Don't use a per-master semaphore (ttm lock) for reservation protection, but
rather a per-device semaphore. This is needed since clients connecting using
render nodes aren't master aware.

The ttm lock used should probably be replaced with a reader-write semaphore
once the function down_xx_interruptible() is available.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>

The master management was previously protected by the drm_device::struct_mutex.
In order to avoid locking order violations in a reworked dropped master
security check in the vmwgfx driver, break it out into a separate master_mutex.
Locking order is master_mutex -> struct_mutex.

Also remove drm_master::blocked since it's not used.

v2: Add an inline comment about what drm_device::master_mutex is protecting.
v3: Remove unneeded struct_mutex locks. Fix error returns in
    drm_setmaster_ioctl().
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Acked-by: Daniel Vetter <daniel@ffwll.ch>

It doesn't appear to be used anywhere.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>

Add a drm_is_legacy() helper, constify argument to drm_is_render_client(),
and use / change helpers where appropriate.

v2: s/drm_is_legacy/drm_is_legacy_client/ and adapt to new code context.
v3: s/legacy_client/primary_client/
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>

Like for render-nodes, there is no point in maintaining the master concept
for control nodes, so set the struct drm_file::master pointer to NULL.

At the same time, make sure DRM_MASTER | DRM_CONTROL_ALLOW ioctls are always
allowed when called through the control node. Previously the caller also
needed to be master.

v2: Adapt to refactoring of ioctl permission check.
v3: Formatting of logical expression. Use drm_is_control_client() instead of
    drm_is_control().
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>

Helps reviewing and understanding these checks.
v2: Remove misplaced newlines.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>

control- and render nodes are intended to be master-less.

v2: Replace tests for !legacy with tests for !mode_group for readability.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>

/ssd/git/drm-next/drivers/gpu/drm/i915/i915_cmd_parser.c: In function ‘i915_parse_cmds’:
/ssd/git/drm-next/drivers/gpu/drm/i915/i915_cmd_parser.c:405:4: warning: format ‘%ld’ expects argument of type ‘long int’, but argument 5 has type ‘int’ [-Wformat=]
    DRM_DEBUG_DRIVER("CMD: Command length exceeds batch length: 0x%08X length=%d batchlen=%ld\n",
    ^
Signed-off-by: Dave Airlie <airlied@redhat.com>

Right now a debug message looks like:

  [drm:drm_ioctl], pid=860, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETCRTC

That first comma looks weird as we already have ']' as a separator.
Remove it.

If anyone sees this commit message and also thinks that auth=1 isn't the
most useful info to have here, let's just say I'd happily review a patch
removing it. If I don't get annoyed enough to submit a patch, that is.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

This is always DRM_NAME, so we can just make it part of the format
string instead of asking prink to do it for us.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

The DRM_LOG* macros where the only sites where drm_ut_debug_printk was
called with NULL arguments for prefix and function_name. Now that they
are gone, we can remove that case.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

In the logging code, we are currently checking is we need to output in
drm_ut_debug_printk(). This is too late. The problem is that when we write
something like:

    DRM_DEBUG_DRIVER("ELD on [CONNECTOR:%d:%s], [ENCODER:%d:%s]\n",
                     connector->base.id,
                     drm_get_connector_name(connector),
                     connector->encoder->base.id,
                     drm_get_encoder_name(connector->encoder));

We start by evaluating the arguments (so call drm_get_connector_name() and
drm_get_connector_name()) before ending up in drm_ut_debug_printk() which will
then does nothing.

This means we execute a lot of instructions (drm_get_connector_name(), in turn,
calls snprintf() for example) to happily discard them in the normal case,
drm.debug=0.

So, let's put the test on drm_debug earlier, in the macros themselves.
Sprinkle an unlikely() as well for good measure.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

There are only a few users of the DRM_LOG_KMS() macro. We can simplify
the DRM code a bit by replacing them by DRM_DEBUG_KMS().

Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>

There are only a few users of the DRM_LOG_KMS() macro. We can simplify
the DRM code a bit by replacing them by DRM_DEBUG_KMS().
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

There are only a few users of the DRM_LOG_KMS() macro. We can simplify
the DRM code a bit by replacing them by DRM_DEBUG_KMS().

Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

There are only a few users of the DRM_LOG_KMS() macro. We can simplify
the DRM code a bit by replacing them by DRM_DEBUG_KMS().

