- 14 Oct, 2019 1 commit
-
-
Chris Wilson authored
drivers/gpu/drm/i915/intel_memory_region.o: in function `igt_mock_contiguous': drivers/gpu/drm/i915/selftests/intel_memory_region.c:166: undefined reference to `__umoddi3' v2: promote target to u64 for consistency across all builds Reported-by:
kbuild test robot <lkp@intel.com> Fixes: 2f0b97ca ("drm/i915/region: support contiguous allocations") Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Matthew Auld <matthew.auld@intel.com> Reviewed-by:
Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191013114509.3405-1-chris@chris-wilson.co.uk
-
- 13 Oct, 2019 1 commit
-
-
Chris Wilson authored
Use a local variable to track the allocation errors to avoid polluting the struct and keep the free simple. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Lionel Landwerlin <lionel.g.landwerlin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191013095211.2922-1-chris@chris-wilson.co.uk
-
- 12 Oct, 2019 7 commits
-
-
Chris Wilson authored
When we are watching a particular context, we want the OA config to be applied inline with that context such that it takes effect before the next submission. Signed-off-by:
-
Lionel Landwerlin authored
We haven't run into issues with programming the global OA/NOA registers configuration from CPU so far, but HW engineers actually recommend doing this from the command streamer. On TGL in particular one of the clock domain in which some of that programming goes might not be powered when we poke things from the CPU. Since we have a command buffer prepared for the execbuffer side of things, we can reuse that approach here too. This also allows us to significantly reduce the amount of time we hold the main lock. v2: Drop the global lock as much as possible v3: Take global lock to pin global v4: Create i915 request in emit_oa_config() to avoid deadlocks (Lionel) v5: Move locking to the stream (Lionel) v6: Move active reconfiguration request into i915_perf_stream (Lionel) v7: Pin VMA outside request creation (Chris) Lock VMA before move to active (Chris) v8: Fix double free on stream->initial_oa_config_bo (Lionel) Don't allow interruption when waiting on active config request (Lionel) Signed-off-by: -
Lionel Landwerlin authored
NOA configuration take some amount of time to apply. That amount of time depends on the size of the GT. There is no documented time for this. For example, past experimentations with powergating configuration changes seem to indicate a 60~70us delay. We go with 500us as default for now which should be over the required amount of time (according to HW architects). v2: Don't forget to save/restore registers used for the wait (Chris) v3: Name used CS_GPR registers (Chris) Fix compile issue due to rebase (Lionel) v4: Fix save/restore helpers (Umesh) v5: Move noa_wait from drm_i915_private to i915_perf_stream (Lionel) v6: Add missing struct declarations in i915_perf.h Signed-off-by: -
Lionel Landwerlin authored
Here we introduce a mechanism by which the execbuf part of the i915 driver will be able to request that a batch buffer containing the programming for a particular OA config be created. We'll execute these OA configuration buffers right before executing a set of userspace commands so that a particular user batchbuffer be executed with a given OA configuration. This mechanism essentially allows the userspace driver to go through several OA configuration without having to open/close the i915/perf stream. v2: No need for locking on object OA config object creation (Chris) Flush cpu mapping of OA config (Chris) v3: Properly deal with the perf_metric lock (Chris/Lionel) v4: Fix oa config unref/put when not found (Lionel) v5: Allocate BOs for configurations on the stream instead of globally (Lionel) v6: Fix 64bit division (Chris) v7: Store allocated config BOs into the stream (Lionel) Signed-off-by: -
Chris Wilson authored
Sometimes we want to emit a terminator request, a request that flushes the pipeline and allows no request to come after it. This can be used for a "preempt-to-idle" to ensure that upon processing the context-switch to that request, all other active contexts have been flushed. Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191012070136.32058-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
We set out-of-bound parameters inside the i915_requests.flags field, such as disabling preemption or marking the end-of-context. We should not coalesce consecutive requests if they have differing instructions as we only inspect the last active request in a context. Thus if we allow a later request to be merged into the same execution context, it will mask any of the earlier flags. References: 2a98f4e6 ("drm/i915: add infrastructure to hold off preemption on a request") Signed-off-by:
-
Chris Wilson authored
As we now have a specific engine to use OA on, exchange the top-level runtime-pm wakeref with the engine-pm. This still results in the same top-level runtime-pm, but with more nuances to keep the engine and its gt awake. Signed-off-by:
-
- 11 Oct, 2019 5 commits
-
-
Chris Wilson authored
Add the missing serialisation on the request for a write into a vma to wait until that vma is bound before being executed by the GPU. Signed-off-by:
-
Chris Wilson authored
Sometimes a test has to wait for RCU to complete a grace period and perform its callbacks, for example waiting for a close(fd) to actually perform the fput(filp) and so trigger all the callbacks such as closing GEM contexts. There is no trivial means of triggering an RCU barrier from userspace, so add one for our convenience in debugfs/i915_drop_caches Signed-off-by:
Matthew Auld <matthew.william.auld@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191011173823.20432-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
Only the requests that have not completed do we want to change the status of to signal the -EIO when cancelling the inflight set of requests upon wedging. Reported-by:
-
Chris Wilson authored
Before we BUG out with bad pending state, leave a telltale as to which test failed. Signed-off-by:
-
Chris Wilson authored
Since writing the comment that the scheduler is entirely passive, we've added minimal timeslicing which adds the most primitive of active elements (a timeout and reschedule). Signed-off-by:
-
- 10 Oct, 2019 14 commits
-
-
James Ausmus authored
Starting from TGL, we now need to read the SAGV block time via a PCODE mailbox, rather than having a static value. BSpec: 49326 v2: Fix up pcode val data type (Ville), tighten variable scope (Ville) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by:
James Ausmus <james.ausmus@intel.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191004221449.1317-2-james.ausmus@intel.com Link: https://patchwork.freedesktop.org/patch/msgid/20191009172315.11004-2-lucas.demarchi@intel.com
-
James Ausmus authored
In prep for newer platforms having more complicated ways to determine the SAGV block time, move the variable to dev_priv, and extract the setting to an initial setup function. While we're at it, update the if ladder to follow the new gen -> old gen order preference, and warn on any non-specified gen. v2: Shorten the function name (Ville), return directly (Ville), move sagv_block_time_us value to dev_priv (Ville) v3: Change sagv_block_time_us to u32 (Lucas), Change fallback value to -1 (Lucas), use intel_has_sagv for setup check rather than hand-rolling (Lucas) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by:
-
Chris Wilson authored
Now that we have the engine stored in i915_perf, we have a means of accessing intel_gt should we require it. However, we are currently only using the intel_gt to find the right intel_uncore, so replace our i915_perf.gt pointer with the more useful i915_perf.uncore. Signed-off-by:
-
Lionel Landwerlin authored
We'll use this information later to verify that a client trying to reconfigure the stream does so on the right engine. For now, we want to pull the knowledge of which engine we use into a central property. Signed-off-by:
-
Maarten Lankhorst authored
We have a src and dect rectangle, use it instead of relying on the core drm properties. Because the core by default clips the src/dst properties, after the drm_atomic_helper_check_plane_state() we manually set the unclipped src/dst rectangles. We still need the call for visibility checks, but this way we are able to use the src/dst rects in the check/commit code. This removes the special case in the watermark code for cursor w/h. Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191004113514.17064-5-maarten.lankhorst@linux.intel.comReviewed-by:
-
Maarten Lankhorst authored
This can all be done from the intel_update_crtc function. Split out the pipe update into a separate function, just like is done for the planes. Pull in all the changes done during fastset as well. It makes no sense for it to still exist as a separate function. Changes since v1: - Inline intel_update_pipe_config() Changes since v2: - Add comments suggested by matt. - Reorder commit_pipe_config() to remove all nesting. (Ville, Matt) - Use intel_set_pipe_src_size((). (Matt) Changes since v3: - Move atomic_update_watermarks closer to the plane calls. Signed-off-by:
Matt Roper <matthew.d.roper@intel.com> [mlankhorst: Replace 8 spaces with tabs in comment]
-
Maarten Lankhorst authored
We need to look at the hw fb in the plane split, so replace all the places that use drm_plane_state with intel_plane_state. Signed-off-by:
-
Maarten Lankhorst authored
Instead of looking at drm_plane_state, look at intel_plane_state directly. This will allow us to make the watermarks bigjoiner aware, when we make it work for bigjoiner slave pipes as well. Signed-off-by:
-
Maarten Lankhorst authored
Using for_each_intel_plane_mask() fails because of an extra bracket, remove the bracket so we can use it in the next commit. Signed-off-by:
-
Chris Wilson authored
Make sure that we copy across the registers from one engine to the next, as we hop around a virtual engine. Signed-off-by:
-
Chris Wilson authored
Move the BUG_ON around slightly and add some explanations for each to try and capture the expected state more carefully. We want to compare the expected active state of our bookkeeping as compared to the tracked HW state. References: https://bugs.freedesktop.org/show_bug.cgi?id=111937Signed-off-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191010083242.1387-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
If we have a wedged GPU that we need to recover, but fail, add a taint for CI to pickup and schedule a reboot. Signed-off-by:
Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191002160034.5121-1-chris@chris-wilson.co.uk
-
Daniele Ceraolo Spurio authored
There are small differences between the blitter and the video engines in the xcs context image (e.g. registers 0x200 and 0x204 only exist on the blitter). Since we never explicitly set a value for those register and given that we don't need to update the offsets in the lrc image when we change engine within the class for virtual engine because the HW can handle that, instead of having a separate define for the BCS we can just restrict the programming to the part we're interested in, which is common across the engines. Bspec: 45584 Signed-off-by:
Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Stuart Summers <stuart.summers@intel.com> Reviewed-by:
-
Daniele Ceraolo Spurio authored
The specs don't mention any specific HW limitation on the blitter and manual inspection shows that the HW does set the relative MMIO bit in the LRI of the blitter context image, so we can remove our limitations. Signed-off-by:
-
- 09 Oct, 2019 7 commits
-
-
Chris Wilson authored
The active/pending execlists is no longer protected by the engine->active.lock, but is serialised by the tasklet instead. Update the locking around the debug and stats to follow suit. v2: local_bh_disable() to prevent recursing into the tasklet in case we trigger a softirq (Tvrtko) Fixes: df403069 ("drm/i915/execlists: Lift process_csb() out of the irq-off spinlock") Signed-off-by:
-
Chris Wilson authored
Now that we dropped the engine->active.lock serialisation from around process_csb(), direct submission can run concurrently to the interrupt handler. As such execlists->active may be advanced as we dequeue, dropping the reference to the request. We need to employ our RCU request protection to ensure that the request is not freed too early. Fixes: df403069 ("drm/i915/execlists: Lift process_csb() out of the irq-off spinlock") Signed-off-by:
-
Matt Roper authored
This slightly simplifies the EHL DPLL4 handling and also gives us more flexibility in the future in case we need to skip the use of specific PLL's (e.g., due to hardware workarounds and such). v2: - Replace GENMASK() with or'd BIT()'s to make the specific DPLLs more explicit. (Ville) - s/unsigned/unsigned long/. (Lucas) Cc: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by:
-
Swati Sharma authored
Moved common code to check gamma_enable to specific funcs per platform in bit_precision func. icl doesn't support that and chv has separate enable knob for CGM LUT. v2: -Simplified chv_gamma_precision() [Ville] Signed-off-by:
Swati Sharma <swati2.sharma@intel.com> Signed-off-by:
-
Swati Sharma authored
Premature gamma lut prepration and loading which was getting reflected in first modeset causing different colors on screen during boot. Issue: In BIOS, gamma is disabled by default. However, legacy read_luts() was setting crtc_state->base.gamma_lut and gamma_lut was programmed with junk values which led to visual artifacts (different colored screens instead of usual black during boot). Fix: Calling read_luts() only when gamma is enabled which will happen after first modeset. This fix is independent from the revert 1b858874 ("Revert "drm/i915/color: Extract icl_read_luts()"") and should fix different colors on screen in legacy platforms too. v2: -Added gamma_enable checks inside read_luts() [Ville/Jani N] -Corrected gamma enable check for CHV [Ville] v3: -Added check in ilk_read_luts() [Ville] -Simplified gamma enable check for CHV [Ville] Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111809 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111885Tested-by:
Jani Saarinen <jani.saarinen@intel.com> Signed-off-by:
-
Colin Ian King authored
In the case where data fails to be allocated the error exit path is via label 'out' where data is dereferenced in a for-loop. Fix this by exiting via the label 'out_file' instead to avoid the null pointer dereference. Addresses-Coverity: ("Dereference after null check") Fixes: 50d16d44 ("drm/i915/selftests: Exercise context switching in parallel") Signed-off-by:Colin Ian King <colin.king@canonical.com> Reviewed-by:
-
Chris Wilson authored
Take a reference on the request before submitting it to the HW and then waiting on it for selftest_workarounds. Once submitted, the request may be freed by a background worker, unless we take an extra reference for ourselves. References: https://bugs.freedesktop.org/show_bug.cgi?id=111926Signed-off-by:
-
- 08 Oct, 2019 5 commits
-
-
Chris Wilson authored
Assign a separate lockclass to the perma-pinned timelines of the kernel_context, such that we can use them from within the user timelines should we ever need to inject GPU operations to fixup faults during request construction. Signed-off-by:
-
Matthew Auld authored
Volatile objects are marked as DONTNEED while pinned, therefore once unpinned the backing store can be discarded. This is limited to kernel internal objects. Signed-off-by:
CQ Tang <cq.tang@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Abdiel Janulgue <abdiel.janulgue@linux.intel.com> Reviewed-by:
-
Matthew Auld authored
Some kernel internal objects may need to be allocated as a contiguous block, also thinking ahead the various kernel io_mapping interfaces seem to expect it, although this is purely a limitation in the kernel API...so perhaps something to be improved. Signed-off-by:
-
Matthew Auld authored
Support memory regions, as defined by a given (start, end), and allow creating GEM objects which are backed by said region. The immediate goal here is to have something to represent our device memory, but later on we also want to represent every memory domain with a region, so stolen, shmem, and of course device. At some point we are probably going to want use a common struct here, such that we are better aligned with say TTM. Signed-off-by:
Abdiel Janulgue <abdiel.janulgue@linux.intel.com> Signed-off-by:
Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by:
-
Chris Wilson authored
A common bane of ours is arbitrary delays in ksoftirqd processing our submission tasklet. Give the submission tasklet a kick before we wait to avoid those delays eating into a tight timeout. Signed-off-by:
Stuart Summers <stuart.summers@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191008105655.13256-1-chris@chris-wilson.co.uk
-
