- 15 Dec, 2016 37 commits
-
-
Douglas Anderson authored
We've got a delay loop waiting for secondary CPUs. That loop uses loops_per_jiffy. However, loops_per_jiffy doesn't actually mean how many tight loops make up a jiffy on all architectures. It is quite common to see things like this in the boot log: Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=24000) In my case I was seeing lots of cases where other CPUs timed out entering the debugger only to print their stack crawls shortly after the kdb> prompt was written. Elsewhere in kgdb we already use udelay(), so that should be safe enough to use to implement our timeout. We'll delay 1 ms for 1000 times, which should give us a full second of delay (just like the old code wanted) but allow us to notice that we're done every 1 ms. [akpm@linux-foundation.org: simplifications, per Daniel] Link: http://lkml.kernel.org/r/1477091361-2039-1-git-send-email-dianders@chromium.orgSigned-off-by:
Douglas Anderson <dianders@chromium.org> Reviewed-by:
Daniel Thompson <daniel.thompson@linaro.org> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Brian Norris <briannorris@chromium.org> Cc: <stable@vger.kernel.org> [4.0+] Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Kefeng Wang authored
It is fragile that some definitions acquired via transitive dependencies, as shown in below: atomic_* (<linux/atomic.h>) ENOMEM/EN* (<linux/errno.h>) EXPORT_SYMBOL (<linux/export.h>) device_initcall (<linux/init.h>) preempt_* (<linux/preempt.h>) Include them to prevent possible issues. Link: http://lkml.kernel.org/r/1481163221-40170-1-git-send-email-wangkefeng.wang@huawei.comSigned-off-by:
Kefeng Wang <wangkefeng.wang@huawei.com> Suggested-by:
Mark Rutland <mark.rutland@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: James Morse <james.morse@arm.com> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by:
-
Andreas Platschek authored
Documenation/ubsan.txt was moved to Documentation/dev-tools/ubsan.rst, this fixes the reference. Link: http://lkml.kernel.org/r/1476698152-29340-3-git-send-email-andreas.platschek@opentech.atSigned-off-by:
Andreas Platschek <andreas.platschek@opentech.at> Signed-off-by:
-
Andreas Platschek authored
Documentation on development tools was moved to Documentation/devl-tools and sphinxified (renamed from .txt to .rst). References in lib/Kconfig.debug need to be updated to the new location. Link: http://lkml.kernel.org/r/1476698152-29340-2-git-send-email-andreas.platschek@opentech.atSigned-off-by:
-
Dan Carpenter authored
Smatch complains that we started using the array offset before we checked that it was valid. Fixes: 017c59c0 ('relay: Use per CPU constructs for the relay channel buffer pointers') Link: http://lkml.kernel.org/r/20161013084947.GC16198@mwandaSigned-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Alexander Duyck authored
Update the driver code so that we do bulk updates of the page reference count instead of just incrementing it by one reference at a time. The advantage to doing this is that we cut down on atomic operations and this in turn should give us a slight improvement in cycles per packet. In addition if we eventually move this over to using build_skb the gains will be more noticeable. Link: http://lkml.kernel.org/r/20161110113616.76501.17072.stgit@ahduyck-blue-test.jf.intel.comSigned-off-by:
Alexander Duyck <alexander.h.duyck@intel.com> Acked-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: David Howells <dhowells@redhat.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> Cc: Helge Deller <deller@gmx.de> Cc: James Hogan <james.hogan@imgtec.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Keguang Zhang <keguang.zhang@gmail.com> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Rich Felker <dalias@libc.org> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Steven Miao <realmz6@gmail.com> Cc: Tobias Klauser <tklauser@distanz.ch> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by:
-
Alexander Duyck authored
The ARM architecture provides a mechanism for deferring cache line invalidation in the case of map/unmap. This patch makes use of this mechanism to avoid unnecessary synchronization. A secondary effect of this change is that the portion of the page that has been synchronized for use by the CPU should be writable and could be passed up the stack (at least on ARM). The last bit that occurred to me is that on architectures where the sync_for_cpu call invalidates cache lines we were prefetching and then invalidating the first 128 bytes of the packet. To avoid that I have moved the sync up to before we perform the prefetch and allocate the skbuff so that we can actually make use of it. Link: http://lkml.kernel.org/r/20161110113611.76501.98897.stgit@ahduyck-blue-test.jf.intel.comSigned-off-by:
-
Alexander Duyck authored
Add a function that allows us to batch free a page that has multiple references outstanding. Specifically this function can be used to drop a page being used in the page frag alloc cache. With this drivers can make use of functionality similar to the page frag alloc cache without having to do any workarounds for the fact that there is no function that frees multiple references. Link: http://lkml.kernel.org/r/20161110113606.76501.70752.stgit@ahduyck-blue-test.jf.intel.comSigned-off-by:
-
Alexander Duyck authored
Add support for mapping and unmapping a page with attributes. The primary use for this is currently to allow for us to pass the DMA_ATTR_SKIP_CPU_SYNC attribute when mapping and unmapping a page. On some architectures such as ARM the synchronization has significant overhead and if we are already taking care of the sync_for_cpu and sync_for_device from the driver there isn't much need to handle this in the map/unmap calls as well. Link: http://lkml.kernel.org/r/20161110113601.76501.46095.stgit@ahduyck-blue-test.jf.intel.comSigned-off-by:
-
Alexander Duyck authored
This change allows us to pass DMA_ATTR_SKIP_CPU_SYNC which allows us to avoid invoking cache line invalidation if the driver will just handle it via a sync_for_cpu or sync_for_device call. Link: http://lkml.kernel.org/r/20161110113555.76501.52536.stgit@ahduyck-blue-test.jf.intel.comSigned-off-by:
-
Alexander Duyck authored
This change allows us to pass DMA_ATTR_SKIP_CPU_SYNC which allows us to avoid invoking cache line invalidation if the driver will just handle it via a sync_for_cpu or sync_for_device call. Link: http://lkml.kernel.org/r/20161110113550.76501.73060.stgit@ahduyck-blue-test.jf.intel.comSigned-off-by:
-
Alexander Duyck authored
This change allows us to pass DMA_ATTR_SKIP_CPU_SYNC which allows us to avoid invoking cache line invalidation if the driver will just handle it via a sync_for_cpu or sync_for_device call. Link: http://lkml.kernel.org/r/20161110113544.76501.40008.stgit@ahduyck-blue-test.jf.intel.comSigned-off-by:
-
Alexander Duyck authored
This change allows us to pass DMA_ATTR_SKIP_CPU_SYNC which allows us to avoid invoking cache line invalidation if the driver will just handle it via a sync_for_cpu or sync_for_device call. Link: http://lkml.kernel.org/r/20161110113539.76501.6539.stgit@ahduyck-blue-test.jf.intel.comSigned-off-by:
-
Alexander Duyck authored
This change allows us to pass DMA_ATTR_SKIP_CPU_SYNC which allows us to avoid invoking cache line invalidation if the driver will just handle it via a sync_for_cpu or sync_for_device call. Link: http://lkml.kernel.org/r/20161110113534.76501.86492.stgit@ahduyck-blue-test.jf.intel.comSigned-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Alexander Duyck authored
