- 06 Jul, 2015 40 commits
-
-
Mauro Carvalho Chehab authored
drivers/media/platform/sh_vou.c:799:5: warning: no previous prototype for 'sh_vou_g_output' [-Wmissing-prototypes] int sh_vou_g_output(struct file *file, void *fh, unsigned int *i) ^ drivers/media/platform/sh_vou.c:805:5: warning: no previous prototype for 'sh_vou_s_output' [-Wmissing-prototypes] int sh_vou_s_output(struct file *file, void *fh, unsigned int i) ^ Signed-off-by:Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Ian Molton authored
Adds support to the adv7604 driver for specifying the default input port in the Device tree. If no value is provided, the driver will be unable to select an input without help from userspace. Tested-by:
William Towle <william.towle@codethink.co.uk> Signed-off-by:
Ian Molton <ian.molton@codethink.co.uk> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Ian Molton authored
This documentation accompanies the patch adding support for the ADV7612 dual HDMI decoder / repeater chip. Signed-off-by:
-
William Towle authored
Add support for the ADV7612 chip as implemented on Renesas' Lager board to adv7604.c, including lists for formats/colourspace/timing selection and an IRQ handler. Signed-off-by:
-
Pablo Anton authored
This is a preliminary patch in order to add support for ALSA. It replaces all current i2c access with regmap. Signed-off-by:
Pablo Anton <pablo.anton@veo-labs.com> Signed-off-by:
Jean-Michel Hautbois <jean-michel.hautbois@veo-labs.com> Signed-off-by:
-
Ben Dooks authored
Add a proper of match id for use when the device is being bound via device tree, to avoid having to use the i2c old-style binding of the device. Signed-off-by:
Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by:
Rob Taylor <rob.taylor@codethink.co.uk> Signed-off-by:
-
Hans Verkuil authored
The VIDIOC_EXPBUF documentation had spurious spaces that made it irritating to read. Fix this. Signed-off-by:
-
Ricardo Ribalda authored
They are no longer used in old non-control-framework bridge drivers. Reported-by:
Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Acked-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
-
Hans Verkuil authored
Dump the VOU registers in log_status. Signed-off-by:
-
Hans Verkuil authored
This converts this driver to videobuf2. As usual it is a big and hard to review patch, but this is always a big-bang change. It has been tested with my Renesas board. Signed-off-by:
-
Hans Verkuil authored
The bytesperline values were wrong for planar formats where bytesperline is the line length for the first plane. Signed-off-by:
-
Hans Verkuil authored
This ensures that both do the same checks, and simplifies s_fmt_vid_out a bit. Signed-off-by:
-
Hans Verkuil authored
Implement g/s_selection. The v4l2 core will emulate g/s_crop and cropcap on top of g/s_selection. Signed-off-by:
-
Hans Verkuil authored
It was set to a format that wasn't supported. Signed-off-by:
-
Hans Verkuil authored
Video output drivers must support these ioctls. Otherwise applications cannot deduce that these outputs exist and what capabilities they have. Signed-off-by:
-
Hans Verkuil authored
This allows us to drop the use_count and you get free G/S_PRIORITY support. Signed-off-by:
-
Hans Verkuil authored
Fix v4l2-compliance errors due to empty driver and bus_info fields. Signed-off-by:
-
Hans Verkuil authored
Simplify the sh-vou clean up by using devm_* were possible. Signed-off-by:
-
Mauro Carvalho Chehab authored
drivers/media/platform/vsp1/vsp1_video.c:517:6: warning: no previous prototype for 'vsp1_pipeline_stopped' [-Wmissing-prototypes] bool vsp1_pipeline_stopped(struct vsp1_pipeline *pipe) ^ Signed-off-by: -
Hans Verkuil authored
Bitrot has set in for this driver and the sh-vou clock was never enabled, since the clock name in clock-sh7724.c was wrong. It should be sh-vou, not sh-vou.0. Signed-off-by:
-
Damian Hobson-Garcia authored
