- 05 May, 2017 3 commits
-
-
Lucas Stach authored
Update the common hardware header with new information from rnndb. Signed-off-by:Lucas Stach <l.stach@pengutronix.de>
-
Eric Anholt authored
Without this, polling on the dma-buf (and presumably other devices synchronizing against our rendering) would return immediately, even while the BO was busy. Signed-off-by:
Eric Anholt <eric@anholt.net> Cc: stable@vger.kernel.org Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Russell King <linux+etnaviv@armlinux.org.uk> Cc: Christian Gmeiner <christian.gmeiner@gmail.com> Cc: etnaviv@lists.freedesktop.org Signed-off-by:
-
Lucas Stach authored
If we bail out of the submit before actually adding the cmdstream to the kernel ring there is no valid fence to put. Make sure to skip the fence_put in that case. Signed-off-by:
-
- 01 May, 2017 1 commit
-
-
git://github.com/skeggsb/linuxDave Airlie authored
Some nouveau regression fixes. * 'linux-4.12' of git://github.com/skeggsb/linux: drm/nouveau/fb/gf100-: Fix 32 bit wraparound in new ram detection drm/nouveau/secboot/gm20b: fix the error return code in gm20b_secboot_tegra_read_wpr() drm/nouveau/kms: Increase max retries in scanout position queries. drm/nouveau/bios/bitP: check that table is long enough for optional pointers drm/nouveau/fifo/nv40: no ctxsw for pre-nv44 mpeg engine
-
- 29 Apr, 2017 5 commits
-
-
Mario Kleiner authored
A missing u64 cast causes a 32-Bit wraparound from 4096 MiB to 0 MiB and therefore total 0 MiB VRAM detected if card has 4096 Mib per FBP. Signed-off-by:
Mario Kleiner <mario.kleiner.de@gmail.com> Reviewed-by:
Karol Herbst <karolherbst@gmail.com> Signed-off-by:
Ben Skeggs <bskeggs@redhat.com>
-
Wei Yongjun authored
The error return code PTR_ERR(mc) is always 0 since mc is equal to 0 in this error handling case. Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by:
-
Mario Kleiner authored
So far we only allowed for 1 retry and just failed the query - and thereby high precision vblank timestamping - if we did not get a reasonable result, as such a failure wasn't considered all too horrible. There are a few NVidia gpu models out there which may need a bit more than 1 retry to get a successful query result under some conditions. Since Linux 4.4 the update code for vblank counter and timestamp in drm_update_vblank_count() changed so that the implementation assumes that high precision vblank timestamping of a kms driver either consistently succeeds or consistently fails for a given video mode and encoder/connector combo. Iow. switching from success to fail or vice versa on a modeset or connector change is ok, but spurious temporary failure for a given setup can confuse the core code and potentially cause bad miscounting of vblanks and confusion or hangs in userspace clients which rely on vblank stuff, e.g., desktop compositors. Therefore change the max retry count to a larger number - more than any gpu so far is known to need to succeed, but still low enough so that these queries which do also happen in vblank interrupt are still fast enough to be not disastrously long if something would go badly wrong with them. As such sporadic retries only happen seldom even on affected gpu's, this could mean a vblank irq could take a few dozen microseconds longer every few hours of uptime -- better than a desktop compositor randomly hanging every couple of hours or days of uptime in a hard to reproduce manner. Signed-off-by:
-
Ben Skeggs authored
Fixes OOB VBIOS accesses on some boards. Signed-off-by: -
Ilia Mirkin authored
Signed-off-by:Ilia Mirkin <imirkin@alum.mit.edu>
-
- 28 Apr, 2017 3 commits
-
-
Dave Airlie authored
