- 02 Aug, 2010 40 commits
-
-
Dan Carpenter authored
NUM_TV_MODES is the same as ARRAY_SIZE(tv_modes). In the end, I decided it was cleaner to remove NUM_TV_MODES and just use ARRAY_SIZE(tv_modes) through out. Signed-off-by:
Dan Carpenter <error27@gmail.com> Signed-off-by:
Eric Anholt <eric@anholt.net>
-
Chris Wilson authored
References: Bug 26691 - Spurious hangcheck whilst executing a long shader over a large vertex buffer https://bugs.freedesktop.org/show_bug.cgi?id=26691Signed-off-by:Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Chris Wilson authored
We generally issue an error message at the point of failure, and so this warning with a fairly pointless stacktrace is superfluous and ugly. Needless to say, the common trigger for this WARN happens to be EIO where this is pure noise. Signed-off-by:
-
Jesse Barnes authored
Since mode->clock is in kHz we should be checking against 2700000 instead of just 27000. This patch gets my x201s working again (well working as well as it ever was anyway). When looking for this I also noticed we set link_bw to 270000, but the calculation is different. Does it also need to use kHz or we using 10kHz internally? Signed-off-by:
Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by:
-
Chris Wilson authored
drivers/gpu/drm/i915/intel_tv.c|479 col 16| warning: cast truncates bits from constant value (8 becomes 0) Signed-off-by:
-
Chris Wilson authored
Signed-off-by:
-
Chris Wilson authored
drivers/gpu/drm/i915/i915_drv.c|485 col 25| warning: symbol 'i915_pm_ops' was not declared. Should it be static? Signed-off-by:
-
Chris Wilson authored
drivers/gpu/drm/i915/i915_drv.c|100 col 18| warning: Initializer entry defined twice drivers/gpu/drm/i915/i915_drv.c|101 col 3| also defined here drivers/gpu/drm/i915/i915_drv.c|117 col 18| warning: Initializer entry defined twice drivers/gpu/drm/i915/i915_drv.c|118 col 3| also defined here Signed-off-by:
-
Chris Wilson authored
drivers/gpu/drm/i915/i915_drv.h|676 col 19| warning: dubious bitfield without explicit `signed' or `unsigned' drivers/gpu/drm/i915/i915_drv.h|712 col 19| warning: dubious bitfield without explicit `signed' or `unsigned' Signed-off-by:
-
Chris Wilson authored
Signed-off-by:
-
Chris Wilson authored
Signed-off-by:
-
Chris Wilson authored
Simple fix for error propagation along the old UMS path. Signed-off-by:
-
Nicolas Kaiser authored
checkpatch complains about this define: WARNING: space prohibited between function name and open parenthesis '(' +#define GEN6_RENDER TIMEOUT_COUNTER_EXPIRED (1 << 6) Signed-off-by:Nicolas Kaiser <nikai@nikai.net> Acked-by:
Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by:
-
Zhao Yakui authored
About 0.2W power can be saved on one HP laptop. Signed-off-by:
Zhao Yakui <yakui.zhao@intel.com> Signed-off-by:
-
Zhao Yakui authored
The hardware team suggest that the "large buffer" method should be used to calculate the cursor watermark under non-SR state as well, which is to avoid the flicker when FBC is enabled on Ironlake. Signed-off-by:
-
Zhao Yakui authored
In SR mode cursor plane watermark calculation uses same formula like display plane. This one fixes the case for 965G and G45. Signed-off-by:
-
Zhao Yakui authored
The total self-refresh fifo entry size for display plane is 512 instead of 128 for 965G. Also fix WM value mask for 965G. About 1.0W power can be saved on one T61 laptop after the self-refresh watermark is configured correctly. Signed-off-by:
-
Zhao Yakui authored
For self-refresh mode WM calculation's "line time" should use mode's htotal instead of hdisplay. "surface width" is the hdisplay for display plane and 64 for cursor plane. Signed-off-by:
-
Zhao Yakui authored
This one adds support for eDP that connected on PCH DP-D port instead of CPU DP-A port, and only DP-D port could be used for eDP. https://bugs.freedesktop.org/show_bug.cgi?id=27220Signed-off-by:
Jan-Hendrik Zab <jan@jhz.name> Tested-by:
Templar <templar@rshc.de> Signed-off-by:
-
Jesse Barnes authored
Having two sets has made me think I caught a bug more than once now. Signed-off-by:
-
Jesse Barnes authored
Signed-off-by:
-
Ondrej Zary authored
When "onboard video memory" is set do "disabled" in BIOS on Asus P4P800-VM board (i865G), kernel oopses with memory corruption: https://bugs.freedesktop.org/show_bug.cgi?id=28430 Fix that by cleanly aborting the initialization. Signed-off-by:
Ondrej Zary <linux@rainbow-software.org> Signed-off-by:
-
Chris Wilson authored
Oops, when merging the extra details following an OOM, I missed that driver_private is now NULL and the correct way to convert from the drm_gem_object into the drm_i915_gem_object is to use to_intel_bo(). BUG: unable to handle kernel NULL pointer dereference at 00000069 IP: [<c11a4a02>] i915_gem_do_execbuffer+0x71f/0xbb6 *pde = 00000000 Oops: 0000 [#1] SMP last sysfs file: /sys/devices/virtual/vc/vcsa3/uevent Pid: 10993, comm: X Not tainted 2.6.35-rc2+ #67 / EIP: 0060:[<c11a4a02>] EFLAGS: 00213202 CPU: 0 EIP is at i915_gem_do_execbuffer+0x71f/0xbb6 EAX: f647e8a8 EBX: 00000000 ECX: 00000003 EDX: 00000000 ESI: 00424000 EDI: 00000000 EBP: f6508e48 ESP: f6508dd4 DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 Process X (pid: 10993, ti=f6508000 task=f6432880 task.ti=f6508000) Stack: f6508de0 f7130000 00000001 00000000 00000000 f647e8a8 00000000 f64f8480 <0> f7974414 00000000 00000006 00000000 00000000 f6578000 00000008 00000006 <0> f6797880 00400000 00000000 ffffffe4 f7974400 000000d0 000000d0 000001c0 Call Trace: [<c11a4f3a>] ? i915_gem_execbuffer2+0xa1/0xe7 [<c118ab96>] ? drm_ioctl+0x22c/0x2fa [<c11a4e99>] ? i915_gem_execbuffer2+0x0/0xe7 [<c107e88c>] ? do_sync_read+0x8f/0xca [<c1088cbd>] ? vfs_ioctl+0x2c/0x96 [<c118a96a>] ? drm_ioctl+0x0/0x2fa [<c10891f4>] ? do_vfs_ioctl+0x429/0x45a [<c107e5c9>] ? fsnotify_access+0x54/0x5f [<c107ee1c>] ? vfs_read+0x9a/0xae [<c1089258>] ? sys_ioctl+0x33/0x4d [<c1002610>] ? sysenter_do_call+0x12/0x26 Code: d0 89 4d c4 31 c9 89 45 d8 eb 44 8b 45 cc 8b 14 88 8b 42 50 89 45 bc 8b 45 a0 8b 52 38 89 55 d0 31 d2 f6 40 20 01 74 0d 8b 55 bc <f6> 42 69 30 0f 95 c2 0f b6 d2 8b 45 d0 c7 45 d4 00 00 00 00 89 EIP: [<c11a4a02>] i915_gem_do_execbuffer+0x71f/0xbb6 SS:ESP 0068:f6508dd4 CR2: 0000000000000069 ---[ end trace 3f1d514b34d39381 ]--- Signed-off-by:
-
Thomas Bächler authored
On some machines (currently only the Toshiba Tecra A11 is known), the GPU locks up when modeset is forced on LID open. This patch adds a new DMI blacklist and omits modesetting for all matches. Fixes https://bugzilla.kernel.org/show_bug.cgi?id=15550Signed-off-by:
Thomas Bächler <thomas@archlinux.org> Reviewed-by:
-
Dave Airlie authored
* 'nouveau/for-airlied' of ../drm-nouveau-next: (77 commits) drm/nouveau: set TASK_(UN)INTERRUPTIBLE before schedule_timeout() drm/nv50: fix some not-error error messages drm/nouveau: introduce gpio engine drm/nv50: correct wait condition for instmem flush drm/nouveau: Fix TV-out detection on unposted cards lacking a usable DCB table. drm/nouveau: Get rid of the remaining VGA CRTC locking. drm/nouveau: Move display init to a new nouveau_engine. drm/nouveau: Put back the old 2-messages I2C slave test. drm/nouveau: Reset AGP before running the init scripts. drm/nv30: Init the PFB+0x3xx memory timing regs. drm/nouveau: disable hotplug detect around DP link training drm/nv50: add function to control GPIO IRQ reporting drm/nouveau: add nv_mask register accessor drm/nouveau: fix build without CONFIG_ACPI drm/nouveau: Reset CRTC owner to 0 before BIOS init. drm/nouveau: No need to lock/unlock the VGA CRTC regs all the time. drm/nouveau: Remove useless CRTC_OWNER logging. drm/nouveau: Add some generic I2C gadget detection code. drm/i2c/ch7006: Don't assume that the specified config points to static memory. drm/nv04-nv3x: Implement init-compute-mem. ... Conflicts: drivers/gpu/drm/nouveau/nouveau_bios.c
-
Dave Airlie authored
* 'drm-radeon-next' of ../drm-radeon-next: (333 commits) drm/radeon/kms: trivial code style fixes for audio drm/radeon: remove viewport transform from r6xx/r7xx blit emit drm/radeon: group r6xx/r7xx newly sequential blit state drm/radeon: reorder r6xx/r7xx blit state emit to make more regs sequential drm/radeon: r6xx/r7xx move vport clipping to a single packet drm/radeon: group r6xx/r7xx sequential blit state drm/radeon: remove duplicate state emit in r6xx/r7xx blit drm/radeon: add comments to r6xx/r7xx blit state drm/radeon/kms/r7xx: add workaround for hw issue with HDP flush drm/radeon/kms: remove rs4xx gart limit drm: radeon: fix sign bug drm/radeon/kms: check/restore sanity before doing anything else with GPU. drm/radeon: fall back to GTT if bo creation/validation in VRAM fails. drm/radeon/kms: add ioport register access drm/radeon/kms: enable HDMI audio on RS600/RS690/RS740 drm/radeon/kms: track audio engine state, do not use not setup timer drm/radeon/kms/r6xx+: add query for tile config (v2) drm/radeon/kms: fix CS alignment checking for tiling (v2) drm/radeon/kms: add tiling support to the cs checker for r6xx/r7xx drm/radeon/kms: Add crtc tiling setup support for evergreen ...