Make sure that there are valid values in the crop rectangle to ensure that the color plane doesn't get shifted when cropping. Since there is no distinction between 12bit and 16bit YUV formats in at the subdev level, use the more restrictive 12bit limits for all YUV formats. Signed-off-by:
Damian Hobson-Garcia <dhobsong@igel.co.jp> Signed-off-by:
Yoshihiro Kaneko <ykaneko0929@gmail.com> Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by:
-
Laurent Pinchart authored
When stopping the pipeline the driver waits for the pipeline state to be set to VSP1_PIPELINE_STOPPED but fails to lock the pipe irqlock to read the state variable protected by the lock. Fix it. Signed-off-by:
-
Sei Fumizono authored
Fix Suspend-to-RAM so that VSP1 driver continues to work after resuming. In detail, - Fix the judgment of ref count in resuming. - Add stopping VSP1 during suspend. [Refactor the suspend and resume code to lower suspend delay] Signed-off-by:
Sei Fumizono <sei.fumizono.jw@hitachi-solutions.com> Signed-off-by:
Yoshifumi Hosoya <yoshifumi.hosoya.wj@renesas.com> Signed-off-by:
-
Nobuhiro Iwamatsu authored
FXA bit of VI6_DPR_mod_ROUTE register starts from 16bit. But VI6_DPR_ROUTE_FXA_MASK is set to become start from 8bit. This fixes shift size for VI6_DPR_ROUTE_FXA_MASK. Signed-off-by:
Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by:
-
Nobuhiro Iwamatsu authored
FP bit of VI6_DPR_mod_ROUTE register is 6bit. But VI6_DPR_ROUTE_FP_MASK is set to 0xFF, this will mask until the reserve bit. This fixes size for VI6_DPR_ROUTE_FP_MASK. Signed-off-by:
-
Nobuhiro Iwamatsu authored
Clipping size bit of VI6_WPFn _HSZCLIP and VI6_WPFn _VSZCLIP register are from 0 bit to 11 bit. But VI6_WPF_SZCLIP_SIZE_MASK is set to 0x1FFF, this will mask until the reserve bits. This fixes size for VI6_WPF_SZCLIP_SIZE_MASK. Signed-off-by:
-
Nicholas Mc Guire authored
API compliance scanning with coccinelle flagged: ./drivers/media/usb/gspca/m5602/m5602_s5k83a.c:180:9-25: WARNING: timeout (100) seems HZ dependent Numeric constants passed to schedule_timeout() make the effective timeout HZ dependent which makes little sense in a polling loop for the cameras rotation state. Fixed up by converting the constant to jiffies with msecs_to_jiffies() Signed-off-by:
Nicholas Mc Guire <hofrat@osadl.org> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Dan Carpenter authored
We already know status is negative because of the earlier check so there is no need to check again. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Ricardo Ribalda authored
They are no longer used in old non-control-framework bridge drivers. Reported-by:
-
Ricardo Ribalda authored
They are no longer used in old non-control-framework bridge drivers. Reported-by:
-
Ricardo Ribalda authored
They are no longer used in old non-control-framework bridge drivers. Reported-by:
-
Ricardo Ribalda authored
They are no longer used in old non-control-framework bridge drivers. Reported-by:
-
Ricardo Ribalda authored
They are no longer used in old non-control-framework bridge drivers. Reported-by:
-
Ricardo Ribalda authored
They are no longer used in old non-control-framework bridge drivers. Reported-by:
-
Ricardo Ribalda authored
They are no longer used in old non-control-framework bridge drivers. Reported-by:
-
Ricardo Ribalda authored
They are no longer used in old non-control-framework bridge drivers. Reported-by:
-
Ricardo Ribalda authored
They are no longer used in old non-control-framework bridge drivers. Reported-by:
-
Ricardo Ribalda authored
They are no longer used in old non-control-framework bridge drivers. Reported-by:
-
Ricardo Ribalda authored
They are no longer used in old non-control-framework bridge drivers. Reported-by:
-
Prashant Laddha authored
In many cases, refresh rate is not exact integer. In such cases, fraction was lost and it used to print, say, 59 in case of 59.94. Now, capturing the fraction up to 2 decimal places. Signed-off-by:
Prashant Laddha <prladdha@cisco.com> Signed-off-by:
-
