When destroying a handle, all kernel mappings to that handle
should be destroyed. Other handles may still have references
and valid mappings to the buffer underneath which should not
be destroyed. Loop on the handle reference count, not the buffer
reference count to get rid of all kernel mappings for the handle.
Signed-off-by: Laura Abbott <lauraa@codeaurora.org>
[jstultz: modified patch to apply to staging directory]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Previously the ion_system_heap was using GFP_KERNEL, forcing all allocations
to be in lowmem.  This quickly causes us to run out of lowmem.
Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
[jstultz: modified patch to apply to staging directory]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch sets the dma_address field of the sglist representing
an allocation at allocation time.  This technically breaks the dma api
which states that these addresses should be set when a particular device
takes ownership of a buffer via the dma_map apis.  In the case of our
systems the only dma address space is physical addresses.  Additionally,
we can not afford the overhead of calling dma_map_sg from this location
as it implies a cache invalidate that is not necessary if the memory
was previously mapped cached.  Instead, the expectation is that memory
being returned from the heaps is ready for dma in that if any cached
mappings of that memory exist they have been invalidated.
Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
[jstultz: modified patch to apply to staging directory]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

At least one map_dma() implementation (EXYNOS_CONTIG) assumes the fields
are filled in
Signed-off-by: Greg Hackmann <ghackmann@google.com>
[jstultz: modified patch to apply to staging directory]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch adds an interface to return and sg_table given a
valid ion handle.
Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
[jstultz: modified patch to apply to staging directory]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rather than calling map_dma on the allocations dynamically, this patch
switches to creating the sg_table at the time the buffer is created.
This is necessary because in future updates the sg_table will be used
for cache maintenance.
Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
[jstultz: modified patch to apply to staging directory]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

These ops were added in the 3.4 kernel.  This patch adds support
for them to ion.  Previous ion_map/unmap_kernel api is also
retained in addition to this new api.
Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
[jstultz: modified patch to apply to staging directory]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

With this change the ion_system_heap will only use kernel address
space when the memory is mapped into the kernel (rare case).
Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
[jstultz: modified patch to apply to staging directory]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Ion now uses dma-buf file descriptors to share
buffers with userspace.  Ion becomes a dma-buf
exporter and any driver that can import dma-bufs
can now import ion file descriptors.
Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
[jstultz: modified patch to apply to staging directory]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1. Verifying if the size of memory allocation in ion_alloc() is aligned
by PAGE_SIZE at least. If it is not, this change makes the size to be
aligned by PAGE_SIZE.

2. Unmaps all mappings to the kernel and DMA address spaces when
destroying ion_buffer in ion_buffer_destroy(). This prevents leaks in
those virtual address spaces.

3. Makes the return value of ion_alloc() to be explicit Linux error code
when it fails to allocate a buffer.

4. Makes ion_alloc() implementation simpler. Removes 'goto' statement and
relavant call to ion_buffer_put().

5. Checks if the task is valid before calling put_task_struct() due
to failure on creating a ion client in ion_client_create().

6. Returns error when buffer allocation requested by userspace is failed.
Signed-off-by: KyongHo Cho <pullip.cho@samsung.com>
[jstultz: modified patch to apply to staging directory]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rather than requiring each platform call memblock_remove or reserve
from the board file, add this to ion
Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
[jstultz: modified patch to apply to staging directory]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Switch these api's from scatterlists to sg_tables
Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
[jstultz: modified patch to apply to staging directory]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

__arch_ioremap is no longer available, use __arm_ioremap instead.
Signed-off-by: Colin Cross <ccross@android.com>
[jstultz: modified patch to apply to staging directory]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
[jstultz: Squished in Colin Cross' move to staging change,
also disables ION from the build, as it won't compile till
the end of the patchset]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

As pointed out by the kbuild test robot, and Ian Abbott, the dma >= 0 test
is always true because dma is unsigned. This generates a warn message:

drivers/staging/comedi/drivers/ni_at_a2150.c:715 a2150_attach()
  warn: always true condition '(dma >= 0) => (0-u32max >= 0)'

Fix the test as suggested by Ian Abbott.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The driver was forced to "module only" following a previous failure to build
into the kernel. The problem was resolved several months ago.

This has been successfully tested with "make allyesconfig" on x86_64.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Eli Billauer <eli.billauer@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

byBBPreEDIndex value is initially 0, this means that from
cold BBvUpdatePreEDThreshold is never set.

This means that sensitivity may be in an ambiguous state,
failing to scan any wireless points or at least distant ones.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Change s_vSaveTxPktInfo and BSSvUpdateNodeTxCounter to use vnt_tx_pkt_info
relayed to BSSvUpdateNodeTxCounter via INTnsProcessData.

pStatistic->abyTxPktInfo[byPktNum].byBroadMultiUni is unused and discarded.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use netstats rx_packets and rx_frame_errors.

