- 28 Apr, 2017 12 commits
-
-
Tobin C. Harding authored
Checkpatch emits CHECK: Please don't use multiple blank lines. Remove multiple blank lines. Signed-off-by:
Tobin C. Harding <me@tobin.cc> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tobin C. Harding authored
Driver uses preprocessor directives to define SLP_ASLEEP and SLP_ACTIVE. These can be defined using an enumeration type. Doing so adds to the readability and gives the usual compiler benefits of having an enum. Functions that currently accept integer types can now use the new enumeration type, further aiding readability. Add enumeration type sleep_mode_type. Update code that handles sleep mode to use the new enumeration type. Signed-off-by:
-
Tobin C. Harding authored
Host interface connection status is handled using a 32 bit type. Top byte is used as for FORCE_DISCONNECT status, low bits are used for connect/disconnect status. Driver masks and checks integers to ascertain status. If functions are defined to do the masking and equality check then the details of how the status integer is used are abstracted away. This makes the code easier to read. Also future updates to the status handling will be easier because the code is in one place. Driver currently uses the CONNECT_STATUS and DISCONNECT_STATUS as values, as apposed to opaque values. Because of this driver code checks for equality with CONNECT_STATUS and DISCONNECT_STATUS as apposed to negating a single check (ie 'foo != CONNECT_STATUS). In order to maintain the current functionality we define two separate functions is_connect_status() and is_disconnect_status(). Add functions to abstract the status integer check. Update all sites that do the check manually to use the newly defined functions. Signed-off-by:
-
Tobin C. Harding authored
Driver contains duplicate code. Host interface has numerous request functions which allocate memory for a request header. Each request header is different but all contain, as the first member, a hostif_hdr structure. This structure has size and event members which need to be set. By defining a helper function to allocate the memory and set the initial hostif_hdr members code duplication is reduced. Add function to allocate memory for a host interface request. Set 'size' and 'event' members. Remove duplicate code using newly defined function. Signed-off-by:
-
Tobin C. Harding authored
Memory allocation code contains unneeded debug statements, failed kmalloc() calls typically do not require a debug message. Introduction of a local 'size' variable allows kmalloc() call to be marginally cleaner, still uses magic numbers but these require a more substantial fix. Moving the magic numbers onto a single line opens the way for further refactoring. Clean memory allocation code, remove debug statements. Signed-off-by:
-
Tobin C. Harding authored
Current switch statement has duplicate code in branches. This code can be put after the switch statement so as to remove the duplication. Move code to after switch statement, remove duplicate code. Make error branch return so as not to execute the moved code block. Do not change the program logic. Signed-off-by:
-
Tobin C. Harding authored
Driver includes magic numbers. Defining constants or using existing constants aids the readability of the code. Magic number '12' is used for two ethernet addresses (6 bytes each). ETH_ALEN is already defined within the kernel to 6. We can us the expression '2 * ETH_ALEN' to make this code explicit. Magic number '20' refers to the data size, in bytes, of a struct ether_hdr (described in eap_packet.h). We can define a constant for this purpose, making the code explicit and easier to read. Define constant. Remove magic numbers, using newly defined constant and/or expression using existing kernel constant. Signed-off-by:
-
Tobin C. Harding authored
Currently, after allocating an sk_buff, driver fills the sk_buff within code block guarded by a NULL check on the sk_buff. If a NULL check is done immediately after the allocation, and code returns on error, then the subsequent code need not be guarded and the level of indentation may be reduced. This aids the readability of the code and makes explicit the error path. Check for NULL directly after allocating the sk_buff, return if allocation fails. Reduce indentation of subsequent code. Do not change the program logic. Signed-off-by:
-
Tobin C. Harding authored
Code declares and assigns to a local variable that is never used, it can be safely removed. Remove unused local variable. Signed-off-by:
-
Tobin C. Harding authored
Currently source and destination ethernet addresses are checked twice, once in hostif_data_indication() and then again in hostif_data_indication_wpa(). The second of these functions is called from the first right after the address check is done. This check is a duplicate and is unnecessary. Remove unnecessary duplicate address check. Signed-off-by:
-
Valentin Vidic authored
All statements removed from the end of void functions as reported by checkpatch. Signed-off-by:
Valentin Vidic <Valentin.Vidic@CARNet.hr> Signed-off-by:
-
Paolo Cretaro authored
Fix checkpatch.pl warning about unnecessary whitespace before a quoted newline. Signed-off-by:
Paolo Cretaro <melko@frugalware.org> Signed-off-by:
-
- 25 Apr, 2017 5 commits
-
-
Dhananjay Balan authored
Replace hardcoded function name with __func__ Signed-off-by:
Dhananjay Balan <mail@dbalan.in> Signed-off-by:
-
Paolo Cretaro authored
Fix checkpatch ERRORs: code indent should use tabs where possible. Signed-off-by:
-
Okash Khawaja authored
