- 28 Jan, 2010 1 commit
-
-
Alexey Dobriyan authored
Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 27 Jan, 2010 21 commits
-
-
Joe Perches authored
Move "mpoa:%s: ", __func__/__FILE__ to #defines Remove mpoa __func__/__FILE__ from dprintk uses Add and use #define dprint_cont where appropriate Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Joe Perches authored
Reduce indentation in lec_arp_check_expire Indent a case label Remove != NULL logical tests from while ((skb = foo())) assign and tests Signed-off-by:
-
Joe Perches authored
Convert #include <asm... to #include <linux... Spacing cleanups Mostly 80 column wrapped Move trailing statements to new lines switch/case cleanups Signed-off-by:
-
Joe Perches authored
Mostly 80 column wrapped. Move embedded assigns out of tests Move trailing statements to new lines switch/case cleanups Signed-off-by:
-
Joe Perches authored
Spacing cleanups Mostly 80 column wrapped. Move embedded assigns out of tests Move trailing statements to new lines switch/case cleanups Signed-off-by:
-
Joe Perches authored
Spacing cleanups Mostly 80 column wrapped. Signed-off-by:
-
Joe Perches authored
Spacing cleanups Mostly 80 column wrapped. Move trailing statements to new lines Signed-off-by:
-
Joe Perches authored
Convert #include <asm... to #include <linux... Mostly 80 column wrapped. Spacing cleanups Move trailing statements to new lines switch/case cleanups Signed-off-by:
-
Joe Perches authored
Move embedded assigns out of tests Move trailing statements to new lines Move labels to column 1 Signed-off-by:
-
Joe Perches authored
Convert #include <asm... to #include <linux... Add printk argument verification to dprintk and ddprintk Spacing cleanups Mostly 80 column wrapped. Removed unnecessary breaks after returns Use %pI4 in seq_printf of IP address Signed-off-by:
-
Joe Perches authored
Convert #include <asm... to #include <linux... Add printk argument verification to dprintk and ddprintk Spacing cleanups Mostly 80 column wrapped. Signed-off-by:
-
Joe Perches authored
Convert #include <asm... to #include <linux... Add printk argument verification to dprintk and ddprintk Spacing cleanups Mostly 80 column wrapped. printk->pr_info and pr_cont Moved labels to column 1 Move trailing statements to new lines switch/case cleanups remove unnecessary breaks after returns Remove unnecessary braces around single line statements Signed-off-by:
-
Joe Perches authored
Convert #include <asm... to #include <linux... Mostly 80 column wrapped. Spacing cleanups Convert printks to pr_<level> Use print_hex_dump Move embedded assigns out of tests Move trailing statements to new lines Remove unnecessary braces around single line statements switch/case cleanups Removed paren around returns Use %pM Moved leading continuation logical tests to end of previous line Signed-off-by:
-
Joe Perches authored
Spacing cleanups Moved EXPORT_SYMBOL Mostly 80 column wrapped. switch/case cleanups Signed-off-by:
-
Joe Perches authored
Convert #include <asm... to #include <linux... Move EXPORT_SYMBOL Spacing cleanups Use __func__ in printks Indent switch/case statements Move trailing statements to new line Hoist assigns from if tests Signed-off-by:
-
Joe Perches authored
Convert #include <asm... to #include <linux... Spacing cleanups Move labels to column 1 Move logical continuation tests to end of previous line Signed-off-by:
-
Joe Perches authored
Convert #include <asm... to #include <linux... Use print_hex_dump Spacing cleanups Move logical continuation tests to end of previous line 80 column wrapping Move goto branch label to column 1 Remove unnecessary single statement braces Signed-off-by:
-
Joe Perches authored
Add space after for Indent switch/case statements 80 column wrapping Signed-off-by:
-
Joe Perches authored
Moved EXPORT_SYMBOL to follow definition Add space after commas Signed-off-by:
-
Joe Perches authored
Signed-off-by:
-
Joe Perches authored
Add #define pr_fmt(fmt) KBUILD_MODNAME ":%s: " fmt, __func__ Remove function names from output Use single line pr_debug instead of broken multiple uses without newline Signed-off-by:
-
- 26 Jan, 2010 1 commit
-
-
David S. Miller authored
References removed HAVE_MULTICAST. Reporeted-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
- 25 Jan, 2010 1 commit
-
-
Jiri Pirko authored
This patch introduces three macros to work with uc list from net drivers. Signed-off-by:
Jiri Pirko <jpirko@redhat.com> Signed-off-by:
-
- 23 Jan, 2010 15 commits
-
-
Jeff Kirsher authored
