with flexible-array member
  HID: intel-ish-hid: ishtp-dev.h: Replace zero-length array with flexible-array member
  HID: Add driver fixing Glorious PC Gaming Race mouse report descriptor
  HID: lg-g15: Do not fail the probe when we fail to disable F# emulation
  HID: appleir: Use devm_kzalloc() instead of kzalloc()
  HID: appleir: Remove unnecessary goto label
  HID: logitech-dj: add support for the static device in the Powerplay mat/receiver
  HID: mcp2221: add usb to i2c-smbus host bridge
  HID: logitech-dj: add debug msg when exporting a HID++ report descriptors
  HID: quirks: Remove ITE 8595 entry from hid_have_special_driver

Pull trivial tree updates from Jiri Kosina:
 "My attempt to revitalize trivial queue I've been neglecting for years
  (what a disaster that was for this world, right? :) ) with patches
  collected from backlog that were still relevant and not applied
  elsewhere in the meantime"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial:
  err.h: remove deprecated PTR_RET for good
  blk-mq: Fix typo in comment
  x86/boot: Fix comment spelling
  sh: mach-highlander: Fix comment spelling
  s390/dasd: Fix comment spelling
  mfd: wm8994: Fix comment spelling
  docs: Add reference in binfmt-misc.rst
  genirq: fix kerneldoc comment for irq_desc
  drm/amdgpu: fix two documentation mismatch issues
  HID: fix Kconfig word ordering
  list/hashtable: minor documentation corrections.

Pull crypto updates from Herbert Xu:
 "API:
   - Fix out-of-sync IVs in self-test for IPsec AEAD algorithms

  Algorithms:
   - Use formally verified implementation of x86/curve25519

  Drivers:
   - Enhance hwrng support in caam

   - Use crypto_engine for skcipher/aead/rsa/hash in caam

   - Add Xilinx AES driver

   - Add uacce driver

   - Register zip engine to uacce in hisilicon

   - Add support for OCTEON TX CPT engine in marvell"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (162 commits)
  crypto: af_alg - bool type cosmetics
  crypto: arm[64]/poly1305 - add artifact to .gitignore files
  crypto: caam - limit single JD RNG output to maximum of 16 bytes
  crypto: caam - enable prediction resistance in HRWNG
  bus: fsl-mc: add api to retrieve mc version
  crypto: caam - invalidate entropy register during RNG initialization
  crypto: caam - check if RNG job failed
  crypto: caam - simplify RNG implementation
  crypto: caam - drop global context pointer and init_done
  crypto: caam - use struct hwrng's .init for initialization
  crypto: caam - allocate RNG instantiation descriptor with GFP_DMA
  crypto: ccree - remove duplicated include from cc_aead.c
  crypto: chelsio - remove set but not used variable 'adap'
  crypto: marvell - enable OcteonTX cpt options for build
  crypto: marvell - add the Virtual Function driver for CPT
  crypto: marvell - add support for OCTEON TX CPT engine
  crypto: marvell - create common Kconfig and Makefile for Marvell
  crypto: arm/neon - memzero_explicit aes-cbc key
  crypto: bcm - Use scnprintf() for avoiding potential buffer overflow
  crypto: atmel-i2c - Fix wakeup fail
  ...

This is partly for readability - using named arguments instead of
numbered ones makes it muchmore obvious just what is going on.  Using
"%[efault]" instead of "%4" for the special -EFAULT constant just means
that you don't have to count the arguments to see what's up.

But the motivation for all this cleanup is that when we'll start to
conditionally use "asm goto" even for the __get_user_asm() case, the
argument numbers will depend on whether we have an error output, or an
error label we can just directly jump to.

So this moves us towards named arguments for the same reason that we
have to use named arguments for the asms that use SET_CC(): numbering
will eventually become similarly unreliable and depends on whether we
can use particular compiler features or not.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This is the exact same thing as 36807856 ("x86: get rid of 'rtype'
argument to __put_user_goto() macro") except it's about __get_user_asm()
rather than __put_user_goto().

The reasons are the same: having the low-level asm access the argument
with a different size than the compiler thinks it does is fundamentally
wrong.

But unlike the __put_user_goto() case, we actually did tell the compiler
that we used a bigger variable (either long or long long), and then only
filled in the low bits, and ended up "fixing" this by casting the result
to the proper pointer type.

