- 30 May, 2014 6 commits
-
-
Arun Kumar K authored
Most of the nodes of exynos5420 remains same for exynos5800. So the exynos5420.dtsi is included in exynos5800 and the changed node properties will be overriden. Signed-off-by:
Arun Kumar K <arun.kk@samsung.com> Reviewed-by:
Tomasz Figa <t.figa@samsung.com> Acked-by:
Olof Johansson <olof@lixom.net> Signed-off-by:
Kukjin Kim <kgene.kim@samsung.com>
-
Rahul Sharma authored
The patch adds the dts file for xyref5260 board which is based on exynos5260 SoC. Signed-off-by:
Rahul Sharma <rahul.sharma@samsung.com> Signed-off-by:
-
Rahul Sharma authored
The patch adds the dts files for exynos5260. Signed-off-by:
Pankaj Dubey <pankaj.dubey@samsung.com> Signed-off-by:
Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by:
-
Sachin Kamat authored
Made it as per DT node naming convention <name@reg_addr>. Signed-off-by:
Jingoo Han <jg1.han@samsung.com> Signed-off-by:
-
Sachin Kamat authored
Key code macros improve readability on exnos4210-origen, exynos4412-origen and exynos5250-arndale boards. Signed-off-by:
-
Sachin Kamat authored
Enabled RTC and WDT nodes on exynos4210-origen and exynos4412-origen boards. Signed-off-by:
-
- 22 May, 2014 16 commits
-
-
Chanho Park authored
This patch enables exynos_usbphy and hsotg device nodes. Cc: Tomasz Figa <t.figa@samsung.com> Cc: Kamil Debski <k.debski@samsung.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
Chanho Park <chanho61.park@samsung.com> Signed-off-by:
-
Chanho Park authored
This patch adds a hsotg node for exynos4 USB2.0 device controller. Cc: Tomasz Figa <t.figa@samsung.com> Cc: Kamil Debski <k.debski@samsung.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
-
Chanho Park authored
This patch enables a exynos_usbphy node for exynos4 SoCs. A exynos4x12 usb phy node is almost same with 4210's one except compatible string and pmu syscon. Cc: Tomasz Figa <t.figa@samsung.com> Cc: Kamil Debski <k.debski@samsung.com> Signed-off-by:
-
Chanho Park authored
This patch adds a PMU(Power Management Unit) syscon node. This should be required for USB Phy syscon regmap I/F. Cc: Kamil Debski <k.debski@samsung.com> Signed-off-by:
-
Rahul Sharma authored
Add PMU syscon handle to HDMI dt node for controlling PHY Enable/Disable bit. Signed-off-by:
-
Rahul Sharma authored
Add PMU syscon handle to HDMI dt node for controlling PHY Enable/Disable bit. Signed-off-by:
-
Beomho Seo authored
sss module device node missed clock macro. This patch replace magic number with macro in clock binding for exynos5420. Signed-off-by:
Beomho Seo <beomho.seo@samsung.com> Reviewed-by:
-
Beomho Seo authored
Phy and sss module device node missed clock macro. This patch replace magic number with macros in clock binding for exynos5250. Signed-off-by:
-
Beomho Seo authored
This patch replaces magic number of MIPI DSI Master node with macros in clock binding for exynos4 Signed-off-by:
-
Marek Szyprowski authored
This patch enables support external SD card slot. Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by:
-
Marek Szyprowski authored
This patch enables support for multimedia blocks - fimc in mem2mem mode, no camera sensors support yet. Signed-off-by:
-
Marek Szyprowski authored
This patch adds device tree nodes necessary to enable USB support on universalc210 board, this includes UDC controller (USB gadget) as well as EHCI and OHCI host ports. LDO3 and LDO8 regulators are switched to always on mode until EHCI and OHCI drivers will support them correctly. Signed-off-by:
-
Tomasz Figa authored
