If we have USB gadgets disabled and USB_MUSB_HOST set, we get
errors "possible irq lock inverssion dependency detected"
errors during boot.

Let's fix the issue by adding start_musb flag and start
the controller after we're out of the spinlock protected
section.
Reported-by: Ladislav Michl <ladis@linux-mips.org>
Tested-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'phy-for-4.8-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-linus

Kishon writes:

phy: for 4.8 -rc

*) Fix to get host-only mode working in sun4i
*) Fix a compilation error because of missing header file
*) Other minor fixes
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

Merge tag 'usb-ci-v4.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb into usb-linus

Peter writes:

Fix one bug that host can't work after insmod gadget module
at dual-role mode, the root cause of this issue is the usbcmd.rs
is cleared by chipidea udc code.

Merge tag 'usb-serial-4.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus

Johan writes:

USB-serial fixes for v4.8-rc4

Here are a couple of fixes for non-atomic allocations in write paths,
and some new option device ids.
Signed-off-by: Johan Hovold <johan@kernel.org>

Merge tag 'fixes-for-v4.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus

Felipe writes:

usb: fixes for v4.8-rc3

Few fixes on dwc3 again, the most important being a
fix for pm_runtime to make it work with current
intel platforms.

Other than that, there's a signedness bug fix in fsl
udc and some other minor fixes.

We need to decrement in both cases (enq > deq and
enq < deq)
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

There was a typo when generating endpoint name which
would be very confusing when debugging. Fix it.
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

Always unmap all SG entries as required by DMA API

Fixes: a698908d ("usb: gadget: add generic map/unmap request utilities")
Cc: <stable@vger.kernel.org> # v3.4+
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

These product IDs are listed in Windows driver.
0x6803 corresponds to WeTelecom WM-D300.
0x6802 name is unknown.
Signed-off-by: Aleksandr Makarov <aleksandr.o.makarov@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>

UBSAN complains about a left shift by -1 in proc_do_submiturb().  This
can occur when an URB is submitted for a bulk or control endpoint on
a high-speed device, since the code doesn't bother to check the
endpoint type; normally only interrupt or isochronous endpoints have
a nonzero bInterval value.

Aside from the fact that the operation is illegal, it shouldn't matter
because the result isn't used.  Still, in theory it could cause a
hardware exception or other problem, so we should work around it.
This patch avoids doing the left shift unless the shift amount is >= 0.

The same piece of code has another problem.  When checking the device
speed (the exponential encoding for interrupt endpoints is used only
by high-speed or faster devices), we need to look for speed >=
USB_SPEED_SUPER as well as speed == USB_SPEED HIGH.  The patch adds
this check.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Vittorio Zecca <zeccav@gmail.com>
Tested-by: Vittorio Zecca <zeccav@gmail.com>
Suggested-by: Bjørn Mork <bjorn@mork.no>
CC: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The maximum value allowed for wMaxPacketSize of a high-speed interrupt
endpoint is 1024 bytes, not 1023.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Fixes: aed9d65a ("USB: validate wMaxPacketValue entries in endpoint descriptors")
CC: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When usb gadget is set gadget serial function, it will be crash in below
situation.

It will clean the 'port->port_usb' pointer in gserial_disconnect() function
when usb link is inactive, but it will release lock for disabling the endpoints
in this function. Druing the lock release period, it maybe complete one request
to issue gs_write_complete()--->gs_start_tx() function, but the 'port->port_usb'
pointer had been set NULL, thus it will be crash in gs_start_tx() function.

This patch adds the 'port->port_usb' pointer checking in gs_start_tx() function
to avoid this situation.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

__dwc3_gadget_wakeup() is called while holding a spinlock, then depends on
jiffies in order to timeout while polling the USB core for a link state
update. In the case the wakeup failed, the timeout will never happen and
will also cause the cpu to stall until rcu_preempt kicks in.

This switches to a "decrement variable and wait" timeout scheme.
Signed-off-by: Nicolas Saenz Julienne <nicolassaenzj@gmail.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

We can't assign -EINVAL to a u16.

Fixes: 3948f0e0 ('usb: add Freescale QE/CPM USB peripheral controller driver')
Acked-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

In eth_start_xmit, the socket buffer may be NULL. So, add NULL pointer
check at .wrap API.
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

In eth_start_xmit, the socket buffer may be NULL. So, add NULL pointer
check at .wrap API.
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

In case of error, the function usb_get_phy() returns ERR_PTR() and never
returns NULL. The NULL test in the return value check should be replaced
with IS_ERR().