That's because we needed to use a non-qualified type (the user pointer
might be a const pointer!), and that makes this a bit more painful.  Our
'__inttype()' macro used to be lazy and only differentiate between "fits
in a register" or "needs two registers".

So this fix had to also make that '__inttype()' macro more precise.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The 'rtype' argument goes back to pre-git (and pre-BK) times, and comes
from the fact that we used to not necessarily have the same type sizes
for the arguments of the inline asm as we did for the actual accesses we
did.

So 'rtype' is the 'register type' - the override of the register size in
the inline asm when it doesn't match the actual size of the variable we
use as the output argument (for when you used "put_user()" on an "int"
value that was assigned to a byte-sized user space access etc).

That mismatch doesn't actually exist any more, and should probably never
have existed in the first place.  It's a horrid bug just waiting to
happen (using more - or less - of the variable that the compiler
expected us to use).

I think we had some odd casting going on to hide the effects of that
oddity after-the-fact, but those are long gone, and these days we should
always have the right size value in the first place, using things like

        __typeof__(*(ptr)) __pu_val = (x);

and gcc should thus have the right register size without any manual
'rtype' games.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

- Logitech HID++ protocol support improvement from Filipe Laíns

- C99 code purification in intel-ish-hid from Gustavo A. R. Silva

- report descriptor fix for Glorious PC Gaming Race device from Samuel Čavoj

- device-specific (ITE 8595) fix from Hans de Goede

- small code cleanups in hid-appleir from Lucas Tanure

- probe fix for Logitech-G* devices from Hans de Goede
- error handling imrovement in hid-rmi from Christophe JAILLET

Every remaining user just has the error case returning -EFAULT.

In fact, the exception was __get_user_asm_nozero(), which was removed in
commit 4b842e4e ("x86: get rid of small constant size cases in
raw_copy_{to,from}_user()"), and the other __get_user_xyz() macros just
followed suit for consistency.

Fix up some macro whitespace while at it.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The last user was removed by commit 4b842e4e ("x86: get rid of small
constant size cases in raw_copy_{to,from}_user()").  Get rid of the
left-overs before somebody tries to use it again.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull networking updates from David Miller:
 "Highlights:

   1) Fix the iwlwifi regression, from Johannes Berg.

   2) Support BSS coloring and 802.11 encapsulation offloading in
      hardware, from John Crispin.

   3) Fix some potential Spectre issues in qtnfmac, from Sergey
      Matyukevich.

   4) Add TTL decrement action to openvswitch, from Matteo Croce.

   5) Allow paralleization through flow_action setup by not taking the
      RTNL mutex, from Vlad Buslov.

   6) A lot of zero-length array to flexible-array conversions, from
      Gustavo A. R. Silva.

   7) Align XDP statistics names across several drivers for consistency,
      from Lorenzo Bianconi.

   8) Add various pieces of infrastructure for offloading conntrack, and
      make use of it in mlx5 driver, from Paul Blakey.

   9) Allow using listening sockets in BPF sockmap, from Jakub Sitnicki.

  10) Lots of parallelization improvements during configuration changes
      in mlxsw driver, from Ido Schimmel.

  11) Add support to devlink for generic packet traps, which report
      packets dropped during ACL processing. And use them in mlxsw
      driver. From Jiri Pirko.

  12) Support bcmgenet on ACPI, from Jeremy Linton.

  13) Make BPF compatible with RT, from Thomas Gleixnet, Alexei
      Starovoitov, and your's truly.

  14) Support XDP meta-data in virtio_net, from Yuya Kusakabe.

  15) Fix sysfs permissions when network devices change namespaces, from
      Christian Brauner.

  16) Add a flags element to ethtool_ops so that drivers can more simply
      indicate which coalescing parameters they actually support, and
      therefore the generic layer can validate the user's ethtool
      request. Use this in all drivers, from Jakub Kicinski.

  17) Offload FIFO qdisc in mlxsw, from Petr Machata.

  18) Support UDP sockets in sockmap, from Lorenz Bauer.

  19) Fix stretch ACK bugs in several TCP congestion control modules,
      from Pengcheng Yang.

  20) Support virtual functiosn in octeontx2 driver, from Tomasz
      Duszynski.

  21) Add region operations for devlink and use it in ice driver to dump
      NVM contents, from Jacob Keller.