This change allows us to pass DMA_ATTR_SKIP_CPU_SYNC which allows us to avoid invoking cache line invalidation if the driver will just handle it via a sync_for_cpu or sync_for_device call. Link: http://lkml.kernel.org/r/20161110113529.76501.44762.stgit@ahduyck-blue-test.jf.intel.comSigned-off-by:
-
Alexander Duyck authored
This change allows us to pass DMA_ATTR_SKIP_CPU_SYNC which allows us to avoid invoking cache line invalidation if the driver will just handle it via a sync_for_cpu or sync_for_device call. Link: http://lkml.kernel.org/r/20161110113524.76501.87966.stgit@ahduyck-blue-test.jf.intel.comSigned-off-by:
-
Alexander Duyck authored
This change allows us to pass DMA_ATTR_SKIP_CPU_SYNC which allows us to avoid invoking cache line invalidation if the driver will just handle it via a sync_for_cpu or sync_for_device call. Link: http://lkml.kernel.org/r/20161110113518.76501.52225.stgit@ahduyck-blue-test.jf.intel.comSigned-off-by:
Tobias Klauser <tklauser@distanz.ch> Cc: Ley Foon Tan <lftan@altera.com> Signed-off-by:
-
Alexander Duyck authored
This change allows us to pass DMA_ATTR_SKIP_CPU_SYNC which allows us to avoid invoking cache line invalidation if the driver will just handle it via a sync_for_cpu or sync_for_device call. Link: http://lkml.kernel.org/r/20161110113513.76501.32321.stgit@ahduyck-blue-test.jf.intel.comSigned-off-by:
-
Alexander Duyck authored
This change allows us to pass DMA_ATTR_SKIP_CPU_SYNC which allows us to avoid invoking cache line invalidation if the driver will just handle it via a sync_for_cpu or sync_for_device call. Link: http://lkml.kernel.org/r/20161110113508.76501.77583.stgit@ahduyck-blue-test.jf.intel.comSigned-off-by:
-
Alexander Duyck authored
This change allows us to pass DMA_ATTR_SKIP_CPU_SYNC which allows us to avoid invoking cache line invalidation if the driver will just handle it via a sync_for_cpu or sync_for_device call. Link: http://lkml.kernel.org/r/20161110113503.76501.80809.stgit@ahduyck-blue-test.jf.intel.comSigned-off-by:
-
Alexander Duyck authored
This change allows us to pass DMA_ATTR_SKIP_CPU_SYNC which allows us to avoid invoking cache line invalidation if the driver will just handle it later via a sync_for_cpu or sync_for_device call. Link: http://lkml.kernel.org/r/20161110113457.76501.77603.stgit@ahduyck-blue-test.jf.intel.comSigned-off-by:
-
Alexander Duyck authored
This change allows us to pass DMA_ATTR_SKIP_CPU_SYNC which allows us to avoid invoking cache line invalidation if the driver will just handle it later via a sync_for_cpu or sync_for_device call. Link: http://lkml.kernel.org/r/20161110113452.76501.45864.stgit@ahduyck-blue-test.jf.intel.comSigned-off-by:
-
Alexander Duyck authored
The use of DMA_ATTR_SKIP_CPU_SYNC was not consistent across all of the DMA APIs in the arch/arm folder. This change is meant to correct that so that we get consistent behavior. Link: http://lkml.kernel.org/r/20161110113447.76501.93160.stgit@ahduyck-blue-test.jf.intel.comSigned-off-by:
-
Alexander Duyck authored
This change allows us to pass DMA_ATTR_SKIP_CPU_SYNC which allows us to avoid invoking cache line invalidation if the driver will just handle it later via a sync_for_cpu or sync_for_device call. Link: http://lkml.kernel.org/r/20161110113442.76501.7673.stgit@ahduyck-blue-test.jf.intel.comSigned-off-by:
Mark Salter <msalter@redhat.com> Signed-off-by:
-
Alexander Duyck authored
The use of DMA_ATTR_SKIP_CPU_SYNC was not consistent across all of the DMA APIs in the arch/arm folder. This change is meant to correct that so that we get consistent behavior. Link: http://lkml.kernel.org/r/20161110113436.76501.13386.stgit@ahduyck-blue-test.jf.intel.comSigned-off-by:
-
Alexander Duyck authored
The use of DMA_ATTR_SKIP_CPU_SYNC was not consistent across all of the DMA APIs in the arch/arm folder. This change is meant to correct that so that we get consistent behavior. Link: http://lkml.kernel.org/r/20161110113430.76501.79737.stgit@ahduyck-blue-test.jf.intel.comSigned-off-by:
Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> Signed-off-by:
-
Alexander Duyck authored
The use of DMA_ATTR_SKIP_CPU_SYNC was not consistent across all of the DMA APIs in the arch/arm folder. This change is meant to correct that so that we get consistent behavior. Link: http://lkml.kernel.org/r/20161110113424.76501.2715.stgit@ahduyck-blue-test.jf.intel.comSigned-off-by:
-
Alexander Duyck authored
Patch series "Add support for DMA writable pages being writable by the network stack", v3. The first 19 patches in the set add support for the DMA attribute DMA_ATTR_SKIP_CPU_SYNC on multiple platforms/architectures. This is needed so that we can flag the calls to dma_map/unmap_page so that we do not invalidate cache lines that do not currently belong to the device. Instead we have to take care of this in the driver via a call to sync_single_range_for_cpu prior to freeing the Rx page. Patch 20 adds support for dma_map_page_attrs and dma_unmap_page_attrs so that we can unmap and map a page using the DMA_ATTR_SKIP_CPU_SYNC attribute. Patch 21 adds support for freeing a page that has multiple references being held by a single caller. This way we can free page fragments that were allocated by a given driver. The last 2 patches use these updates in the igb driver, and lay the groundwork to allow for us to reimplement the use of build_skb. This patch (of 23): This change allows us to pass DMA_ATTR_SKIP_CPU_SYNC which allows us to avoid invoking cache line invalidation if the driver will just handle it later via a sync_for_cpu or sync_for_device call. Link: http://lkml.kernel.org/r/20161110113419.76501.38491.stgit@ahduyck-blue-test.jf.intel.comSigned-off-by:
Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
-
Tetsuo Handa authored
Do not break lines while printk()ing values. kernel: warning: process `tomoyo_file_tes' used the deprecated sysctl system call with kernel: 3. kernel: 5. kernel: 56. kernel: Link: http://lkml.kernel.org/r/1480814833-4976-1-git-send-email-penguin-kernel@I-love.SAKURA.ne.jpSigned-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
zhong jiang authored
A soft lookup will occur when I run trinity in syscall kexec_load. the corresponding stack information is as follows. BUG: soft lockup - CPU#6 stuck for 22s! [trinity-c6:13859] Kernel panic - not syncing: softlockup: hung tasks CPU: 6 PID: 13859 Comm: trinity-c6 Tainted: G O L ----V------- 3.10.0-327.28.3.35.zhongjiang.x86_64 #1 Hardware name: Huawei Technologies Co., Ltd. Tecal BH622 V2/BC01SRSA0, BIOS RMIBV386 06/30/2014 Call Trace: <IRQ> dump_stack+0x19/0x1b panic+0xd8/0x214 watchdog_timer_fn+0x1cc/0x1e0 __hrtimer_run_queues+0xd2/0x260 hrtimer_interrupt+0xb0/0x1e0 ? call_softirq+0x1c/0x30 local_apic_timer_interrupt+0x37/0x60 smp_apic_timer_interrupt+0x3f/0x60 apic_timer_interrupt+0x6d/0x80 <EOI> ? kimage_alloc_control_pages+0x80/0x270 ? kmem_cache_alloc_trace+0x1ce/0x1f0 ? do_kimage_alloc_init+0x1f/0x90 kimage_alloc_init+0x12a/0x180 SyS_kexec_load+0x20a/0x260 system_call_fastpath+0x16/0x1b the first time allocation of control pages may take too much time because crash_res.end can be set to a higher value. we need to add cond_resched to avoid the issue. The patch have been tested and above issue is not appear. Link: http://lkml.kernel.org/r/1481164674-42775-1-git-send-email-zhongjiang@huawei.comSigned-off-by:
zhong jiang <zhongjiang@huawei.com> Acked-by:
-
Baoquan He authored
