- 22 May, 2012 19 commits
-
-
Arnaldo Carvalho de Melo authored
There was no easy way to see the frequency used, and with the change of default, we better provide one. [root@sandy linux]# perf evlist -F cycles: sample_freq=4000 [root@sandy linux]# perf evlist -v cycles: sample_freq=4000, size: 80, sample_type: 391, read_format: 7, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, sample_id_all: 1, exclude_guest: 1 [root@sandy linux]# Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-e1p9poez3nwrgycbmwqmhlsu@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Arnaldo Carvalho de Melo authored
Quoting Ingo: "While at it I'd also suggest increasing the default sampling frequency, from 1000 Hz per CPU to at least 4Khz auto-freq or so - this should work well all across the board I think. CPUs are getting faster and command/app run times are getting shorter, 1Khz is a bit low IMO." Requested-by: Ingo Molnar <mingo@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-2jafa6mkrufyekny9ei59lpu@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Stephane Eranian authored
In order for perf buildid-list to work with pipe-mode files, it needs to process buildids and event attr structs. $ perf record -o - noploop 2 | ./perf inject -b | perf buildid-list -i - -H noploop for 2 seconds [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.084 MB - (~3678 samples) ] 0000000000000000000000000000000000000000 [kernel.kallsyms] 3a0d0629efe74a8da3eeba372cdbd74ad9b8f5d5 /usr/local/bin/noploop The reason [kernel.kallsyms] shows a 0 build-id comes from the way buildids are injected in the stream. The buildid for the kernel is provided by a BUILD_ID record. The [kernel.kallsyms] is provided by a MMAP record. There is no clean and obvious way to link the two, unfortunately. In regular mode, the kernel buildid is generated from reading the ELF image or kallsyms and perf knows to associate [kernel.kallsyms] to it. Later on, when perf processes the [kernel.kallsyms] MMAP record, it will already have a dso for it. So for now, make sure perf buildid-list shows the buildids for everything but the kernel image. Signed-off-by: Stephane Eranian <eranian@google.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1337081295-10303-6-git-send-email-eranian@google.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Stephane Eranian authored
In __perf_session__process_pipe_events(), there was a risk we would read more than what a union perf_event struct can hold. this could happen in case, perf is reading a file which contains new record types it does not know about and which are larger than anything it knows about. In general, perf is supposed to skip records it does not understand, but in pipe mode, those have to be read and ignored. The fixed size header contains the size of the record, but that size may be larger than union perf_event, yet it was used as the backing to the read in: union perf_event event; void *p; size = event->header.size; p = &event; p += sizeof(struct perf_event_header); if (size - sizeof(struct perf_event_header)) { err = readn(self->fd, p, size - sizeof(struct perf_event_header)); We fix this by allocating a buffer based on the size reported in the header. We reuse the buffer as much as we can. We realloc in case it becomes too small. In the common case, the performance impact is negligible. Signed-off-by: Stephane Eranian <eranian@google.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1337081295-10303-3-git-send-email-eranian@google.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Stephane Eranian authored
perf inject -b was broken. It would not inject any build_id into the stream. Furthermore, it would strip samples from the stream. The reason was a missing initialization of the event attribute structure. The perf_tool.tool.attr() callback was pointing to a simple repipe. But there was no initialization of the internal data structures to keep track of events and event ids. That later caused event id lookups to fail, and sample would get removed. The patch simply adds back the call to perf_event__process_attr() to initialize the evlist structure and now build_ids are again injected. Signed-off-by: Stephane Eranian <eranian@google.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1337081295-10303-2-git-send-email-eranian@google.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Stephane Eranian authored
To match the PERF_RECORD_HEADER_TRACING_DATA record type. This is the same info as the one used for pipe mode whereas the other one is for regular file output. This will help in the later patch to add meta-data infos in pipe mode. Signed-off-by: Stephane Eranian <eranian@google.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1337081295-10303-4-git-send-email-eranian@google.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Jiri Olsa authored