  22) Add support for hw offload of MACSEC, from Antoine Tenart.

  23) Add support for BPF programs that can be attached to LSM hooks,
      from KP Singh.

  24) Support for multiple paths, path managers, and counters in MPTCP.
      From Peter Krystad, Paolo Abeni, Florian Westphal, Davide Caratti,
      and others.

  25) More progress on adding the netlink interface to ethtool, from
      Michal Kubecek"

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2121 commits)
  net: ipv6: rpl_iptunnel: Fix potential memory leak in rpl_do_srh_inline
  cxgb4/chcr: nic-tls stats in ethtool
  net: dsa: fix oops while probing Marvell DSA switches
  net/bpfilter: remove superfluous testing message
  net: macb: Fix handling of fixed-link node
  net: dsa: ksz: Select KSZ protocol tag
  netdevsim: dev: Fix memory leak in nsim_dev_take_snapshot_write
  net: stmmac: add EHL 2.5Gbps PCI info and PCI ID
  net: stmmac: add EHL PSE0 & PSE1 1Gbps PCI info and PCI ID
  net: stmmac: create dwmac-intel.c to contain all Intel platform
  net: dsa: bcm_sf2: Support specifying VLAN tag egress rule
  net: dsa: bcm_sf2: Add support for matching VLAN TCI
  net: dsa: bcm_sf2: Move writing of CFP_DATA(5) into slicing functions
  net: dsa: bcm_sf2: Check earlier for FLOW_EXT and FLOW_MAC_EXT
  net: dsa: bcm_sf2: Disable learning for ASP port
  net: dsa: b53: Deny enslaving port 7 for 7278 into a bridge
  net: dsa: b53: Prevent tagged VLAN on port 7 for 7278
  net: dsa: b53: Restore VLAN entries upon (re)configuration
  net: dsa: bcm_sf2: Fix overflow checks
  hv_netvsc: Remove unnecessary round_up for recv_completion_cnt
  ...

Pull NTB updates from Jon Mason:
 "Bug fixes for a few printing issues, link status detection bug on AMD
  hardware, and a DMA address issue with ntb_perf.

  Also, large series of AMD NTB patches"

* tag 'ntb-5.7' of git://github.com/jonmason/ntb: (21 commits)
  NTB: add pci shutdown handler for AMD NTB
  NTB: send DB event when driver is loaded or un-loaded
  NTB: remove redundant setting of DB valid mask
  NTB: return link up status correctly for PRI and SEC
  NTB: add helper functions to set and clear sideinfo
  NTB: move ntb_ctrl handling to init and deinit
  NTB: handle link up, D0 and D3 events correctly
  NTB: handle link down event correctly
  NTB: remove handling of peer_sta from amd_link_is_up
  NTB: set peer_sta within event handler itself
  NTB: return the side info status from amd_poll_link
  NTB: define a new function to get link status
  NTB: Enable link up and down event notification
  NTB: clear interrupt status register
  NTB: Fix access to link status and control register
  MAINTAINERS: update maintainer list for AMD NTB driver
  NTB: ntb_transport: Use scnprintf() for avoiding potential buffer overflow
  ntb_hw_switchtec: Fix ntb_mw_clear_trans error if size == 0
  ntb_tool: Fix printk format
  NTB: ntb_perf: Fix address err in perf_copy_chunk
  ...

Pull x86 platform driver updates from Andy Shevchenko:

 - Fix for improper handling of fan_boost_mode in sysfs for ASUS
   laptops.

 - On newer ASUS laptops the 1st battery is named differently, here is a
   fix.

 - Fix Lex 2I385SW to allow both network cards to be used.

 - The power integrated circuit driver for Surface 3 has been added.

 - Refactor and clean up of Intel PMC driver and enable it on Intel
   Jasper Lake.

 - Clean up of Dell RBU driver.

 - Big update for Intel Speed Select technology support tool and driver.

