- 10 Jun, 2014 40 commits
-
-
Josef Bacik authored
Memory leaks are bad mmkay? Signed-off-by:
Josef Bacik <jbacik@fb.com> Signed-off-by:
Chris Mason <clm@fb.com>
-
Anand Jain authored
I have an opinion that system logs /var/log/messages are valuable info to investigate the real system issues at the data center. People handling data center issues do spend a lot time and efforts analyzing messages files. Having usage error logged into /var/log/messages is something we should avoid. Signed-off-by:
Anand Jain <Anand.Jain@oracle.com> Reviewed-by:
David Sterba <dsterba@suse.cz> Signed-off-by:
-
David Sterba authored
Signed-off-by:
-
David Sterba authored
I've noticed an extra line after "use no compression", but search revealed much more in messages of more critical levels and rare errors. Signed-off-by:
-
Chris Mason authored
We need to NULL the cached_state after freeing it, otherwise we might free it again if find_delalloc_range doesn't find anything. Signed-off-by: -
ZhangZhen authored
use the newer and more pleasant kstrtoull() to replace simple_strtoull(), because simple_strtoull() is marked for obsoletion. Signed-off-by:
Zhang Zhen <zhenzhang.zhang@huawei.com> Signed-off-by:
-
Wang Shilong authored
Seeding device support allows us to create a new filesystem based on existed filesystem. However newly created filesystem's @total_devices should include seed devices. This patch fix the following problem: # mkfs.btrfs -f /dev/sdb # btrfstune -S 1 /dev/sdb # mount /dev/sdb /mnt # btrfs device add -f /dev/sdc /mnt --->fs_devices->total_devices = 1 # umount /mnt # mount /dev/sdc /mnt --->fs_devices->total_devices = 2 This is because we record right @total_devices in superblock, but @fs_devices->total_devices is reset to be 0 in btrfs_prepare_sprout(). Fix this problem by not resetting @fs_devices->total_devices. Signed-off-by:
Wang Shilong <wangsl.fnst@cn.fujitsu.com> Signed-off-by:
-
Guangliang Zhao authored
Even CONFIG_BTRFS_FS_POSIX_ACL is not defined, the acl still could been enabled using a mount option, and now fs/btrfs/acl.o is not built, so the mount options will appear to be supported but will be silently ignored. Signed-off-by:
Guangliang Zhao <lucienchao@gmail.com> Reviewed-by:
-
Josef Bacik authored
This exercises the various parts of the new qgroup accounting code. We do some basic stuff and do some things with the shared refs to make sure all that code works. I had to add a bunch of infrastructure because I needed to be able to insert items into a fake tree without having to do all the hard work myself, hopefully this will be usefull in the future. Thanks, Signed-off-by:
-
Josef Bacik authored
Currently qgroups account for space by intercepting delayed ref updates to fs trees. It does this by adding sequence numbers to delayed ref updates so that it can figure out how the tree looked before the update so we can adjust the counters properly. The problem with this is that it does not allow delayed refs to be merged, so if you say are defragging an extent with 5k snapshots pointing to it we will thrash the delayed ref lock because we need to go back and manually merge these things together. Instead we want to process quota changes when we know they are going to happen, like when we first allocate an extent, we free a reference for an extent, we add new references etc. This patch accomplishes this by only adding qgroup operations for real ref changes. We only modify the sequence number when we need to lookup roots for bytenrs, this reduces the amount of churn on the sequence number and allows us to merge delayed refs as we add them most of the time. This patch encompasses a bunch of architectural changes 1) qgroup ref operations: instead of tracking qgroup operations through the delayed refs we simply add new ref operations whenever we notice that we need to when we've modified the refs themselves. 