- 24 Apr, 2008 40 commits
-
-
Michael Krufky authored
Signed-off-by:
Michael Krufky <mkrufky@linuxtv.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab@infradead.org>
-
Michael Krufky authored
Convert cx88-dvb and saa7134-dvb to use tuner-simple instead of dvb-pll for Philips TUV1236D Signed-off-by:
-
Michael Krufky authored
Convert saa7134-dvb to use tuner-simple instead of dvb-pll for Philips TD1316 Signed-off-by:
-
Michael Krufky authored
Convert cxusb, cx88-dvb and saa7134-dvb to use tuner-simple instead of dvb-pll for Philips FMD1216ME Signed-off-by:
-
Michael Krufky authored
Convert cx88-dvb, dvb-bt8xx, b2c2-flexcop, cxusb and cx23885 to use tuner-simple instead of dvb-pll for LG TDVS-H06xF Signed-off-by:
-
Michael Krufky authored
Convert dvb-bt8xx to use tuner-simple instead of dvb-pll for Philips FCV1236D Signed-off-by:
-
Michael Krufky authored
Convert cx88-dvb to use tuner-simple instead of dvb-pll for Thomson FE6600 Signed-off-by:
-
Michael Krufky authored
Convert cx88-dvb to use tuner-simple instead of dvb-pll for Microtune 4042 FI5 Signed-off-by:
-
Michael Krufky authored
Convert cx88-dvb to use tuner-simple instead of dvb-pll for Thomson DTT 761X Signed-off-by:
-
Michael Krufky authored
Add module options to tuner-simple, called "atv_input" and "dtv_input" to specify which rf input to use on devices with multiple rf inputs. If the module option is not specified, then the driver will autoselect the rf input, as per previous behavior. Signed-off-by:
-
Guennadi Liakhovetski authored
In case of muliple cameras, handled by the same driver, they can support Signed-off-by: -
Douglas Schilling Landgraf authored
Removed unnecessary VIDIOC_G_PRIORITY validation. Signed-off-by:
Douglas Schilling Landgraf <dougsland@gmail.com> Signed-off-by:
-
Douglas Schilling Landgraf authored
Added macro CONFIG_COMPAT for v4l_compat_ioctl32. Signed-off-by:
-
Tobias Lorenz authored
This patch fixes several kernel oops, when unplugging device while it is in use: Basically the patch delays freeing of the internal variables in si470x_usb_driver_disconnect, until the the last user closed the device in si470x_fops_release. This was implemented a while ago with the help of Oliver Neukum. I tested the patch five times (unplugging while in use) without oops coming from the radio-si470x driver anymore. A remaining oops was coming from the usbaudio driver, but this is someone else task. Hopefully this fixed all unplugging issues. Signed-off-by:
Tobias Lorenz <tobias.lorenz@gmx.net> Signed-off-by:
-
Mauro Carvalho Chehab authored
The video_dev parameter, on tuner-xc2028 were used to pass i2c private data to tuner_callback. Since the driver already have a pointer to i2c_adap->algo_data, uses this instead. This parameter were used also as a magic number to idenfity if two drivers are trying to register the same xc3028 tuner. This occurs with boards with DVB support, where both DVB and V4L drivers will share the same tuner. Instead of using the algo_data as a private number, after this patch, the driver will use i2c_adap->dev, with seems more consistent. Signed-off-by: -
Mauro Carvalho Chehab authored
Adds a consistency check to avoid OOPS, if tuner_callback priv argument is NULL. Also, simplifies callback codes on cx88. Signed-off-by: -
Hartmut Hackmann authored
The pointer transferred directly points to the saa7134_dev structure Signed-off-by:
Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by:
-
Hartmut Hackmann authored
The ISL6405 LNB supply is used on several Creatix / Medion cards. But only the MD8800 needs its second section. So don't start it unless it is needed. Signed-off-by:
-
Alan McIvor authored
This patch fixes reported problems when trying to add a 9th device into a system. Signed-off-by:
Alan McIvor <alan.mcivor@reveal.co.nz> Signed-off-by:
-
Hartmut Hackmann authored
Tuner refactoring broke support of tuners with LNA configurations 1 and 2 for both, analog TV and DVB-T. Additionally, this patch initializes the saa713x gpios defined by the gpiomask at driver init to avoid undefined stated at dvb. Signed-off-by:
-
Hartmut Hackmann authored
There are some restrictions: - The 2nd DVB-S section will only work if the 1st is configured for DVB-S too. so "options saa7134-dvb use_frontend=0,1" won't work. - Currently it is not possible to set the higher LNB supply voltages, so 14V instead of 13V in the 2nd section. - It is not possibe to turn off the 2nd LNB supply independently. This comes from the problem that the 2nd section can't access the i2c interface of the LNB supply chip. Signed-off-by:
-
Hartmut Hackmann authored
Signed-off-by:
-
Hartmut Hackmann authored
In the case of an access error to the high latency registers of the audio DSP, the interface needs to be cleared, otherwise a cascade of errors occurs. This patch is closely modeled after a proposal by Mirek Slugen Signed-off-by:
-
Andrew Morton authored
drivers/media/video/bt8xx/bttv-cards.c:3030:38: warning: "/*" within comment drivers/media/video/bt8xx/bttv-cards.c:3032:20: warning: "/*" within comment Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Mauro Carvalho Chehab authored
If left in blank, the driver will use value 0 (Temic PAL) Signed-off-by: -
Mauro Carvalho Chehab authored
Tuner addresses were incorrect. Fix the entries. Signed-off-by: -
Michael Krufky authored
Signed-off-by:
-
Michael Krufky authored
All standard related configuration is stored within struct tda18271_std_map_item. Pass a pointer to this structure rather than its individual members. Signed-off-by:
-
Michael Krufky authored
Add attach-time parameter, "small_i2c" to limit i2c transfer size to write at most 16 registers at a time during initialization. Signed-off-by:
-
Michael Krufky authored
TUNER_PHILIPS_ATSC is an ambiguous name for a tuner. Rename it to TUNER_PHILIPS_FCV1236D to be more descriptive. Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
-
Michael Krufky authored
We currently do not have a method to enable instance staring if i2c adapter is NULL, in the cases of dvb demods that write to the tuner directly using calc_regs. Prevent possible wrong instance sharing for these cases until a better solution can be found. Signed-off-by:
-
Guennadi Liakhovetski authored
flags used for spinlocks don't need to be initialized, except where the compiler has no way to see, that the spin_unlock_irqrestore is only called if the spin_lock_irqsave has been called before. Local variable initialization doesn't have to be protected. Signed-off-by:
Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> Reviewed-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Mauro Carvalho Chehab authored
As reported by Roel Kluin <12o3l@tiscali.nl>: in drivers/media/radio/radio-sf16fmr2.c:319: for (i = 0; i < ARRAY_SIZE(radio_qctrl); i++) { if ((fmr2->card_type != 11) && V4L2_CID_AUDIO_VOLUME) radio_qctrl[i].step = 65535; ... I don't understand this '&& V4L2_CID_AUDIO_VOLUME' While fixing this issue, I've revisited the volume control code and fixed CodingStyle on the changed procedures. Signed-off-by: -
Guennadi Liakhovetski authored
Make the dev member of the struct videobuf_queue of type "struct device *" to avoid future problems. Also change the prototype of the videobuf_queue_core_init() function. Signed-off-by:
-
Mauro Carvalho Chehab authored
tuner-xc2028 needs to know when a DVB module is sharing the same analog tuner. This is done by comparing a magic number that needs to be the same on analog and on digital. To make easier, this magic number is a pointer to some data struct. With the previous code, two different pointers were using, causing a miss-detection. Signed-off-by: -
Guennadi Liakhovetski authored
The dev element of the struct videobuf_queue is now of type struct device implicitly. Fix left-over casts. Signed-off-by:
-
Roel Kluin authored
logical-bitwise & confusion Signed-off-by:
Roel Kluin <12o3l@tiscali.nl> Signed-off-by:
-
Mauro Carvalho Chehab authored
Signed-off-by: -
Mauro Carvalho Chehab authored
This board works only with non-mts firmware Signed-off-by:
-
