- 09 Oct, 2019 8 commits
-
-
Douglas Anderson authored
I'm embarassed to say that even though I've touched vop_crtc_mode_fixup() twice and I swear I tested it, there's still a stupid glaring bug in it. Specifically, on veyron_minnie (with all the latest display timings) we want to be setting our pixel clock to 66,666,666.67 Hz and we tell userspace that's what we set, but we're actually choosing 66,000,000 Hz. This is confirmed by looking at the clock tree. The problem is that in drm_display_mode_from_videomode() we convert from Hz to kHz with: dmode->clock = vm->pixelclock / 1000; ...and drm_display_mode_from_videomode() is called from panel-simple when we have an "override_mode" like we do on veyron_minnie. See commit 123643e5 ("ARM: dts: rockchip: Specify rk3288-veyron-minnie's display timings"). ...so when the device tree specifies a clock of 66666667 for the panel then DRM translates that to 66666000. The clock framework will always pick a clock that is _lower_ than the one requested, so it will refuse to pick 66666667 and we'll end up at 66000000. While we could try to fix drm_display_mode_from_videomode() to round to the nearest kHz and it would fix our problem, it wouldn't help if the clock we actually needed was 60,000,001 Hz. We could alternatively have DRM always round up, but maybe this would break someone else who already baked in the assumption that DRM rounds down. Specifically note that clock drivers are not consistent about whether they round up or round down when you call clk_set_rate(). We know how Rockchip's clock driver works, but (for instance) you can see that on most Qualcomm clocks the default is clk_rcg2_ops which rounds up. Let's solve this by just adding 999 Hz before calling clk_round_rate(). This should be safe and work everywhere. As discussed in more detail in comments in the commit, Rockchip's PLLs are configured in a way that there shouldn't be another PLL setting that is only a few kHz off so we won't get mixed up. NOTE: if this is picked to stable, it's probably easiest to first pick commit 527e4ca3 ("drm/rockchip: Base adjustments of the mode based on prev adjustments") which shouldn't hurt in stable. Fixes: b59b8de3 ("drm/rockchip: return a true clock rate to adjusted_mode") Signed-off-by:
Douglas Anderson <dianders@chromium.org> Reviewed-by:
Sean Paul <seanpaul@chromium.org> Signed-off-by:
-
Steven Price authored
panfrost_core_dump() has never existed in mainline, so remove it and add a TODO entry that core dump support is currently lacking. Signed-off-by:
Steven Price <steven.price@arm.com> Signed-off-by:
Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191009094456.9704-2-steven.price@arm.com
-
Steven Price authored
Panfrost uses multiple schedulers (one for each slot, so 2 in reality), and on a timeout has to stop all the schedulers to safely perform a reset. However more than one scheduler can trigger a timeout at the same time. This race condition results in jobs being freed while they are still in use. When stopping other slots use cancel_delayed_work_sync() to ensure that any timeout started for that slot has completed. Also use mutex_trylock() to obtain reset_lock. This means that only one thread attempts the reset, the other threads will simply complete without doing anything (the first thread will wait for this in the call to cancel_delayed_work_sync()). While we're here and since the function is already dependent on sched_job not being NULL, let's remove the unnecessary checks. Fixes: aa202367 ("drm/panfrost: Prevent concurrent resets") Tested-by:
Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
-
Steven Price authored
devm_regulator_get() is used to populate pfdev->regulator which ensures that this cannot be NULL (a dummy regulator will be returned if necessary). So remove the check in panfrost_devfreq_target(). Signed-off-by:
-
Simon Ser authored