Currently in x86_64, the symbol address of phys_base is exported to vmcoreinfo. Dave Anderson complained this is really useless for his Crash implementation. Because in user-space utility Crash and Makedumpfile which exported vmcore information is mainly used for, value of phys_base is needed to covert virtual address of exported kernel symbol to physical address. Especially init_level4_pgt, if we want to access and go over the page table to look up a PA corresponding to VA, firstly we need calculate page_dir = SYMBOL(init_level4_pgt) - __START_KERNEL_map + phys_base; Now in Crash and Makedumpfile, we have to analyze the vmcore elf program header to get value of phys_base. As Dave said, it would be preferable if it were readily availabl in vmcoreinfo rather than depending upon the PT_LOAD semantics. Hence in this patch change to export the value of phys_base instead of its virtual address. And people also complained that KERNEL_IMAGE_SIZE exporting is x86_64 only, should be moved into arch dependent function arch_crash_save_vmcoreinfo. Do the moving in this patch. Link: http://lkml.kernel.org/r/1478568596-30060-2-git-send-email-bhe@redhat.comSigned-off-by:
Baoquan He <bhe@redhat.com> Cc: Thomas Garnier <thgarnie@google.com> Cc: Baoquan He <bhe@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H . Peter Anvin" <hpa@zytor.com> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Xunlei Pang <xlpang@redhat.com> Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Cc: Kees Cook <keescook@chromium.org> Cc: Eugene Surovegin <surovegin@google.com> Cc: Dave Young <dyoung@redhat.com> Cc: AKASHI Takahiro <takahiro.akashi@linaro.org> Cc: Atsushi Kumagai <ats-kumagai@wm.jp.nec.com> Cc: Dave Anderson <anderson@redhat.com> Cc: Pratyush Anand <panand@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by:
-
Baoquan He authored
This reverts commit 0549a3c0 ("kdump, vmcoreinfo: report memory sections virtual addresses"). Commit 0549a3c0 tells the userspace utility makedumpfile the randomized base address of these memmory sections when mm kaslr is enabled. However the following patch "kexec: export the value of phys_base instead of symbol address" makes makedumpfile not need these addresses any more. Besides we should use VMCOREINFO_NUMBER to export the value of the variable so that we can use the existing number_table mechanism of Makedumpfile to fetch it. So revert it now. If needed we can add it later. http://lists.infradead.org/pipermail/kexec/2016-October/017540.html Link: http://lkml.kernel.org/r/1478568596-30060-1-git-send-email-bhe@redhat.comSigned-off-by:
-
Alexey Dobriyan authored
I was amused to find "unsafe core_pattern" warning having these lines in /etc/sysctl.conf: fs.suid_dumpable=2 kernel.core_pattern=/core/core-%e-%p-%E kernel.core_uses_pid=0 Turns out kernel is formally right. Default core_pattern is just "core", which doesn't qualify for secure path while setting suid.dumpable. Hint admins about solution, clarify sysctl names, delete unnecessary '\' characters (string literals are concatenated regardless) and reformat for easier grepping. Link: http://lkml.kernel.org/r/20161029152124.GA1258@avx2Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Acked-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Waiman Long authored
When running certain database workload on a high-end system with many CPUs, it was found that spinlock contention in the sigprocmask syscalls became a significant portion of the overall CPU cycles as shown below. 9.30% 9.30% 905387 dataserver /proc/kcore 0x7fff8163f4d2 [k] _raw_spin_lock_irq | ---_raw_spin_lock_irq | |--99.34%-- __set_current_blocked | sigprocmask | sys_rt_sigprocmask | system_call_fastpath | | | |--50.63%-- __swapcontext | | | | | |--99.91%-- upsleepgeneric | | | |--49.36%-- __setcontext | | ktskRun Looking further into the swapcontext function in glibc, it was found that the function always call sigprocmask() without checking if there are changes in the signal mask. A check was added to the __set_current_blocked() function to avoid taking the sighand->siglock spinlock if there is no change in the signal mask. This will prevent unneeded spinlock contention when many threads are trying to call sigprocmask(). With this patch applied, the spinlock contention in sigprocmask() was gone. Link: http://lkml.kernel.org/r/1474979209-11867-1-git-send-email-Waiman.Long@hpe.comSigned-off-by:Waiman Long <Waiman.Long@hpe.com> Acked-by:
Oleg Nesterov <oleg@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Stas Sergeev <stsp@list.ru> Cc: Scott J Norton <scott.norton@hpe.com> Cc: Douglas Hatch <doug.hatch@hpe.com> Signed-off-by:
-
Michal Hocko authored
compaction has been disabled for GFP_NOFS and GFP_NOIO requests since the direct compaction was introduced by commit 56de7263 ("mm: compaction: direct compact when a high-order allocation fails"). The main reason is that the migration of page cache pages might recurse back to fs/io layer and we could potentially deadlock. This is overly conservative because all the anonymous memory is migrateable in the GFP_NOFS context just fine. This might be a large portion of the memory in many/most workkloads. Remove the GFP_NOFS restriction and make sure that we skip all fs pages (those with a mapping) while isolating pages to be migrated. We cannot consider clean fs pages because they might need a metadata update so only isolate pages without any mapping for nofs requests. The effect of this patch will be probably very limited in many/most workloads because higher order GFP_NOFS requests are quite rare, although different configurations might lead to very different results. David Chinner has mentioned a heavy metadata workload with 64kB block which to quote him: : Unfortunately, there was an era of cargo cult configuration tweaks in the : Ceph community that has resulted in a large number of production machines : with XFS filesystems configured this way. And a lot of them store large : numbers of small files and run under significant sustained memory : pressure. : : I slowly working towards getting rid of these high order allocations and : replacing them with the equivalent number of single page allocations, but : I haven't got that (complex) change working yet. We can do the following to simulate that workload: $ mkfs.xfs -f -n size=64k <dev> $ mount <dev> /mnt/scratch $ time ./fs_mark -D 10000 -S0 -n 100000 -s 0 -L 32 \ -d /mnt/scratch/0 -d /mnt/scratch/1 \ -d /mnt/scratch/2 -d /mnt/scratch/3 \ -d /mnt/scratch/4 -d /mnt/scratch/5 \ -d /mnt/scratch/6 -d /mnt/scratch/7 \ -d /mnt/scratch/8 -d /mnt/scratch/9 \ -d /mnt/scratch/10 -d /mnt/scratch/11 \ -d /mnt/scratch/12 -d /mnt/scratch/13 \ -d /mnt/scratch/14 -d /mnt/scratch/15 and indeed is hammers the system with many high order GFP_NOFS requests as per a simle tracepoint during the load: $ echo '!(gfp_flags & 0x80) && (gfp_flags &0x400000)' > $TRACE_MNT/events/kmem/mm_page_alloc/filter I am getting 5287609 order=0 37 order=1 1594905 order=2 3048439 order=3 6699207 order=4 66645 order=5 My testing was done in a kvm guest so performance numbers should be taken with a grain of salt but there seems to be a difference when the patch is applied: * Original kernel FSUse% Count Size Files/sec App Overhead 1 1600000 0 4300.1 20745838 3 3200000 0 4239.9 23849857 5 4800000 0 4243.4 25939543 6 6400000 0 4248.4 19514050 8 8000000 0 4262.1 20796169 9 9600000 0 4257.6 21288675 11 11200000 0 4259.7 19375120 13 12800000 0 4220.7 22734141 14 14400000 0 4238.5 31936458 16 16000000 0 4231.5 23409901 18 17600000 0 4045.3 23577700 19 19200000 0 2783.4 58299526 21 20800000 0 2678.2 40616302 23 22400000 0 2693.5 83973996 and xfs complaining about memory allocation not making progress [ 2304.372647] XFS: fs_mark(3289) possible memory allocation deadlock size 65624 in kmem_alloc (mode:0x2408240) [ 2304.443323] XFS: fs_mark(3285) possible memory allocation deadlock size 65728 in kmem_alloc (mode:0x2408240) [ 