-
Francisco Jerez authored
sil164 transmitters are used for DVI outputs on Intel/nvidia and ATI setups. So far only nouveau can use this driver. Signed-off-by:
Francisco Jerez <currojerez@riseup.net> Tested-by:
Patrice Mandin <patmandin@gmail.com> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
Nicolas Kaiser authored
Fixed brace and spacing coding style issues. Signed-off-by:
-
Nicolas Kaiser authored
Fixed brace and spacing coding style issues. Signed-off-by:
-
Nicolas Kaiser authored
Fixed brace, macro and spacing coding style issues. Signed-off-by:
-
Nicolas Kaiser authored
Fixed brace, macro and spacing coding style issues. Simplified -if (ret) return ret; -return 0; +return ret; Signed-off-by:
-
Rafał Miłecki authored
Signed-off-by:
Rafał Miłecki <zajec5@gmail.com> Signed-off-by:
-
Nicolas Kaiser authored
Fixed brace and spacing coding style issues. Signed-off-by:
-
Nicolas Kaiser authored
Fixed brace, macro and spacing coding style issues, and a C99 comment. Signed-off-by:
-
Chris Wilson authored
The device name is tightly coupled and created at the same time as the master->unique address, so we need to free it with the master. Currently we overwrite it each time we create a new master: unreferenced object 0xe32c54b0 (size 32): comm "Xorg", pid 1455, jiffies 4294721798 (age 3196.879s) hex dump (first 32 bytes): 69 39 31 35 40 70 63 69 3a 30 30 30 30 3a 30 30 i915@pci:0000:00 3a 30 32 2e 30 00 6b 6b 6b 6b 6b 6b 6b 6b 6b a5 :02.0.kkkkkkkkk. backtrace: [<c04e5657>] create_object+0x124/0x1f1 [<c07cf0f0>] kmemleak_alloc+0x4c/0x90 [<c04db84c>] __kmalloc+0x155/0x175 [<f8316665>] drm_setversion+0x11d/0x1b1 [drm] [<f83148d4>] drm_ioctl+0x29a/0x356 [drm] [<c04f27c4>] vfs_ioctl+0x33/0x91 [<c04f31cf>] do_vfs_ioctl+0x46b/0x496 [<c04f3240>] sys_ioctl+0x46/0x66 [<c040325f>] sysenter_do_call+0x12/0x38 [<ffffffff>] 0xffffffff Signed-off-by: -
Chris Wilson authored
/* A typical clean-up sequence for objects stored in an idr tree, will * use idr_for_each() to free all objects, if necessary, then * idr_remove_all() to remove all ids, and idr_destroy() to free * up the cached idr_layers. */ We were missing the vital idr_rmove_all() step and so were leaking the used layers for every dri client: unreferenced object 0xf32133c0 (size 148): comm "plymouthd", pid 131, jiffies 4294678490 (age 2308.030s) hex dump (first 32 bytes): 04 00 00 00 00 00 00 00 00 00 00 00 00 40 19 f3 .............@.. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<c04e5657>] create_object+0x124/0x1f1 [<c07cf100>] kmemleak_alloc+0x4c/0x90 [<c04db6a9>] kmem_cache_alloc+0xee/0x13c [<c05c3d25>] idr_pre_get+0x24/0x61 [<f8315c9c>] drm_gem_handle_create+0x27/0x7f [drm] [<f89925b2>] i915_gem_create_ioctl+0x4f/0x71 [i915] [<f83148ac>] drm_ioctl+0x272/0x356 [drm] [<c04f27c4>] vfs_ioctl+0x33/0x91 [<c04f31cf>] do_vfs_ioctl+0x46b/0x496 [<c04f3240>] sys_ioctl+0x46/0x66 [<c040325f>] sysenter_do_call+0x12/0x38 [<ffffffff>] 0xffffffff Fixes https://bugzilla.kernel.org/show_bug.cgi?id=15803Signed-off-by: -
Kulikov Vasiliy authored
set_current_state() is called only once before the first iteration. After return from schedule_timeout() current state is TASK_RUNNING. If we are going to wait again, set_current_state() must be called. Signed-off-by:
Kulikov Vasiliy <segooon@gmail.com> Signed-off-by:
Ben Skeggs <bskeggs@redhat.com>
-
Chris Wilson authored
Trivial fix to set y1 = y2 = 0. Signed-off-by:
-
Alex Deucher authored
We aren't using it, so no need. Save additional dwords. Signed-off-by:
Alex Deucher <alexdeucher@gmail.com> Signed-off-by:
-
Alex Deucher authored
group state that is emitted sequentially into fewer packets. This saves a number of dwords. Signed-off-by:
-