2) tree mod seq: we no longer have this separation of major/minor counters. this makes the sequence number stuff much more sane and we can remove some locking that was needed to protect the counter. 3) delayed ref seq: we now read the tree mod seq number and use that as our sequence. This means each new delayed ref doesn't have it's own unique sequence number, rather whenever we go to lookup backrefs we inc the sequence number so we can make sure to keep any new operations from screwing up our world view at that given point. This allows us to merge delayed refs during runtime. With all of these changes the delayed ref stuff is a little saner and the qgroup accounting stuff no longer goes negative in some cases like it was before. Thanks, Signed-off-by:
-
Liu Bo authored
According to commit 865ffef3 (fs: fix fsync() error reporting), it's not stable to just check error pages because pages can be truncated or invalidated, we should also mark mapping with error flag so that a later fsync can catch the error. Signed-off-by:
Liu Bo <bo.li.liu@oracle.com> Signed-off-by:
-
Liu Bo authored
Same as normal devices, seed devices should be initialized with fs_info->dev_root as well, otherwise we'll get a NULL pointer crash. Cc: Chris Murphy <lists@colorremedies.com> Reported-by:
Chris Murphy <lists@colorremedies.com> Signed-off-by:
-
Wang Shilong authored
We hit something like the following function call flows: |->run_delalloc_range() |->btrfs_join_transaction() |->cow_file_range() |->btrfs_join_transaction() |->find_free_extent() |->btrfs_join_transaction() Trace infomation can be seen as: [ 7411.127040] ------------[ cut here ]------------ [ 7411.127060] WARNING: CPU: 0 PID: 11557 at fs/btrfs/transaction.c:383 start_transaction+0x561/0x580 [btrfs]() [ 7411.127079] CPU: 0 PID: 11557 Comm: kworker/u8:9 Tainted: G O 3.13.0+ #4 [ 7411.127080] Hardware name: LENOVO QiTianM4350/ , BIOS F1KT52AUS 05/24/2013 [ 7411.127085] Workqueue: writeback bdi_writeback_workfn (flush-btrfs-5) [ 7411.127092] Call Trace: [ 7411.127097] [<ffffffff815b87b0>] dump_stack+0x45/0x56 [ 7411.127101] [<ffffffff81051ffd>] warn_slowpath_common+0x7d/0xa0 [ 7411.127102] [<ffffffff810520da>] warn_slowpath_null+0x1a/0x20 [ 7411.127109] [<ffffffffa0444fb1>] start_transaction+0x561/0x580 [btrfs] [ 7411.127115] [<ffffffffa0445027>] btrfs_join_transaction+0x17/0x20 [btrfs] [ 7411.127120] [<ffffffffa0431c91>] find_free_extent+0xa21/0xb50 [btrfs] [ 7411.127126] [<ffffffffa0431f68>] btrfs_reserve_extent+0xa8/0x1a0 [btrfs] [ 7411.127131] [<ffffffffa04322ce>] btrfs_alloc_free_block+0xee/0x440 [btrfs] [ 7411.127137] [<ffffffffa043bd6e>] ? btree_set_page_dirty+0xe/0x10 [btrfs] [ 7411.127142] [<ffffffffa041da51>] __btrfs_cow_block+0x121/0x530 [btrfs] [ 7411.127146] [<ffffffffa041dfff>] btrfs_cow_block+0x11f/0x1c0 [btrfs] [ 7411.127151] [<ffffffffa0421b74>] btrfs_search_slot+0x1d4/0x9c0 [btrfs] [ 7411.127157] [<ffffffffa0438567>] btrfs_lookup_file_extent+0x37/0x40 [btrfs] [ 7411.127163] [<ffffffffa0456bfc>] __btrfs_drop_extents+0x16c/0xd90 [btrfs] [ 7411.127169] [<ffffffffa0444ae3>] ? start_transaction+0x93/0x580 [btrfs] [ 7411.127171] [<ffffffff811663e2>] ? kmem_cache_alloc+0x132/0x140 [ 7411.127176] [<ffffffffa041cd9a>] ? btrfs_alloc_path+0x1a/0x20 [btrfs] [ 7411.127182] [<ffffffffa044aa61>] cow_file_range_inline+0x181/0x2e0 [btrfs] [ 7411.127187] [<ffffffffa044aead>] cow_file_range+0x2ed/0x440 [btrfs] [ 