- 09 May, 2020 1 commit
-
-
Marco Felsch authored
Since commit b6eba860 ("Input: edt-ft5x06 - add offset support for ev-ft5726") offset-x and offset-y is supported. Devices using those offset parameters don't support the offset parameter so we need to add the NO_REGISTER check for edt_ft5x06_ts_get_defaults(). Fixes: b6eba860 ("Input: edt-ft5x06 - add offset support for ev-ft5726") Signed-off-by:
Marco Felsch <m.felsch@pengutronix.de> Link: https://lore.kernel.org/r/20200227112819.16754-2-m.felsch@pengutronix.deSigned-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 28 Apr, 2020 3 commits
-
-
Rajat Jain authored
Allow the firmware to specify the mapping between the scan code and the linux keycode. This takes the form of a "linux,keymap" property which is an array of u32 values, each value specifying mapping for a key. Signed-off-by:
Rajat Jain <rajatja@google.com> Link: https://lore.kernel.org/r/20200427210259.91330-3-rajatja@google.comSigned-off-by:
-
Rajat Jain authored
Certain keyboards have their top-row keys intended for actions such as "Browser back", "Browser Refresh", "Fullscreen" etc as their primary mode, thus they will send scan codes for those actions. Further, they don't have a dedicated "Fn" key so don't have the capability to generate function key codes (e.g. F1, F2 etc..). However in this case, if userspace still wants to "synthesize" those function keys using the top row action keys, it needs to know the physical position of the top row keys. (Essentially a mapping between usage codes and a physical location in the top row). This patch enhances the atkbd driver to receive such a mapping from the firmware / device tree, and expose it to userspace in the form of a function-row-physmap attribute. The attribute would be a space separated ordered list of physical codes, for the keys in the function row, in left-to-right order. The attribute will only be present if the kernel knows about such mapping, otherwise the attribute shall not be visible. Signed-off-by:
-
Rajat Jain authored
Attach the firmware node to the serio i8042 kbd device so that device properties can be passed from the firmware. Signed-off-by:
-
- 25 Apr, 2020 2 commits
-
-
Stephan Gerhold authored
MMS345L is another first generation touch screen from Melfas, which uses mostly the same registers as MMS152. However, there is some garbage printed during initialization. Apparently MMS345L does not have the MMS152_COMPAT_GROUP register that is read+printed during initialization. TSP FW Rev: bootloader 0x6 / core 0x26 / config 0x26, Compat group: \x06 On earlier kernel versions the compat group was actually printed as an ASCII control character, seems like it gets escaped now. But we probably shouldn't print something from a random register. Add a separate "melfas,mms345l" compatible that avoids reading from the MMS152_COMPAT_GROUP register. This might also help in case there is some other device-specific quirk in the future. Signed-off-by:
Stephan Gerhold <stephan@gerhold.net> Reviewed-by:
Andi Shyti <andi@etezian.org> Link: https://lore.kernel.org/r/20200423102431.2715-1-stephan@gerhold.netSigned-off-by:
-
Stephan Gerhold authored
The mms114 driver now supports MMS345L; document the melfas,mms345l binding that is used for it. Signed-off-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200423102431.2715-2-stephan@gerhold.netSigned-off-by:
-
- 19 Apr, 2020 4 commits
-
-
Linus Walleij authored
There is now an IIO driver for GP2AP002A00F and GP2AP002S00F in drivers/iio/light/gp2ap002.c. Delete this driver, it is unused in the kernel tree and new users can make use of the IIO driver. Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20200417203059.8151-1-linus.walleij@linaro.orgSigned-off-by:
-
Kenny Levinsen authored
Some processes, such as systemd, are only polling for EPOLLERR|EPOLLHUP. As evdev uses unkeyed wakeups, such a poll receives many spurious wakeups from uninteresting events. Use keyed wakeups to allow the wakeup target to more efficiently discard these uninteresting events. Signed-off-by:
Kenny Levinsen <kl@kl.wtf> Link: https://lore.kernel.org/r/20200410233557.3892-1-kl@kl.wtfSigned-off-by:
-
