- 08 Jan, 2005 39 commits
-
-
Con Kolivas authored
Special casing tasks by interactive credit was helpful for preventing fully cpu bound tasks from easily rising to interactive status. However it did not select out tasks that had periods of being fully cpu bound and then sleeping while waiting on pipes, signals etc. This led to a more disproportionate share of cpu time. Backing this out will no longer special case only fully cpu bound tasks, and prevents the variable behaviour that occurs at startup before tasks declare themseleves interactive or not, and speeds up application startup slightly under certain circumstances. It does cost in interactivity slightly as load rises but it is worth it for the fairness gains. Signed-off-by:
Con Kolivas <kernel@kolivas.org> Acked-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Con Kolivas authored
Change the granularity code to requeue tasks at their best priority instead of changing priority while they're running. This keeps tasks at their top interactive level during their whole timeslice. Signed-off-by:
-
Con Kolivas authored
We can requeue tasks for cheaper then doing a complete dequeue followed by an enqueue. Add the requeue_task function and perform it where possible. This will be hit frequently by upcoming changes to the requeueing in timeslice granularity. Signed-off-by:
-
Con Kolivas authored
The minimum timeslice was decreased from 10ms to 5ms. In the process, the timeslice granularity was leading to much more rapid round robinning of interactive tasks at cache trashing levels. Restore minimum granularity to 10ms. Signed-off-by:
-
Con Kolivas authored
Timeslice proportion has been increased substantially for -niced tasks. As a result of this kernel threads have much larger timeslices than they previously had. Change kernel threads' nice value to -5 to bring their timeslice back in line with previous behaviour. This means kernel threads will be less likely to cause large latencies under periods of system stress for normal nice 0 tasks. Signed-off-by:
-
Con Kolivas authored
Convert whitespace in sched.c to tabs Signed-off-by:
-
Anton Blanchard authored
Reset cache_hot_time to sane values (in the ms range). Some recent changes resulted in values in the us range. Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
-
Matthew Dobson authored
There is a small problem with the active_load_balance() patch that Darren sent out last week. As soon as we discover a potential 'target_cpu' from 'cpu_group' to try to push tasks to, we cease considering other CPUs in that group as potential 'target_cpu's. We break out of the for_each_cpu_mask() loop and try to push tasks to that CPU. The problem is that there may well be other idle cpus in that group that we should also try to push tasks to. Here is a patch to fix that small problem. The solution is to simply move the code that tries to push the tasks into the for_each_cpu_mask() loop and do away with the whole 'target_cpu' thing entirely. Compiled & booted on a 16-way x440. Signed-off-by:
-
Andrew Theurer authored
Allow idle_balance to search an incresingly larger span of cpus to find a cpu. Minor change, NODE_SD_INIT gets SD_BALANCE_NEWIDLE flag. This is critical for x86_64, where there is only one cpu oer node. In the current code, idle_balance for Opteron -never- works. Signed-off-by: <habanero@us.ibm.com> Signed-off-by:
-
Andrew Theurer authored
Fix can_migrate to allow aggressive steal for idle cpus. This -was- in mainline, but I believe sched_domains kind of blasted it outta there. IMO, it's a no brainer for an idle cpu (with all that cache going to waste) to be granted to steal a task. The one enhancement I have made was to make sure the whole cpu was idle. Signed-off-by: <habanero@us.ibm.com> Signed-off-by:
-
Andrew Theurer authored
This patch addresses some problems with wake_idle(). Currently wake_idle() will wake a task on an alternate cpu if: 1) task->cpu is not idle 2) an idle cpu can be found However the span of cpus to look for is very limited (only the task->cpu's sibling). The scheduler should find the closest idle cpu, starting with the lowest level domain, then going to higher level domains if allowed (doamin has flag SD_WAKE_IDLE). This patch does this. This and the other two patches (also to be submitted) combined have provided as much at 5% improvement on that "online transaction DB workload" and 2% on the industry standard J@EE workload. I asked Martin Bligh to test these for regression, and he did not find any. I would like to submit for inclusion to -mm and barring any problems eventually to mainline. Signed-off-by: <habanero@us.ibm.com> Signed-off-by:
-
Neil Brown authored
Avoid unlock-without-lock problem on error path in nfsd4_setclientid_confirm Signed-off-by:
Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by:
J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by:
-
Greg Banks authored
With Keith Owens <kaos@sgi.com> This patch from Keith Owens fixes a bug in the ia64 port of oprofile when built without the kdb patch and with a pre-3.4 gcc. If you build a standard kernel with gcc < 3.4 then ia64_spinlock_contention_pre3_4 is defined. But a standard kernel does not have ia64_spinlock_contention_pre3_4_end, that label is only added by the kdb patch. To get the backtrace profiling with gcc < 3.4, the _end label needs to be added as part of the kernprof patch, then I will remove it from kdb. Signed-off-by:
Keith Owens <kaos@sgi.com> Signed-off-by:
Greg Banks <gnb@melbourne.sgi.com> Signed-off-by:
-
Thayne Harbaugh authored
This patch makes several tweaks so that an initramfs image can be completely created by an unprivileged user. It should maintain compatibility with previous initramfs early userspace cpio/image creation and it updates documentation. There are a few very important tweaks: CONFIG_INITRAMFS_SOURCE is now either a single cpio archive that is directly used or a list of directories and files for building a cpio archive for the initramfs image. Making the cpio archive listable in CONFIG_INITRAMFS_SOURCE makes the cpio step more official and automated so that it doesn't have to be copied by hand to usr/initramfs_data.cpio (I think this was broken anyway and would be overwritten). The alternative list of directories *and* files means that files can be install in a "root" directory and device-special files can be listed in a file list. CONFIG_ROOT_UID and CONFIG_ROOT_GID are now available for doing simple user/group ID translation. That means that user ID 500, group ID 500 can create all the files in the "root" directory, but that they can all be owned by user ID 0, group ID 0 in the cpio image. Various documentation updates to pull it all together. Removal of old cruft that was unused/misleading. Signed-off-by:
-
Theodore Y. Ts'o authored
telldir() is broken on large ext3 dir_index'd directories because getdents() gives d_off==0 for the first entry Here's a patch which fixes the problem, but note the following warning from the readdir man page: According to POSIX, the dirent structure contains a field char d_name[] of unspecified size, with at most NAME_MAX characters preceding the terminating null character. Use of other fields will harm the porta- bility of your programs. Also, as always, telldir() and seekdir() are truly awful interfaces because they implicitly assume that (a) a directory is a linear data structure, and (b) that the position in a directory can be expressed in a cookie which hsa only 31 bits on 32-bit systems. So there will be hash colliions that will cause programs that assume that seekdir(dirent->d_off) will always return the next directory entry to sometimes lose directory entries in the not-as-unlikely-as-we-would wish case of a 31-bit hash collision. Really, any program which is using telldir/seekdir really should be rewritten to not use these interfaces if at all possible. So with these caveats.... What we need to do is wire '.' and '..' to have hash values of (0,0) and (2,0), respectively, without ignoring other existing dirents with colliding hashes. (In those cases the programs will break, but they are statistically rare, and there's not much we can do in those cases anyway.) Signed-off-by:"Theodore Ts'o" <tytso@mit.edu> Signed-off-by:
-
Milton D. Miller II authored