Merge tag 'drm-intel-next-fixes-2017-04-27' of git://anongit.freedesktop.org/git/drm-intel into drm-next drm/i915 and gvt fixes for drm-next/v4.12 * tag 'drm-intel-next-fixes-2017-04-27' of git://anongit.freedesktop.org/git/drm-intel: drm/i915: Confirm the request is still active before adding it to the await drm/i915: Avoid busy-spinning on VLV_GLTC_PW_STATUS mmio drm/i915/selftests: Allocate inode/file dynamically drm/i915: Fix system hang with EI UP masked on Haswell drm/i915: checking for NULL instead of IS_ERR() in mock selftests drm/i915: Perform link quality check unconditionally during long pulse drm/i915: Fix use after free in lpe_audio_platdev_destroy() drm/i915: Use the right mapping_gfp_mask for final shmem allocation drm/i915: Make legacy cursor updates more unsynced drm/i915: Apply a cond_resched() to the saturated signaler drm/i915: Park the signaler before sleeping drm/i915/gvt: fix a bounds check in ring_id_to_context_switch_event() drm/i915/gvt: Fix PTE write flush for taking runtime pm properly drm/i915/gvt: remove some debug messages in scheduler timer handler drm/i915/gvt: add mmio init for virtual display drm/i915/gvt: use directly assignment for structure copying drm/i915/gvt: remove redundant ring id check which cause significant CPU misprediction drm/i915/gvt: remove redundant platform check for mocs load/restore drm/i915/gvt: Align render mmio list to cacheline drm/i915/gvt: cleanup some too chatty scheduler message
-
git://people.freedesktop.org/~syeh/repos_linuxDave Airlie authored
trivial patch. * 'drm-vmwgfx-next' of git://people.freedesktop.org/~syeh/repos_linux: drm/vmwgfx: Convert macro to octal representation
-
git://linux-arm.org/linux-ldDave Airlie authored
Latest updates on Mali DP, adding support for colour management, plane scaling and power management. (these have been in -next for a while). * 'for-upstream/mali-dp' of git://linux-arm.org/linux-ld: drm: mali-dp: use div_u64 for expensive 64-bit divisions drm: mali-dp: Check the mclk rate and allow up/down scaling drm: mali-dp: Enable image enhancement when scaling drm: mali-dp: Add plane upscaling support drm/mali-dp: Add core_id file to the sysfs interface drm: mali-dp: Add CTM support drm: mali-dp: enable gamma support drm: mali-dp: add malidp_crtc_state struct drm: mali-dp: add custom reset hook for planes drm: mali-dp: remove unused variable drm: mali-dp: add atomic_print_state for planes drm: mali-dp: Enable power management for the device. drm: mali-dp: Update the state of all planes before re-enabling active CRTCs.
-
- 26 Apr, 2017 13 commits
-
-
Arnd Bergmann authored
On 32-bit machines, we can't divide 64-bit integers: drivers/gpu/drm/arm/malidp_crtc.o: In function `malidp_crtc_atomic_check': malidp_crtc.c:(.text.malidp_crtc_atomic_check+0x3c0): undefined reference to `__aeabi_uldivmod' malidp_crtc.c:(.text.malidp_crtc_atomic_check+0x3dc): undefined reference to `__aeabi_uldivmod' This calls the div_u64 function explicitly instead. Fixes: 4cea4e9f6690 ("drm: mali-dp: Add plane upscaling support") Signed-off-by:Arnd Bergmann <arnd@arndb.de>
-
Chris Wilson authored
Although we do check the completion-status of the request before actually adding a wait on it (either to its submit fence or its completion dma-fence), we currently do not check before adding it to the dependency lists. In fact, without checking for a completed request we may try to use the signaler after it has been retired and its dependency tree freed: [ 60.044057] BUG: KASAN: use-after-free in __list_add_valid+0x1d/0xd0 at addr ffff880348c9e6a0 [ 60.044118] Read of size 8 by task gem_exec_fence/530 [ 60.044164] CPU: 1 PID: 530 Comm: gem_exec_fence Tainted: G E 4.11.0-rc7+ #46 [ 60.044226] Hardware name: ��������������������������������� ���������������������������������/���������������������������������, BIOS RYBDWi35.86A.0246.2 [ 60.044290] Call Trace: [ 60.044337] dump_stack+0x4d/0x6a [ 60.044383] kasan_object_err+0x21/0x70 [ 60.044435] kasan_report+0x225/0x4e0 [ 60.044488] ? __list_add_valid+0x1d/0xd0 [ 60.044534] ? kasan_kmalloc+0xad/0xe0 [ 60.044587] __asan_load8+0x5e/0x70 [ 60.044639] __list_add_valid+0x1d/0xd0 [ 60.044788] __i915_priotree_add_dependency+0x67/0x130 [i915] [ 60.044895] i915_gem_request_await_request+0xa8/0x370 [i915] [ 