- 12 Jan, 2011 40 commits
-
-
Xiao Guangrong authored
Remove the declaration of kvm_mmu_set_base_ptes() Signed-off-by:
Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by:
Avi Kivity <avi@redhat.com>
-
Jan Kiszka authored
Signed-off-by:
Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by:
-
Avi Kivity authored
While not mandated by the spec, Linux relies on NMI being blocked by an IF-enabling STI. VMX also refuses to enter a guest in this state, at least on some implementations. Disallow NMI while blocked by STI by checking for the condition, and requesting an interrupt window exit if it occurs. Signed-off-by:
Marcelo Tosatti <mtosatti@redhat.com>
-
Xiao Guangrong authored
In kvm_async_pf_wakeup_all(), we add a dummy apf to vcpu->async_pf.done without holding vcpu->async_pf.lock, it will break if we are handling apfs at this time. Also use 'list_empty_careful()' instead of 'list_empty()' Signed-off-by:
Gleb Natapov <gleb@redhat.com> Signed-off-by:
-
Xiao Guangrong authored
If it's no need to inject async #PF to PV guest we can handle more completed apfs at one time, so we can retry guest #PF as early as possible Signed-off-by:
-
Xiao Guangrong authored
In current code, it checks async pf completion out of the wait context, like this: if (vcpu->arch.mp_state == KVM_MP_STATE_RUNNABLE && !vcpu->arch.apf.halted) r = vcpu_enter_guest(vcpu); else { ...... kvm_vcpu_block(vcpu) ^- waiting until 'async_pf.done' is not empty } kvm_check_async_pf_completion(vcpu) ^- delete list from async_pf.done So, if we check aysnc pf completion first, it can be blocked at kvm_vcpu_block Fixed by mark the vcpu is unhalted in kvm_check_async_pf_completion() path Signed-off-by: -
Xiao Guangrong authored
Don't search later slots if the slot is empty Acked-by:
-
Xiao Guangrong authored
Use 'DECLARE_EVENT_CLASS' to cleanup async_pf tracepoints Acked-by:
-
Xiao Guangrong authored
Tracing 'async' and *pfn is useless, since 'async' is always true, and '*pfn' is always "fault_pfn' We can trace 'gva' and 'gfn' instead, it can help us to see the life-cycle of an async_pf Signed-off-by:
-
Takuya Yoshikawa authored
Let's use newly introduced vzalloc(). Signed-off-by:
Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp> Signed-off-by:
Jesper Juhl <jj@chaosbits.net> Signed-off-by:
-
Gleb Natapov authored
Currently the exit is unhandled, so guest halts with error if it tries to execute INVD instruction. Call into emulator when INVD instruction is executed by a guest instead. This instruction is not needed by ordinary guests, but firmware (like OpenBIOS) use it and fail. Signed-off-by:
-
Jan Kiszka authored
Micro optimization to avoid calling wbinvd twice on the CPU that has to emulate it. As we might be preempted between smp_call_function_many and the local wbinvd, the cache might be filled again so that real work could be done uselessly. Signed-off-by:
-
Heiko Carstens authored
Fixes this: CC arch/s390/kvm/../../../virt/kvm/kvm_main.o arch/s390/kvm/../../../virt/kvm/kvm_main.c: In function 'kvm_dev_ioctl_create_vm': arch/s390/kvm/../../../virt/kvm/kvm_main.c:1828:10: warning: unused variable 'r' Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
-
Heiko Carstens authored
Fixes this: CC arch/s390/kvm/../../../virt/kvm/kvm_main.o arch/s390/kvm/../../../virt/kvm/kvm_main.c: In function 'kvm_clear_guest_page': arch/s390/kvm/../../../virt/kvm/kvm_main.c:1224:2: warning: passing argument 3 of 'kvm_write_guest_page' makes pointer from integer without a cast arch/s390/kvm/../../../virt/kvm/kvm_main.c:1185:5: note: expected 'const void *' but argument is of type 'long unsigned int' Signed-off-by:
-
Takuya Yoshikawa authored
Currently we are using vmalloc() for all dirty bitmaps even if they are small enough, say less than K bytes. We use kmalloc() if dirty bitmap size is less than or equal to PAGE_SIZE so that we can avoid vmalloc area usage for VGA. This will also make the logging start/stop faster. Signed-off-by:
-
Takuya Yoshikawa authored
Currently x86's kvm_vm_ioctl_get_dirty_log() needs to allocate a bitmap by vmalloc() which will be used in the next logging and this has been causing bad effect to VGA and live-migration: vmalloc() consumes extra systime, triggers tlb flush, etc. This patch resolves this issue by pre-allocating one more bitmap and switching between two bitmaps during dirty logging. Performance improvement: I measured performance for the case of VGA update by trace-cmd. The result was 1.5 times faster than the original one. In the case of live migration, the improvement ratio depends on the workload and the guest memory size. In general, the larger the memory size is the more benefits we get. Note: This does not change other architectures's logic but the allocation size becomes twice. This will increase the actual memory consumption only when the new size changes the number of pages allocated by vmalloc(). Signed-off-by:
Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp> Signed-off-by:
-
Takuya Yoshikawa authored
This makes it easy to change the way of allocating/freeing dirty bitmaps. Signed-off-by:
-
Gleb Natapov authored
Add tracepoint for userspace exit. Signed-off-by:
-
Marcelo Tosatti authored
As suggested by Andrea, pass r/w error code to gup(), upgrading read fault to writable if host pte allows it. Signed-off-by:
-
Marcelo Tosatti authored
This can happen in the following scenario: vcpu0 vcpu1 read fault gup(.write=0) gup(.write=1) reuse swap cache, no COW set writable spte use writable spte set read-only spte Signed-off-by:
-
Marcelo Tosatti authored
Unused. Signed-off-by:
-
Marcelo Tosatti authored
The EPT present/writable bits use the same position as normal pagetable bits. Since direct_map passes ACC_ALL to mmu_set_spte, thus always setting the writable bit on sptes, use the generic PT_PRESENT shadow_base_pte. Also pass present/writable error code information from EPT violation to generic pagefault handler. Signed-off-by:
-
Avi Kivity authored
After an interrupt injection, the PPR changes, and we have to reflect that into the vapic. This causes a KVM_REQ_EVENT to be set, which causes the whole interrupt injection routine to be run again (harmlessly). Optimize by only setting KVM_REQ_EVENT if the ppr was lowered; otherwise there is no chance that a new injection is needed. Signed-off-by: -
Avi Kivity authored
This abstraction only serves to obfuscate. Remove. Signed-off-by:
-
Avi Kivity authored
ldt is never used in the kernel context; same goes for fs (x86_64) and gs (i386). So save/restore them in the heavyweight exit path instead of the lightweight path. By itself, this doesn't buy us much, but it paves the way for moving vmload and vmsave to the heavyweight exit path, since they modify the same registers. [jan: fix copy/pase mistake on i386] Signed-off-by:
-
Avi Kivity authored
More members will join it soon. Signed-off-by:
-
Avi Kivity authored
Saving guest registers is just a memory copy, and does not need to be in the critical section. Move outside the critical section to improve latency a bit. Signed-off-by:
-
Jan Kiszka authored
May otherwise generates build warnings about unused kvm_read_and_reset_pf_reason if included without CONFIG_KVM_GUEST enabled. Signed-off-by:
-
Andi Kleen authored
gcc 4.5 with some special options is able to duplicate the VMX context switch asm in vmx_vcpu_run(). This results in a compile error because the inline asm sequence uses an on local label. The non local label is needed because other code wants to set up the return address. This patch moves the asm code into an own function and marks that explicitely noinline to avoid this problem. Better would be probably to just move it into an .S file. The diff looks worse than the change really is, it's all just code movement and no logic change. Signed-off-by:
Andi Kleen <ak@linux.intel.com> Signed-off-by:
-
Jan Kiszka authored
It has no user outside mmu.c and also no prototype. Signed-off-by:
-
Gleb Natapov authored
Improve vma handling code readability in hva_to_pfn() and fix async pf handling code to properly check vma returned by find_vma(). Signed-off-by:
-
Gleb Natapov authored
If guest indicates that it can handle async pf in kernel mode too send it, but only if interrupts are enabled. Acked-by:
Rik van Riel <riel@redhat.com> Signed-off-by:
-
Gleb Natapov authored
If guest can detect that it runs in non-preemptable context it can handle async PFs at any time, so let host know that it can send async PF even if guest cpu is not in userspace. Acked-by:
-
Gleb Natapov authored
If async page fault is received by idle task or when preemp_count is not zero guest cannot reschedule, so do sti; hlt and wait for page to be ready. vcpu can still process interrupts while it waits for the page to be ready. Acked-by:
-
Gleb Natapov authored
Send async page fault to a PV guest if it accesses swapped out memory. Guest will choose another task to run upon receiving the fault. Allow async page fault injection only when guest is in user mode since otherwise guest may be in non-sleepable context and will not be able to reschedule. Vcpu will be halted if guest will fault on the same page again or if vcpu executes kernel code. Acked-by:
-
Gleb Natapov authored
When async PF capability is detected hook up special page fault handler that will handle async page fault events and bypass other page faults to regular page fault handler. Also add async PF handling to nested SVM emulation. Async PF always generates exit to L1 where vcpu thread will be scheduled out until page is available. Acked-by:
-
Gleb Natapov authored
Enable async PF in a guest if async PF capability is discovered. Acked-by:
-
Gleb Natapov authored
Guest enables async PF vcpu functionality using this MSR. Reviewed-by:
-
Gleb Natapov authored
Async PF also needs to hook into smp_prepare_boot_cpu so move the hook into generic code. Acked-by:
-
Gleb Natapov authored
Keep track of memslots changes by keeping generation number in memslots structure. Provide kvm_write_guest_cached() function that skips gfn_to_hva() translation if memslots was not changed since previous invocation. Acked-by:
-