Currently the property docs don't specify whether it's okay for two planes to have the same zpos value and what user-space should expect in this case. The unspoken, legacy rule used in the past was to make user-space figure out the zpos from object IDs. However some drivers break this rule, that's why the ordering is documented as unspecified in case the zpos property is missing. User-space should rely on the zpos property only. There are some cases in which user-space might read identical zpos values for different planes. For instance, in case the property is mutable, user-space might set two planes' zpos to the same value. This is necessary to support user-space using the legacy DRM API where atomic commits are not possible: user-space needs to update the planes' zpos one by one. Because of this, user-space should handle multiple planes with the same zpos. While at it, remove the assumption that zpos is only for overlay planes. Additionally, update the drm_plane_state.zpos docs to clarify that zpos disambiguation via plane object IDs is a recommendation for drivers, not something user-space can rely on. In other words, when user-space sets the same zpos on two planes, drivers should rely on the plane object ID. v2: clarify drm_plane_state.zpos docs (Daniel) v3: zpos is for all planes (Marius, Daniel) v4: completely reword the drm_plane_state.zpos docs to make it clear the recommendation to use plane IDs is for drivers in case user-space uses duplicate zpos values (Pekka) v5: reword commit message (Pekka, James) v6: remove mention of Arm GPUs having planes which can't overlap, because this isn't uAPI yet (Daniel) Signed-off-by:
Simon Ser <contact@emersion.fr> Reviewed-by:
Pekka Paalanen <ppaalanen@gmail.com> Cc: Marius Vlad <marius.vlad@collabora.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: James Qian Wang <james.qian.wang@arm.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/T5nHrvXH0GKOp6ONaFHk-j2cwEb4_4C_sBz9rNw8mmPACuut-DQqC74HMAFKZH3_Q15E8a3YnmKCxap-djKA71VVZv_T-tFxaB0he13O7yA=@emersion.fr
-
zhong jiang authored
I hit the following error when compile the kernel. drivers/gpu/drm/vkms/vkms_composer.o: In function `vkms_composer_worker': vkms_composer.c:(.text+0x5e4): undefined reference to `crc32_le' make: *** [vmlinux] Error 1 Signed-off-by:
zhong jiang <zhongjiang@huawei.com> Signed-off-by:
-
Lee Shawn C authored
Refer to EDID 1.3 spec, display FEATURE (byte 18h) bit #0 said "If this bit is set to 1, the display supports timings based on the GTF standard using default GTF parameter values". And EDID 1.4 spec shows "If bit 0 is set to 0, then the display is noncontinuous frequency (multi-mode) and is only specified to accept the video timing formats that are listed in BASE EDID and certain EXTENSION Blocks. When display feature did not support CVT or GFT2 and monitor's EDID version greater than or equal to "1.2". DRM driver would select GTF as default for standard timing calculation. It may generated some video timing that can't display properly by external monitor. For example. When driver retrieved "0xD1 0xFC" (FHD, 120Hz) and "0xD1 0xE8" (FHD, 100Hz) from "Standard Timings". GTF formula would generate video timing like below. It already over monitor's spec to cause black screen issue. "1920x1080" 120 368881 1920 2072 2288 2656 1080 1081 1084 1157 0x0 0x6 "1920x1080" 100 301992 1920 2072 2280 2640 1080 1081 1084 1144 0x0 0x6 v2: Just confirm GTF flag and omit the revision check. Cc: Jani Nikula <jani.nikula@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Adam Jackson <ajax@redhat.com> Cc: Cooper Chiou <cooper.chiou@intel.com> Signed-off-by:
Lee Shawn C <shawn.c.lee@intel.com> Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191007135127.9538-1-shawn.c.lee@intel.com
-
Colin Ian King authored
The pointer disable_done is being initialized with a value that is never read and is being re-assigned a little later on. The assignment is redundant and hence can be removed. Addresses-Coverity: ("Unused value") Signed-off-by:Colin Ian King <colin.king@canonical.com> Reviewed-by:
James Qian Wang (Arm Technology China) <james.qian.wang@arm.com> Signed-off-by:
-
- 08 Oct, 2019 8 commits
-
-
Oleg Vasilev authored
Bring dmabuf sharing through implementing prime_import_sg_table callback. This will help to validate userspace conformance in prime configurations without using any actual hardware (e.g. in the cloud). This enables kms_prime IGT testcase on vkms. V3: - Rodrigo: remove redundant vkms_gem_create_private V2: - Rodrigo: styleguide + return code check Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> Cc: Haneen Mohammed <hamohammed.sa@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Simon Ser <simon.ser@intel.com> Tested-by:
Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> Reviewed-by:
Oleg Vasilev <oleg.vasilev@intel.com> Signed-off-by:
Oleg Vasilev <omrigann@gmail.com> Signed-off-by:
-
Rodrigo Siqueira authored
For historical reasons, the function drm_wait_vblank_ioctl always return -EINVAL if something gets wrong. This scenario limits the flexibility for the userspace to make detailed verification of any problem and take some action. In particular, the validation of “if (!dev->irq_enabled)” in the drm_wait_vblank_ioctl is responsible for checking if the driver support vblank or not. If the driver does not support VBlank, the function drm_wait_vblank_ioctl returns EINVAL, which does not represent the real issue; this patch changes this behavior by return EOPNOTSUPP. Additionally, drm_crtc_get_sequence_ioctl and drm_crtc_queue_sequence_ioctl, also returns EINVAL if vblank is not supported; this patch also changes the return value to EOPNOTSUPP in these functions. Lastly, these functions are invoked by libdrm, which is used by many compositors; because of this, it is important to check if this change breaks any compositor. In this sense, the following projects were examined: * Drm-hwcomposer * Kwin * Sway * Wlroots * Wayland * Weston * Mutter * Xorg (67 different drivers) For each repository the verification happened in three steps: * Update the main branch * Look for any occurrence of "drmCrtcQueueSequence", "drmCrtcGetSequence", and "drmWaitVBlank" with the command git grep -n "STRING". * Look in the git history of the project with the command git log -S<STRING> None of the above projects validate the use of EINVAL when using drmWaitVBlank(), which make safe, at least for these projects, to change the return values. On the other hand, mesa and xserver project uses drmCrtcQueueSequence() and drmCrtcGetSequence(); this change is harmless for both projects. Change since V5 (Pekka Paalanen): - Check if the change also affects Mutter Change since V4 (Daniel): - Also return EOPNOTSUPP in drm_crtc_[get|queue]_sequence_ioctl Change since V3: - Return EINVAL for _DRM_VBLANK_SIGNAL (Daniel) Change since V2: Daniel Vetter and Chris Wilson - Replace ENOTTY by EOPNOTSUPP - Return EINVAL if the parameters are wrong Cc: Keith Packard <keithp@keithp.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Pekka Paalanen <pekka.paalanen@collabora.com> Signed-off-by:
Daniel Vetter <daniel@ffwll.ch> Acked-by:
Pekka Paalanen <pekka.paalanen@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191002140516.adeyj3htylimmlmg@smtp.gmail.com
-
Rodrigo Siqueira authored
DP 1.3 specification introduces the Link Training-tunable PHY Repeater, and DP 1.4* supplemented it with new features. In the 1.4a spec, it was introduced some innovations to make handy to add support for systems with Thunderbolt or other repeater devices. It is important to highlight that DP specification had some updates from 1.3 through 1.4a. In particular, DP 1.4 defines Repeater_FEC_CAPABILITY at the address 0xf0004, and DP 1.4a redefined the address 0xf0004 to DP_MAX_LANE_COUNT_PHY_REPEATER. Changes since V4: - Update commit message - Fix misleading comments related to the spec version Changes since V3: - Replace spaces by tabs Changes since V2: - Drop the kernel-doc comment - Reorder LTTPR according to register offset Changes since V1: - Adjusts registers names to be aligned with spec and the rest of the file - Update spec comment from 1.4 to 1.4a Cc: Abdoulaye Berthe <Abdoulaye.Berthe@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by:
Abdoulaye Berthe <Abdoulaye.Berthe@amd.com> Reviewed-by:
Harry Wentland <Harry.Wentland@amd.com> Signed-off-by:
-
Sam Ravnborg authored
There is finally no more users left in the kernel of drmP.h and drm_os_linux.h (drmP.h was the only user left). Delete the header files and delete the corresponding todo entry. When we started this quest there was more than 700 users of drmP.h. And drmP.h was a huge cover-it-all header file. Daniel Vetter is the one that followed the work from start to the end and in between many people have contributed to the removal process - thanks to everyone! Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Reviewed-by:
Sean Paul <sean@poorly.run> Reviewed-by:
Lyude Paul <lyude@redhat.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20191007171224.1581-3-sam@ravnborg.org
-
Sam Ravnborg authored
drmP.h is deprecated and will be deleted. Replace use with proper header. Divide header includes in blocks while touching these. Build tested with various archtectures and configs. Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: Dariusz Marcinkiewicz <darekm@google.com> Cc: Ben Skeggs <bskeggs@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191007171224.1581-2-sam@ravnborg.org
-
Wen He authored
Configure the display Quality of service (QoS) levels priority if the optional property node "arm,malidp-aqros-value" is defined in DTS file. QoS signaling using AQROS and AWQOS AXI interface signals, the AQROS is driven from the "RQOS" register, so needed to program the RQOS register to avoid the high resolutions flicker issue on the LS1028A platform. Signed-off-by:
Wen He <wen.he_1@nxp.com> Signed-off-by:
Liviu Dudau <liviu.dudau@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190910075913.17650-2-wen.he_1@nxp.com
-
Sean Paul authored
Since the dirtyfb ioctl doesn't give us any hints as to which plane is scanning out the fb it's marking as damaged, we need to loop through planes to find it. Currently we just reach into plane state and check, but that can race with another commit changing the fb out from under us. This patch locks the plane before checking the fb and will release the lock if the plane is not displaying the dirty fb. Fixes: b9fc5e01 ("drm: Add helper to implement legacy dirtyfb") Cc: Rob Clark <robdclark@gmail.com> Cc: Deepak Rawat <drawat@vmware.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v5.0+ Reported-by:
-
Jagan Teki authored
The LCD timing definitions between Linux DRM vs Allwinner are different, below diagram shows this clear differences. Active Front Sync Back Region Porch Porch <-----------------------><----------------><--------------><--------------> //////////////////////| ////////////////////// | ////////////////////// |.................. ................ ________________ <----- [hv]display -----> <------------- [hv]sync_start ------------> <--------------------- [hv]sync_end ----------------------> <-------------------------------- [hv]total ------------------------------> <----- lcd_[xy] --------> <- lcd_[hv]spw -> <---------- lcd_[hv]bp ---------> <-------------------------------- lcd_[hv]t ------------------------------> The DSI driver misinterpreted the vbp term from the BSP code to refer only to the backporch, when in fact it was backporch + sync. Thus the driver incorrectly used the vertical front porch plus sync in its calculation of the DRQ set bit value, when it should not have included the sync timing. Including additional sync timings leads to flip_done timed out as: WARNING: CPU: 0 PID: 31 at drivers/gpu/drm/drm_atomic_helper.c:1429 drm_atomic_helper_wait_for_vblanks.part.1+0x298/0x2a0 [CRTC:46:crtc-0] vblank wait timed out Modules linked in: CPU: 0 PID: 31 Comm: kworker/0:1 Not tainted 5.1.0-next-20190514-00029-g09e5b0ed0a58 #18 Hardware name: Allwinner sun8i Family Workqueue: events deferred_probe_work_func [<c010ed54>] (unwind_backtrace) from [<c010b76c>] (show_stack+0x10/0x14) [<c010b76c>] (show_stack) from [<c0688c70>] (dump_stack+0x84/0x98) [<c0688c70>] (dump_stack) from [<c011d9e4>] (__warn+0xfc/0x114) [<c011d9e4>] (__warn) from [<c011da40>] (warn_slowpath_fmt+0x44/0x68) [<c011da40>] (warn_slowpath_fmt) from [<c040cd50>] (drm_atomic_helper_wait_for_vblanks.part.1+0x298/0x2a0) [<c040cd50>] (drm_atomic_helper_wait_for_vblanks.part.1) from [<c040e694>] (drm_atomic_helper_commit_tail_rpm+0x5c/0x6c) [<c040e694>] (drm_atomic_helper_commit_tail_rpm) from [<c040e4dc>] (commit_tail+0x40/0x6c) [<c040e4dc>] (commit_tail) from [<c040e5cc>] (drm_atomic_helper_commit+0xbc/0x128) [<c040e5cc>] (drm_atomic_helper_commit) from [<c0411b64>] (restore_fbdev_mode_atomic+0x1cc/0x1dc) [<c0411b64>] (restore_fbdev_mode_atomic) from [<c04156f8>] (drm_fb_helper_restore_fbdev_mode_unlocked+0x54/0xa0) [<c04156f8>] (drm_fb_helper_restore_fbdev_mode_unlocked) from [<c0415774>] (drm_fb_helper_set_par+0x30/0x54) [<c0415774>] (drm_fb_helper_set_par) from [<c03ad450>] (fbcon_init+0x560/0x5ac) [<c03ad450>] (fbcon_init) from [<c03eb8a0>] (visual_init+0xbc/0x104) [<c03eb8a0>] (visual_init) from [<c03ed1b8>] (do_bind_con_driver+0x1b0/0x390) [<c03ed1b8>] (do_bind_con_driver) from [<c03ed780>] (do_take_over_console+0x13c/0x1c4) [<c03ed780>] (do_take_over_console) from [<c03ad800>] (do_fbcon_takeover+0x74/0xcc) [<c03ad800>] (do_fbcon_takeover) from [<c013c9c8>] (notifier_call_chain+0x44/0x84) [<c013c9c8>] (notifier_call_chain) from [<c013cd20>] (__blocking_notifier_call_chain+0x48/0x60) [<c013cd20>] (__blocking_notifier_call_chain) from [<c013cd50>] (blocking_notifier_call_chain+0x18/0x20) [<c013cd50>] (blocking_notifier_call_chain) from [<c03a6e44>] (register_framebuffer+0x1e0/0x2f8) [<c03a6e44>] (register_framebuffer) from [<c04153c0>] (__drm_fb_helper_initial_config_and_unlock+0x2fc/0x50c) [<c04153c0>] (__drm_fb_helper_initial_config_and_unlock) from [<c04158c8>] (drm_fbdev_client_hotplug+0xe8/0x1b8) [<c04158c8>] (drm_fbdev_client_hotplug) from [<c0415a20>] (drm_fbdev_generic_setup+0x88/0x118) [<c0415a20>] (drm_fbdev_generic_setup) from [<c043f060>] (sun4i_drv_bind+0x128/0x160) [<c043f060>] (sun4i_drv_bind) from [<c044b598>] (try_to_bring_up_master+0x164/0x1a0) [<c044b598>] (try_to_bring_up_master) from [<c044b668>] (__component_add+0x94/0x140) [<c044b668>] (__component_add) from [<c0445e1c>] (sun6i_dsi_probe+0x144/0x234) [<c0445e1c>] (sun6i_dsi_probe) from [<c0452ef4>] (platform_drv_probe+0x48/0x9c) [<c0452ef4>] (platform_drv_probe) from [<c04512cc>] (really_probe+0x1dc/0x2c8) [<c04512cc>] (really_probe) from [<c0451518>] (driver_probe_device+0x60/0x160) [<c0451518>] (driver_probe_device) from [<c044f7a4>] (bus_for_each_drv+0x74/0xb8) [<c044f7a4>] (bus_for_each_drv) from [<c045107c>] (__device_attach+0xd0/0x13c) [<c045107c>] (__device_attach) from [<c0450474>] (bus_probe_device+0x84/0x8c) [<c0450474>] (bus_probe_device) from [<c0450900>] (deferred_probe_work_func+0x64/0x90) [<c0450900>] (deferred_probe_work_func) from [<c0135970>] (process_one_work+0x204/0x420) [<c0135970>] (process_one_work) from [<c013690c>] (worker_thread+0x274/0x5a0) [<c013690c>] (worker_thread) from [<c013b3d8>] (kthread+0x11c/0x14c) [<c013b3d8>] (kthread) from [<c01010e8>] (ret_from_fork+0x14/0x2c) Exception stack(0xde539fb0 to 0xde539ff8) 9fa0: 00000000 00000000 00000000 00000000 9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 9fe0: 00000000 00000000 00000000 00000000 00000013 00000000 ---[ end trace 495200a78b24980e ]--- random: fast init done [drm:drm_atomic_helper_wait_for_dependencies] *ERROR* [CRTC:46:crtc-0] flip_done timed out [drm:drm_atomic_helper_wait_for_dependencies] *ERROR* [CONNECTOR:48:DSI-1] flip_done timed out [drm:drm_atomic_helper_wait_for_dependencies] *ERROR* [PLANE:30:plane-0] flip_done timed out With the terms(as described in above diagram) fixed, the panel displays correctly without any timeouts. Tested-by:Merlijn Wajer <merlijn@wizzup.org> Signed-off-by:
Jagan Teki <jagan@amarulasolutions.com> Signed-off-by:
Icenowy Zheng <icenowy@aosc.io> Signed-off-by:
Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191006160303.24413-2-icenowy@aosc.io
-
- 07 Oct, 2019 5 commits
-
-
Nishka Dasgupta authored
The static structure tilcdc_plane_funcs, of type drm_plane_funcs, is used only when passed the fourth argument to drm_plane_init(); however, this fourth parameter is declared as const in the function definition. Hence make tilcdc_plane_funcs constant as well. Issue found with Coccinelle. Signed-off-by:
Nishka Dasgupta <nishkadg.linux@gmail.com> Signed-off-by:
Jyri Sarha <jsarha@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190813090503.9063-1-nishkadg.linux@gmail.com
-
Matthias Kaehlcke authored
The DDC/CI protocol involves sending a multi-byte request to the display via I2C, which is typically followed by a multi-byte response. The internal I2C controller only allows single byte reads/writes or reads of 8 sequential bytes, hence DDC/CI is not supported when the internal I2C controller is used. The I2C transfers complete without errors, however the data in the response is garbage. Abort transfers to/from slave address 0x37 (DDC) with -EOPNOTSUPP, to make it evident that the communication is failing. Signed-off-by:
Matthias Kaehlcke <mka@chromium.org> Reviewed-by:
-
Icenowy Zheng authored