According to "initramfs buffer format -- third draft" http://lwn.net/2002/0117/a/initramfs-buffer-format.php3 "the cpio "TRAILER!!!" entry (cpio end-of-archive) is optional, but is not ignored" The kernel handling does not follow this spec. If you add null padding after an uncompressed cpio without TRAILER!!! the kernel complains "no cpio magic". In a gzipped archive one gets "junk in gzipped archive" without the TRAILER!!! This patch changes the state transitions so the kernel will follow the spec. Tested: padded uncompressed, padded compressed, unpadded compressed (error) and trailing junk in compressed (error) === I have a boot loader that knows how to load files, determine their size, and advance to the next 4-byte boundary and reports the total size of the files loaded. It doesn't understand about converting this number to some ASCII representation. With this patch I can embed the contents of a file padded with NULs with out knowing the exact size of the file with the following files: 1) file containing cpio header & file name, padded to 4 bytes 2) contents of file 3) pad file of zeros, the size at least as large as the that specified for the file. hpa points out that you should be careful with the headers, use unique inode numbers and/or add a cpio header with just TRAILER!!! to reset the inode hash table to avoid unwanted hard links. I just put this sequence as the last files loaded. Signed-off-by:
-
Thayne Harbaugh authored
This patch makes gen_init_cpio more complete by adding symlink, pipe and socket support. It updates scripts/gen_initramfs_list.sh to support the new types. The patch applies to the recent mm series that already have the updated gen_init_cpio and gen_initramfs_list.sh. From: William Lee Irwin III <wli@holomorphy.com> The rest of gen_init_cpio.c seems to cast the result of strlen() to handle this situation, so this patch follows suit while killing off size_t -related printk() warnings. Signed-off-by:
William Irwin <wli@holomorphy.com> Signed-off-by:
-
Randy Dunlap authored
Fix init & exit section usage, started with this diagnostic from reference_discarded.pl (make buildcheck): Error: ./drivers/misc/ibmasm/module.o .data refers to 00000058 R_386_32 .exit.text Signed-off-by:
Randy Dunlap <rddunlap@osdl.org> Signed-off-by:
-
Jeff Garzik authored
Attached fixes sysfs naming of sx8 block devs to follow LANANA naming. You then get /sys/block/sx8!0, etc instead of /sys/block/sx80_0 (device names should be /dev/sx8/0 instead of /dev/sx80_0) Signed-off-by:
Jeff Garzik <jgarzik@pobox.com> Signed-off-by:
-
Prasanna Meda authored
Small issue: return value missed in getdents64, but handled in getdents. Signed-Off-by:
Prasanna Meda <pmeda@akamai.com> Signed-off-by:
-
Stas Sergeev authored
The attached patch fixes the CD-ROM autoclose. It is broken in recent kernels for CD-ROMs that do not properly report that the tray is opened. Now on such a drives the kernel will do one close attempt and check for the disc again. This is how it used to work in the past. Signed-off-by:
Stas Sergeev <stsp@aknet.ru> Acked-by:
Alexander Kern <alex.kern@gmx.de> Acked-by:
Jens Axboe <axboe@suse.de> Signed-off-by:
-
Nathan Lynch authored
proc_create() needs to check that the name of an entry to be created does not contain a '/' character. To test, I hacked the ibmveth driver to try to call request_irq with a bogus "foo/bar" devname. The creation of the /proc/irq/1234/xxx entry silently fails, as intended. Perhaps the irq code should be made to check for the failure. Signed-off-by:
Nathan Lynch <nathanl@austin.ibm.com> Signed-off-by:
-
Olaf Hering authored
A few users of request_irq pass a string with '/'. As a result, ls -l /proc/irq/*/* will fail to list these entries. Signed-off-by:
Olaf Hering <olh@suse.de> Signed-off-by:
-
Olof Johansson authored
Earlier cleanup efforts of the ppc64 IOMMU code have mostly been targeted at simplifying the allocation schemes and modularising things for the various platforms. The IOMMU init functions are still a mess. This is an attempt to clean them up and make them somewhat easier to follow. The new rules are: 1. iommu_init_early_<arch> is called before any PCI/VIO init is done 2. The pcibios fixup routines will call the iommu_{bus,dev}_setup functions appropriately as devices are added. TCE space allocation has changed somewhat: * On LPARs, nothing is really different. ibm,dma-window properties are still used to determine table sizes. * On pSeries SMP-mode (non-LPAR), the full TCE space per PHB is split up in 256MB chunks, each handed out to one child bus/slot as needed. This makes current max 7 child buses per PHB, something we're currently below on all machine models I'm aware of. * Exception to the above: Pre-POWER4 machines with Python PHBs have a full GB of DMA space allocated at the PHB level, since there are no EADS-level tables on such systems. * PowerMac and Maple still work like before: all buses/slots share one table. * VIO works like before, ibm,my-dma-window is used like before. * iSeries has not been touched much at all, besides the changed unit of the it_size variable in struct iommu_table. Other things changed: * Powermac and maple PCI/IOMMU inits have been changed a bit to conform to the new init structure * pci_dma_direct.c has been renamed pci_direct_iommu.c to match pci_iommu.c (see separate patch) * Likewise, a couple of the pci direct init functions have been renamed. Signed-off-by:Olof Johansson <olof@austin.ibm.com> Acked-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