Fixes: b5a28756 ("usb: renesas_usbhs: Allow an OTG PHY driver to
	provide VBUS")
Cc: <stable@vger.kernel.org> # v4.3+
Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

Allow for platforms that have a reset controller driver in place to bring
the USB IP out of reset.
Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Acked-by: John Youn <johnyoun@synopsys.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

After going through runtime_suspend/runtime_resume
cycle once we would be left with an unbalanced
pm_runtime_get() call. Fix that by making sure that
we try to suspend right after resuming so things are
balanced and device can runtime_suspend again.
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

During runtime_resume of dwc3-pci.c, we need to
runtime suspend our child device (which is dwc3
proper) otherwise nothing will happen.
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

Pull two parisc fixes from Helge Deller:
 "The first patch ensures that the high-res cr16 clocksource (which was
  added in kernel 4.7) gets choosen as default clocksource for parisc.

  The second patch moves the #define of EREFUSED down inside errno.h and
  thus unbreaks building the gccgo compiler"

* 'parisc-4.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Fix order of EREFUSED define in errno.h
  parisc: Fix automatic selection of cr16 clocksource

This is an entirely new driver instead of yet another set of patches
to sb_edac.c because:

1) Mapping from PCI devices to socket/memory controller is significantly
   different. Skylake scatters devices on a socket across a number of
   PCI buses.
2) There is an extra level of interleaving via the "mcroute" register
   that would be a little messy to squeeze into the old driver.
3) Validation is getting too expensive. Changes to sb_edac need to
   be checked against Sandy Bridge, Ivy Bridge, Haswell, Broadwell and
   Knights Landing.
Acked-by: Aristeu Rozanski <aris@redhat.com>
Acked-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Add support for WeTelecom WM-D200.

T:  Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  4 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=22de ProdID=6801 Rev=00.00
S:  Manufacturer=WeTelecom Incorporated
S:  Product=WeTelecom Mobile Products
C:  #Ifs= 4 Cfg#= 1 Atr=80 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I:  If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I:  If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I:  If#= 3 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
Signed-off-by: Aleksandr Makarov <aleksandr.o.makarov@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>

When building gccgo in userspace, errno.h gets parsed and the go include file
sysinfo.go is generated.

Since EREFUSED is defined to the same value as ECONNREFUSED, and ECONNREFUSED
is defined later on in errno.h, this leads to go complaining that EREFUSED
isn't defined yet.

Fix this trivial problem by moving the define of EREFUSED down after
ECONNREFUSED in errno.h (and clean up the indenting while touching this line).
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org

Commit 54b66800 (parisc: Add native high-resolution sched_clock()
implementation) added support to use the CPU-internal cr16 counters as reliable
clocksource with the help of HAVE_UNSTABLE_SCHED_CLOCK.

Sadly the commit missed to remove the hack which prevented cr16 to become the
default clocksource even on SMP systems.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # 4.7+

The kernel test robot reported a usercopy failure in the new hardened
sanity checks, due to a page-crossing copy of the FPU state into the
task structure.

This happened because the kernel test robot was testing with SLOB, which
doesn't actually do the required book-keeping for slab allocations, and
as a result the hardening code didn't realize that the task struct
allocation was one single allocation - and the sanity checks fail.

Since SLOB doesn't even claim to support hardening (and you really
shouldn't use it), the straightforward solution is to just make the
usercopy hardening code depend on the allocator supporting it.
Reported-by: kernel test robot <xiaolong.ye@intel.com>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull i2c fixes from Wolfram Sang:
 "I2C has some pretty standard driver bugfixes and one minor cleanup"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: meson: Use complete() instead of complete_all()
  i2c: brcmstb: Use complete() instead of complete_all()
  i2c: bcm-kona: Use complete() instead of complete_all()
  i2c: bcm-iproc: Use complete() instead of complete_all()
  i2c: at91: fix support of the "alternative command" feature
  i2c: ocores: add missed clk_disable_unprepare() on failure paths
  i2c: cros-ec-tunnel: Fix usage of cros_ec_cmd_xfer()
  i2c: mux: demux-pinctrl: properly roll back when adding adapter fails

Pull device mapper fixes from Mike Snitzer:

 - a stable fix for DM round robin multipath path selector to disable
   preemption before using this_cpu_ptr()

 - a slight increase in DM crypt's mempool reserves to make swap ontop
   of DM crypt more performant

 - a few DM raid fixes to issues found while testing changes that were
   merged in v4.8-rc1