7411.127194] [<ffffffffa0464d7f>] ? free_extent_buffer+0x4f/0xb0 [btrfs] [ 7411.127200] [<ffffffffa044b38f>] run_delalloc_nocow+0x38f/0xa60 [btrfs] [ 7411.127207] [<ffffffffa0461600>] ? test_range_bit+0x30/0x180 [btrfs] [ 7411.127212] [<ffffffffa044bd48>] run_delalloc_range+0x2e8/0x350 [btrfs] [ 7411.127219] [<ffffffffa04618f9>] ? find_lock_delalloc_range+0x1a9/0x1e0 [btrfs] [ 7411.127222] [<ffffffff812a1e71>] ? blk_queue_bio+0x2c1/0x330 [ 7411.127228] [<ffffffffa0462ad4>] __extent_writepage+0x2f4/0x760 [btrfs] Here we fix it by avoiding joining transaction again if we have held a transaction handle when allocating chunk in find_free_extent(). Signed-off-by: -
Miao Xie authored
Signed-off-by:
Miao Xie <miaox@cn.fujitsu.com> Signed-off-by:
-
Filipe Manana authored
To ease finding bugs during development related to modifying btree leaves in such a way that it makes its items not sorted by key anymore. Since this is an expensive check, it's only enabled if CONFIG_BTRFS_FS_CHECK_INTEGRITY is set, which isn't meant to be enabled for regular users. Signed-off-by:
Filipe David Borba Manana <fdmanana@gmail.com> Reviewed-by:
-
Filipe Manana authored
When the csum tree is empty, our leaf (path->nodes[0]) has a number of items equal to 0 and since btrfs_header_nritems() returns an unsigned integer (and so is our local nritems variable) the following comparison always evaluates to false: if (path->slots[0] >= nritems - 1) { As the casting rules lead to: if ((u32)0 >= (u32)4294967295) { This makes us access key at slot paths->slots[0] + 1 (1) of the empty leaf some lines below: btrfs_item_key_to_cpu(path->nodes[0], &found_key, slot); if (found_key.objectid != BTRFS_EXTENT_CSUM_OBJECTID || found_key.type != BTRFS_EXTENT_CSUM_KEY) { found_next = 1; goto insert; } So just don't access such non-existent slot and don't set found_next to 1 when the tree is empty. It's very unlikely we'll get a random key with the objectid and type values above, which is where we could go into trouble. If nritems is 0, just set found_next to 1 anyway as it will make us insert a csum item covering our whole extent (or the whole leaf) when the tree is empty. Signed-off-by: -
Wang Shilong authored
In close_ctree(), after we have stopped all workers,there maybe still some read requests(for example readahead) to submit and this *maybe* trigger an oops that user reported before: kernel BUG at fs/btrfs/async-thread.c:619! By hacking codes, i can reproduce this problem with one cpu available. We fix this potential problem by invalidating all btree inode pages before stopping all workers. Thanks to Miao for pointing out this problem. Signed-off-by:
-
Tsutomu Itoh authored
In btrfs_create_tree(), if btrfs_insert_root() fails, we should free root->commit_root. Reported-by:
Alex Lyakas <alex@zadarastorage.com> Signed-off-by:
Tsutomu Itoh <t-itoh@jp.fujitsu.com> Signed-off-by:
-
ZhangZhen authored
posix_acl_xattr_set() already does the check, and it's the only way to feed in an ACL from userspace. So the check here is useless, remove it. Signed-off-by:
-
Anand Jain authored
This fix will ensure all SB copies on the disk is zeroed when the disk is intentionally removed. This helps to better manage disks in the user land. This version of patch also merges the Zach patch as below. btrfs: don't double brelse on device rm Signed-off-by:
Zach Brown <zab@redhat.com> Signed-off-by:
-
Miao Xie authored
Signed-off-by:
-
Filipe Manana authored