* tag 'platform-drivers-x86-v5.7-1' of git://git.infradead.org/linux-platform-drivers-x86: (75 commits)
  platform/x86: surface3_power: Fix always true condition in mshw0011_space_handler()
  platform/x86: surface3_power: Fix Kconfig section ordering
  platform/x86: surface3_power: Add missed headers
  platform/x86: surface3_power: Reformat GUID assignment
  platform/x86: surface3_power: Drop useless macro ACPI_PTR()
  platform/x86: surface3_power: Prefix POLL_INTERVAL with SURFACE_3
  platform/x86: surface3_power: Simplify mshw0011_adp_psr() to one liner
  platform/x86: surface3_power: Use dev_err() instead of pr_err()
  platform/x86: surface3_power: Drop unused structure definition
  platform/x86: surface3_power: MSHW0011 rev-eng implementation
  platform/x86: intel_pmc_core: Make pmc_core_substate_res_show() generic
  platform/x86: intel_pmc_core: Make pmc_core_lpm_display() generic for platforms that support sub-states
  tools/power/x86/intel-speed-select: Fix a typo in error message
  tools/power/x86/intel-speed-select: Update version
  tools/power/x86/intel-speed-select: Avoid duplicate Package strings for json
  tools/power/x86/intel-speed-select: Add display for enabled cpus count
  tools/power/x86/intel-speed-select: Print friendly warning for bad command line
  tools/power/x86/intel-speed-select: Fix avx options for turbo-freq feature
  tools/power/x86/intel-speed-select: Improve CLX commands
  tools/power/x86/intel-speed-select: Show error for invalid CPUs in the options
  ...

Pull tty/serial updates from Greg KH:
 "Here is the big set of TTY / Serial patches for 5.7-rc1

  Lots of console fixups and reworking in here, serial core tweaks
  (doesn't that ever get old, why are we still creating new serial
  devices?), serial driver updates, line-protocol driver updates, and
  some vt cleanups and fixes included in here as well.

  All have been in linux-next with no reported issues"

* tag 'tty-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (161 commits)
  serial: 8250: Optimize irq enable after console write
  serial: 8250: Fix rs485 delay after console write
  vt: vt_ioctl: fix use-after-free in vt_in_use()
  vt: vt_ioctl: fix VT_DISALLOCATE freeing in-use virtual console
  tty: serial: make SERIAL_SPRD depend on COMMON_CLK
  tty: serial: fsl_lpuart: fix return value checking
  tty: serial: fsl_lpuart: move dma_request_chan()
  ARM: dts: tango4: Make /serial compatible with ns16550a
  ARM: dts: mmp*: Make the serial ports compatible with xscale-uart
  ARM: dts: mmp*: Fix serial port names
  ARM: dts: mmp2-brownstone: Don't redeclare phandle references
  ARM: dts: pxa*: Make the serial ports compatible with xscale-uart
  ARM: dts: pxa*: Fix serial port names
  ARM: dts: pxa*: Don't redeclare phandle references
  serial: omap: drop unused dt-bindings header
  serial: 8250: 8250_omap: Add DMA support for UARTs on K3 SoCs
  serial: 8250: 8250_omap: Work around errata causing spurious IRQs with DMA
  serial: 8250: 8250_omap: Extend driver data to pass FIFO trigger info
  serial: 8250: 8250_omap: Move locking out from __dma_rx_do_complete()
  serial: 8250: 8250_omap: Account for data in flight during DMA teardown
  ...

Pull MMC updates from Ulf Hansson:
 "MMC core:
   - Add support for host software queue for (e)MMC/SD
   - Throttle polling rate for CMD6
   - Update CMD13 busy condition check for CMD6 commands
   - Improve busy detect polling for erase/trim/discard/HPI
   - Fixup support for HW busy detection for HPI commands
   - Re-work and improve support for eMMC sanitize commands

  MMC host:
   - mmci:
       * Add support for sdmmc variant revision 2.0
   - mmci_sdmmc:
       * Improve support for busyend detection
       * Fixup support for signal voltage switch
       * Add support for tuning with delay block
   - mtk-sd:
       * Fix another SDIO irq issue
   - sdhci:
       * Disable native card detect when GPIO based type exist
   - sdhci:
       * Add option to defer request completion
   - sdhci_am654:
       * Add support to set a tap value per speed mode
   - sdhci-esdhc-imx:
       * Add support for i.MX8MM based variant
       * Fixup support for standard tuning on i.MX8 usdhc
       * Optimize for strobe/clock dll settings
       * Fixup support for system and runtime suspend/resume
   - sdhci-iproc:
       * Update regulator/bus-voltage management for bcm2711
   - sdhci-msm:
       * Prevent clock gating with PWRSAVE_DLL on broken variants
       * Fix management of CQE during SDHCI reset
   - sdhci-of-arasan:
       * Add support for auto tuning on ZynqMP based platforms
   - sdhci-omap:
       * Add support for system suspend/resume
   - sdhci-sprd:
       * Add support for HW busy detection
       * Enable support host software queue
   - sdhci-tegra:
       * Add support for HW busy detection
   - tmio/renesas_sdhi:
       * Enforce retune after runtime suspend
   - renesas_sdhi:
       * Use manual tap correction for HS400 on some variants
       * Add support for manual correction of tap values for tunings"