The packet length of DCS long write packet should not be added with 1 when constructing long write packet. Fix this. Signed-off-by:
-
Icenowy Zheng authored
The formula in the BSP kernel indicates that a 16-byte overhead is used when sending the HFP. However, this value is currently set to 6 in the sun6i_mipi_dsi driver, which makes some panels flashing. Fix this overhead value. Signed-off-by:
-
Hans Verkuil authored
It is possible for one HDMI connector to have multiple CEC adapters. The typical real-world scenario is that where one adapter is used when the device is in standby, and one that's better/smarter when the device is powered up. The cec-notifier changes were made with that in mind, but I missed that in order to support this you need to tell cec_notifier_cec_adap_unregister() which adapter you are unregistering from the notifier. Add this additional argument. It is currently unused, but once all drivers use this, the CEC core will be adapted for these use-cases. Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/e9fc8740-6be6-43a7-beee-ce2d7b54936e@xs4all.nl
-
- 05 Oct, 2019 2 commits
-
-
Jonathan Neuschäfer authored
The :doc: reference did not match the DOC comment's name. Fixes: 5fc537bf ("drm/mcde: Add new driver for ST-Ericsson MCDE") Signed-off-by:
Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191002153827.23026-1-j.neuschaefer@gmx.net
-
Peter Griffin authored
Some SoCs like HiKey have 2 reset lines, so update to use the devm_reset_control_array_* variant of the API so that multiple resets can be specified in DT. Cc: Qiang Yu <yuq825@gmail.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Cc: lima@lists.freedesktop.org Signed-off-by:
Peter Griffin <peter.griffin@linaro.org> Signed-off-by:
John Stultz <john.stultz@linaro.org> Signed-off-by:
Qiang Yu <yuq825@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191001182927.70448-1-john.stultz@linaro.org
-
- 04 Oct, 2019 17 commits
-
-
Dan Carpenter authored
The "used" variables here come from the user in the ioctl and it can be negative. It could result in an out of bounds write. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Raymond Smith authored
Add the DRM_FORMAT_MOD_ARM_16X16_BLOCK_U_INTERLEAVED modifier to denote the 16x16 block u-interleaved format used in Arm Utgard and Midgard GPUs. Changes from v1:- 1. Reserved the upper four bits (out of the 56 bits assigned to each vendor) to denote the category of Arm specific modifiers. Currently, we have two categories ie AFBC and MISC. Changes from v2:- 1. Preserved Ray's authorship 2. Cleanups/changes suggested by Brian 3. Added r-bs of Brian and Qiang Signed-off-by:
Raymond Smith <raymond.smith@arm.com> Reviewed-by:
Brian Starkey <brian.starkey@arm.com> Reviewed-by:
Ayan kumar halder <ayan.halder@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191004141222.22337-1-ayan.halder@arm.com
-
Chris Wilson authored
A few callers need to serialise the destruction of their drm_mm_node and ensure it is removed from the drm_mm before freeing. However, to be completely sure that any access from another thread is complete before we free the struct, we require the RELEASE semantics of clear_bit_unlock(). This allows the conditional locking such as Thread A Thread B mutex_lock(mm_lock); if (drm_mm_node_allocated(node)) { drm_mm_node_remove(node); mutex_lock(mm_lock); mutex_unlock(mm_lock); if (drm_mm_node_allocated(node)) drm_mm_node_remove(node); mutex_unlock(mm_lock); } kfree(node); to serialise correctly without any lingering accesses from A to the freed node. Allocation / insertion of the node is assumed never to race with removal or eviction scanning. Signed-off-by:Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191003210100.22250-5-chris@chris-wilson.co.uk
-
Chris Wilson authored
A straightforward conversion of assignment and checking of the boolean state flags (allocated, scanned) into non-atomic bitops. The caller remains responsible for all locking around the drm_mm and its nodes. Signed-off-by:
-
Chris Wilson authored
In preparation for rearranging the booleans into a flags field, ensure all the current users are using the inline helpers and not directly accessing the members. Signed-off-by:
-
Chris Wilson authored
