- 19 Jun, 2008 1 commit
-
-
Harvey Harrison authored
Fully half of all alsa sparse warnings are from snd_pcm_hw_param_t degrading to integer type, this goes a long way towards eliminating them. Signed-off-by:
Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by:
Jaroslav Kysela <perex@perex.cz>
-
- 18 Jun, 2008 4 commits
-
-
Randy Dunlap authored
Fix sound/soc build failure when CONFIG_PM=n: linux-next-20080617/sound/soc/soc-core.c:829: error: 'soc_resume_deferred' undeclared (first use in this function) soc3.out:make[3]: *** [sound/soc/soc-core.o] Error 1 Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
Added an entry for another MSI K8N Diamond mobo with SSID 1102:1009. Signed-off-by:
-
Takashi Iwai authored
Don't create mixer volume elements for Headphone and Speaker if they use the same DAC as normal line-outs on AD1988. Otherwise the amp value gets screwed up, e.g. https://bugzilla.novell.com/show_bug.cgi?id=398255Signed-off-by:
-
Timur Tabi authored
Fix the Freescale MPC8610 HPCD sound driver so that it programs the DMACR and PMUXCR registers in the global utilities correctly. Signed-off-by:
Timur Tabi <timur@freescale.com> Acked-by:
Liam Girdwood <lg@opensource.wolfsonmicro.com> Signed-off-by:
-
- 17 Jun, 2008 2 commits
-
-
Takashi Iwai authored
Clean up the previous commit for fixing memory leaks. Signed-off-by: -
Jaroslav Kysela authored
The leak was introduced in "[ALSA] emu10k1 - simplify page allocation for synth" commit. Signed-off-by:
-
- 16 Jun, 2008 7 commits
-
-
Jaroslav Kysela authored
But comment only extra code in ak4531_codec.c for history. Signed-off-by: -
Jaroslav Kysela authored
Signed-off-by: -
Takashi Iwai authored
Use the standard upper_32_bits() instead of own macro. Signed-off-by:
-
Takashi Iwai authored
Use bdl_pos_adj=32 as default except for Intel hardwares confirmed to work with bdl_pos_adj=1. Looks like ATI and NVidia require this higher value. Signed-off-by:
-
Andy Green authored
On OpenMoko soc-audio resume is taking 700ms of the whole resume time of 1.3s, dominated by writes to the codec over I2C. This patch shunts the resume guts into a workqueue which then is done asynchronously. The "card" is locked using the ALSA power state APIs as suggested by Mark Brown. [Added fix for race with resume to suspend and fixed a couple of nits from checkpatch -- broonie.] Signed-off-by:
Andy Green <andy@openmoko.com> Signed-off-by:
-
Mark Brown authored
To provide added robustness in case an AC97 controller reads back all zeros in error cases check for an exact match when testing to see if resets have brought the codec back. Signed-off-by:
-
Matthew Ranostay authored
Added support for new family of IDT codecs. Signed-off-by:
Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by:
-
- 13 Jun, 2008 26 commits
-
-
Takashi Iwai authored
snd_ctl_elem_read() and snd_ctl_elem_write() are no longer used by any other drivers. Signed-off-by:
-
Takashi Iwai authored
Removed unused mutex from patch_*.c. Signed-off-by:
-
Takashi Iwai authored
Sort stac9205_cfg_table in the order of id numbers, and removed the duplicated (obsoleted) entries for 0x01fc and 0x01fd. This doesn't change the driver behavior since the old entries are all secondary. The duplication occured due to commit dfe495d0, and the old entries were introduced by commit ae0a8ed8. Signed-off-by:
-
Jarkko Nikula authored
Signed-off-by:
Jarkko Nikula <jarkko.nikula@nokia.com> Signed-off-by:
-
Mike Montour authored
Signed-off-by:
Mike Montour <mail@mmontour.net> Signed-off-by:
-
Mike Montour authored
Signed-off-by:
-
Mike Montour authored
Signed-off-by:
-
Mark Brown authored
Reported-by:
Rodolfo Giometti <giometti@enneenne.com> Signed-off-by:
-
Mark Brown authored
This allows per-DAI initialisation to be done by the CPU DAI drivers. Signed-off-by:
-
Mark Brown authored
Ensure that DAIs are prototyped in the codec drivers that define them. Signed-off-by:
-
Mark Brown authored