60.044974] i915_gem_request_await_dma_fence+0x129/0x140 [i915] [ 60.045049] i915_gem_do_execbuffer.isra.37+0xb0a/0x26b0 [i915] [ 60.045077] ? save_stack+0xb1/0xd0 [ 60.045105] ? save_stack_trace+0x1b/0x20 [ 60.045132] ? save_stack+0x46/0xd0 [ 60.045158] ? kasan_kmalloc+0xad/0xe0 [ 60.045184] ? __kmalloc+0xd8/0x670 [ 60.045229] ? drm_ioctl+0x359/0x640 [drm] [ 60.045256] ? SyS_ioctl+0x41/0x70 [ 60.045330] ? i915_vma_move_to_active+0x540/0x540 [i915] [ 60.045360] ? tty_insert_flip_string_flags+0xa1/0xf0 [ 60.045387] ? tty_flip_buffer_push+0x63/0x70 [ 60.045414] ? remove_wait_queue+0xa9/0xc0 [ 60.045441] ? kasan_unpoison_shadow+0x35/0x50 [ 60.045467] ? kasan_kmalloc+0xad/0xe0 [ 60.045494] ? kasan_check_write+0x14/0x20 [ 60.045568] i915_gem_execbuffer2+0xdb/0x2a0 [i915] [ 60.045616] drm_ioctl+0x359/0x640 [drm] [ 60.045705] ? i915_gem_execbuffer+0x5a0/0x5a0 [i915] [ 60.045751] ? drm_version+0x150/0x150 [drm] [ 60.045778] ? compat_start_thread+0x60/0x60 [ 60.045805] ? plist_del+0xda/0x1a0 [ 60.045833] do_vfs_ioctl+0x12e/0x910 [ 60.045860] ? ioctl_preallocate+0x130/0x130 [ 60.045886] ? pci_mmcfg_check_reserved+0xc0/0xc0 [ 60.045913] ? vfs_write+0x196/0x240 [ 60.045939] ? __fget_light+0xa7/0xc0 [ 60.045965] SyS_ioctl+0x41/0x70 [ 60.045991] entry_SYSCALL_64_fastpath+0x17/0x98 [ 60.046017] RIP: 0033:0x7feb2baefc47 [ 60.046042] RSP: 002b:00007fff56d28e58 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [ 60.046075] RAX: ffffffffffffffda RBX: 00007fff56d290a8 RCX: 00007feb2baefc47 [ 60.046102] RDX: 00007fff56d29050 RSI: 00000000c0406469 RDI: 0000000000000003 [ 60.046129] RBP: 00007fff56d29050 R08: 000055ecc4cd27d0 R09: 00007feb2bda8600 [ 60.046154] R10: 0000000000000073 R11: 0000000000000246 R12: 00000000c0406469 [ 60.046177] R13: 0000000000000003 R14: 000000000000000f R15: 0000000000000099 [ 60.046203] Object at ffff880348c9e680, in cache i915_dependency size: 64 [ 60.046225] Allocated: [ 60.046246] PID = 530 [ 60.046269] save_stack_trace+0x1b/0x20 [ 60.046292] save_stack+0x46/0xd0 [ 60.046318] kasan_kmalloc+0xad/0xe0 [ 60.046343] kasan_slab_alloc+0x12/0x20 [ 60.046368] kmem_cache_alloc+0xab/0x650 [ 60.046445] i915_gem_request_await_request+0x88/0x370 [i915] [ 60.046559] i915_gem_request_await_dma_fence+0x129/0x140 [i915] [ 60.046705] i915_gem_do_execbuffer.isra.37+0xb0a/0x26b0 [i915] [ 60.046849] i915_gem_execbuffer2+0xdb/0x2a0 [i915] [ 60.046936] drm_ioctl+0x359/0x640 [drm] [ 60.046987] do_vfs_ioctl+0x12e/0x910 [ 60.047038] SyS_ioctl+0x41/0x70 [ 60.047090] entry_SYSCALL_64_fastpath+0x17/0x98 [ 60.047139] Freed: [ 60.047179] PID = 530 [ 60.047223] save_stack_trace+0x1b/0x20 [ 60.047269] save_stack+0x46/0xd0 [ 60.047317] kasan_slab_free+0x72/0xc0 [ 60.047366] kmem_cache_free+0x39/0x160 [ 60.047512] i915_gem_request_retire+0x83f/0x930 [i915] [ 60.047657] i915_gem_request_alloc+0x166/0x600 [i915] [ 60.047799] i915_gem_do_execbuffer.isra.37+0xad8/0x26b0 [i915] [ 60.047897] i915_gem_execbuffer2+0xdb/0x2a0 [i915] [ 60.047942] drm_ioctl+0x359/0x640 [drm] [ 60.047968] do_vfs_ioctl+0x12e/0x910 [ 60.047993] SyS_ioctl+0x41/0x70 [ 60.048019] entry_SYSCALL_64_fastpath+0x17/0x98 [ 60.048044] Memory state around the buggy address: [ 60.048066] ffff880348c9e580: 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc [ 60.048105] ffff880348c9e600: 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc [ 60.048138] >ffff880348c9e680: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc [ 60.048170] ^ [ 60.048191] ffff880348c9e700: 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc [ 60.048225] ffff880348c9e780: 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc Note to hit the use-after-free requires us to be passed back a request via a fence-array, that is from explicit fencing accumulated into a sync-file fence-array. Fixes: 52e54209 ("drm/i915/scheduler: Record all dependencies upon request construction") Testcase: igt/gem_exec_fence/expired-history Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