This is a continuation of the previous changes titled: Btrfs: fix incremental send's decision to delay a dir move/rename Btrfs: part 2, fix incremental send's decision to delay a dir move/rename There's a few more cases where a directory rename/move must be delayed which was previously overlooked. If our immediate ancestor has a lower inode number than ours and it doesn't have a delayed rename/move operation associated to it, it doesn't mean there isn't any non-direct ancestor of our current inode that needs to be renamed/moved before our current inode (i.e. with a higher inode number than ours). So we can't stop the search if our immediate ancestor has a lower inode number than ours, we need to navigate the directory hierarchy upwards until we hit the root or: 1) find an ancestor with an higher inode number that was renamed/moved in the send root too (or already has a pending rename/move registered); 2) find an ancestor that is a new directory (higher inode number than ours and exists only in the send root). Reproducer for case 1) $ mkfs.btrfs -f /dev/sdd $ mount /dev/sdd /mnt $ mkdir -p /mnt/a/b $ mkdir -p /mnt/a/c/d $ mkdir /mnt/a/b/e $ mkdir /mnt/a/c/d/f $ mv /mnt/a/b /mnt/a/c/d/2b $ mkdir /mnt/a/x $ mkdir /mnt/a/y $ btrfs subvolume snapshot -r /mnt /mnt/snap1 $ btrfs send /mnt/snap1 -f /tmp/base.send $ mv /mnt/a/x /mnt/a/y $ mv /mnt/a/c/d/2b/e /mnt/a/c/d/2b/2e $ mv /mnt/a/c/d /mnt/a/h/2d $ mv /mnt/a/c /mnt/a/h/2d/2b/2c $ btrfs subvolume snapshot -r /mnt /mnt/snap2 $ btrfs send -p /mnt/snap1 /mnt/snap2 -f /tmp/incremental.send Simple reproducer for case 2) $ mkfs.btrfs -f /dev/sdd $ mount /dev/sdd /mnt $ mkdir -p /mnt/a/b $ mkdir /mnt/a/c $ mv /mnt/a/b /mnt/a/c/b2 $ mkdir /mnt/a/e $ btrfs subvolume snapshot -r /mnt /mnt/snap1 $ btrfs send /mnt/snap1 -f /tmp/base.send $ mv /mnt/a/c/b2 /mnt/a/e/b3 $ mkdir /mnt/a/e/b3/f $ mkdir /mnt/a/h $ mv /mnt/a/c /mnt/a/e/b3/f/c2 $ mv /mnt/a/e /mnt/a/h/e2 $ btrfs subvolume snapshot -r /mnt /mnt/snap2 $ btrfs send -p /mnt/snap1 /mnt/snap2 -f /tmp/incremental.send Another simple reproducer for case 2) $ mkfs.btrfs -f /dev/sdd $ mount /dev/sdd /mnt $ mkdir -p /mnt/a/b $ mkdir /mnt/a/c $ mkdir /mnt/a/b/d $ mkdir /mnt/a/c/e $ btrfs subvolume snapshot -r /mnt /mnt/snap1 $ btrfs send /mnt/snap1 -f /tmp/base.send $ mkdir /mnt/a/b/d/f $ mkdir /mnt/a/b/g $ mv /mnt/a/c/e /mnt/a/b/g/e2 $ mv /mnt/a/c /mnt/a/b/d/f/c2 $ mv /mnt/a/b/d/f /mnt/a/b/g/e2/f2 $ btrfs subvolume snapshot -r /mnt /mnt/snap2 $ btrfs send -p /mnt/snap1 /mnt/snap2 -f /tmp/incremental.send More complex reproducer for case 2) $ mkfs.btrfs -f /dev/sdd $ mount /dev/sdd /mnt $ mkdir -p /mnt/a/b $ mkdir -p /mnt/a/c/d $ mkdir /mnt/a/b/e $ mkdir /mnt/a/c/d/f $ mv /mnt/a/b /mnt/a/c/d/2b $ mkdir /mnt/a/x $ mkdir /mnt/a/y $ btrfs subvolume snapshot -r /mnt /mnt/snap1 $ btrfs send /mnt/snap1 -f /tmp/base.send $ mv /mnt/a/x /mnt/a/y $ mv /mnt/a/c/d/2b/e /mnt/a/c/d/2b/2e $ mv /mnt/a/c/d /mnt/a/h/2d $ mv /mnt/a/c /mnt/a/h/2d/2b/2c $ btrfs subvolume snapshot -r /mnt /mnt/snap2 $ btrfs send -p /mnt/snap1 /mnt/snap2 -f /tmp/incremental.send For both cases the incremental send would enter an infinite loop when building path strings. While solving these cases, this change also re-implements the code to detect when directory moves/renames should be delayed. Instead of dealing with several specific cases separately, it's now more generic handling all cases with a simple detection algorithm and if when applying a delayed move/rename there's a path loop detected, it further delays the move/rename registering a new ancestor inode as the dependency inode (so our rename happens after that ancestor is renamed). Tests for these cases is being added to xfstests too. Signed-off-by: -
Filipe Manana authored
Signed-off-by:
-
Filipe Manana authored