This adds two methods to spk_synth struct: send_xchar and tiocmset, and creates serial implementation for each of them. It takes existing code in apollo, audptr and spkout which already fits the behaviour of send_xchar and tiocmset. In follow-up patches there will be TTY-based implementations of these methods. Then migrating the synths to TTY will include repointing these methods to their TTY implementations Rest of the changes simply make use of serial implementation of these two functions. Signed-off-by:
Okash Khawaja <okash.khawaja@gmail.com> Reviewed-by:
Samuel Thibault <samuel.thibault@ens-lyon.org> Signed-off-by:
-
Pan Bian authored
Function pci_ioremap_bar() will return a NULL pointer if there is no enough memory. However, in function apci3xxx_auto_attach(), the return value of function pci_ioremap_bar() is not validated. This may result in NULL dereference in following access to dev->mmio. This patch fixes the bug. Signed-off-by:
Pan Bian <bianpan2016@163.com> Reviewed-by:
Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
-
Ian Abbott authored
If a process that has mmap'd a COMEDI buffer is being run under a debugger such as GDB, the buffer contents are inaccessible from the debugger. Support the `access()` VM operation to allow the buffer contents to be accessed by another process. Signed-off-by:
-
- 18 Apr, 2017 23 commits
-
-
Laura Abbott authored
Most of the items have been taken care of by a clean up series. Remove the completed items and add a few new ones. Signed-off-by:
Laura Abbott <labbott@redhat.com> Signed-off-by:
-
Laura Abbott authored
This never got set in the ioctl. Properly set a return value of 0 on success. Signed-off-by:
-
Laura Abbott authored
ion_handle was introduced as an abstraction to represent a reference to a buffer via an ion_client. As frameworks outside of Ion evolved, the dmabuf emerged as the preferred standard for use in the kernel. This has made the ion_handle an unnecessary abstraction and prone to race conditions. ion_client is also now only used internally. We have enough mechanisms for race conditions and leaks already so just drop ion_handle and ion_client. This also includes ripping out most of the debugfs infrastructure since much of that was tied to clients and handles. The debugfs infrastructure was prone to give confusing data (orphaned allocations) so it can be replaced with something better if people actually want it. Signed-off-by:
-
Laura Abbott authored
Nobody uses this interface externally. Drop it. Signed-off-by:
-
Laura Abbott authored
The current model of Ion heap registration is based on the outdated model of board files. The replacement for board files (devicetree) isn't a good replacement for what Ion wants to do. In actuality, Ion wants to show what memory is available in the system for something else to figure out what to use. Switch to a model where Ion creates its device unconditionally and heaps are registed as available regions. Currently, only system and CMA heaps are converted over to the new model. Carveout and chunk heaps can be converted over when someone wants to figure out how. Signed-off-by:
-
Laura Abbott authored
Ion current has ion_priv.h and ion.h as header files. ion.h was intended to be used for public APIs but Ion never ended up really having anything public. Combine the two headers so there is only one internal header. Signed-off-by:
-
Laura Abbott authored
Once upon a time, phys_addr_t was not everywhere in the kernel. These days it is used enough places that having a separate Ion type doesn't make sense. Remove the extra type and just use phys_addr_t directly. Signed-off-by:
-
Laura Abbott authored
Several of the Ion ioctls were designed in such a way that they necessitate compat ioctls. We're breaking a bunch of other ABIs and cleaning stuff up anyway so let's follow the ioctl guidelines and clean things up while everyone is busy converting things over anyway. As part of this, also remove the useless alignment field from the allocation structure. Signed-off-by:
-
Laura Abbott authored
Now that we have proper caching, stop setting the DMA address manually. It should be set after properly calling dma_map. Signed-off-by:
-
Laura Abbott authored
When CMA was first introduced, its primary use was for DMA allocation and the only way to get CMA memory was to call dma_alloc_coherent. This put Ion in an awkward position since there was no device structure readily available and setting one up messed up the coherency model. These days, CMA can be allocated directly from the APIs. Switch to using this model to avoid needing a dummy device. This also mitigates some of the caching problems (e.g. dma_alloc_coherent only returning uncached memory). Signed-off-by:
-
Laura Abbott authored
Frameworks (e.g. Ion) may want to iterate over each possible CMA area to allow for enumeration. Introduce a function to allow a callback. Signed-off-by:
-
Laura Abbott authored
Frameworks that may want to enumerate CMA heaps (e.g. Ion) will find it useful to have an explicit name attached to each region. Store the name in each CMA structure. Signed-off-by:
-
Greg Kroah-Hartman authored
Merge tag 'iio-fixes-for-4.11e' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: Fifth set of IIO fixes for the 4.11 cycle. As these are rather late in the cycle, they may sneak over into 4.12. There is a fix for a regression caused by another fix (hid sensors hardware seems to vary a lot in how various corner cases are handled). * ad7303 - fix channel description. Numeric values were being passed as characters presumably leading to garbage from the userspace interface. * as3935 - the write data macro was wrong so fix it. * bmp280 - incorrect handling of negative values as being unsigned broke humidity calculation. * hid-sensor - Restore the poll and hysteresis values after resume as some hardware doesn't do it. * stm32-trigger - buglet in reading the sampling frequency