The following union: union { u64 val64; u32 val32[2]; } u; is used on more than one place in perf code and will be used more in upcomming patches. Adding union u64_swap to have it defined globaly so we dont need to redefine it all the time. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: David Ahern <dsahern@gmail.com> Tested-by: David Ahern <dsahern@gmail.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1337151548-2396-4-git-send-email-jolsa@redhat.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Jiri Olsa authored
When the perf data file is read cross architectures, the perf_event__attr_swap function takes care about endianness of all the struct fields except the bitfield flags. The bitfield flags need to be transformed as well, since the bitfield binary storage differs for both endians. ABI says: Bit-fields are allocated from right to left (least to most significant) on little-endian implementations and from left to right (most to least significant) on big-endian implementations. The above seems to be byte specific, so we need to reverse each byte of the bitfield. 'Internet' also says this might be implementation specific and we probably need proper fix and carry perf_event_attr bitfield flags in separate data file FEAT_ section. Thought this seems to work for now. Note, running following to test perf endianity handling: test 1) - origin system: # perf record -a -- sleep 10 (any perf record will do) # perf report > report.origin # perf archive perf.data - copy the perf.data, report.origin and perf.data.tar.bz2 to a target system and run: # tar xjvf perf.data.tar.bz2 -C ~/.debug # perf report > report.target # diff -u report.origin report.target - the diff should produce no output (besides some white space stuff and possibly different date/TZ output) test 2) - origin system: # perf record -ag -fo /tmp/perf.data -- sleep 1 - mount origin system root to the target system on /mnt/origin - target system: # perf script --symfs /mnt/origin -I -i /mnt/origin/tmp/perf.data \ --kallsyms /mnt/origin/proc/kallsyms - complete perf.data header is displayed Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: David Ahern <dsahern@gmail.com> Tested-by: David Ahern <dsahern@gmail.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1337151548-2396-3-git-send-email-jolsa@redhat.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Anshuman Khandual authored
Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com> Acked-by: Stephane Eranian <eranian@google.com> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/4FB60C7A.2080508@linux.vnet.ibm.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Namhyung Kim authored
Add PERF_SAMPLE_CPU flag into attr->sample_type if an user specified any of cpu target (either system-wide or cpu list). It will show correct values when cpu sort key is given for perf top and perf report. Signed-off-by: Namhyung Kim <namhyung.kim@lge.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1337564527-9367-1-git-send-email-namhyung.kim@lge.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Namhyung Kim authored
Although perf depends on the libtraceevent, it cannot know when it needs to be rebuilt. So just try to rebuild it always in order to make sure we use the latest version. While at it, silence annoying directory change messages. Signed-off-by: Namhyung Kim <namhyung.kim@lge.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1337677434-4881-2-git-send-email-namhyung.kim@lge.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Namhyung Kim authored
Change some variable names according to new library name. Signed-off-by: Namhyung Kim <namhyung.kim@lge.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1337677434-4881-1-git-send-email-namhyung.kim@lge.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Frederic Weisbecker authored
While migrating to the libtraceevent, the perl scripting engine missed this structure rename. This fixes: util/scripting-engines/trace-event-perl.c: In function "find_cache_event": util/scripting-engines/trace-event-perl.c:244: error: assignment from incompatible pointer type util/scripting-engines/trace-event-perl.c:248: error: dereferencing pointer to incomplete type util/scripting-engines/trace-event-perl.c:248: error: dereferencing pointer to incomplete type util/scripting-engines/trace-event-perl.c:250: error: dereferencing pointer to incomplete type util/scripting-engines/trace-event-perl.c: In function "perl_process_tracepoint": util/scripting-engines/trace-event-perl.c:286: error: dereferencing pointer to incomplete type util/scripting-engines/trace-event-perl.c:286: error: dereferencing pointer to incomplete type util/scripting-engines/trace-event-perl.c:307: error: dereferencing pointer to incomplete type util/scripting-engines/trace-event-perl.c: In function "perl_generate_script": util/scripting-engines/trace-event-perl.c:498: error: passing argument 1 of "trace_find_next_event" from incompatible pointer type util/scripting-engines/../trace-event.h:56: note: expected "struct event_format *" but argument is of type "struct event *" util/scripting-engines/trace-event-perl.c:498: error: assignment from incompatible pointer type util/scripting-engines/trace-event-perl.c:499: error: dereferencing pointer to incomplete type util/scripting-engines/trace-event-perl.c:499: error: dereferencing pointer to incomplete type util/scripting-engines/trace-event-perl.c:513: error: dereferencing pointer to incomplete type util/scripting-engines/trace-event-perl.c:532: error: dereferencing pointer to incomplete type util/scripting-engines/trace-event-perl.c:556: error: dereferencing pointer to incomplete type util/scripting-engines/trace-event-perl.c:569: error: dereferencing pointer to incomplete type util/scripting-engines/trace-event-perl.c:570: error: dereferencing pointer to incomplete type util/scripting-engines/trace-event-perl.c:579: error: dereferencing pointer to incomplete type util/scripting-engines/trace-event-perl.c:580: error: dereferencing pointer to incomplete type Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Frederic Weisbecker <fweisbec@redhat.com> Cc: Frederic Weisbecker <fweisbec@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tom Zanussi <tzanussi@gmail.com> Link: http://lkml.kernel.org/r/1337697049-30251-2-git-send-email-fweisbec@gmail.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Frederic Weisbecker authored
Handle the print argument types brought by the new libparsevent in perl scripting engine. PRINT_BSTRING and PRINT_DYNAMIC_ARRAY are treated just like strings and thus don't require specific processing. But PRINT_FUNC need specific plugins which are not yet handled, lets warn if we meet this case. This fixes: util/scripting-engines/trace-event-perl.c: In function define_event_symbol: util/scripting-engines/trace-event-perl.c:188: error: enumeration value PRINT_BSTRING not handled in switch util/scripting-engines/trace-event-perl.c:188: error: enumeration value PRINT_DYNAMIC_ARRAY not handled in switch util/scripting-engines/trace-event-perl.c:188: error: enumeration value PRINT_FUNC not handled in switch Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Frederic Weisbecker <fweisbec@redhat.com> Cc: Frederic Weisbecker <fweisbec@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tom Zanussi <tzanussi@gmail.com> Link: http://lkml.kernel.org/r/1337697049-30251-1-git-send-email-fweisbec@gmail.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Jiri Olsa authored
Adding a new hardcoded term 'name' allowing to specify a name for the pmu event. The term is defined along with standard pmu terms. If no 'name' term is given, the event name follows following template: "raw 0x<perf_event_attr::config>" running: perf stat -e cpu/config=1,name=krava1/u ls will produce following output: ... Performance counter stats for 'ls': 0 krava1 ... running: perf stat -e cpu/config=1/u ls will produce following output: ... Performance counter stats for 'ls': 0 raw 0x1 ... Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1337584373-2741-6-git-send-email-jolsa@redhat.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Jiri Olsa authored
Separating 'mem:' scanner processing, so we can parse out modifier specifically and dont clash with other rules. This is just precaution for the future, so we dont need to worry about the rules clashing where we need to parse out any sub-rule of global rules. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1337584373-2741-5-git-send-email-jolsa@redhat.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Jiri Olsa authored
Switch from using static temporary event list into dynamically allocated one. This way we dont need to pass temp list to the parse_events_parse which makes the interface more clear. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1337584373-2741-4-git-send-email-jolsa@redhat.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Jiri Olsa authored
Adding PARSER_DEBUG Makefile variable to enable building event scanner/ parser with debug enabled. This results in verbose output right out of the scanner/parser. It's useful for debuging the event parser. Keeping this only for event parser so far. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1337584373-2741-3-git-send-email-jolsa@redhat.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Jiri Olsa authored
Moving event parsing specific tests into separated file: util/parse-events-test.c Also changing the code a bit to ease running separate tests. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1337584373-2741-2-git-send-email-jolsa@redhat.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
- 21 May, 2012 3 commits
-
-
git://github.com/fweisbec/tracingIngo Molnar authored
Conflicts: tools/perf/Makefile This tree from Frederic unifies the perf and trace-cmd trace event format parsing code into a single library. Powertop and other tools will also be able to make use of it. Signed-off-by: Ingo Molnar <mingo@kernel.org>
-
Ingo Molnar authored
Merge branch 'tip/perf/core-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace into perf/core
-
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linuxIngo Molnar authored
Fixes for perf/core: - Rename some perf_target methods to avoid double negation, from Namhyung Kim. - Revert change to use per task events with inheritance, from Namhyung Kim. - Events should start disabled till children starts running, from David Ahern. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