Based on patch from Sridhar Samudrala The following patch fixes the check for IPv6 GSO packet in ixgbevf driver to use skb_is_gso_v6(). SKB_GSO_DODGY is also set when packets are forwarded from a guest. CC: Sridhar Samudrala <sri@us.ibm.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Shan Wei authored
No matter whether connection track is enabled, an end host should send an ICMPv4 "Fragment Reassembly Timeout" message when defrag timeout. The reasons are following two points: 1. RFC 792 says: >>>> >> > > If a host reassembling a fragmented datagram cannot complete the >>>> >> > > reassembly due to missing fragments within its time limit it >>>> >> > > discards the datagram, and it may send a time exceeded message. >>>> >> > > >>>> >> > > If fragment zero is not available then no time exceeded need be >>>> >> > > sent at all. >>>> >> > > >>>> >> > > Read more: http://www.faqs.org/rfcs/rfc792.html#ixzz0aOXRD7Wp 2. Patrick McHardy also agrees with this opinion. :-) About the discussion of this opinion, refer to http://patchwork.ozlabs.org/patch/41649 The patch fixed the problem like this: When enabling connection track, fragments are received at PRE_ROUTING HOOK. If they are failed to reassemble, ip_expire() will be called. Before sending an ICMP "Fragment Reassembly Timeout" message, the patch searches router table to get the destination entry only for host type. The patch has been tested on both host type and route type. Signed-off-by:
Shan Wei <shanwei@cn.fujitsu.com> Signed-off-by:
-
Alexey Dobriyan authored
Signed-off-by:
-
Alexey Dobriyan authored
Signed-off-by:
-
Alexey Dobriyan authored
Simpily pass 'struct neigh_table' with seq_file private pointer, and save one dereference. Proc entry itself isn't interesting. Signed-off-by:
-
Alexey Dobriyan authored
After netdev_ops compat code HAVE_* macros aren't needed, in fact they _will_ result in compile breakage for out of tree drivers. Signed-off-by:
-
Greg Rose authored
When the VF detects that the PF has reset turn off carrier and stop all tx queues. Signed-off-by:
Greg Rose <gregory.v.rose@intel.com> Signed-off-by:
-
Greg Rose authored
Fix panics in the VF driver that occur when you bring it down after having already brought the PF down. Signed-off-by:
-
Greg Rose authored
When the VF driver gets a control message from the PF that indicates the PF is about to reset or go down we schedule the watchdog timer so that it will detect the PF has gone offline and take appropriate action. Signed-off-by:
-
Greg Rose authored
Inadequate coordination between the PF driver and the VF driver results in tx hangs in the VF driver when you perform certain actions that will lead to a re-init of the PF. Add feature to notify active VFs when the PF is about to re-initialize so that the VFs can take appropriate action. Signed-off-by:
-
Greg Rose authored
The PF Reset Done bit should not be set in the extended control register until the PF has actually completed the bring up process. It is a mis- interpretation of the purpose of this bit to assume it should be set when the physical reset of the device is done. Instead it should be used to indicate to the VFs when the PF is ready to provide them with required services. This is not until after the PF is finished coming up and ready to process mailbox events. Signed-off-by:
-
Greg Rose authored
This data storage for SW emulated MAC addresses is unlikely to ever be used so pull it. Signed-off-by:
-
Greg Rose authored
When VFs are allocated (as indicated by adapter->num_vfs is non-zero) then the PF pool is no longer zero. Instead it will be the same as the number of VFs allocated. When setting the VLVF entry for the PF we need to use the correct pool otherwise the PF will get VLAN packets from the wire because the packet will pass VFTA filtering and the PF has the default pool, but it will not get VLAN packets from the VFs because it has not set the correct pool bit in the VLVF entry. Signed-off-by:
-
David S. Miller authored
-
David S. Miller authored
-
- 22 Jan, 2010 1 commit
-
-
Sathya Perla authored
Pages are posted to the rxq in such a way that more than one frag can share the page. The last frag that uses the page unmaps the page. In the case when a page is not fully used (due to lack of space in rxq) the last frag that uses the page is not being set as a "last_page_user"; instead, the next frag in the rxq is incorrectly being set. The fix has also been tested on ppc64 with 64k pages... Signed-off-by:
Sathya Perla <sathyap@serverengines.com> Signed-off-by:
-