* tag 'mmc-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (86 commits)
  mmc: cavium-octeon: remove nonsense variable coercion
  mmc: mediatek: fix SDIO irq issue
  mmc: mmci_sdmmc: Fix clear busyd0end irq flag
  dt-bindings: mmc: Fix node name in an example
  mmc: core: Re-work the code for eMMC sanitize
  mmc: sdhci: use FIELD_GET for preset value bit masks
  mmc: sdhci-of-at91: Display clock changes for debug purpose only
  mmc: sdhci: iproc: Add custom set_power() callback for bcm2711
  mmc: sdhci: am654: Use sdhci_set_power_and_voltage()
  mmc: sdhci: at91: Use sdhci_set_power_and_voltage()
  mmc: sdhci: milbeaut: Use sdhci_set_power_and_voltage()
  mmc: sdhci: arasan: Use sdhci_set_power_and_voltage()
  mmc: sdhci: Introduce sdhci_set_power_and_bus_voltage()
  mmc: vub300: Use scnprintf() for avoiding potential buffer overflow
  dt-bindings: mmc: synopsys-dw-mshc: fix clock-freq-min-max in example
  sdhci: tegra: Enable MMC_CAP_WAIT_WHILE_BUSY host capability
  sdhci: tegra: Implement Tegra specific set_timeout callback
  mmc: sdhci-omap: Add Support for Suspend/Resume
  mmc: renesas_sdhi: simplify execute_tuning
  mmc: renesas_sdhi: Use BITS_PER_LONG helper
  ...

Pull Kbuild updates from Masahiro Yamada:
 "Build system:

   - add CONFIG_UNUSED_KSYMS_WHITELIST, which will be useful to define a
     fixed set of export symbols for Generic Kernel Image (GKI)

   - allow to run 'make dt_binding_check' without .config

   - use full schema for checking DT examples in *.yaml files

   - make modpost fail for missing MODULE_IMPORT_NS(), which makes more
     sense because we know the produced modules are never loadable

   - Remove unused 'AS' variable

  Kconfig:

   - sanitize DEFCONFIG_LIST, and remove ARCH_DEFCONFIG from Kconfig
     files

   - relax the 'imply' behavior so that symbols implied by 'y' can
     become 'm'

   - make 'imply' obey 'depends on' in order to make 'imply' really weak

  Misc:

   - add documentation on building the kernel with Clang/LLVM

   - revive __HAVE_ARCH_STRLEN for 32bit sparc to use optimized strlen()

   - fix warning from deb-pkg builds when CONFIG_DEBUG_INFO=n

   - various script and Makefile cleanups"

* tag 'kbuild-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (34 commits)
  Makefile: Update kselftest help information
  kbuild: deb-pkg: fix warning when CONFIG_DEBUG_INFO is unset
  kbuild: add outputmakefile to no-dot-config-targets
  kbuild: remove AS variable
  net: wan: wanxl: refactor the firmware rebuild rule
  net: wan: wanxl: use $(M68KCC) instead of $(M68KAS) for rebuilding firmware
  net: wan: wanxl: use allow to pass CROSS_COMPILE_M68k for rebuilding firmware
  kbuild: add comment about grouped target
  kbuild: add -Wall to KBUILD_HOSTCXXFLAGS
  kconfig: remove unused variable in qconf.cc
  sparc: revive __HAVE_ARCH_STRLEN for 32bit sparc
  kbuild: refactor Makefile.dtbinst more
  kbuild: compute the dtbs_install destination more simply
  Makefile: disallow data races on gcc-10 as well
  kconfig: make 'imply' obey the direct dependency
  kconfig: allow symbols implied by y to become m
  net: drop_monitor: use IS_REACHABLE() to guard net_dm_hw_report()
  modpost: return error if module is missing ns imports and MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS=n
  modpost: rework and consolidate logging interface
  kbuild: allow to run dt_binding_check without kernel configuration
  ...