Michał Winiarski <michal.winiarski@intel.com> Reviewed-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170422081537.6468-1-chris@chris-wilson.co.uk (cherry picked from commit ade0b0c9) Signed-off-by:
Jani Nikula <jani.nikula@intel.com>
-
Chris Wilson authored
The busy-spin, as the first stage of intel_wait_for_register(), is currently under suspicion for causing: [ 62.034926] NMI watchdog: Watchdog detected hard LOCKUP on cpu 1 [ 62.034928] Modules linked in: i2c_dev i915 intel_gtt drm_kms_helper prime_numbers [ 62.034932] CPU: 1 PID: 183 Comm: kworker/1:2 Not tainted 4.11.0-rc7+ #471 [ 62.034933] Hardware name: / , BIOS PYBSWCEL.86A.0027.2015.0507.1758 05/07/2015 [ 62.034934] Workqueue: pm pm_runtime_work [ 62.034936] task: ffff880275a04ec0 task.stack: ffffc900002d8000 [ 62.034936] RIP: 0010:__intel_wait_for_register_fw+0x77/0x1a0 [i915] [ 62.034937] RSP: 0018:ffffc900002dbc38 EFLAGS: 00000082 [ 62.034939] RAX: ffffc90003530094 RBX: 0000000000130094 RCX: 0000000000000001 [ 62.034940] RDX: 00000000000000a1 RSI: ffff88027fd15e58 RDI: 0000000000000000 [ 62.034941] RBP: ffffc900002dbc78 R08: 0000000000000002 R09: 0000000000000000 [ 62.034942] R10: ffffc900002dbc18 R11: ffff880276429dd0 R12: ffff8802707c0000 [ 62.034943] R13: 00000000000000a0 R14: 0000000000000000 R15: 00000000fffefc10 [ 62.034945] FS: 0000000000000000(0000) GS:ffff88027fd00000(0000) knlGS:0000000000000000 [ 62.034945] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 62.034947] CR2: 00007ffd3cd98ff8 CR3: 0000000274c19000 CR4: 00000000001006e0 [ 62.034947] Call Trace: [ 62.034948] intel_wait_for_register+0x77/0x140 [i915] [ 62.034949] vlv_suspend_complete+0x23/0x5b0 [i915] [ 62.034950] intel_runtime_suspend+0x16c/0x2a0 [i915] [ 62.034950] pci_pm_runtime_suspend+0x50/0x180 [ 62.034951] ? pci_pm_runtime_resume+0xa0/0xa0 [ 62.034952] __rpm_callback+0xc5/0x210 [ 62.034953] rpm_callback+0x1f/0x80 [ 62.034953] ? pci_pm_runtime_resume+0xa0/0xa0 [ 62.034954] rpm_suspend+0x118/0x580 [ 62.034955] pm_runtime_work+0x64/0x90 [ 62.034956] process_one_work+0x1bb/0x3e0 [ 62.034956] worker_thread+0x46/0x4f0 [ 62.034957] ? __schedule+0x18b/0x610 [ 62.034958] kthread+0xff/0x140 [ 62.034958] ? process_one_work+0x3e0/0x3e0 [ 62.034959] ? kthread_create_on_node+ and related hard lockups in CI for byt and bsw. Note this effectively reverts commits 41ce405e and b2736695 ("drm/i915: Convert wait_for(I915_READ(reg)) to intel_wait_for_register()") v2: Convert bool allow into a u32 mask for clarity and repeat the comment on vlv rc6 timing to justify the 3ms timeout used for the wait (Ville) Fixes: 41ce405e ("drm/i915: Convert wait_for(I915_READ(reg)) to intel_wait_for_register()") Fixes: b2736695 ("drm/i915: Convert wait_for(I915_READ(reg)) to intel_wait_for_register()") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100718Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170421135815.11897-1-chris@chris-wilson.co.ukTested-by:
Tomi Sarvela <tomi.p.sarvela@intel.com> (cherry picked from commit 3dd14c04) Signed-off-by:
-
Chris Wilson authored
Avoid having too large a stack by creating the fake struct inode/file on the heap instead. drivers/gpu/drm/i915/selftests/mock_drm.c: In function 'mock_file': drivers/gpu/drm/i915/selftests/mock_drm.c:46:1: error: the frame size of 1328 bytes is larger than 1280 bytes [-Werror=frame-larger-than=] drivers/gpu/drm/i915/selftests/mock_drm.c: In function 'mock_file_free': drivers/gpu/drm/i915/selftests/mock_drm.c:54:1: error: the frame size of 1312 bytes is larger than 1280 bytes [-Werror=frame-larger-than=] Reported-by:
-
Mika Kuoppala authored
Previously with commit a9c1f90c ("drm/i915: Don't mask EI UP interrupt on IVB|SNB") certain, seemingly unrelated bit (GEN6_PM_RP_UP_EI_EXPIRED) was needed to be unmasked for IVB and SNB in order to prevent system hang with chained batchbuffers. Our CI was seeing incomplete results with tests that used chained batches and it was found out that HSW needs to have this same bit unmasked to reliably survive chained batches. Always unmask GEN6_PM_RP_UP_EI_EXPIRED on Haswell to prevent system hang with batch chaining. Testcase: igt/gem_exec_fence/nb-await-default Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100672 Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@vger.kernel.org Signed-off-by:
Mika Kuoppala <mika.kuoppala@intel.com> Acked-by:
-
Dan Carpenter authored
i915_gem_request_alloc() uses error pointers. It never returns NULLs. Fixes: 0daf0113 ("drm/i915: Mock infrastructure for request emission") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170413195217.GA26108@mwandaReviewed-by:
-
Ville Syrjälä authored
Apparently some DP sinks are a little nuts and cause HPD to drop intermittently during modesets. This happens eg. on an ASUS PB287Q. In oder to recover from this we can't really use the previous connector status to determine if the link needs retraining, so let's just ignore that piece of information and do the retrain unconditionally. We do of course still check whether the link is supposed to be running or not. To actually get read out the EDID and update things properly we also need to nuke the goto out added by commit 7d23e3c3 ("drm/i915: Cleaning up intel_dp_hpd_pulse"). I'm actually not sure why that was there. Perhaps to avoid an EDID read if the connector status didn't appear to change, but that sort of thing is quite racy and would have failed anyway if we failed to keep up with the hotplugs (if we missed the HPD down in between two HPD ups). And now that we take this codepath unconditionally we definitely need to drop the goto as otherwise we would never do the EDID read. v2: Drop the goto that made us skip EDID reads entirely. Doh! v3: Rebase due to locking changes s/apparely/apparently/ in the comment (Chris) Cc: stable@vger.kernel.org Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Reported-by:
Palmer Dabbelt <palmer@dabbelt.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99766 References: https://lists.freedesktop.org/archives/intel-gfx/2017-February/119779.htmlSigned-off-by:
-
Chris Wilson authored
[31908.547136] BUG: KASAN: use-after-free in intel_lpe_audio_teardown+0x78/0xb0 [i915] at addr ffff8801f7788358 [31908.547297] Read of size 8 by task drv_selftest/3781 [31908.547405] CPU: 0 PID: 3781 Comm: drv_selftest Tainted: G BU W 4.10.0+ #451 [31908.547553] Hardware name: / , BIOS PYBSWCEL.86A.0027.2015.0507.1758 05/07/2015 [31908.547682] Call Trace: [31908.547772] dump_stack+0x68/0x9f [31908.547857] kasan_object_err+0x1c/0x70 [31908.547947] kasan_report_error+0x1f1/0x4f0 [31908.548038] ? kfree+0xaa/0x170 [31908.548121] kasan_report+0x34/0x40 [31908.548211] ? klist_children_get+0x20/0x30 [31908.548472] ? intel_lpe_audio_teardown+0x78/0xb0 [i915] [31908.548567] __asan_load8+0x5e/0x70 [31908.548824] intel_lpe_audio_teardown+0x78/0xb0 [i915] [31908.549080] intel_audio_deinit+0x28/0x80 [i915] [31908.549315] i915_driver_unload+0xe4/0x360 [i915] [31908.549551] ? i915_driver_load+0x1d70/0x1d70 [i915] [31908.549651] ? trace_hardirqs_on+0xd/0x10 [31908.549885] i915_pci_remove+0x23/0x30 [i915] [31908.549978] pci_device_remove+0x5c/0x100 [31908.550069] device_release_driver_internal+0x1db/0x2e0 [31908.550165] driver_detach+0x68/0xc0 [31908.550256] bus_remove_driver+0x8b/0x150 [31908.550346] driver_unregister+0x3e/0x60 [31908.550439] pci_unregister_driver+0x1d/0x110 [31908.550531] ? find_module_all+0x7a/0xa0 [31908.550791] i915_exit+0x1a/0x87 [i915] [31908.550881] SyS_delete_module+0x264/0x2c0 [31908.550971] ? free_module+0x430/0x430 [31908.551064] ? trace_hardirqs_off_caller+0x16/0x110 [31908.551159] ? trace_hardirqs_on_caller+0x16/0x280 [31908.551256] ? trace_hardirqs_on_thunk+0x1a/0x1c [31908.551350] entry_SYSCALL_64_fastpath+0x1c/0xb1 [31908.551440] RIP: 0033:0x7f1d67312ec7 [31908.551520] RSP: 002b:00007ffebe34e888 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 [31908.551650] RAX: ffffffffffffffda RBX: ffffffff811123f6 RCX: 00007f1d67312ec7 [31908.551743] RDX: 0000000000000000 RSI: 0000000000000800 RDI: 0000560d0af476b8 [31908.551837] RBP: ffff880233d87f98 R08: 0000000000000000 R09: 00007ffebe34e8b8 [31908.551930] R10: 00007f1d68adf8c0 R11: 0000000000000206 R12: 0000000000000000 [31908.552023] R13: 0000560d0af46440 R14: 0000000000000034 R15: 00007ffebe34d860 [31908.552121] ? trace_hardirqs_off_caller+0x16/0x110 [31908.552217] Object at ffff8801f7788000, in cache kmalloc-2048 size: 2048 [31908.552306] Allocated: [31908.552377] PID = 3781 [31908.552456] save_stack_trace+0x16/0x20 [31908.552539] kasan_kmalloc+0xee/0x190 [31908.552627] __kmalloc+0xdb/0x1b0 [31908.552713] platform_device_alloc+0x27/0x90 [31908.552804] platform_device_register_full+0x36/0x220 [31908.553066] intel_lpe_audio_init+0x41e/0x570 [i915] [31908.553320] intel_audio_init+0xd/0x40 [i915] [31908.553552] i915_driver_load+0x13f5/0x1d70 [i915] [31908.553788] i915_pci_probe+0x65/0xe0 [i915] [31908.553881] pci_device_probe+0xda/0x140 [31908.553969] driver_probe_device+0x400/0x660 [31908.554058] __driver_attach+0x11c/0x120 [31908.554147] bus_for_each_dev+0xe6/0x150 [31908.554237] driver_attach+0x26/0x30 [31908.554325] bus_add_driver+0x26b/0x3b0 [31908.554412] driver_register+0xce/0x190 [31908.554502] __pci_register_driver+0xaf/0xc0 [31908.554589] 0xffffffffa0550063 [31908.554675] do_one_initcall+0x8b/0x1e0 [31908.554764] do_init_module+0x102/0x325 [31908.554852] load_module+0x3aad/0x45e0 [31908.554944] SyS_finit_module+0x169/0x1a0 [31908.555033] entry_SYSCALL_64_fastpath+0x1c/0xb1 [31908.555119] Freed: [31908.555188] PID = 3781 [31908.555266] save_stack_trace+0x16/0x20 [31908.555349] kasan_slab_free+0xb0/0x180 [31908.555436] kfree+0xaa/0x170 [31908.555520] platform_device_release+0x76/0x80 [31908.555610] device_release+0x45/0xe0 [31908.555698] kobject_put+0x11f/0x260 [31908.555785] put_device+0x12/0x20 [31908.555871] platform_device_unregister+0x1b/0x20 [31908.556135] intel_lpe_audio_teardown+0x5c/0xb0 [i915] [31908.556390] intel_audio_deinit+0x28/0x80 [i915] [31908.556622] i915_driver_unload+0xe4/0x360 [i915] [31908.556858] i915_pci_remove+0x23/0x30 [i915] [31908.556948] pci_device_remove+0x5c/0x100 [31908.557037] device_release_driver_internal+0x1db/0x2e0 [31908.557129] driver_detach+0x68/0xc0 [31908.557217] bus_remove_driver+0x8b/0x150 [31908.557304] driver_unregister+0x3e/0x60 [31908.557394] pci_unregister_driver+0x1d/0x110 [31908.557653] i915_exit+0x1a/0x87 [i915] [31908.557741] SyS_delete_module+0x264/0x2c0 [31908.557834] entry_SYSCALL_64_fastpath+0x1c/0xb1 [31908.557919] Memory state around the buggy address: [31908.558005] ffff8801f7788200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [31908.558127] ffff8801f7788280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [31908.558255] >ffff8801f7788300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [31908.558374] ^ [31908.558467] ffff8801f7788380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [31908.558595] ffff8801f7788400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb v2: Just leak the memory (8 bytes) as freeing it ourselves is not safe, and we need to coordinate a proper fix in platform_device itself. Fixes: eef57324 ("drm/i915: setup bridge for HDMI LPE audio driver") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99952Signed-off-by:
Takashi Iwai <tiwai@suse.de> Reviewed-by:
-
Chris Wilson authored
Many sightings report the greater prevalence of allocation failures. This is all due to the incorrect use of mapping_gfp_constraint(), so remove it in favour of just querying the mapping_gfp_mask() which are the exact gfp_t we wanted in the first place. We still do expect a higher chance of reporting ENOMEM, as that is the intention of using __GFP_NORETRY -- to fail rather than oom after having reclaimed from our bo caches, and having done a direct|kswapd reclaim pass. Reported-by:
Jason Ekstrand <jason.ekstrand@intel.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100594 Fixes: 24f8e00a ("drm/i915: Prefer to report ENOMEM rather than incur the oom for gfx allocations") Signed-off-by:
-
Ville Syrjälä authored
We're clearing the legacy_cursor_update flag before calling drm_atomic_helper_setup_commit() which means the helper will wait for the flip to complete before cleaning up the framebuffers. That's not what we want for the legacy cursor, so let's clear the flag after setting up the commit. Also toss in a FIXME about solving these problems in a nicer way using the fabled vblank workers. v2: Also unsync with legacy page flips Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Uwe Kleine-König <uwe@kleine-koenig.org> Cc: Rafael Ristovski <rafael.ristovski@gmail.com> Fixes: a5509abd ("drm/i915: Fix legacy cursor vs. watermarks for ILK-BDW") Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> (cherry picked from commit 89520304) Signed-off-by:
-
Chris Wilson authored
If the engine is continually completing nops, we can saturate the signaler and keep it working indefinitely. This angers the NMI watchdog! A good example is to disable semaphores on snb and run igt/gem_exec_nop - the parallel, multi-engine workloads are more than sufficient to hog the CPU, preventing the system from even processing ICMP echo replies. v2: Tvrtko dug into cond_resched() on x86 and found that it only depended upon preempt_count and not tif_need_resched() - which means that we would always call schedule() at that point. Fixes: c81d4613 ("drm/i915: Convert trace-irq to the breadcrumb waiter") Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> (cherry picked from commit a7980a64) Signed-off-by:
-
Chris Wilson authored
If the signal to park arrives before we sleep, then we need to check kthread_should_park() before sleeping to avoid missing the signal. Otherwise, if the signal arrives whilst we are processing completed requests, we will reset the current->state back to TASK_INTERRUPTIBLE and so miss the wakeup. Fixes: fe3288b5 ("drm/i915: Park the breadcrumbs signaler across a GPU reset") Signed-off-by:
-
https://github.com/01org/gvt-linuxJani Nikula authored
Merge tag 'gvt-next-fixes-2017-04-20' of https://github.com/01org/gvt-linux into drm-intel-next-fixes gvt-next-fixes-2017-04-20 - some code optimization from Changbin - debug message cleanup after QoS merge - misc fixes for display mmio init, reset vgpu warning, etc. Signed-off-by:
-
- 24 Apr, 2017 12 commits
-
-
Mihail Atanassov authored
When downscaling, mclk needs to be sufficiently higher than pxlclk in order to be able to fetch the higher-resolution data and produce output pixels. When not scaling, or when upscaling, mclk can be equal to pxlclk. Since the driver doesn't control mclk, just ensure that the requirement is satisfied with the current clock rate. Signed-off-by:
Mihail Atanassov <mihail.atanassov@arm.com> Signed-off-by:
Liviu Dudau <Liviu.Dudau@arm.com>
-
Mihail Atanassov authored
Apply image enhacement when we are upscaling by a factor of 2 or more in either direction. Signed-off-by:
-
Mihail Atanassov authored
Enable the scaling engine for upscaling a single plane using the polyphase scaler. No image enhancement support or downscaling yet*, and composition result scaling is not implemented. * Downscaling a plane requires mclk > pxlclk. Signed-off-by:
-
Liviu Dudau authored
Add a core_id file in the driver's sysfs directory, exposing the hardware CORE ID. This is useful to allow userspace to discover the hardware version used. Signed-off-by:
-
Mihail Atanassov authored
All DPs have a COLORADJ matrix which is applied prior to output gamma. Attach that to the CTM property. Also, ensure the input CTM's coefficients can fit in the DP registers' Q3.12 format. Signed-off-by:
-
Mihail Atanassov authored
Add gamma via the DRM GAMMA_LUT/GAMMA_LUT_SIZE CRTC properties. The expected LUT size is 4096 in order to produce as accurate a set of segments as possible. This version uses only the green channel's gamma curve to set the hardware curve on DP550/650. For the sake of simplicity, it uses the same table of coefficients for all 3 curves on DP500. Signed-off-by:
-
Mihail Atanassov authored
Add a custom CRTC state struct to enable storing driver's private state. This patch only adds the base drm_crtc_state struct and the atomic functions that handle it. Signed-off-by:
-
Mihail Atanassov authored
Now that we are using a custom plane state in mali-dp, we need a bespoke reset that takes into account the larger structure. Signed-off-by:
-
Arnd Bergmann authored
The newly introduced function causes a harmless build warning: drivers/gpu/drm/arm/malidp_planes.c: In function 'malidp_plane_atomic_print_state': drivers/gpu/drm/arm/malidp_planes.c:98:23: error: unused variable 'mp' [-Werror=unused-variable] The variable serves no purpose here and can be removed. Fixes: 242f43b69c61 ("drm: mali-dp: add atomic_print_state for planes") Signed-off-by: -
Mihail Atanassov authored
Add function to dump the state of the plane. Signed-off-by:
-
Liviu Dudau authored
Enable runtime and system Power Management. Clocks are now managed from malidp_crtc_{enable,disable} functions. Suspend-to-RAM tested as working on Juno. Signed-off-by: -
Liviu Dudau authored
Mali DP needs to have all the planes that are becoming inactive in the new state disabled before re-enabling the active CRTC, otherwise we start streaming out data from old pointers in memory. Signed-off-by:
-
- 21 Apr, 2017 2 commits
-
-
Øyvind A. Holm authored
Change "S_IRUSR | S_IWUSR" to "0600", it's easier to parse mentally. This change should be part of commit 50f83737 ("drm/vmwgfx: Revert "drm/vmwgfx: Replace numeric parameter like 0444 with macro""), but the patch was truncated somewhere in the patch route, so add the missing change. Extract from the original commit message: commit 50f83737 Author: Øyvind A. Holm <sunny@sunbase.org> Date: Thu Mar 23 14:54:48 2017 -0700 drm/vmwgfx: Revert "drm/vmwgfx: Replace numeric parameter like 0444 with macro" This reverts commit 2d8e60e8 ("drm/vmwgfx: Replace numeric parameter like 0444 with macro") The commit belongs to the series of 1285 patches sent to LKML on 2016-08-02, it changes the representation of file permissions from the octal value "0600" to "S_IRUSR | S_IWUSR". The general consensus was that the changes does not increase readability, quite the opposite; 0600 is easier to parse mentally than S_IRUSR | S_IWUSR. Signed-off-by:
Øyvind A. Holm <sunny@sunbase.org> Reviewed-by:
Sinclair Yeh <syeh@vmware.com>
-
Dave Airlie authored
Merge tag 'drm-misc-next-fixes-2017-04-20' of git://anongit.freedesktop.org/git/drm-misc into drm-next drm-misc-next-fixes-2017-04-20 Core changes: - Maintain sti via drm-misc (Vincent) - Rename dma_buf_ops->kmap_* to avoid naming collision (Logan) Driver changes: - Fix UHD displays on stih407 (Vincent) - Fix uninitialized var return in atmel-hlcdc (Dan) * tag 'drm-misc-next-fixes-2017-04-20' of git://anongit.freedesktop.org/git/drm-misc: dma-buf: Rename dma-ops to prevent conflict with kunmap_atomic macro drm: atmel-hlcdc: Uninitialized return in atmel_hlcdc_create_outputs() drm/sti: fix GDP size to support up to UHD resolution MAINTAINERS: add drm/sti driver into drm-misc
-
- 20 Apr, 2017 1 commit
-
-
Logan Gunthorpe authored
Seeing the kunmap_atomic dma_buf_ops share the same name with a macro in highmem.h, the former can be aliased if any dma-buf user includes that header. I'm personally trying to include highmem.h inside scatterlist.h and this breaks the dma-buf code proper. Christoph Hellwig suggested [1] renaming it and pushing this patch ASAP. To maintain consistency I've renamed all four of kmap* and kunmap* to be map* and unmap*. (Even though only kmap_atomic presently conflicts.) [1] https://www.spinics.net/lists/target-devel/msg15070.htmlSigned-off-by:
Logan Gunthorpe <logang@deltatee.com> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by:
Sumit Semwal <sumit.semwal@linaro.org> Signed-off-by:
-