Make dma_fence_enable_sw_signaling() behave like its dma_fence_add_callback() and dma_fence_default_wait() counterparts and perform the test to enable signaling under the fence->lock, along with the action to do so. This ensure that should an implementation be trying to flush the cb_list (by signaling) on retirement before freeing the fence, it can do so in a race-free manner. See also 0fc89b68 ("dma-fence: Simply wrap dma_fence_signal_locked with dma_fence_signal"). v2: Refactor all 3 enable_signaling paths to use a common function. v3: Don't argue, just keep the tracepoint in the existing spot. Signed-off-by:
-
Tomi Valkeinen authored
If use_mclk is false, mclk_mode is written to a register without initialization. This doesn't cause any ill effects as the written value is not used when use_mclk is false. To fix this, write use_mclk only when use_mclk is true. Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190930103840.18970-8-tomi.valkeinen@ti.comReviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com>
-
Tomi Valkeinen authored
Currently the HDMI driver uses always limited range RGB output. This patch improves the behavior by using limited range only if the output is identified as a HDMI display, and VIC > 1. Signed-off-by:
-
Jyri Sarha authored
The core.c just for registering the drivers is kind of useless. Let's get rid of it and register the dss drivers in dss.c. Signed-off-by:
-
Tomi Valkeinen authored
OMAP2 and OMAP3/AM4 have limitations with the scaler: - OMAP2 can only scale XRGB8888 - OMAP3/AM4 can only scale XRGB8888, RGB565, YUYV and UYVY The driver doesn't check these limitations, which leads to sync-lost floods. This patch adds a check for the pixel formats when scaling. Signed-off-by:
-
Alejandro Hernandez authored
A "HDMI I2C Master Error" is sometimes reported with the current DDC SCL timings. The current settings for a 10us SCL period (100 KHz) causes the error with some displays. This patch increases the SCL signal period from 10us to 10.2us, with the new settings the error is not observed Signed-off-by:
Alejandro Hernandez <ajhernandez@ti.com> Signed-off-by:
-
Tomi Valkeinen authored
Avoid unnecessary copy in mgr_fld_read/write by taking a pointer to the reg_resc and using that. Signed-off-by:
-
Tomi Valkeinen authored
Commit d49cd155 ("OMAPDSS: DISPC: lock access to DISPC_CONTROL & DISPC_CONFIG") added locking to mgr_fld_write(). This was needed in omapfb times due to lack of good locking, especially in the case of both V4L2 and fbdev layers using the DSS driver. This is not needed for omapdrm, so we can remove the locking. Signed-off-by:
-
Thomas Zimmermann authored
By putting cursor BOs at the high end of the video memory, we can avoid memory fragmentation. Starting at the low end, contiguous video memory is available for framebuffers. The patch also simplifies the buffer swapping and aligns it with the ast driver. If there are more drivers with similar requirements, the code could be moved into a shared place. Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Acked-by:
Gerd Hoffmann <kraxel@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190927091301.10574-8-tzimmermann@suse.de
-
Thomas Zimmermann authored
The double-buffered cursor image is currently stored in video memory by creating two BOs and pinning them to VRAM. The exact location is chosen by VRAM helpers. The pinned cursor BOs can conflict with framebuffer BOs and prevent the primary plane from displaying its framebuffer. As a first step to solving this problem, we reserve dedicated space at the high end of the video memory for the cursor images. As the amount of video memory now differs from the amount of available framebuffer memory, size tests are adapted accordingly. Signed-off-by:
-
Thomas Zimmermann authored
Selecting the correct BO for the new cursor image is not relevant outside of mgag200_show_cursor(). Let the function do the work. Signed-off-by:
-
Thomas Zimmermann authored
Separating the management of buffer objects from updating the hardware cursor buffer gives the code more structure. While doing this, we can further split the image-update code into code for writing the buffer, setting the base scan-out address, and enabling the cursor. The first two operations are in dedicated functions update() and set_base(). Signed-off-by:
-