Merge branch 'next-general' of git://git.kernel.org:/pub/scm/linux/kernel/git/jmorris/linux-security

Pull security subsystem updates from James Morris:
 "Two minor updates for the core security subsystem:

   - kernel-doc warning fixes from Randy Dunlap

   - header cleanup from YueHaibing"

* 'next-general' of git://git.kernel.org:/pub/scm/linux/kernel/git/jmorris/linux-security:
  security: remove duplicated include from security.h
  security: <linux/lsm_hooks.h>: fix all kernel-doc warnings

Pull SELinux updates from Paul Moore:
 "We've got twenty SELinux patches for the v5.7 merge window, the
  highlights are below:

   - Deprecate setting /sys/fs/selinux/checkreqprot to 1.

     This flag was originally created to deal with legacy userspace and
     the READ_IMPLIES_EXEC personality flag. We changed the default from
     1 to 0 back in Linux v4.4 and now we are taking the next step of
     deprecating it, at some point in the future we will take the final
     step of rejecting 1.

   - Allow kernfs symlinks to inherit the SELinux label of the parent
     directory. In order to preserve backwards compatibility this is
     protected by the genfs_seclabel_symlinks SELinux policy capability.

   - Optimize how we store filename transitions in the kernel, resulting
     in some significant improvements to policy load times.

   - Do a better job calculating our internal hash table sizes which
     resulted in additional policy load improvements and likely general
     SELinux performance improvements as well.

   - Remove the unused initial SIDs (labels) and improve how we handle
     initial SIDs.

   - Enable per-file labeling for the bpf filesystem.

   - Ensure that we properly label NFS v4.2 filesystems to avoid a
     temporary unlabeled condition.

   - Add some missing XFS quota command types to the SELinux quota
     access controls.

   - Fix a problem where we were not updating the seq_file position
     index correctly in selinuxfs.

   - We consolidate some duplicated code into helper functions.

   - A number of list to array conversions.

   - Update Stephen Smalley's email address in MAINTAINERS"

* tag 'selinux-pr-20200330' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
  selinux: clean up indentation issue with assignment statement
  NFS: Ensure security label is set for root inode
  MAINTAINERS: Update my email address
  selinux: avtab_init() and cond_policydb_init() return void
  selinux: clean up error path in policydb_init()
  selinux: remove unused initial SIDs and improve handling
  selinux: reduce the use of hard-coded hash sizes
  selinux: Add xfs quota command types
  selinux: optimize storage of filename transitions
  selinux: factor out loop body from filename_trans_read()
  security: selinux: allow per-file labeling for bpffs
  selinux: generalize evaluate_cond_node()
  selinux: convert cond_expr to array
  selinux: convert cond_av_list to array
  selinux: convert cond_list to array
  selinux: sel_avc_get_stat_idx should increase position index
  selinux: allow kernfs symlinks to inherit parent directory context
  selinux: simplify evaluate_cond_node()
  Documentation,selinux: deprecate setting checkreqprot to 1
  selinux: move status variables out of selinux_ss

Pull audit updates from Paul Moore:
 "We've got two audit patches for the v5.7 merge window with a stellar
  14 lines changed between the two patches. The patch descriptions are
  far more lengthy than the patches themselves, which is a very good
  thing for patches this size IMHO. The patches pass our test suites and
  a quick summary is below:

   - Stop logging inode information when updating an audit file watch.

     Since we are not changing the inode, or the fact that we are
     watching the associated file, the inode information is just noise
     that we can do without.

   - Fix a problem where mandatory audit records were missing their
     accompanying audit records (e.g. SYSCALL records were missing).

     The missing records often meant that we didn't have the necessary
     context to understand what was going on when the event occurred"

* tag 'audit-pr-20200330' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
  audit: trigger accompanying records when no rules present
  audit: CONFIG_CHANGE don't log internal bookkeeping as an event

Pull cifs updates from Steve French:
 "First part of cifs/smb3 changes for merge window (others are still
  being tested). Various RDMA (smbdirect) fixes, addition of SMB3.1.1
  POSIX support in readdir, 3 fixes for stable, and a fix for flock.