Add frame errors to RXbBulkInProcessData

The current scStatistic.RxFcsErrCnt only records
USB errors not frame errors.

The scStatistic.RxOkCnt only recorded successful USB
transfers not actual successfully received packets.

So a more accurate reading is to use netstats rx_packets and
rx_frame_errors.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Calculate the qual from the tx_packets and wstats.discard.retries and
apply to wstats.qual.qual

Discard pDevice->scStatistic.LinkQuality.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Apply directly to net_device_stats and wireless stats.

tx_bytes are relayed from s_vSaveTxPktInfo via scStatistic,
so collect them there.

All other statistics in STAvUpdateTDStatCounter are dead code
and don't reach user.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: ZHAO Gang <gamerh2o@gmail.com>
Acked-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: ZHAO Gang <gamerh2o@gmail.com>
Acked-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: ZHAO Gang <gamerh2o@gmail.com>
Acked-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: ZHAO Gang <gamerh2o@gmail.com>
Acked-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: ZHAO Gang <gamerh2o@gmail.com>
Acked-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: ZHAO Gang <gamerh2o@gmail.com>
Acked-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: ZHAO Gang <gamerh2o@gmail.com>
Acked-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

These serve no purpose at all, and can only mask real type
clash issues that one would want to actually see.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This is only part of the original Lustre tree commit. Main part of the
original commit modifies server side code.

Lustre-change: http://review.whamcloud.com/6765
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3467Signed-off-by: Mikhail Pershin <mike.pershin@intel.com>
Reviewed-by: Alex Zhuravlev <alexey.zhuravlev@intel.com>
Reviewed-by: wangdi <di.wang@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Peng Tao <bergwolf@gmail.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

- Move OUT handler to the unified target code, so it can be
  used by both MDS and OST.

Lustre-change: http://review.whamcloud.com/6763
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3467Signed-off-by: Mikhail Pershin <mike.pershin@intel.com>
Reviewed-by: Alex Zhuravlev <alexey.zhuravlev@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
[pick client side of change. target is mostly server side code -- PengTao]
Signed-off-by: Peng Tao <bergwolf@gmail.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Import creates a released file using new RAID pattern flag
Import used a new ioctl() to implement the import in the
client kernel.

Lustre-change: http://review.whamcloud.com/6536
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3363Signed-off-by: JC Lafoucriere <jacques-charles.lafoucriere@cea.fr>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
[Fix up kuid_t/guid_t conversion in llite/file.c -- Peng Tao]
Signed-off-by: Peng Tao <bergwolf@gmail.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This change adds a priority parameter to the route module settings.
This paramter can be >= 0. Like hops, the lower the prioirty number
the higher the priority.  So lower numbered priorities will be
selected over higher numbers.

Lustre-change: http://review.whamcloud.com/5663
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2934Signed-off-by: Doug Oucharek <doug.s.oucharek@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Amir Shehata <amir.shehata@intel.com>
Reviewed-by: Isaac Huang <he.huang@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Peng Tao <bergwolf@gmail.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

These macros are only used on server side.

Cc: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Peng Tao <bergwolf@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch adds lots of comments and it will help others
to review and enhance.
Signed-off-by: Seth Jennings <sjenning@linux.vnet.ibm.com>
Signed-off-by: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Zsmalloc has two methods 1) copy-based and 2) pte based to
access objects that span two pages.
You can see history why we supported two approach from [1].

But it was bad choice that adding hard coding to select arch
which want to use pte based method because there are lots of
SoC in an architecure and they can have different cache size,
CPU speed and so on so it would be better to expose it to user
as selectable Kconfig option like Andrew Morton suggested.

[1] https://lkml.org/lkml/2012/7/11/58Acked-by: Nitin Gupta <ngupta@vflare.org>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

No one seems to be working on it anymore, and it really should be merged
into the already-existing btusb driver.  Also, there is not any proper
author attribution on the code (it was copied from the in-kernel
driver...)

If someone wants to pick this back up, we can easily revert this, but
for now, delete the driver.

Cc: Yu-Chen, Cho <acho@suse.com>
Cc: Jay Hung <jay.hung@mediatek.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch removes C99 style comments from the driver and whenever
possible attempts to match coding style of the rest of the driver.
Signed-off-by: Daniel Dodge <danieldodgese@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

White space clean up and remove camel case from variables.

pDevice-> priv
ntStatus -> status
wLength ->length
pbyAddr -> addr
pbyAgc -> agc
wLengthAgc ->length_agc
abyArray -> array
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>