- 25 Jun, 2013 34 commits
-
-
Vlad Yasevich authored
When the user issues TUNSETOFFLOAD ioctl, macvtap does not do anything other then to verify arguments. This patch adds functionality to allow users to actually control offload features. NETIF_F_GSO and NETIF_F_GRO are always on, but the rest of the features can be controlled. Signed-off-by:
Vlad Yasevich <vyasevic@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vlad Yasevich authored
Currently macvtap uses rcu_bh functions in its user facing fuction macvtap_get_user() and macvtap_put_user(). However, its packet handlers use normal rcu as the rcu_read_lock() is taken in netif_receive_skb(). We can safely discontinue the usage or rcu with bh disabled. Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Vlad Yasevich authored
Macvtap uses a private lock to protect the relationship between macvtap_queue and macvlan_dev. The private lock is not needed since the relationship is managed by user via open(), release(), and dellink() calls. dellink() already happens under rtnl, so we can safely convert open() and release(), and use it in ioctl() as well. Suggested by Eric Dumazet. Signed-off-by:
-
Eliezer Tamir authored
select/poll busy-poll support. Split sysctl value into two separate ones, one for read and one for poll. updated Documentation/sysctl/net.txt Add a new poll flag POLL_LL. When this flag is set, sock_poll will call sk_poll_ll if possible. sock_poll sets this flag in its return value to indicate to select/poll when a socket that can busy poll is found. When poll/select have nothing to report, call the low-level sock_poll again until we are out of time or we find something. Once the system call finds something, it stops setting POLL_LL, so it can return the result to the user ASAP. Signed-off-by:
Eliezer Tamir <eliezer.tamir@linux.intel.com> Signed-off-by:
-
Alexey Brodkin authored
Driver for non-standard on-chip ethernet device ARC EMAC 10/100, instantiated in some legacy ARC (Synopsys) FPGA Boards such as ARCAngel4/ML50x. Signed-off-by:
Alexey Brodkin <abrodkin@synopsys.com> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Francois Romieu <romieu@fr.zoreil.com> Cc: Joe Perches <joe@perches.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Mischa Jonker <mjonker@synopsys.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: linux-kernel@vger.kernel.org Cc: devicetree-discuss@lists.ozlabs.org Cc: Florian Fainelli <florian@openwrt.org> Cc: David Laight <david.laight@aculab.com> Signed-off-by:
-
Daniel Borkmann authored
No need to have an extra ret variable when we directly can return the value of sctp_get_port_local(). Signed-off-by:
Daniel Borkmann <dborkman@redhat.com> Acked-by:
Vlad Yasevich <vyasevich@gmail.com> Signed-off-by:
-
Daniel Borkmann authored
Rather instead of having the endpoint clean the garbage from the socket, use a sk_destruct handler sctp_destruct_sock(), that does the job for that when there are no more references on the socket. At least do this for our crypto transform through crypto_free_hash() that is allocated when in listening state. Also, perform sctp_put_port() only when sk is valid. At a later point in time we can still determine if there's an option of placing this into sk_prot->unhash() or sctp_endpoint_free() without any races. For now, leave it in sctp_endpoint_destroy() though. Signed-off-by:
-
Daniel Borkmann authored
A trailing newline has been forgotten to add into the WARN(). Signed-off-by:
-
Daniel Borkmann authored
Currently, SCTP code defines its own timeval functions (since timeval is rarely used inside the kernel by others), namely tv_lt() and TIMEVAL_ADD() macros, that operate on SCTP cookie expiration. We might as well remove all those, and operate directly on ktime structures for a couple of reasons: ktime is available on all archs; complexity of ktime calculations depending on the arch is less than (reduces to a simple arithmetic operations on archs with BITS_PER_LONG == 64 or CONFIG_KTIME_SCALAR) or equal to timeval functions (other archs); code becomes more readable; macros can be thrown out. Signed-off-by:
-
Daniel Borkmann authored
Add two ktime helper functions that i) convert a given msec value to a ktime structure and ii) that adds a msec value to a ktime structure. Signed-off-by:
-
Daniel Borkmann authored
We do neither ship a test_frame.h, nor will this be compatible with the 2.5 out-of-tree lksctp kernel test suite anyway. So remove this artefact. Signed-off-by:
-
Jack Morgenstein authored
Should not allow negative num_vfs Signed-off-by:
Jack Morgenstein <jackm@dev.mellanox.com> Signed-off-by:
Vladimir Sokolovsky <vlad@mellanox.com> Signed-off-by:
Amir Vadai <amirv@mellanox.com> Signed-off-by:
-
Dotan Barak authored
Warning prints when there are command timeout to help debugging future failures. Signed-off-by:
Dotan Barak <dotanb@dev.mellanox.com> Signed-off-by:
-
Dotan Barak authored
It is not safe to use sscanf. Signed-off-by:
-
Dotan Barak authored
Since this variable is now part of a structure and not allocated dynamically, this test is irrelevant now. Signed-off-by:
-
Yevgeny Petrilin authored
Print a warning when a TX timeout is detected Signed-off-by:
Yevgeny Petrilin <yevgenyp@mellanox.com> Signed-off-by:
Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by:
-
Eugenia Emantayev authored
The RX rings were cleaned while there was still possible RX traffic completion handling. Change the sequance of events so that the port is closed and the QPs are being stopped before RX cleanup. Signed-off-by:
-
Eugenia Emantayev authored
The port vlan table size is 126 (used for IBoE) so after 126 we will not have space and the user need to see it only in debug print and not error. Signed-off-by:
Aviad Yehezkel <aviadye@mellanox.com> Reviewed-by:
-
Eugenia Emantayev authored
To avoid a race between the open function and everything that happens after register_netdev() move it to be the last operation called. Signed-off-by:
-
Jack Morgenstein authored
There are no counters allocated to the eth device when the port is down, so this query is meaningless at that time. It also leads to querying incorrect counters (since the counter_index is not valid when the device port is down). Signed-off-by:
-
Dotan Barak authored
Wrong condition was used when calling iounmap. Signed-off-by:
-
Hannes Frederic Sowa authored
If the tokenized ip address is re-set on an interface we depend on the arrival of a new router advertisment to call addrconf_verify to clean up the old address (which valid_lft is now set to 0). Old addresses can linger around for a longer time if e.g. the source of router advertisments vanishes. So, call addrconf_verify immediately after setting the new tokenized address to get rid of the old tokenized addresses. Cc: Daniel Borkmann <dborkman@redhat.com> Signed-off-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by:
-
Hannes Frederic Sowa authored
The reason behind this change is that as soon as we delete the last ipv6 address of an interface we also lose the /proc/sys/net/ipv6/conf/<interface> directory. This seems to be a usability problem for me. I don't see any reason why we should shutdown ipv6 on that interface in such cases. Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by:
-
Hannes Frederic Sowa authored
This patch splits the timers for duplicate address detection and router solicitations apart. The router solicitations timer goes into inet6_dev and the dad timer stays in inet6_ifaddr. The reason behind this patch is to reduce the number of unneeded router solicitations send out by the host if additional link-local addresses are created. Currently we send out RS for every link-local address on an interface. If the RS timer fires we pick a source address with ipv6_get_lladdr. This change could hurt people adding additional link-local addresses and specifying these addresses in the radvd clients section because we no longer guarantee that we use every ll address as source address in router solicitations. Cc: Flavio Leitner <fleitner@redhat.com> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: David Stevens <dlstevens@us.ibm.com> Signed-off-by:
Flavio Leitner <fbl@redhat.com> Signed-off-by:
-
Eric Dumazet authored
Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/bwh/sfc-nextDavid S. Miller authored
Ben Hutchings says: ==================== 1. Make EEH recovery work when using legacy interrupts, from Alexandre Rames. 2. Enable accelerated RFS for VLAN-tagged flows, from Andy Lutomirski. 3. Improve performance for non-TCP (and particularly UDP) traffic, which regressed in 3.10 when we switched to always allocating paged RX buffers. Partly by Jon Cooper. 4. Some minor bug fixes to IOMMU detection, timestamping capabilities, and IRQ cleanup on the probe failure path. I've dropped the RX skb cache, which improved some benchmarks but perhaps needs some reworking to be more generally useful. ==================== Signed-off-by: -
Sebastian Ott authored
Since commit 82dc3c63 "net: introduce NAPI_POLL_WEIGHT" network drivers receive a warning when they use napi weight higher than NAPI_POLL_WEIGHT. This patch reduces QETH_NAPI_WEIGHT from 128 to 64 (NAPI_POLL_WEIGHT). Signed-off-by:
Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by:
Frank Blaschka <blaschka@linux.vnet.ibm.com> Signed-off-by:
-
Stefan Raspl authored
When the initial MTU size is changed prior to any activity on the device (e.g. by attaching a z/VM vNIC already configured in Linux to a guestLAN), we call dev_kfree_skb_irq(NULL) which results in a kernel panic. Adding a proper check for NULL pointers to address this issue. Signed-off-by:
Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by:
Ursula Braun <braunu@de.ibm.com> Signed-off-by:
-
Ursula Braun authored
blkt settings (or LAN idle settings) for an OSA Express card determine when and how often an OSA Express card tells the operating system about new incoming packets. The semantic of these settings has changed starting with OSA Express3. Currently the qeth standard settings apply to OSA Express2 and older generations of OSA Express cards, while new generations of OSA Express cards require extra coding of their reasonable default. To cover future OSA Express generations the qeth default standard blkt setting is now the desired setting for OSA generations starting with OSA Express3, while the fixed set of older OSA Express cards receives its blkt settings explicitly. Signed-off-by:
Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by:
-
Stefan Raspl authored
Increase the default MTU for real OSA devices in layer 2 mode to 1500 Bytes for increased compatibility. Signed-off-by:
-
Andy Shevchenko authored
If someone is interested to dump something they may consider to use print_hex_dump() or print_hex_dump_bytes() kernel helpers. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Yuval Mintz authored
This patch solves several sparse issues as well as an unneeded semicolon found via coccinelle. Signed-off-by:
Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by:
Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by:
Ariel Elior <ariele@broadcom.com> Signed-off-by:
Eilon Greenstein <eilong@broadcom.com> Signed-off-by:
-
Eric Dumazet authored
commit f88c91dd ("ipv6: statically link register_inet6addr_notifier()" added following sparse warnings : net/ipv6/addrconf_core.c:83:5: warning: symbol 'register_inet6addr_notifier' was not declared. Should it be static? net/ipv6/addrconf_core.c:89:5: warning: symbol 'unregister_inet6addr_notifier' was not declared. Should it be static? net/ipv6/addrconf_core.c:95:5: warning: symbol 'inet6addr_notifier_call_chain' was not declared. Should it be static? Signed-off-by:
-
Eric Dumazet authored
struct tcp_fastopen_context has a field named tfm, which is a pointer to a crypto_cipher structure. It currently has a __rcu annotation, which is not needed at all. tcp_fastopen_ctx is the pointer fetched by rcu_dereference(), but once we have a pointer to current tcp_fastopen_context, we do not use/need rcu_dereference() to access tfm. This fixes a lot of sparse errors like the following : net/ipv4/tcp_fastopen.c:21:31: warning: incorrect type in argument 1 (different address spaces) net/ipv4/tcp_fastopen.c:21:31: expected struct crypto_cipher *tfm net/ipv4/tcp_fastopen.c:21:31: got struct crypto_cipher [noderef] <asn:4>*tfm Signed-off-by:
-
- 24 Jun, 2013 6 commits
-
-
Daniel Borkmann authored
Currently, there is no good possibility to debug netlink traffic that is being exchanged between kernel and user space. Therefore, this patch implements a netlink virtual device, so that netlink messages will be made visible to PF_PACKET sockets. Once there was an approach with a similar idea [1], but it got forgotten somehow. I think it makes most sense to accept the "overhead" of an extra netlink net device over implementing the same functionality from PF_PACKET sockets once again into netlink sockets. We have BPF filters that can already be easily applied which even have netlink extensions, we have RX_RING zero-copy between kernel- and user space that can be reused, and much more features. So instead of re-implementing all of this, we simply pass the skb to a given PF_PACKET socket for further analysis. Another nice benefit that comes from that is that no code needs to be changed in user space packet analyzers (maybe adding a dissector, but not more), thus out of the box, we can already capture pcap files of netlink traffic to debug/troubleshoot netlink problems. Also thanks goes to Thomas Graf, Flavio Leitner, Jesper Dangaard Brouer. [1] http://marc.info/?l=linux-netdev&m=113813401516110Signed-off-by:
-
Daniel Borkmann authored
Similarly to the networking receive path with ptype_all taps, we add the possibility to register netdevices that are for ARPHRD_NETLINK to the netlink subsystem, so that those can be used for netlink analyzers resp. debuggers. We do not offer a direct callback function as out-of-tree modules could do crap with it. Instead, a netdevice must be registered properly and only receives a clone, managed by the netlink layer. Symbols are exported as GPL-only. Signed-off-by:
-
Daniel Borkmann authored
This small patch adds the definition of ARPHRD_NETLINK which can for example be used by netlink monitoring devices as device type. So that sockaddr_ll can pick it up and based on that choose the correct packet dissector. Signed-off-by:
-
David S. Miller authored
This restores commits: c573972c 1a590434 da2e2c21 which initially accidently went into 'net', were reverted there, and then properly placed into 'net-next'. But the next net --> net-next merge accidently wiped them out again. Reported-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by:
-
Ben Hutchings authored
The device::iommu_group field may be set even if no IOMMU is in use. iommu_present() is still a better indicator, although it doesn't tell us whether *our* device is affected. Reported-by:
Alex Williamson <alex.williamson@redhat.com> Signed-off-by:
Ben Hutchings <bhutchings@solarflare.com>
-
Ben Hutchings authored
The lifetime of an irq_cpu_rmap is odd: we have to allocate it before installing IRQ handlers and free it before removing the IRQ handlers. As a result of this asymmetry, it was omitted from some failure paths. On another failure path, we could try to remove IRQ handlers we had not yet installed. Move the irq_cpu_rmap allocation and freeing alongside IRQ handler installation and removal, in efx_nic_{init,fini}_interrupts(). Count the number of IRQ handlers successfully installed and only remove those on the failure path. Signed-off-by:
-