4796.772477] XFS: fs_mark(3424) possible memory allocation deadlock size 46936 in kmem_alloc (mode:0x2408240) [ 4796.775329] XFS: fs_mark(3423) possible memory allocation deadlock size 51416 in kmem_alloc (mode:0x2408240) [ 4797.388808] XFS: fs_mark(3424) possible memory allocation deadlock size 65728 in kmem_alloc (mode:0x2408240) * Patched kernel FSUse% Count Size Files/sec App Overhead 1 1600000 0 4289.1 19243934 3 3200000 0 4241.6 32828865 5 4800000 0 4248.7 32884693 6 6400000 0 4314.4 19608921 8 8000000 0 4269.9 24953292 9 9600000 0 4270.7 33235572 11 11200000 0 4346.4 40817101 13 12800000 0 4285.3 29972397 14 14400000 0 4297.2 20539765 16 16000000 0 4219.6 18596767 18 17600000 0 4273.8 49611187 19 19200000 0 4300.4 27944451 21 20800000 0 4270.6 22324585 22 22400000 0 4317.6 22650382 24 24000000 0 4065.2 22297964 So the dropdown at Count 19200000 didn't happen and there was only a single warning about allocation not making progress [ 3063.815003] XFS: fs_mark(3272) possible memory allocation deadlock size 65624 in kmem_alloc (mode:0x2408240) This suggests that the patch has helped even though there is not all that much of anonymous memory as the workload mostly generates fs metadata. I assume the success rate would be higher with more anonymous memory which should be the case in many workloads. [akpm@linux-foundation.org: fix comment] Link: http://lkml.kernel.org/r/20161012114721.31853-1-mhocko@kernel.orgSigned-off-by:
Michal Hocko <mhocko@suse.com> Acked-by:
Vlastimil Babka <vbabka@suse.cz> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Joonsoo Kim <js1304@gmail.com> Cc: Dave Chinner <david@fromorbit.com> Signed-off-by:
-
Konstantin Khlebnikov authored
NMI handler doesn't call set_irq_regs(), it's set only by normal IRQ. Thus get_irq_regs() returns NULL or stale registers snapshot with IP/SP pointing to the code interrupted by IRQ which was interrupted by NMI. NULL isn't a problem: in this case watchdog calls dump_stack() and prints full stack trace including NMI. But if we're stuck in IRQ handler then NMI watchlog will print stack trace without IRQ part at all. This patch uses registers snapshot passed into NMI handler as arguments: these registers point exactly to the instruction interrupted by NMI. Fixes: 55537871 ("kernel/watchdog.c: perform all-CPU backtrace in case of hard lockup") Link: http://lkml.kernel.org/r/146771764784.86724.6006627197118544150.stgit@buzzSigned-off-by:
Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Ulrich Obergfell <uobergfe@redhat.com> Cc: Aaron Tomlin <atomlin@redhat.com> Cc: <stable@vger.kernel.org> [4.4+] Signed-off-by:
-
Petr Mladek authored
Commit 262c5e86 ("printk/btrfs: handle more message headers") triggers: warning: `ratelimit' may be used uninitialized in this function with gcc (4.1.2) and probably many other versions. The code actually is correct but a bit twisted. Let's make it more straightforward and set the default values at the beginning. Link: http://lkml.kernel.org/r/20161213135246.GQ3506@pathway.suse.czSigned-off-by:
Petr Mladek <pmladek@suse.com> Reported-by:
Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
- 14 Dec, 2016 3 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dmLinus Torvalds authored
Pull device mapper updates from Mike Snitzer: - various fixes and improvements to request-based DM and DM multipath - some locking improvements in DM bufio - add Kconfig option to disable the DM block manager's extra locking which mainly serves as a developer tool - a few bug fixes to DM's persistent-data - a couple changes to prepare for multipage biovec support in the block layer - various improvements and cleanups in the DM core, DM cache, DM raid and DM crypt - add ability to have DM crypt use keys from the kernel key retention service - add a new "error_writes" feature to the DM flakey target, reads are left unchanged in this mode * tag 'dm-4.