  Summary:

  New feature:
   - SMB3.1.1 POSIX support in readdir

  Fixes:
   - various RDMA (smbdirect) fixes
   - fix for flock
   - fallocate fix
   - some improved mount warnings
   - two timestamp related fixes
   - reconnect fix
   - three fixes for stable"

* tag '5.7-rc-smb3-fixes-part1' of git://git.samba.org/sfrench/cifs-2.6: (28 commits)
  cifs: update internal module version number
  cifs: Allocate encryption header through kmalloc
  cifs: smbd: Check and extend sender credits in interrupt context
  cifs: smbd: Calculate the correct maximum packet size for segmented SMBDirect send/receive
  smb3: use SMB2_SIGNATURE_SIZE define
  CIFS: Fix bug which the return value by asynchronous read is error
  CIFS: check new file size when extending file by fallocate
  SMB3: Minor cleanup of protocol definitions
  SMB3: Additional compression structures
  SMB3: Add new compression flags
  cifs: smb2pdu.h: Replace zero-length array with flexible-array member
  cifs: clear PF_MEMALLOC before exiting demultiplex thread
  cifs: cifspdu.h: Replace zero-length array with flexible-array member
  CIFS: Warn less noisily on default mount
  fs/cifs: fix gcc warning in sid_to_id
  cifs: allow unlock flock and OFD lock across fork
  cifs: do d_move in rename
  cifs: add SMB2_open() arg to return POSIX data
  cifs: plumb smb2 POSIX dir enumeration
  cifs: add smb2 POSIX info level
  ...

Pull gfs2 updates from Bob Peterson:
 "We've got a lot of patches (39) for this merge window. Most of these
  patches are related to corruption that occurs when journals are
  replayed. For example:

   1. A node fails while writing to the file system.
   2. Other nodes use the metadata that was once used by the failed
      node.
   3. When the node returns to the cluster, its journal is replayed, but
      the older metadata blocks overwrite the changes from step 2.

  Summary:

   - Fixed the recovery sequence to prevent corruption during journal
     replay.

   - Many bug fixes found during recovery testing.

   - New improved file system withdraw sequence.

   - Fixed how resource group buffers are managed.

   - Fixed how metadata revokes are tracked and written.

   - Improve processing of IO errors hit by daemons like logd and
     quotad.

   - Improved error checking in metadata writes.

   - Fixed how qadata quota data structures are managed"

* tag 'gfs2-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: (39 commits)
  gfs2: Fix oversight in gfs2_ail1_flush
  gfs2: change from write to read lock for sd_log_flush_lock in journal replay
  gfs2: instrumentation wrt ail1 stuck
  gfs2: don't lock sd_log_flush_lock in try_rgrp_unlink
  gfs2: Remove unnecessary gfs2_qa_{get,put} pairs
  gfs2: Split gfs2_rsqa_delete into gfs2_rs_delete and gfs2_qa_put
  gfs2: Change inode qa_data to allow multiple users
  gfs2: eliminate gfs2_rsqa_alloc in favor of gfs2_qa_alloc
  gfs2: Switch to list_{first,last}_entry
  gfs2: Clean up inode initialization and teardown
  gfs2: Additional information when gfs2_ail1_flush withdraws
  gfs2: leaf_dealloc needs to allocate one more revoke
  gfs2: allow journal replay to hold sd_log_flush_lock
  gfs2: don't allow releasepage to free bd still used for revokes
  gfs2: flesh out delayed withdraw for gfs2_log_flush
  gfs2: Do proper error checking for go_sync family of glops functions
  gfs2: Don't demote a glock until its revokes are written
  gfs2: drain the ail2 list after io errors
  gfs2: Withdraw in gfs2_ail1_flush if write_cache_pages fails
  gfs2: Do log_flush in gfs2_ail_empty_gl even if ail list is empty
  ...

Pull btrfs updates from David Sterba:
 "A number of core changes that make things work better in general, code
  is simpler and cleaner.