ASoC codec drivers frequently set the register cache size using sizeof() rather than ARRAY_SIZE(). For tlv320aicx either is correct since the registers are 8 bit but update to use ARRAY_SIZE() for clarity. Signed-off-by:
-
Mark Brown authored
The register cache size is used by the codec_reg sysfs file which works in terms of the register cache access functions rather than in terms of raw access to the cache so the size specified needs to be in terms of the number of elements. Signed-off-by:
-
Mark Brown authored
The register cache size is used by the codec_reg sysfs file which works in terms of the register cache access functions rather than in terms of raw access to the cache so the size specified needs to be in terms of the number of elements. Signed-off-by:
-
Krzysztof Helt authored
This patch converts the Opti93x driver to use the cs4231 library instead of duplicating the code. Signed-off-by:
Krzysztof Helt <krzysztof.h1@wp.pl> Tested-by:
Rene Herman <rene.herman@gmail.com> Signed-off-by:
-
Krzysztof Helt authored
This patch adds support for WSS compatible Opti93x codec to the cs4231-lib. Signed-off-by:
-
Takashi Iwai authored
The pending IRQ handling is a very hackish workaround and should be avoided as much as possible via a larger bdl_pos_adj option value. Put a warning message if this situation occurs so that the user may have a chance to notice that something is wrong. Signed-off-by:
-
Takashi Iwai authored
Added a brief description of the new bdl_pos_adj option to ALSA-Configuration.txt. Signed-off-by:
-
Takashi Iwai authored
ATI SB controllers seem to report the DMA ahead in the amount of FIFO. Thus bdl_pos_adj should be 32 for them as default. Also, the default value is set to -1, which means to make the driver to choose the appropriate value. Signed-off-by:
-
Takashi Iwai authored
The option bdl_pos_adj should be provided for each card instance instead of a global one because the value depends rather on each controller-chip. Signed-off-by:
-
Takashi Iwai authored
position_fix=3 is the option to correct the DMA position with the FIFO size. But, it never worked correctly, and we have now more other workarounds for the DMA position fixes. Thus better to remove it. Also, change POS_FIX_NONE to POS_FIX_LPIB to represent its real role better. Signed-off-by:
-
Takashi Iwai authored
Added a new option, bdl_pos_adj, to adjust the delay of IRQ-wakeup timing. Most HD-audio hardwares have a problem that a BDL IRQ is issued before actually the data and the DMA pointer are updated. We have already a mechanism to force to delay snd_pcm_period_elapsed() calls via workq, but this costs much CPU, and typically the delay is within one sample. Thus, it's more clever to adjust the BDL entries instead. The new option adds the size of the delay in frames. As default, it's set to 1 -- that is, one sample delay. Even the hardware is really correct, one sample delay is relatively harmless in comparison with reporting wrong positions. Signed-off-by:
-
Adrian Bunk authored
This patch contains the following cleanups: - make the following needlessly global functions static: - dmasound_core.c: get_afmt_string() - dmasound_paula.c: dmasound_paula_init() - dmasound_q40.c: dmasound_q40_init() - remove the following unused global variable: - dmasound_core.c: software_input_volume Signed-off-by:
Adrian Bunk <bunk@kernel.org> Signed-off-by:
-
Takashi Iwai authored
Added the missing GFP_ATOMIC to page_alloc when called with GFP_DMA. GFP_KERNEL often results in stalls for ZONE_DMA, so GFP_ATOMIC is more prgmatic. Signed-off-by:
-
Akio Idehara authored
I have Toshiba dynabook SS RX1 and this patch adds that support. Signed-off-by:
Akio Idehara <zbe64533@gmail.com> Signed-off-by:
-
Krzysztof Helt authored
This patch fixes silenced output from the Opti930. Signed-off-by:
-
Takashi Iwai authored
The power_save option was set as boot although it was meant to be a timeout value like the same option of snd-hda-intel originally. Now fixed to the same style. Signed-off-by:
-