Christophe JAILLET authored
A 'y' is missing in spear-keyboard. Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/20200412095711.9107-1-christophe.jaillet@wanadoo.frSigned-off-by:
-
Christophe JAILLET authored
This should be 'tca6416', not 'tca6146' Signed-off-by:
-
- 01 Apr, 2020 3 commits
-
-
Rajat Jain authored
Replace the /* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ with /* SPDX-License-Identifier: GPL-2.0-only WITH Linux-syscall-note */ to help coreboot community consume this file without relaxing their licensing checks. Signed-off-by:
-
Hans de Goede authored
The Acer Aspire 5738z has a button to disable (and re-enable) the touchpad next to the touchpad. When this button is pressed a LED underneath indicates that the touchpad is disabled (and an event is send to userspace and GNOME shows its touchpad enabled / disable OSD thingie). So far so good, but after re-enabling the touchpad it no longer works. The laptop does not have an external ps2 port, so mux mode is not needed and disabling mux mode fixes the touchpad no longer working after toggling it off and back on again, so lets add this laptop model to the nomux list. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20200331123947.318908-1-hdegoede@redhat.com Cc: stable@vger.kernel.org Signed-off-by:
-
Hans de Goede authored
acpi_evaluate_object() and acpi_execute_simple_method() are not part of the group of ACPI related functions which get stubbed by include/linux/acpi.h when ACPI support is disabled, so the IRQ_PIN_ACCESS_ACPI_METHOD handling code must be stubbed out. For consistency use the same #if condition as which is used to replace goodix_add_acpi_gpio_mappings with a stub. Fixes: c5fca485 ("Input: goodix - add support for controlling the IRQ pin through ACPI methods") Reported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
Bastien Nocera <hadess@hadess.net> Signed-off-by:
-
- 24 Mar, 2020 21 commits
-
-
Benjamin Gaignard authored
Convert the EDT-FT5x06 to DT schema using json-schema. Signed-off-by:
Benjamin Gaignard <benjamin.gaignard@st.com> Reviewed-by:
-
Andy Shevchenko authored
The 'axis + 1' calculation is implicit and potentially error prone. Moreover, few lines before the axis is set explicitly for both X and Y. Do the same when retrieving different properties for X and Y. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20200303180917.12563-1-andriy.shevchenko@linux.intel.comSigned-off-by:
-
Yannick Fertre authored
Add support for it by adding compatible and supported chip data (default settings used). The chip data on GT9147 is similar to GT912, like - config data register has 0x8047 address - config data register max len is 240 - config data checksum has 8-bit Signed-off-by:
Yannick Fertre <yannick.fertre@st.com> Reviewed-by:
-
Yannick Fertre authored
Add support for it by adding compatible. The chip data on GT9147 is similar to GT912, like - config data register has 0x8047 address - config data register max len is 240 - config data checksum has 8-bit Signed-off-by:
-
Icenowy Zheng authored
Goodix GT917S is a touchscreen chip from Goodix that is in the GT1x family. Add its support by assigning the gt1x config to it. Signed-off-by:
Icenowy Zheng <icenowy@aosc.io> Reviewed-by:
-
Icenowy Zheng authored
For Goodix GT917S chip, the chip ID string is "917S", which contains not only numbers now. Use string-based chip ID in the driver to support this chip and further chips with alphanumber ID. Signed-off-by:
-
Icenowy Zheng authored
Goodix GT917S is a new touchscreen chip from Goodix. Add its compatible string to the device tree binding. Signed-off-by:
-
Dmitry Mastykin authored
Some devices with a goodix touchscreen have more then 1 capacitive touch-key. This commit replaces the current support for a single touch-key, which ignored the reported key-code. With support for up to 7 touch-keys, based upon checking the key-code which is post-fixed to any reported touch-data. KEY_LEFTMETA is assigned to the first touch-key (it will still be the default keycode for devices with a single touch-key). KEY_F1, KEY_F2... are assigned as default keycode for the other touch-keys. This commit also add supports for keycode remapping, so that systemd-udev's hwdb can be used to remap the codes to send keycodes to match the icons on the buttons for devices with more then 1 touch-key. Signed-off-by:
Dmitry Mastykin <dmastykin@astralinux.ru> Reviewed-by:
-
Dmitry Mastykin authored
The goodix panel sends spurious interrupts after a 'finger up' event, which always cause a timeout. We were exiting the interrupt handler by reporting touch_num == 0, but this was still processed as valid and caused the code to use the uninitialised point_data, creating spurious key release events. Report an error from the interrupt handler so as to avoid processing invalid point_data further. Signed-off-by:
-
Hans de Goede authored
On some ACPI/x86 devices (where we use one of the ACPI IRQ pin access methods) the firmware is buggy, it does not properly reset the controller at boot, and we cannot communicate with it. Normally on ACPI/x86 devices we do not want to reset the controller at probe time since in some cases this causes the controller to loose its configuration and this is loaded into it by the system's firmware. So on these systems we leave the reset_controller_at_probe flag unset, even though we have a access to both the IRQ and reset pins and thus could reset it. In the case of the buggy firmware we have to reset the controller to actually be able to talk to it. This commit adds a special case for this, if the goodix_i2c_test() fails, and we have not reset the controller yet; and we do have a way to reset the controller then retry the i2c-test after resetting the controller. This fixes the driver failing at probe on ACPI/x86 systems with this firmware bug. Reported-and-tested-by:
-
Hans de Goede authored
Some devices, e.g the Trekstor Primetab S11B, lose there config over a suspend/resume cycle (likely the controller loses power during suspend). This commit reads back the config version on resume and if matches the expected config version it resets the controller and resends the config we read back and saved at probe time. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1786317 BugLink: https://github.com/nexus511/gpd-ubuntu-packages/issues/10 BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=199207Reviewed-by:
-
Hans de Goede authored
Make goodix_send_cfg() take a raw buffer as argument instead of a struct firmware *cfg, so that it can also be used to restore the config on resume if necessary. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1786317 BugLink: https://github.com/nexus511/gpd-ubuntu-packages/issues/10 BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=199207Reviewed-by:
-
Hans de Goede authored
Our goodix_check_cfg_* helpers do things like: int i, raw_cfg_len = cfg->size - 2; ... if (check_sum != cfg->data[raw_cfg_len]) { When cfg->size < 2, this will end up indexing the cfg->data array with a negative value, which will not end well. To fix this this commit adds a new GOODIX_CONFIG_MIN_LENGTH define and adds a minimum size check for firmware-config files using this new define. For consistency this commit also adds a new GOODIX_CONFIG_GT9X_LENGTH for the length used for recent gt9xx and gt1xxx chips, instead of using GOODIX_CONFIG_MAX_LENGTH for this, so that if other length defines get added in the future it will be clear that the MIN and MAX defines should contain the min and max values of all the other defines. Signed-off-by: -
Hans de Goede authored
Save a copy of the config in goodix_read_config(), this is a preparation patch for restoring the config if it was lost after a supend/resume cycle. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1786317 BugLink: https://github.com/nexus511/gpd-ubuntu-packages/issues/10 BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=199207Reviewed-by:
-
Hans de Goede authored
Move the defines to above the struct goodix_ts_data declaration, so that the MAX defines can be used inside the struct goodix_ts_data declaration. No functional changes, just moving a block of code. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1786317 BugLink: https://github.com/nexus511/gpd-ubuntu-packages/issues/10 BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=199207Reviewed-by:
-
Hans de Goede authored
Some Apollo Lake (x86, UEFI + ACPI) devices only list the reset GPIO in their _CRS table and the bit-banging of the IRQ line necessary to wake-up the controller from suspend can be done by calling 2 Goodix custom / specific ACPI methods. This commit adds support for controlling the IRQ line in this matter, allowing us to properly suspend the touchscreen controller on such devices. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1786317 BugLink: https://github.com/nexus511/gpd-ubuntu-packages/issues/10 BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=199207Reviewed-by:
-
Hans de Goede authored
On most Bay Trail (x86, UEFI + ACPI) devices the ACPI tables do not have a _DSD with a "daffd814-6eba-4d8c-8a91-bc9bbf4aa301" UUID, adding "irq-gpios" and "reset-gpios" mappings, so we cannot get the GPIOS by name without first manually adding mappings ourselves. These devices contain 2 GpioIo resource in their _CRS table, on all 4 such devices which I have access to, the order of the 2 GPIOs is reset, int. Note that the GPIO to which the touchscreen controller irq pin is connected is configured in direct-irq mode on these Bay Trail devices, the pinctrl-baytrail.c driver still allows controlling the pin as a GPIO in this case, but this is not necessarily the case on other X86 ACPI platforms, nor do we have a guarantee that the GPIO order is the same elsewhere, so we limit the use of a _CRS table with 2 GpioIo resources to Bay Trail devices only. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1786317 BugLink: https://github.com/nexus511/gpd-ubuntu-packages/issues/10 BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=199207Reviewed-by:
-
Hans de Goede authored
On most Cherry Trail (x86, UEFI + ACPI) devices the ACPI tables do not have a _DSD with a "daffd814-6eba-4d8c-8a91-bc9bbf4aa301" UUID, adding "irq-gpios" and "reset-gpios" mappings, so we cannot get the GPIOS by name without first manually adding mappings ourselves. These devices contain 1 GpioInt and 1 GpioIo resource in their _CRS table: Method (_CRS, 0, NotSerialized) // _CRS: Current Resource Settings { Name (RBUF, ResourceTemplate () { I2cSerialBusV2 (0x0014, ControllerInitiated, 0x00061A80, AddressingMode7Bit, "\\_SB.PCI0.I2C2", 0x00, ResourceConsumer, , Exclusive, ) GpioInt (Edge, ActiveLow, Shared, PullDefault, 0x0000, "\\_SB.GPO1", 0x00, ResourceConsumer, , ) { // Pin list 0x0013 } GpioIo (Shared, PullDefault, 0x0000, 0x0000, IoRestrictionOutputOnly, "\\_SB.GPO1", 0x00, ResourceConsumer, , ) { // Pin list 0x0019 } }) Return (RBUF) /* \_SB_.PCI0.I2C2.TCS1._CRS.RBUF */ } There is no fixed order for these 2. This commit adds code to check that there is 1 of each as expected and then registers a mapping matching their order using devm_acpi_dev_add_driver_gpios(). This gives us access to both GPIOs allowing us to properly suspend the controller during suspend, and making it possible to reset the controller if necessary. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1786317 BugLink: https://github.com/nexus511/gpd-ubuntu-packages/issues/10 BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=199207Signed-off-by: -
Hans de Goede authored
Before this commit we would always reset the controller at probe when we have access to the GPIOs which are necessary to do a reset. Doing the reset requires access to the GPIOs, but just because we have access to the GPIOs does not mean that we should always reset the controller at probe. On X86 ACPI platforms the BIOS / UEFI firmware will already have reset the controller and it will have loaded the device specific config into the controller. Doing the reset sometimes causes the controller to lose its configuration, so on X86 ACPI platforms this is not a good idea. This commit adds a new reset_controller_at_probe boolean to control the reset at probe behavior. This commits sets the new bool to true when we set irq_pin_access_method to IRQ_PIN_ACCESS_GPIO, so there are no functional changes. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1786317 BugLink: https://github.com/nexus511/gpd-ubuntu-packages/issues/10 BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=199207Reviewed-by:
-
Hans de Goede authored
At least on X86 ACPI platforms it is not necessary to load the touchscreen controller config from disk, if it needs to be loaded this has already been done by the BIOS / UEFI firmware. Even on other (e.g. devicetree) platforms the config-loading as currently done has the issue that the loaded cfg file is based on the controller model, but the actual cfg is device specific, so the cfg files are not part of linux-firmware and this can only work with a device specific OS image which includes the cfg file. And we do not need access to the GPIOs at all to load the config, if we do not have access we can still load the config. So all in all tying the decision to try to load the config from disk to being able to access the GPIOs is not desirable. This commit adds a new load_cfg_from_disk boolean to control the firmware loading instead. This commits sets the new bool to true when we set irq_pin_access_method to IRQ_PIN_ACCESS_GPIO, so there are no functional changes. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1786317 BugLink: https://github.com/nexus511/gpd-ubuntu-packages/issues/10 BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=199207Reviewed-by:
-
Hans de Goede authored
Suspending Goodix touchscreens requires changing the interrupt pin to output before sending them a power-down command. Followed by wiggling the interrupt pin to wake the device up, after which it is put back in input mode. So far we have only effectively supported this on devices which use devicetree. On X86 ACPI platforms both looking up the pins; and using a pin as both IRQ and GPIO is a bit more complicated. E.g. on some devices we cannot directly access the IRQ pin as GPIO and we need to call ACPI methods to control it instead. This commit adds a new irq_pin_access_method field to the goodix_chip_data struct and adds goodix_irq_direction_output and goodix_irq_direction_input helpers which together abstract the GPIO accesses to the IRQ pin. This is a preparation patch for adding support for properly suspending the touchscreen on X86 ACPI platforms. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1786317 BugLink: https://github.com/nexus511/gpd-ubuntu-packages/issues/10 BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=199207Signed-off-by:
-
- 06 Mar, 2020 2 commits
-
-
Johnny Chuang authored
This patch supports reporting resolution for ABS_MT_TOUCH_MAJOR event. This information is needed in showing pressure/width radius. Signed-off-by:
Johnny Chuang <johnny.chuang@emc.com.tw> Reviewed-by:
Harry Cutts <hcutts@chromium.org> Reviewed-by:
Peter Hutterer <peter.hutterer@who-t.net> Acked-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Link: https://lore.kernel.org/r/1582766000-23023-1-git-send-email-johnny.chuang.emc@gmail.comSigned-off-by:
-
Sergei A. Trusov authored
The touchscreen on the Cube I15-TC don't match the default display, with 0,0 touches being reported when touching at the top-right of the screen. Add a quirk to invert the x coordinate. Reported-and-tested-by:
Arkadiy <arkan49@yandex.ru> Signed-off-by:
Sergei A. Trusov <sergei.a.trusov@ya.ru> Reviewed-by:
-
- 01 Feb, 2020 1 commit
-
-
Lucas Stach authored
When the distance thresholds are set the controller must be in reduced reporting mode for them to have any effect on the interrupt generation. This has a potentially large impact on the number of events the host needs to process. Signed-off-by:
Lucas Stach <l.stach@pengutronix.de> Reviewed-by:
Andrew Duggan <aduggan@synaptics.com> Link: https://lore.kernel.org/r/20200120111628.18376-1-l.stach@pengutronix.deSigned-off-by:
-
- 27 Jan, 2020 2 commits
-
-
Benjamin Gaignard authored
Convert the Goodix binding to DT schema format using json-schema Signed-off-by:
-
Benjamin Gaignard authored
Add touchscreen schema for common properties Signed-off-by:
-
- 22 Jan, 2020 1 commit
-
-
Thomas Bogendoerfer authored
This patch adds a platform driver for supporting keyboard and mouse interface of SGI IOC3 chips. Signed-off-by:
Thomas Bogendoerfer <tbogendoerfer@suse.de> Link: https://lore.kernel.org/r/20200122135220.22354-1-tbogendoerfer@suse.deSigned-off-by:
-