If we have directories with a pending move/rename operation, we must take into account any orphan directories that got created before executing the pending move/rename. Those orphan directories are directories with an inode number higher then the current send progress and that don't exist in the parent snapshot, they are created before current progress reaches their inode number, with a generated name of the form oN-M-I and at the root of the filesystem tree, and later when progress matches their inode number, moved/renamed to their final location. Reproducer: $ mkfs.btrfs -f /dev/sdd $ mount /dev/sdd /mnt $ mkdir -p /mnt/a/b/c/d $ mkdir /mnt/a/b/e $ mv /mnt/a/b/c /mnt/a/b/e/CC $ mkdir /mnt/a/b/e/CC/d/f $ mkdir /mnt/a/g $ btrfs subvolume snapshot -r /mnt /mnt/snap1 $ btrfs send /mnt/snap1 -f /tmp/base.send $ mkdir /mnt/a/g/h $ mv /mnt/a/b/e /mnt/a/g/h/EE $ mv /mnt/a/g/h/EE/CC/d /mnt/a/g/h/EE/DD $ btrfs subvolume snapshot -r /mnt /mnt/snap2 $ btrfs send -p /mnt/snap1 /mnt/snap2 -f /tmp/incremental.send The second receive command failed with the following error: ERROR: rename a/b/e/CC/d -> o264-7-0/EE/DD failed. No such file or directory A test case for xfstests follows soon. Signed-off-by: -
Filipe Manana authored
Regardless of whether the caller is interested or not in knowing the inode's generation (dir_gen != NULL), get_first_ref always does a btree lookup to get the inode item. Avoid this useless lookup if dir_gen parameter is NULL (which is in some cases). Signed-off-by:
-
Gui Hecheng authored
For RAID0,5,6,10, For system chunk, there shouldn't be too many stripes to make a btrfs_chunk that exceeds BTRFS_SYSTEM_CHUNK_ARRAY_SIZE For data/meta chunk, there shouldn't be too many stripes to make a btrfs_chunk that exceeds a leaf. Signed-off-by:
Gui Hecheng <guihc.fnst@cn.fujitsu.com> Signed-off-by:
-
Gui Hecheng authored
For system chunk array, We copy a "disk_key" and an chunk item each time, so there should be enough space to hold both of them, not only the chunk item. Signed-off-by:
-
Qu Wenruo authored
Current btrfs_orphan_cleanup will also cleanup roots which is already in fs_info->dead_roots without protection. This will have conditional race with fs_info->cleaner_kthread. This patch will use refs in root->root_item to detect roots in dead_roots and avoid conflicts. Signed-off-by:
Qu Wenruo <quwenruo@cn.fujitsu.com> Signed-off-by:
-
Miao Xie authored
Before applying this patch, the task had to reclaim the metadata space by itself if the metadata space was not enough. And When the task started the space reclamation, all the other tasks which wanted to reserve the metadata space were blocked. At some cases, they would be blocked for a long time, it made the performance fluctuate wildly. So we introduce the background metadata space reclamation, when the space is about to be exhausted, we insert a reclaim work into the workqueue, the worker of the workqueue helps us to reclaim the reserved space at the background. By this way, the tasks needn't reclaim the space by themselves at most cases, and even if the tasks have to reclaim the space or are blocked for the space reclamation, they will get enough space more quickly. Here is my test result(Tested by compilebench): Memory: 2GB CPU: 2Cores * 1CPU Partition: 40GB(SSD) Test command: # compilebench -D <mnt> -m Without this patch: intial create total runs 30 avg 54.36 MB/s (user 0.52s sys 2.44s) compile total runs 30 avg 123.72 MB/s (user 0.13s sys 1.17s) read compiled tree total runs 3 avg 81.15 MB/s (user 0.74s sys 4.89s) delete compiled tree total runs 30 avg 5.32 seconds (user 0.35s sys 4.37s) With this patch: intial create total runs 30 avg 59.80 MB/s (user 0.52s sys 2.53s) compile total runs 30 avg 151.44 MB/s (user 0.13s sys 1.11s) read compiled tree total runs 3 avg 83.25 MB/s (user 0.76s sys 4.91s) delete compiled tree total runs 30 avg 5.29 seconds (user 0.34s sys 4.34s) Signed-off-by:
-
Miao Xie authored
If we fail to load a free space cache, we can rebuild it from the extent tree, so it is not a serious error, we should not output a error message that would make the users uncomfortable. This patch uses warning message instead of it. Signed-off-by:
-
Qu Wenruo authored
Btrfs will send uevent to udev inform the device change, but ctime/mtime for the block device inode is not udpated, which cause libblkid used by btrfs-progs unable to detect device change and use old cache, causing 'btrfs dev scan; btrfs dev rmove; btrfs dev scan' give an error message. Reported-by:
-
David Sterba authored
CC: Miao Xie <miaox@cn.fujitsu.com> CC: Wang Shilong <wangsl.fnst@cn.fujitsu.com> Signed-off-by:
-
David Sterba authored
The patch "Btrfs: fix protection between send and root deletion" (18f687d5) does not actually prevent to delete the snapshot and just takes care during background cleaning, but this seems rather user unfriendly, this patch implements the idea presented in http://www.spinics.net/lists/linux-btrfs/msg30813.html - add an internal root_item flag to denote a dead root - check if the send_in_progress is set and refuse to delete, otherwise set the flag and proceed - check the flag in send similar to the btrfs_root_readonly checks, for all involved roots The root lookup in send via btrfs_read_fs_root_no_name will check if the root is really dead or not. If it is, ENOENT, aborted send. If it's alive, it's protected by send_in_progress, send can continue. CC: Miao Xie <miaox@cn.fujitsu.com> CC: Wang Shilong <wangsl.fnst@cn.fujitsu.com> Signed-off-by:
-
Daeseok Youn authored
It doesn't need to check NULL for kfree() Signed-off-by:
Daeseok Youn <daeseok.youn@gmail.com> Signed-off-by:
-
Filipe Manana authored
This implements the tmpfile callback of struct inode_operations, introduced in the linux kernel 3.11, and implemented already by some filesystems. This callback is invoked by the VFS when the flag O_TMPFILE is passed to the open system call. Signed-off-by:
-
David Sterba authored
This ioctl provides basic info about the filesystem that can be obtained in other ways (eg. sysfs), there's no reason to restrict it to CAP_SYSADMIN. Signed-off-by:
-
David Sterba authored
This ioctl provides basic info about the devices that can be obtained in other ways (eg. sysfs), there's no reason to restrict it to CAP_SYSADMIN. Signed-off-by:
-
David Sterba authored
Similar to the FS_INFO updates, export the basic filesystem info through sysfs: node size, sector size and clone alignment. Signed-off-by:
-
David Sterba authored
Provide the basic information about filesystem through the ioctl: * b-tree node size (same as leaf size) * sector size * expected alignment of CLONE_RANGE and EXTENT_SAME ioctl arguments Backward compatibility: if the values are 0, kernel does not provide this information, the applications should ignore them. Signed-off-by:
-
David Sterba authored
This started as debugging helper, to watch the effects of converting between raid levels on multiple devices, but could be useful standalone. In my case the usage filter was not finegrained enough and led to converting too many chunks at once. Another example use is in connection with drange+devid or vrange filters that allow to work with a specific chunk or even with a chunk on a given device. The limit filter applies last, the value of 0 means no limiting. CC: Ilya Dryomov <idryomov@gmail.com> CC: Hugo Mills <hugo@carfax.org.uk> Signed-off-by:
-