-
Olof Johansson authored
This patch renames pci_dma_direct.c to pci_direct_iommu.c to comply to the naming convention of the other iommu files. This is part of the iommu cleanup, but broken out as a separate patch since for mainline, a BK rename is more appropriate. Still, we need a patch to apply for non-BK-based trees (-mm) Signed-off-by:
-
Paul Mackerras authored
This patch is from Jake Moilanen <moilanen@austin.ibm.com>. Log machine check errors to error log and NVRAM. Signed-off-by:
Dave Altobelli <dalto@austin.ibm.com> Signed-off-by:
Jake Moilanen <moilanen@austin.ibm.com> Signed-off-by:
-
Paul Mackerras authored
This patch is from Jake Moilanen <moilanen@austin.ibm.com>. Changed the naming conventions for head.S to more closely follow the Linux naming conventions. Signed-off-by:
-
Paul Mackerras authored
This patch is from Jake Moilanen <moilanen@austin.ibm.com>. Clean-up of traps.c. Moved the machine dependent calls to a ppc_md call, and moved the pSeries specific code to ras.c. I also changed the naming convention to more closely follow the Linux standards. Signed-off-by:
-
Paul Mackerras authored
This patch is from Nathan Fontenot <nfont@austin.ibm.com> originally. The PPC64 EEH code needs a small update to start using the ibm,read-slot-reset-state2 rtas call if available. The currently used ibm,read-slot-reset-state call will be going away on future machines. This patch attempts to use the newer rtas call if available and falls back the older version otherwise. This will maintain EEH slot checking capabilities on all future and current firmware levels. Signed-off-by:
Nathan Fontenot <nfont@austin.ibm.com> Signed-off-by:
-
David Gibson authored
Most special purpose registers on the ppc64 have both the SPR number, and the various fields within the register defined in asm-ppc64/processor.h. So far that's not true for the performance counter control registers, MMCR0 and MMCRA. They have the SPR numbers defined, but the internal fields are defined in the oprofile code and (just a few) in traps.c where they're actually used. This patch moves all the MMCR0 and MMCRA definitions, plus the MSR performance monitor bit, MSR_PMM, into processor.h. Signed-off-by:
-
Nick Piggin authored
Signed-off-by:
-
Rik van Riel authored
OOM kills have been observed with 70% of the pages in lowmem being in the writeback state. If we count those pages in sc->nr_scanned, the VM should throttle and wait for IO completion, instead of OOM killing. (akpm: this is how the code was designed to work - we broke it six months ago). Signed-off-by:
Rik van Riel <riel@redhat.com> Signed-off-by:
-
Hirokazu Takata authored
This patch is required to fix compile errors for m32r. This was originally given by the following patch: [PATCH] move irq_enter and irq_exit to common code http://www.ussg.iu.edu/hypermail/linux/kernel/0411.1/1738.html I think it was maybe accidentally dropped only for the m32r arch due to a patching conflict with the other patches or something like that. Signed-off-by:
Hirokazu Takata <takata@linux-m32r.org> Signed-off-by:
-
William Lee Irwin III authored
I'm being at least sometimes deferred to for hugetlb maintenance. I also originally wrote the fs methods, and generally get stuck working on it on a regular basis. So here is a MAINTAINERS entry reflecting that. Signed-off-by:
-
Hirokazu Takata authored
oprofile m32r arch updates, including some API changes. Signed-off-by:
-
Andrew Morton authored
Kconfig symbols are always uppercase. Signed-off-by:
-
Linus Torvalds authored
-
Christoph Hellwig authored
Acked-by:
Al Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by:
-
Linus Torvalds authored
clear_page_range()/4-level page table updates.
-
- 07 Jan, 2005 1 commit
-
-
bk://bk.arm.linux.org.uk/linux-2.6-rmkLinus Torvalds authored
into ppc970.osdl.org:/home/torvalds/v2.6/linux
-
