- 16 Aug, 2014 40 commits
-
-
H Hartley Sweeten authored
This function is only called by amplc_dio200_common_attach() and it can never fail. For aesthetics, absorb it into that function. Signed-off-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by:
Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
This member of the boardinfo is only set for the PCIE boards. Use the 'is_pcie' flag to determine if the offset needs to be shifted when reading/writing the registers. Signed-off-by:
-
H Hartley Sweeten authored
This member of the boardinfor is only set for the PCIE boards. For aeshetics, rename it to 'is_pcie'. For clarity, use this flag in the (*auto_attach) to determine if the dio200_pcie_board_setup() function needs to be called instead of using the switch (context_model). Signed-off-by:
-
H Hartley Sweeten authored
The function names provide enough description. The extra comments are not necessary. Remove them. Also, tidy up some of the function declarations. Signed-off-by:
-
H Hartley Sweeten authored
This struct is used to provide part of the boardinfo data. Using the extra indirection does not provide any additional clarity to the driver. Absorb the members from dio200_layout into dio200_board and remove the extra 'layout' indirection. For aesthetics, rename all the local variables used for the boardinfo pointer to 'board'. Signed-off-by:
-
H Hartley Sweeten authored
For aesthetics, add some whitespace to these declarations. Signed-off-by:
-
H Hartley Sweeten authored
For aesthetics, add some whitespace to the declaration. Signed-off-by:
-
Chase Southwood authored
This commit performs a final tidying of the register map defines, bringing them to a state that is ready for merging into addi_apci_1564.c when the time comes. Actions performed include: *Removes the APCI1564_ADDRESS_RANGE macro, which is no longer needed/used. *Renames the APCI1564_DIGITAL_OP_{VCC,CC}_INTERRUPT_{ENABLE,DISABLE} macros to shorter names which are more consistent with the digital input interrupt macros. *Fixes a typo in a comment (dev>iobase changed to dev->iobase). *Renames the APCI1564_TCW_* macros to APCI1564_COUNTER_* names to more accurately reflect that they are only offsets to counter registers (since only the counters are offset from dev->iobase). Signed-off-by:Chase Southwood <chase.southwood@gmail.com> Reviewed-by:
-
Chase Southwood authored
Starting with commit 1496e596 ("staging: comedi: addi_apci_1564: use addi_watchdog module to init watchdog subdevice"), this driver uses the addi_watchdog module to provide support for the watchdog subdevice. Any remaining watchdog code in-driver can and should be removed. This will also make future work on the timer and counter subdevices easier. Signed-off-by:
-
Chase Southwood authored
The DO config function served the purpose of configuring the diagnostic interrupts for the board. As the driver currently does not support diagnostic interrupts, the digital output subdevice does not need an insn_config operation and this function can be safely removed. Signed-off-by:
-
Ramesh Basukala authored
This is a patch to the vendorspecificextn.c that fixes coding style warning message line over 80 characters found by checkpatch.pl script. I am submitting this patch as required by Eudyptula Challenge. Signed-off-by:
Ramesh Basukala <basukalaramesh@gmail.com> Signed-off-by:
-
Phong Tran authored
This patch fix checkpatch.pl warning Tested by compilation only. Signed-off-by:
Phong Tran <tranmanphong@gmail.com> Signed-off-by:
-
Phong Tran authored
This patch fix checkpatch.pl warning Tested by compilation only. Signed-off-by:
-
Phong Tran authored
This patch fix checkpatch.pl warning Tested by compilation only. Signed-off-by:
-
Adrian Remonda authored
This patch removes some unneeded code. 1) kzalloc() allocates 4 extra bytes so that we can align the return value. But actually the return value is already aligned so we can remove the + 4 and the call to N_BYTE_ALIGMENT(). 2) The memset() isn't needed because kzalloc() zeroes the allocation. Suggested-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
Adrian Remonda <adrianremonda@gmail.com> Signed-off-by:
-
Adrian Remonda authored
This is a patch to the hal/rtl8188eu_recv.c file that fixes up a "line over 80 characters" warning found by the checkpatch.pl tool. Signed-off-by:
-
navin patidar authored
Signed-off-by:
navin patidar <navin.patidar@gmail.com> Signed-off-by:
-
navin patidar authored
Signed-off-by:
-
navin patidar authored
Signed-off-by:
-
navin patidar authored
Signed-off-by:
-
navin patidar authored
rtl8188e_IOL_exec_cmds_sync() is a unused function. Signed-off-by:
-
navin patidar authored
Signed-off-by:
-
navin patidar authored
Signed-off-by:
-
navin patidar authored
Signed-off-by:
-
navin patidar authored
Signed-off-by:
-
navin patidar authored
Signed-off-by:
-
navin patidar authored
Signed-off-by:
-
navin patidar authored
Signed-off-by:
-
navin patidar authored
Signed-off-by:
-
navin patidar authored
Signed-off-by:
-
navin patidar authored
driver doesn't require these files anymore. Signed-off-by:
-
navin patidar authored
Cleanup and consolidate Baseband configuration related code in HalHWImg8188E_BB.c file. Signed-off-by:
-
navin patidar authored
Signed-off-by:
-
navin patidar authored
Signed-off-by:
-
navin patidar authored
Signed-off-by:
-
navin patidar authored
Cleanup and consolidate RF configuration related code in HalHWImg8188E_RF.c file. Signed-off-by:
-
navin patidar authored
Signed-off-by:
-
navin patidar authored
Using rtl8188ee's (drivers/net/wireless/rtlwifi/rtl8188ee/fw.c) neat and clean firmware initialization code to replace rtl8188eu's messy firmware initialization code. Signed-off-by:
-
Jeremiah Mahler authored
A sparse warning is generated about 'ieee80211_debug_init' and 'ieee80211_debug_exit' not being declared. drivers/staging/rtl8192u/ieee80211/ieee80211_module.c:275:12: warning: symbol 'ieee80211_debug_init' was not declared. Should it be static? drivers/staging/rtl8192u/ieee80211/ieee80211_module.c:297:13: warning: symbol 'ieee80211_debug_exit' was not declared. Should it be static? These functions are used outside of this file so using static will not work. The prototypes are given in r8192U_core.c but sparse nonetheless still gives a warning. Fix the sparse warning by moving these prototypes from r8192U_core.c to ieee80211.h. Signed-off-by:
Jeremiah Mahler <jmmahler@gmail.com> Cc: Joel Pelaez Jorge <joelpelaez@gmail.com> Cc: Andrea Merello <andrea.merello@gmail.com> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: Joe Perches <joe@perches.com> Cc: Himangi Saraogi <himangi774@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Cc: Ana Rey <anarey@gmail.com> Cc: Chaitanya Hazarey <c@24.io> Cc: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Cc: Teodora Baluta <teobaluta@gmail.com> Signed-off-by:
-
Ovidiu Toader authored
This minor patch motivated by eudyptula challenge fixes the following warnings issued by `sparse' in drivers/staging/rtl8192u/r8192U_wx.c: .../r8192U_wx.c:27:5: warning: symbol 'rtl8180_rates' was not declared. Should it be static? .../r8192U_wx.c:961:22: warning: symbol 'r8192_get_wireless_stats' was not declared. Should it be static? .../r8192U_wx.c:990:24: warning: symbol 'r8192_wx_handlers_def' was not declared. Should it be static? Signed-off-by:
Ovidiu Toader <ovi@phas.ubc.ca> Signed-off-by:
-