* tag 'dm-4.8-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm raid: support raid0 with missing metadata devices
  dm raid: enhance attempt_restore_of_faulty_devices() to support more devices
  dm raid: fix restoring of failed devices regression
  dm raid: fix frozen recovery regression
  dm crypt: increase mempool reserve to better support swapping
  dm round robin: do not use this_cpu_ptr() without having preemption disabled

Pull SCSI fixes from James Bottomley:
 "Six fairly small fixes.  The ipr, mpt3sas and ses ones all trigger
  oopses.  The megaraid one fixes an attach failure on io mapped only
  cards, the fcoe one is an obvious problem in the error path and the
  aacraid one is a theoretical security issue (ability to trick the
  kernel into a buffer overrun)"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  ses: Fix racy cleanup of /sys in remove_dev()
  mpt3sas: Fix resume on WarpDrive flash cards
  ipr: Fix sync scsi scan
  megaraid_sas: Fix probing cards without io port
  aacraid: Check size values after double-fetch from user
  fcoe: Use kfree_skb() instead of kfree()

Pull USB fixes from Greg KH:
 "Here are a number of USB fixes for reported issues for your tree.

  The normal amount of gadget fixes, xhci fixes, new device ids, and a
  few other minor things.  All of them have been in linux-next for a
  while, the full details are in the shortlog below"

* tag 'usb-4.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (43 commits)
  xhci: don't dereference a xhci member after removing xhci
  usb: xhci: Fix panic if disconnect
  xhci: really enqueue zero length TRBs.
  xhci: always handle "Command Ring Stopped" events
  cdc-acm: fix wrong pipe type on rx interrupt xfers
  usb: misc: usbtest: add fix for driver hang
  usb: dwc3: gadget: stop processing on HWO set
  usb: dwc3: don't set last bit for ISOC endpoints
  usb: gadget: rndis: free response queue during REMOTE_NDIS_RESET_MSG
  usb: udc: core: fix error handling
  usb: gadget: fsl_qe_udc: off by one in setup_received_handle()
  usb/gadget: fix gadgetfs aio support.
  usb: gadget: composite: Fix return value in case of error
  usb: gadget: uvc: Fix return value in case of error
  usb: gadget: fix check in sync read from ep in gadgetfs
  usb: misc: usbtest: usbtest_do_ioctl may return positive integer
  usb: dwc3: fix missing platform_set_drvdata() in dwc3_of_simple_probe()
  usb: phy: omap-otg: Fix missing platform_set_drvdata() in omap_otg_probe()
  usb: gadget: configfs: add mutex lock before unregister gadget
  usb: gadget: u_ether: fix dereference after null check coverify warning
  ...

Merge tag 'xfs-iomap-for-linus-4.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs

Pull xfs and iomap fixes from Dave Chinner:
 "Changes in this update:

  Regression fixes for XFS changes introduce in 4.8-rc1:
   - buffer IO accounting assert failure
   - ENOSPC block accounting reservation issue
   - DAX IO path page cache invalidation fix
   - rmapbt on-disk block count in agf
   - correct classification of rmap block type when updating AGFL.
   - iomap support for attribute fork mapping

  Regression fixes for iomap infrastructure in 4.8-rc1:
   - fiemap: honor FIEMAP_FLAG_SYNC
   - fiemap: implement FIEMAP_FLAG_XATTR support to fix XFS regression
   - make mark_page_accessed and pagefault_disable usage consistent with
     other IO paths"

* tag 'xfs-iomap-for-linus-4.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs:
  xfs: remove OWN_AG rmap when allocating a block from the AGFL
  xfs: (re-)implement FIEMAP_FLAG_XATTR
  xfs: simplify xfs_file_iomap_begin
  iomap: mark ->iomap_end as optional
  iomap: prepare iomap_fiemap for attribute mappings
  iomap: fiemap should honor the FIEMAP_FLAG_SYNC flag
  iomap: remove superflous pagefault_disable from iomap_write_actor
  iomap: remove superflous mark_page_accessed from iomap_write_actor
  xfs: store rmapbt block count in the AGF
  xfs: don't invalidate whole file on DAX read/write
  xfs: fix bogus space reservation in xfs_iomap_write_allocate
  xfs: don't assert fail on non-async buffers on ioacct decrement

Merge tag 'hwmon-for-linus-v4.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon fixes from Guenter Roeck:
 "Fix a bug in it87 driver and URLs in ftsteutates driver"

* tag 'hwmon-for-linus-v4.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (ftsteutates) Correct ftp urls in driver documentation
  hwmon: (it87) Features mask must be 32 bit wide

Pull more drm fixes from Dave Airlie:
 "Daniel pointed out I'd missed some i915 fixes, and I also found a
  single etnaviv fix I missed.