This patch adds device tree nodes necessary to enable USB gadget functionality on Exynos4210-based Trats board. Signed-off-by:
-
Sylwester Nawrocki authored
This patch adds the audio subsystem clock controller and the I2S IP block nodes for Exynos4 SoC series. Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
-
Beomho Seo authored
This patch fixed gpio key device node. First, fix incorrect gpio property. And then, add ok-key node where locate bottom center. I have tested on exynos4412-trats2 board. Signed-off-by:
MyungJoo Ham <myungjoo.ham@samsung.com> Reviewed-by:
-
Beomho Seo authored
Exynos4412-trats2 board have light/proximity sensor. This patch add cm36651 light/ proximity sensor node for exynos4412. cm36651 is required properties as below. - Use i2c-gpio for cm36651 sensor. - Use fixed regulator for the IR LED. It is a part of the cm36651 for proximity detection. - cm36651 is i2c device driver so need to use i2c-gpio driver. Signed-off-by:
-
- 21 May, 2014 5 commits
-
-
Vivek Gautam authored
Add required device node for ehci and ohci controllers to enable USB 2.0 support. Signed-off-by:
Vivek Gautam <gautam.vivek@samsung.com> Signed-off-by:
Vikas Sajjan <vikas.sajjan@samsung.com> Signed-off-by:
-
Vivek Gautam authored
Add required device node for usb2phy to let enable USB 2.0 support. Signed-off-by:
-
Kamil Debski authored
Add support to PHY of USB2 of the Exynos5250 SoC. Signed-off-by:
Kamil Debski <k.debski@samsung.com> [gautam.vivek@samsung.com: Split the usb phy entries] [gautam.vivek@samsung.com: Added phy entry for OHCI also along with EHCI] Signed-off-by:
-
Vivek Gautam authored
This patch adds sysreg-syscon node to exynos5250 and exynos5420 device tree, to access System Register's registers using syscon driver. Signed-off-by:
-
Rahul Sharma authored
DP Hpd Gpio pin which is "gpx2-6" in Exynos 5420 based peach board, belongs to Pinctrl_0. It has moved to pinctrl_0 from pinctrl_3. Signed-off-by:
-
- 19 May, 2014 13 commits
-
-
Sachin Kamat authored
Add MFC memory banks to Exynos5420 based SMDK and Arndale-octa boards. Signed-off-by:
-
Rahul Sharma authored
Enable dp-controller for peach-pit board. Signed-off-by:
-
Rahul Sharma authored
Enable fimd for peach-pit board. Signed-off-by:
-
Rahul Sharma authored
Enable dp-controller for snow board. Signed-off-by:
-
Rahul Sharma authored
Enable fimd node for snow board. Signed-off-by:
-
Ajay Kumar authored
Add PWM backlight node for exynos5250 based snow board. Signed-off-by:
Ajay Kumar <ajaykumar.rs@samsung.com> Signed-off-by:
-
Ajay Kumar authored
Adds the PWM nodes to 5250 pinctrl dtsi file. Signed-off-by:
-
Vivek Gautam authored
Add required fixed-regulator for VBUS supply for USB 3.0 controller phy. Signed-off-by:
-
Vivek Gautam authored
Add required fixed-regulator for VBUS supply for USB 3.0 controller phy. Signed-off-by:
-
Vivek Gautam authored
Add required fixed-regulator for VBUS supply for USB 3.0 controller phy. Signed-off-by:
-
Sachin Kamat authored
PD entry was missing in MFC codec node. Signed-off-by:
-
Tushar Behera authored
The audio setup on Peach-pit board is similar to Snow board, hence the sound-card driver used on Snow board can be reused on Peach-pit board. Peach-pit board uses MAX98090 audio codec. Signed-off-by:
Tushar Behera <tushar.behera@linaro.org> Signed-off-by:
-
Tushar Behera authored
The audio codec on Snow board, MAX98095 is connected on I2C7 bus. Also it requires the GPX1-7 line to be pulled up. Updated Snow DTS file to incorporate above changes and added a sound node to instantiate the I2S-based sound card. Signed-off-by:
-