-
Greg Kroah-Hartman authored
Merge tag 'iio-for-4.12d' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: Fourth set of IIO new device support, features and cleanups for the 4.12 cycle New device support * max1117, 1118 and 1119 - new ADC driver * max9611 - new ADC driver * pm8xxx hk/xoadc - new driver with some shared features broken out from the SPMI vadc. * sun4i-gpadc - A33 thermal sensor support (with associated rework) * stm32-dac - new driver and bindings * stm32 trigger - enable support of quadrature encoder device and counter modes Features * apds9960 - use the runtime pm for normal suspend * stm32-adc - add opition to sest resolution via devicetree * xoadc - augment DT bindings to deal with some weird mux cases Cleanups * ad5933 - protect direct mode using claim and release helpers * ade7759 - S_IRUGO and friends to octal in two goes * adis16203 - drop unnecessary brackets * hid-sensor - fix unbalanced pm_runtieme_enable error when probing after remove * lsm6dsx - use actual part numbers for device name when known - simplify data read pin parsing * mpu3050 - avoid double reporting errors
-
Martin Karamihov authored
This patch fixes the following sparse warning: ieee80211_tx.c:174:36: incorrect type in assignment (different base types) ieee80211_tx.c:174:36: expected unsigned short [unsigned] [short] [usertype] <noident> ieee80211_tx.c:174:36: got restricted __be16 [usertype] <noident> by adding left side cast to __be16. Signed-off-by:
Martin Karamihov <martinowar@gmail.com> Signed-off-by:
-
Aishwarya Pant authored
Changed the type of wpa_ie_len from (int *) to (unsigned int *) in the function rtw_get_wpa_ie(..) to suppress signedness mismatch warnings in rtw_generate_ie of the type- drivers/staging/rtl8188eu//core/rtw_ieee80211.c:1009:60: warning: incorrect type in argument 2 (different signedness) drivers/staging/rtl8188eu//core/rtw_ieee80211.c:1009:60: expected int *wpa_ie_len drivers/staging/rtl8188eu//core/rtw_ieee80211.c:1009:60: got unsigned int *<noident> Signed-off-by:
Aishwarya Pant <aishpant@gmail.com> Signed-off-by:
-
Aishwarya Pant authored
Changed the type of sz from (int) to (unsigned int) to suppress signedness mismatch warnings of the type- drivers/staging/rtl8188eu//core/rtw_ieee80211.c:258:97: warning: incorrect type in argument 5 (different signedness) drivers/staging/rtl8188eu//core/rtw_ieee80211.c:258:97: expected unsigned int [usertype] *frlen drivers/staging/rtl8188eu//core/rtw_ieee80211.c:258:97: got int *<noident> Signed-off-by:
-
Aishwarya Pant authored
Changed the type of len from (int *) to (unsigned int *) in the function rtw_get_ie(..) and wherever this function is called to suppress signedness mismatch warnings of the type- drivers/staging/rtl8188eu//core/rtw_ap.c:78:60: warning: incorrect type in argument 3 (different signedness) drivers/staging/rtl8188eu//core/rtw_ap.c:78:60: expected int *len drivers/staging/rtl8188eu//core/rtw_ap.c:78:60: got unsigned int *<noident> Signed-off-by:
-
Colin Ian King authored
The two different paths for an if statement are identical and hence we can just replace it with the single statement. Detected by CoverityScan, CID#1428443 ("Identical code for different branches") Signed-off-by:Colin Ian King <colin.king@canonical.com> Reviewed-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Colin Ian King authored
The comparison of mode >= 0 is redundant as mode is a u32 and this is always true. Remove this redundant code. Detected with CoverityScan ("Unsigned compared against 0") Signed-off-by: -
Kevin Wern authored
Gstreamer's v4l2src reacted poorly to certain outputs from the bcm2835 video driver's ioctl ops function vidioc_enum_framesizes, so a workaround was created that could be activated by user input. This workaround would replace the driver's ioctl ops struct with another, similar struct--only with no function pointed to by vidioc_enum_framesizes. With no response, gstreamer would attempt to continue with some default settings that happened to work better. However, this bug has been fixed in gstreamer since 2014, so we shouldn't include this workaround in the stable version of the driver. Signed-off-by:
Kevin Wern <kevin.m.wern@gmail.com> Signed-off-by:
-
Tobin C. Harding authored
Checkpatch emits WARNING: quoted string split across lines. Concatenate string onto single line. Signed-off-by:
-
Tobin C. Harding authored
Driver SDIO code uses helper functions to do IO to the SDIO device. Current helpers handle IO of a single byte as well as multi-byte. Driver predominately uses single byte IO. If the common case is made simple it simplifies the whole driver. The common case can be made simple by splitting the multi-byte and single byte calls into separate functions, i.e 4 functions in total, read single byte, read multi-byte, write single byte, write multi-byte. Also, we need to handle the debug code. Currently debug calls after read/write fail access the IO buffer. This buffer, at best, does not hold useful data on the error path, at worst is uninitialized and holds garbage. Split read/write helper functions into two functions each, one for single byte IO and one for multi-byte IO. Fix all call sites. Do not change the program logic. Signed-off-by:
-
