- 12 Jan, 2010 40 commits
-
-
Johannes Berg authored
The type argument to DEBUGFS_ADD() isn't used and can be removed, it's around from before the conversion to debugfs_remove_recursive(). Signed-off-by:
Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Lennert Buytenhek authored
Since commit "mwl8k: handle station database update for AP's sta entry via ->sta_notify()", mwl8k every now and then gets a command timeout when ifconfig'ing a STA interface down. This turns out to be due to mwl8k_stop() being called while the work queue item that was scheduled by mwl8k_sta_notify() to remove the STA entry for the associated AP is still queued, and the former disables interrupts so that when the latter eventually runs, a command completion interrupt is never seen. Fix this by changing ieee80211_stop_device() so that the workqueue is flushed before drv_stop() is called, instead of doing it the other way around as is done now. (As ->stop() is allowed to sleep, there isn't any reason for drivers to queue work from within it.) Signed-off-by:
Lennert Buytenhek <buytenh@marvell.com> Signed-off-by:
-
Joe Perches authored
Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
H Hartley Sweeten authored
void pointers do not need to be cast to other pointer types. Signed-off-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by:
Zhu Yi <yi.zhu@intel.com> Cc: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by:
-
Wey-Yi Guy authored
When setting invalid byte count in txq byte count table, read pointer should be used instead of write pointer. Reported-by:
Guo, Chaohong <chaohong.guo@intel.com> Signed-off-by:
Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by:
Reinette Chatre <reinette.chatre@intel.com> Signed-off-by:
-
Wey-Yi Guy authored
"RADAR_NOTIFICATION" host command is not used and not supported by uCode, remove it from driver code. Signed-off-by:
-
Wey-Yi Guy authored
Update data structure to match latest statistics report from uCode. Signed-off-by:
-
Wey-Yi Guy authored
mac80211 do not check the return code now, what if mac80211 does start using the return code? IEEE80211_AMPDU_TX_OPERATIONAL is a valid action, just iwlwifi driver do not need to take any action for it; so instead of return "-EINVAL", it is a good program practice to return "-EOPNOTSUPP" to make sure mac80211 will not get wrong impression. Signed-off-by:
-
Johannes Berg authored
sparse pointed out that I made a mistake converting the return value of ieee80211_assoc_success to bool, this place should return false instead of one of the enum values (which would be true). Signed-off-by:
-
Lennert Buytenhek authored
Like how TX reclaim is done in a tasklet, move receive processing to tasklet context as well. This can have nice benefits for CPU utilisation and throughput, especially at 3-stream rates. (Use the same CLEAR_SEL trick as the TX reclaim tasklet does, to avoid having to touch the interrupt mask registers.) Signed-off-by:
-
Lennert Buytenhek authored
By making use of the CLEAR_SEL feature of the mwl8k host interface interrupt controller, we can keep the TX_DONE interrupt source masked while the transmit reclaim tasklet is running (NAPI style) without having to touch the interrupt controller's interrupt mask register when entering or exiting polling mode, and without having to do any more register reads/writes than we do now. When CLEAR_SEL is enabled on the TX_DONE interrupt source, reading the interrupt status register will clear the TX_DONE status bit if it was set, allowing it to be set again if a new TX_DONE event arrives while we are running the TX reclaim tasklet, but such a new event will then not trigger another PCI interrupt until a zero is written to the TX_DONE interrupt status register bit. I.e., if we write a zero to the TX_DONE interrupt source bit in the interrupt status register when the TX reclaim tasklet thinks it's done, a PCI interrupt will be triggered if a new TX_DONE event arrived from the hardware between us deciding that there is no more work to do and re-enabling the TX_DONE interrupt source, thereby avoiding the classic NAPI poll mode exit race that would otherwise occur. Signed-off-by:
-
Lennert Buytenhek authored
Add a limit argument to mwl8k_txq_reclaim(), to allow limiting the number of packets that it will reclaim, and make it return the number of packets that it reclaimed. Signed-off-by:
-
Lennert Buytenhek authored
Add support for creating AP interfaces, and enabling beaconing. This allows running a basic AP (11b/g mode only for now). Signed-off-by:
-
Lennert Buytenhek authored
Signed-off-by:
-
Lennert Buytenhek authored
STA firmware uses UPDATE_STADB to manipulate the hardware station database, whereas AP firmware uses SET_NEW_STN -- this implements the latter, and hooks it into mwl8k_sta_notify(), to be used if we're running on AP firmware. Signed-off-by:
-
Lennert Buytenhek authored
As with the STA version, unicast will use auto rate adaptation, but the AP version allows setting the rates to be used for management and multicast transmissions, which can be set based on the BSS basic rate set. Signed-off-by:
-
Lennert Buytenhek authored
As we always use the auto rate adaptation feature and never pass in a rate table, USE_FIXED_RATE can be simplified somewhat. While we're at it, rename it to *_sta, as this is the STA version of the command. Signed-off-by:
-
Lennert Buytenhek authored
While it is reasonable to expect that at least one transmit ring entry will be processed per second while we are waiting for the transmit rings to drain, the firmware can end up doing batching of transmit ring status writeback, which means that the transmit rings can appear stuck for more than a second at a time. Bump the TX drain wait timeout up from 1 to 5 seconds to account for this. Signed-off-by:
-
Lennert Buytenhek authored
The comment and code in mwl8k_cmd_set_edca_params() suggest that the mapping between SET_EDCA_PARAMS queue numbers and transmit rings isn't actually 1:1, while tests show that the mapping is in fact 1:1. So, get rid of the transmit queue 0/1 swapping. Signed-off-by:
-
Lennert Buytenhek authored
Signed-off-by:
-
Felix Fietkau authored