  So here they are"

* tag 'drm-fixes-for-4.8-rc3-2' of git://people.freedesktop.org/~airlied/linux:
  drm/etnaviv: take GPU lock later in the submit process
  drm/i915: Fix modeset handling during gpu reset, v5.
  drm/i915: fix aliasing_ppgtt leak
  drm/i915: fix WaInsertDummyPushConstPs
  drm/i915: Fix iboost setting for SKL Y/U DP DDI buffer translation entry 2
  drm/i915/gen9: Give one extra block per line for SKL plane WM calculations
  drm/i915: Acquire audio powerwell for HD-Audio registers
  drm/i915: Add missing rpm wakelock to GGTT pread
  drm/i915/fbc: FBC causes display flicker when VT-d is enabled on Skylake
  drm/i915: Clean up the extra RPM ref on CHV with i915.enable_rc6=0
  drm/i915: Program iboost settings for HDMI/DVI on SKL
  drm/i915: Fix iboost setting for DDI with 4 lanes on SKL
  drm/i915: Handle ENOSPC after failing to insert a mappable node
  drm/i915: Flush GT idle status upon reset

Pull DeviceTree fixes from Rob Herring:

 - a couple of DT node ref counting fixes

 - fix __unflatten_device_tree for PPC PCI hotplug case

 - rework marking irq controllers as OF_POPULATED in cases where real
   driver is used.

 - disable of_platform_default_populate_init on PPC.  The change in
   initcall order causes problems which need to be sorted out later.

* tag 'devicetree-fixes-for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  of: fix reference counting in of_graph_get_endpoint_by_regs
  of/platform: disable the of_platform_default_populate_init() for all the ppc boards
  ARM: imx6: mark GPC node as not populated after irq init to probe pm domain driver
  of/irq: Mark interrupt controllers as populated before initialisation
  drivers/of: Validate device node in __unflatten_device_tree()
  of: Delete an unnecessary check before the function call "of_node_put"

Pull documentation fixes from Jonathan Corbet:
 "Three small fixes for Sphinx-formatted documentation generation"

* tag '4.8-doc-fixes' of git://git.lwn.net/linux:
  doc-rst: customize RTD theme, drop padding of inline literal
  docs: kernel-documentation: remove some highlight directives
  docs: Set the Sphinx default highlight language to "guess"

When the controller is configured to be dual role and it's in host mode,
if bind udc and gadgt driver, those gadget operations will do gadget
disconnect and finally pull down DP line, which will break host function.

Cc: <stable@vger.kernel.org> # 4.1+
Signed-off-by: Li Jun <jun.li@nxp.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>

Collection of i915 fixes.

* tag 'drm-intel-fixes-2016-08-15' of git://anongit.freedesktop.org/drm-intel:
  drm/i915: Fix modeset handling during gpu reset, v5.
  drm/i915: fix aliasing_ppgtt leak
  drm/i915: fix WaInsertDummyPushConstPs
  drm/i915: Fix iboost setting for SKL Y/U DP DDI buffer translation entry 2
  drm/i915/gen9: Give one extra block per line for SKL plane WM calculations
  drm/i915: Acquire audio powerwell for HD-Audio registers
  drm/i915: Add missing rpm wakelock to GGTT pread
  drm/i915/fbc: FBC causes display flicker when VT-d is enabled on Skylake
  drm/i915: Clean up the extra RPM ref on CHV with i915.enable_rc6=0
  drm/i915: Program iboost settings for HDMI/DVI on SKL
  drm/i915: Fix iboost setting for DDI with 4 lanes on SKL
  drm/i915: Handle ENOSPC after failing to insert a mappable node
  drm/i915: Flush GT idle status upon reset

Single GPU recovery fix
* 'drm-etnaviv-fixes' of git://git.pengutronix.de/git/lst/linux:
  drm/etnaviv: take GPU lock later in the submit process

Pull x86 fixes from Ingo Molnar:
 "An initrd microcode loading fix, and an SMP bootup topology setup fix
  to resolve crashes on SGI/UV systems if the BIOS is configured in a
  certain way"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/smp: Fix __max_logical_packages value setup
  x86/microcode/AMD: Fix initrd loading with CONFIG_RANDOMIZE_MEMORY=y