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (40 commits) dm flakey: introduce "error_writes" feature dm cache policy smq: use hash_32() instead of hash_32_generic() dm crypt: reject key strings containing whitespace chars dm space map: always set ev if sm_ll_mutate() succeeds dm space map metadata: skip useless memcpy in metadata_ll_init_index() dm space map metadata: fix 'struct sm_metadata' leak on failed create Documentation: dm raid: define data_offset status field dm raid: fix discard support regression dm raid: don't allow "write behind" with raid4/5/6 dm mpath: use hw_handler_params if attached hw_handler is same as requested dm crypt: add ability to use keys from the kernel key retention service dm array: remove a dead assignment in populate_ablock_with_values() dm ioctl: use offsetof() instead of open-coding it dm rq: simplify use_blk_mq initialization dm: use blk_set_queue_dying() in __dm_destroy() dm bufio: drop the lock when doing GFP_NOIO allocation dm bufio: don't take the lock in dm_bufio_shrink_count dm bufio: avoid sleeping while holding the dm_bufio lock dm table: simplify dm_table_determine_type() dm table: an 'all_blk_mq' table must be loaded for a blk-mq DM device ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/shli/mdLinus Torvalds authored
Pull MD updates from Shaohua Li: - a raid5 writeback cache feature. The goal is to aggregate writes to make full stripe write and reduce read-modify-write. It's helpful for workload which does sequential write and follows fsync for example. This feature is experimental and off by default right now. - FAILFAST support. This fails IOs to broken raid disks quickly, so can improve latency. It's mainly for DASD storage, but some patches help normal raid array too. - support bad block for raid array with external metadata - AVX2 instruction support for raid6 parity calculation - normalize MD info output - add missing blktrace - other bug fixes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md: (66 commits) md: separate flags for superblock changes md: MD_RECOVERY_NEEDED is set for mddev->recovery md: takeover should clear unrelated bits md/r5cache: after recovery, increase journal seq by 10000 md/raid5-cache: fix crc in rewrite_data_only_stripes() md/raid5-cache: no recovery is required when create super-block md: fix refcount problem on mddev when stopping array. md/r5cache: do r5c_update_log_state after log recovery md/raid5-cache: adjust the write position of the empty block if no data blocks md/r5cache: run_no_space_stripes() when R5C_LOG_CRITICAL == 0 md/raid5: limit request size according to implementation limits md/raid5-cache: do not need to set STRIPE_PREREAD_ACTIVE repeatedly md/raid5-cache: remove the unnecessary next_cp_seq field from the r5l_log md/raid5-cache: release the stripe_head at the appropriate location md/raid5-cache: use ring add to prevent overflow md/raid5-cache: remove unnecessary function parameters raid5-cache: don't set STRIPE_R5C_PARTIAL_STRIPE flag while load stripe into cache raid5-cache: add another check conditon before replaying one stripe md/r5cache: enable IRQs on error path md/r5cache: handle alloc_page failure ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds authored
Pull another MMC update from Ulf Hansson: "Here's a second pull request for MMC for v4.10. As a matter of fact it's only one change that moves some mmc files around. I thought it was a good idea to get this into v4.10, as it gives us a nice and fresh base for v4.11. Summary: MMC core: - Move files from the card directory to the core directory to enable future clean-ups of the generic mmc header files and interfaces" * tag 'mmc-v4.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: block: Move files to core
-