-
- 19 May, 2012 3 commits
-
-
Richard Weinberger authored
The BKL is gone, these annotations are useless. Link: http://lkml.kernel.org/r/1320654202-4433-1-git-send-email-richard@nod.atSigned-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
-
Vaibhav Nagarnaik authored
Make sure that the state of buffer_size_kb is initialized correctly and returns actual size of the ring buffer. Link: http://lkml.kernel.org/r/1336066834-1673-1-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Laurent Chavey <chavey@google.com> Cc: Justin Teravest <teravest@google.com> Cc: David Sharp <dhsharp@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
-
Vaibhav Nagarnaik authored
There are 2 separate loops to resize cpu buffers that are online and offline. Merge them to make the code look better. Also change the name from update_completion to update_done to allow shorter lines. Link: http://lkml.kernel.org/r/1337372991-14783-1-git-send-email-vnagarnaik@google.com Cc: Laurent Chavey <chavey@google.com> Cc: Justin Teravest <teravest@google.com> Cc: David Sharp <dhsharp@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
-
- 18 May, 2012 3 commits
-
-
David Ahern authored
764e16a changed perf-record to create events disabled by default and enable them once perf initializations are done. This setting was dropped by 0f82ebc4. Now perf events are once again generated during perf's initialization phase (e.g., generating maps). As an example, perf opens a lot of files at startup. Unpatched: perf record -e syscalls:sys_enter_open -ga -fo /tmp/perf.data -- sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.087 MB /tmp/perf.data (~3798 samples) ] Using perf-script to look at the samples shows the perf command generating 563 of the 566 total events. Patched: perf record -e syscalls:sys_enter_open -ga -fo /tmp/perf.data -- sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.028 MB /tmp/perf.data (~1206 samples) ] Using perf-script to look at the samples does not show perf command. Signed-off-by: David Ahern <dsahern@gmail.com> Link: http://lkml.kernel.org/r/1336968088-11531-1-git-send-email-dsahern@gmail.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Arnaldo Carvalho de Melo authored
Merge reason: We are going to queue up a dependent patch: "perf tools: Move parse event automated tests to separated object" That depends on: commit e7c72d88 perf tools: Add 'G' and 'H' modifiers to event parsing Conflicts: tools/perf/builtin-stat.c Conflicted with the recent 'perf_target' patches when checking the result of perf_evsel open routines to see if a retry is needed to cope with older kernels where the exclude guest/host perf_event_attr bits were not used. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Jiri Olsa authored
Introducing type_val and type_term for term instead of a single type value. Currently the term type marked out the value type as well. With this change we can have future string term values being specified by user and translated into proper number along the processing. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1335371102-11358-2-git-send-email-jolsa@redhat.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
- 17 May, 2012 5 commits
-
-
Jiri Olsa authored
The callchain address is stored as u64. Current code uses following format string to display callchain address: "%p\n", (void *)(long)chain->ip This way we lose upper 32 bits if we report 64 bit addresses in 32 bit environment. Fixing this to always display whole 64 bits. Note, running following to test perf endianity handling: test 1) - origin system: # perf record -a -- sleep 10 (any perf record will do) # perf report > report.origin # perf archive perf.data - copy the perf.data, report.origin and perf.data.tar.bz2 to a target system and run: # tar xjvf perf.data.tar.bz2 -C ~/.debug # perf report > report.target # diff -u report.origin report.target - the diff should produce no output (besides some white space stuff and possibly different date/TZ output) test 2) - origin system: # perf record -ag -fo /tmp/perf.data -- sleep 1 - mount origin system root to the target system on /mnt/origin - target system: # perf script --symfs /mnt/origin -I -i /mnt/origin/tmp/perf.data \ --kallsyms /mnt/origin/proc/kallsyms - complete perf.data header is displayed Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1337151548-2396-8-git-send-email-jolsa@redhat.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Namhyung Kim authored
If perf doesn't mmap on event (like perf stat), it should not create per-task-per-cpu events. So just use a dummy cpu map to create a per-task event for this case. Signed-off-by: Namhyung Kim <namhyung.kim@lge.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1337161549-9870-3-git-send-email-namhyung.kim@lge.com [ committer note: renamed .need_mmap to .uses_mmap ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Steven Rostedt authored