Cc: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

This macro was trying to use the non existing DRM_UT_MODE debug category
and looks like it should be covered by DRM_LOG_KMS().
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

That comment wasn't super-readable, so I tried to improve it:

- Put the comment before the values it's documenting
- Add a mention to PRIME
- Reword things a bit to be a lighter read
- Add a note about the option to set the debug value at run-time
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

The recently added PTN3460 device driver uses interfaces that
are provided by the KMS helper infrastructure, so we should
explicitly select that to avoid this linker error:

ERROR: "drm_helper_probe_single_connector_modes" [drivers/gpu/drm/bridge/ptn3460.ko] undefined!
ERROR: "drm_helper_connector_dpms" [drivers/gpu/drm/bridge/ptn3460.ko] undefined!

We have to drop the I2C dependency to avoid a circular dependency
chain, but that's ok because DRM already selects I2C.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Merge branch 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-next

- first stage of (ongoing) gpu fault recovery work
- initial support for maxwell (binary driver fw needed)
- various random fixes across the board

* 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: (87 commits)
  drm/nouveau: fix missing newline
  drm/nouveau/bios: fetch the vbios from PROM using only aligned 32-bit accesses
  drm/nouveau/therm: let the vbios decide on the automatic fan management mode
  drm/nvd7/therm: handle another kind of PWM fans
  drm/nouveau/pm/fan: drop the fan lock in fan_update() before rescheduling
  drm/nouveau: fix small thinko in vblank timestamping.
  drm/nouveau/therm: check for sensor presence with requested mode, not current
  drm/nouveau/disp/dp: allow 540MHz data rate
  drm/nouveau: recognise higher link rate for available dp bw calculations
  drm/nouveau/disp: limit dp capabilities as per dcb
  drm/nva3/fbram: restrict training pattern setup to GT218
  drm/nva3/devinit: restrict script access to some PFB regs
  drm/nouveau/devinit: add interface to check if a mmio access by scripts is ok
  drm/nouveau/bios: have strap reads show on devinit spam debug level
  drm/nv50/gpio: fixup reset for gpios >= 16
  drm/nv50/gpio: exclude sense value from mask when changing registers
  drm/gk104/gr: therm magic needed on some kepler boards
  drm/gm107/gr: initial support
  drm/gf100-/gf: fix a stupid typo, waiting on wrong signal for mmctx
  drm/nouveau/bios: parsing of some random table needed to bring up gr
  ...

Add a missing newline at the end of a DRM_INFO message.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Other kind of accesses are unreliable on Kepler cards. As advised by NVIDIA,
let's only use 32-bit accesses to fetch the vbios from PROM.

This fixes vbios fetching on my nve7 which failed in certain specific
conditions.

I suggest we Cc stable, for all kernels they still maintain after the big
rewrite.
Suggested-by: Christian Zander <czander@nvidia.com>
Signed-off-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

This should fix automatic fan management on fermi cards who do not have
0x46 entries in the thermal table.

On my nve6, the blob sets the default linear range from 40°C to 100°C
but my nvcf's default values are 40°C to 85°C. Let's keep 85 as a default
for everyone.
Signed-off-by: Martin Peres <martin.peres@labri.fr>
Tested-by: Timothée Ravier <tim@siosm.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

This should fix fan management on many nvd7+ chipsets.
Signed-off-by: Martin Peres <martin.peres@labri.fr>
Tested-by: Timothée Ravier <tim@siosm.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

This should fix a deadlock that has been reported to us where fan_update()
would hold the fan lock and try to grab the alarm_program_lock to reschedule
an update. On an other CPU, the alarm_program_lock would have been taken
before calling fan_update(), leading to a deadlock.

We should Cc: <stable@vger.kernel.org> # 3.9+
Reported-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Tested-by: Timothée Ravier <tim@siosm.fr>
Tested-by: Boris Fersing (IRC nick fersingb, no public email address)
Signed-off-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

*hpos horizontal scanout position doesn't need to be corrected
to count the pixels between hactive end and htotal negative.
That is only needed for *vpos to count lines until end of
vblank for the vblank timestamping.

Use hpos as is without correction.

Removes occassional spikes in timestamps of up to 1 scanline
duration, thereby improves accuracy to about +/- 2 usecs instead
of +/- 12 usecs, wrt. true onset time as measured with high
precision equipment on NV-A5.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76319Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

I should resurrect/merge that cleanup branch to remove the weird
duplication.. One day.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

It doesn't look like the others have the registers.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Shouldn't effect anything, was just momentarily confusing while looking
at traces.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Not needed everywhere, and potentially not safe to do depending on how
the rest of PTHERM is configured...
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Our ucode only partially works at this point, so requiring binary fw
image for now.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>