  Core changes:

   - per-inode file extent tree, for in memory tracking of contiguous
     extent ranges to make sure i_size adjustments are accurate

   - tree root structures are protected by reference counts, replacing
     SRCU that did not cover some cases

   - leak detector for tree root structures

   - per-transaction pinned extent tracking

   - buffer heads are replaced by bios for super block access

   - speedup of extent back reference resolution, on an example test
     scenario the runtime of send went down from a hour to minutes

   - factor out locking scheme used for subvolume writer and NOCOW
     exclusion, abstracted as DREW lock, double reader-writer exclusion
     (allow either readers or writers)

   - cleanup and abstract extent allocation policies, preparation for
     zoned device support

   - make reflink/clone_range work on inline extents

   - add more cancellation point for relocation, improves long response
     from 'balance cancel'

   - add page migration callback for data pages

   - switch to guid for uuids, with additional cleanups of the interface

   - make ranged full fsyncs more efficient

   - removal of obsolete ioctl flag BTRFS_SUBVOL_CREATE_ASYNC

   - remove b-tree readahead from delayed refs paths, avoiding seek and
     read unnecessary blocks

  Features:

   - v2 of ioctl to delete subvolumes, allowing to delete by id and more
     future extensions

  Fixes:

   - fix qgroup rescan worker that could block umount

   - fix crash during unmount due to race with delayed inode workers

   - fix dellaloc flushing logic that could create unnecessary chunks
     under heavy load

   - fix missing file extent item for hole after ranged fsync

   - several fixes in relocation error handling

  Other:

   - more documentation of relocation, device replace, space
     reservations

   - many random cleanups"

* tag 'for-5.7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (210 commits)
  btrfs: fix missing semaphore unlock in btrfs_sync_file
  btrfs: use nofs allocations for running delayed items
  btrfs: sysfs: Use scnprintf() instead of snprintf()
  btrfs: do not resolve backrefs for roots that are being deleted
  btrfs: track reloc roots based on their commit root bytenr
  btrfs: restart relocate_tree_blocks properly
  btrfs: reloc: reorder reservation before root selection
  btrfs: do not readahead in build_backref_tree
  btrfs: do not use readahead for running delayed refs
  btrfs: Remove async_transid from btrfs_mksubvol/create_subvol/create_snapshot
  btrfs: Remove transid argument from btrfs_ioctl_snap_create_transid
  btrfs: Remove BTRFS_SUBVOL_CREATE_ASYNC support
  btrfs: kill the subvol_srcu
  btrfs: make btrfs_cleanup_fs_roots use the radix tree lock
  btrfs: don't take an extra root ref at allocation time
  btrfs: hold a ref on the root on the dead roots list
  btrfs: make inodes hold a ref on their roots
  btrfs: move the root freeing stuff into btrfs_put_root
  btrfs: move ino_cache_inode dropping out of btrfs_free_fs_root
  btrfs: make the extent buffer leak check per fs info
  ...

Pull fscrypt updates from Eric Biggers:
 "Add an ioctl FS_IOC_GET_ENCRYPTION_NONCE which retrieves a file's
  encryption nonce.

  This makes it easier to write automated tests which verify that
  fscrypt is doing the encryption correctly"

* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt:
  ubifs: wire up FS_IOC_GET_ENCRYPTION_NONCE
  f2fs: wire up FS_IOC_GET_ENCRYPTION_NONCE
  ext4: wire up FS_IOC_GET_ENCRYPTION_NONCE
  fscrypt: add FS_IOC_GET_ENCRYPTION_NONCE ioctl

Pull x86 vmware updates from Ingo Molnar:
 "The main change in this tree is the addition of 'steal time clock
  support' for VMware guests"

* 'x86-vmware-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/vmware: Use bool type for vmw_sched_clock
  x86/vmware: Enable steal time accounting
  x86/vmware: Add steal time clock support for VMware guests
  x86/vmware: Remove vmware_sched_clock_setup()
  x86/vmware: Make vmware_select_hypercall() __init

Pull x86 mm updates from Ingo Molnar:
 "A handful of changes:

   - two memory encryption related fixes

   - don't display the kernel's virtual memory layout plaintext on
     32-bit kernels either

   - two simplifications"

* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm: Remove the now redundant N_MEMORY check
  dma-mapping: Fix dma_pgprot() for unencrypted coherent pages
  x86: Don't let pgprot_modify() change the page encryption bit
  x86/mm/kmmio: Use this_cpu_ptr() instead get_cpu_var() for kmmio_ctx
  x86/mm/init/32: Stop printing the virtual memory layout