The function tracer will enable the -pg option with gcc, which requires that frame pointers. When FRAME_POINTER is defined in the kernel config it adds the gcc option -fno-omit-frame-pointer which causes some problems on some architectures. For those architectures, the FRAME_POINTER select was not set. When FUNCTION_TRACER was selected on these architectures that can not have -fno-omit-frame-pointer, the -pg option is still set. But when FRAME_POINTER is not selected, the kernel config would add the gcc option -fomit-frame-pointer. Adding this option is incompatible with -pg even on archs that do not need frame pointers with -pg. The answer to this was to just not add either -fno-omit-frame-pointer or -fomit-frame-pointer on these archs that want function tracing but do not set FRAME_POINTER. As it turns out, for archs that require frame pointers for function tracing, the same can be used. If gcc requires frame pointers with -pg, it will simply add it. The best thing to do is not select FRAME_POINTER when function tracing is selected, and let gcc add it if needed. Only add the -fno-omit-frame-pointer when something else selects FRAME_POINTER, but do not add -fomit-frame-pointer if function tracing is selected. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
-
Steven Rostedt authored
To remove duplicate code, have the ftrace arch_ftrace_update_code() use the generic ftrace_modify_all_code(). This requires that the default ftrace_replace_code() becomes a weak function so that an arch may override it. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
-
Steven Rostedt authored
Rename __ftrace_modify_code() to ftrace_modify_all_code() and make it global for all archs to use. This will remove the duplication of code, as archs that can modify code without stop_machine() can use it directly outside of the stop_machine() call. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
-
- 16 May, 2012 7 commits
-
-
Steven Rostedt authored
ftrace_location() is passed an addr, and returns 1 if the addr is on a ftrace nop (or caller to ftrace_caller), and 0 otherwise. To let kprobes know if it should move a breakpoint or not, it must return the actual addr that is the start of the ftrace nop. This way a kprobe placed on the location of a ftrace nop, can instead be placed on the instruction after the nop. Even if the probe addr is on the second or later byte of the nop, it can simply be moved forward. Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
-
Steven Rostedt authored
Both ftrace_location() and ftrace_text_reserved() do basically the same thing. They search to see if an address is in the ftace table (contains an address that may change from nop to call ftrace_caller). The difference is that ftrace_location() searches a single address, but ftrace_text_reserved() searches a range. This also makes the ftrace_text_reserved() faster as it now uses a bsearch() instead of linearly searching all the addresses within a page. Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
-
Steven Rostedt authored
As all records in a page of the ftrace table are sorted, we can speed up the search algorithm by checking if the address to look for falls in between the first and last record ip on the page. This speeds up both the ftrace_location() and ftrace_text_reserved() algorithms, as it can skip full pages when the search address is not in them. Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
-
Steven Rostedt authored
The ftrace_record_ip() and ftrace_alloc_dyn_node() were from the time of the ftrace daemon. Although they were still used, they still make things a bit more complex than necessary. Move the code into the one function that uses it, and remove the helper functions. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
-
Steven Rostedt authored
Instead of just sorting the ip's of the functions per ftrace page, sort the entire list before adding them to the ftrace pages. This will allow the bsearch algorithm to be sped up as it can also sort by pages, not just records within a page. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
-
Vaibhav Nagarnaik authored
According to Documentation/trace/ftrace.txt: tracing_cpumask: This is a mask that lets the user only trace on specified CPUS. The format is a hex string representing the CPUS. The tracing_cpumask currently doesn't affect the tracing state of per-CPU ring buffers. This patch enables/disables CPU recording as its corresponding bit in tracing_cpumask is set/unset. Link: http://lkml.kernel.org/r/1336096792-25373-3-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Laurent Chavey <chavey@google.com> Cc: Justin Teravest <teravest@google.com> Cc: David Sharp <dhsharp@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
-
Namhyung Kim authored
If tracing_dentry_percpu() failed, tracing_init_debugfs_percpu() will try to create each cpu directories on debugfs' root directory as d_percpu is NULL. Link: http://lkml.kernel.org/r/1335143517-2285-1-git-send-email-namhyung.kim@lge.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Signed-off-by: Namhyung Kim <namhyung.kim@lge.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
-