If frames are transmitted on 4-addr ap vlan interfaces with no station, they end up being transmitted unencrypted, even if the ap interface uses WPA. This patch add some sanity checking to make sure that this does not happen. Signed-off-by:
Felix Fietkau <nbd@openwrt.org> Cc: stable@kernel.org Signed-off-by:
-
Felix Fietkau authored
Since the per-vif station changes, sta_info_get on the ap sdata no longer returns entries for stations on ap vlans. This causes issues with hostapd, which currently always passes the ap interface name to nl80211 calls. This patch provides bug compatibility with the earlier versions until hostapd is fixed. Signed-off-by:
-
Felix Fietkau authored
To detect incoming 4-addr stations, hostapd needs to receive a 4-addr data frame from the remote station, so that it can create the AP VLAN for it. With this patch, the mlme code emits a 4-addr nullfunc frame immediately after assoc. On the AP side it also drops 4-addr nullfunc frames to the cooked monitor mode interface, if the interface hasn't been fully set up to receive 4-addr data frames yet. Signed-off-by:
-
Sujith authored
mac80211 passes appropriate flags indicating whether monitor mode is being used. Use this to set the HW opmode. Signed-off-by:
Sujith <Sujith.Manoharan@atheros.com> Signed-off-by:
-
Sujith authored
This file can be used to track frame reception errors. PHY error counts are also added. Location: ath9k/phy#/recv Signed-off-by:
-
Sujith authored
The TX queues have to be stopped during an internal reset. Not handling this would result in packet loss - fix this. Signed-off-by:
-
Sujith authored
The device initialization and termination functions were messy and convoluted. Introduce helper functions to clarify init_softc() and simplify things in general. Signed-off-by:
-
Sujith authored
sc_flags has slowly become a kitchen sink over time. Move powersave related flags to a separate variable. Signed-off-by:
-
Sujith authored
Move initialization/de-initialization related code to this file. Signed-off-by:
-
Sujith authored
Move all LED/RFKILL/BTCOEX related code to gpio.c Signed-off-by:
-
Luis R. Rodriguez authored
This enhances the way we parse country IEs to minimize the number of regulatory rules that we create. It also fixes our current implementation which treated country IE triplets with only one channel as one independed regulatory rule even though adjecent rules were also being provided. Without this patch APs which send country IE information with a channel triplet for each individual channel will force cfg80211 to deny HT40 operation as a regulatory rule would have been created independently for each channel and as such configured only for 20 MHz operation. Although 802.11n APs which send country IEs triplets in this fassion are likely rare Benoit reports this against the Ubiquity NanoStation M5, with Country "FR" and HT40 enabled. Since we now have a helper which parses the triplets in intermediate steps we now take care extra care to process padding. Reported-by:
Benoit PAPILLAULT <benoit.papillault@free.fr> Signed-off-by:
Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by:
-
Luis R. Rodriguez authored
The max power from each country IE triplet was being ignored. This fix isn't critical as CRDA was always being used for the lower limit, but we should process it in case the AP still wants to decrease power output even more for whatever reason. Reported-by:
-
Luis R. Rodriguez authored
Signed-off-by:
-
Rafał Miłecki authored
Signed-off-by:
Rafał Miłecki <zajec5@gmail.com> Signed-off-by:
-
Johannes Berg authored
Kalle and Lennert reported problems with the new work code, and at least Kalle's problem I was able to trace to a missing jiffies initialisation. I also ran into a problem where occasionally I couldn't connect, which seems fixed with kicking the work items after scanning. Finally, also add some sanity checking code to verify that we're not adding work items while an interface is down -- that case could lead to something similar to what Lennert was seeing. There still seems to be a race condition that we're trying to figure out separately. Signed-off-by:
Kalle Valo <kalle.valo@iki.fi> Signed-off-by:
-
Jouni Malinen authored
Store information elements from Beacon and Probe Response frames in separate buffers to allow both sets to be made available through nl80211. This allows user space applications to get access to IEs from Beacon frames even if we have received Probe Response frames from the BSS. Previously, the IEs from Probe Response frames would have overridden the IEs from Beacon frames. This feature is of somewhat limited use since most protocols include the same (or extended) information in Probe Response frames. However, there are couple of exceptions where the IEs from Beacon frames could be of some use: TIM IE is only included in Beacon frames (and it would be needed to figure out the DTIM period used in the BSS) and at least some implementations of Wireless Provisioning Services seem to include the full IE only in Beacon frames). The new BSS attribute for scan results is added to allow both the IE sets to be delivered. This is done in a way that maintains the previously used behavior for applications that are not aware of the new NL80211_BSS_BEACON_IES attribute. Signed-off-by:
Jouni Malinen <j@w1.fi> Acked-by:
-
Kalle Valo authored
In various cases wl1251_op_bss_info_changed() did not call elp_sleep() after an error was noticed. Fix it by using correct goto label. The bug was a theoretical one, in practise it doesn't matter because if commands start returning errors there will be lots of other problems. Signed-off-by:
Kalle Valo <kalle.valo@nokia.com> Signed-off-by:
-
Kalle Valo authored
The number of channels to be used in scan was hard coded in wl1251. The proper way is to use the channels array provided by mac80211. Signed-off-by:
-
Kalle Valo authored
Instead of creating the template in driver, get it from mac80211 instead. Thanks to this, three functions can be now removed. Signed-off-by:
-
Kalle Valo authored
The current scanning code wasn't following the preferred style. Move code related to scan and trigger scan to commans to wl1251_cmd.c. Because there's now less code in wl1251_hw_scan(), the function can be now merged with wl1251_op_hw_scan(). Signed-off-by:
-
