- 10 Oct, 2007 40 commits
-
-
Hans Verkuil authored
ivtv: set correct pixel format and alpha properties in VIDIOC_G_FBUF Signed-off-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab@infradead.org>
-
Hans Verkuil authored
Support for V4L2_ENC_CMD_STOP_AT_GOP_END was broken. While the driver correctly waited for the card to capture until the GOP was complete, afterwards the driver buffers were just flushed instead of waiting for the application to read all the pending data. Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
- add guards - remove unused header includes - move card-specific stuff from ivtv-driver.h to ivtv-cards.h - move YUV-specific stuff from ivtv-driver.h to ivtv-yuv.h Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
The driver should now pass the 'busy' state of the device to the cx2341x module whenever controls are set or tried. -EBUSY will be returned if the device is busy and the user attempts to modify certain 'dangerous' controls. It concerns controls that change the audio or video compression mode and bitrates. The cx88-blackbird and pvrusb2 drivers currently always pass '0' (not busy) to the cx2341x, effectively keeping the old behavior for now. Signed-off-by:
-
Hans Verkuil authored
Changing the VBI format requires a CX2341X_ENC_INITIALIZE_INPUT firmware call. This can only be done if no capture is in progress. So return -EBUSY if the encoder is busy. Signed-off-by:
-
Hans Verkuil authored
- Always clear when stopping the decoder - Clear if the filehandle that is being close was used for UDMA_YUV output. Signed-off-by:
-
Trent Piepho authored
The driver has long claimed to support mmap, but it didn't work at all. Some of the dma buffer parameters weren't set, and since video_buf uses vmalloc to allocate the buffer, a page callback is needed too. Signed-off-by:
Trent Piepho <xyzzy@speakeasy.org> Signed-off-by:
-
Trent Piepho authored
The driver kepts a static global array of snd_card pointers for each card probed, which was never used. Signed-off-by:
-
Trent Piepho authored
Rework the way the DMA buffer is handled and IRQs are generated. ALSA uses a ring-buffer of multiple periods. Each period is supposed to corrispond to one IRQ. The existing driver was generating one interrupt per ring-buffer, as opposed to per period. This meant that as soon as the IRQ was generated, the hardware was already starting to re-write the beginning of the buffer. Since the DMA happens on a per-line basis, there was only a narrow window to copy the data out before the buffer was overwritten. The cx88 core RISC program generator is modified so that it can set the IRQ and counter flags to count every X lines of DMA transfer. This way we can generate an interrupt every period instead of every full ring-buffer. Right now only period of one line are supported, but it should be possible to support longer periods. Note that a WRITE instruction generates an IRQ when it starts, not when the transfer is finished. Thus to generate an IRQ when line X is done, one must set the IRQ flag on the instruction that starts line X+1, not the one that ends line X. Change the line size so that there are four lines in the SRAM FIFO. If there are not four lines, the analog output from the cx88's internal DACs is full of clicks and pops. Try to handle FIFO sync errors. Sometimes the chip generates many of these errors before audio data starts. Up to 50 sync errors will be ignored and the counter reset. Have the IRQ handler save the RISC counter to the chip struct, and then have the pointer callback use this to calculate the pointer position. We could read the counter from the pointer callback, but sometimes the sync errors on start up cause the counter to go crazy. ALSA sees this and thinks there has been an overrun. The IRQ hander can avoid saving the counter position on sync errors. The chip "opened" flag wasn't necessary. ALSA won't try to open the same substream multiple times. Probably this code was cut&pasted from the bt87x driver, which has multiple sub-streams for one chip. Do error checking for the videobuf mapping functions. snd_card_cx88_runtime_free() is useless and can be deleted. Signed-off-by:
-
Trent Piepho authored
When the risc instrunctions from the CMDS were printed, instruction arguments weren't taken into account. This changes output like: cx88[0]: risc0: 0x1d010400 [ write sol eol irq1 cnt0 count=1024 ] cx88[0]: risc1: 0x0cac2800 [ INVALID sol eol 23 21 19 18 13 count=2048 ] cx88[0]: risc2: 0x1d010400 [ write sol eol irq1 cnt0 count=1024 ] cx88[0]: risc3: 0x0cac2c00 [ INVALID sol eol 23 21 19 18 13 count=3072 ] cx88[0]: risc0: 0x1d010400 [ write sol eol irq1 cnt0 count=1024 ] cx88[0]: risc1: 0x0cac2800 [ arg #1 ] cx88[0]: risc2: 0x1d010400 [ write sol eol irq1 cnt0 count=1024 ] cx88[0]: risc3: 0x0cac2c00 [ arg #1 ] Signed-off-by:
-
Jean Delvare authored
Convert the initialization of ivtv_i2c_algo_template to C99-style. Otherwise a future change to struct i2c_algo_bit_data would break this code. Also declared that structure const - it's a template after all. Signed-off-by:
Jean Delvare <khali@linux-fr.org> Signed-off-by:
-
Mauro Carvalho Chehab authored
Since at least kernel 2.6.12-rc2, module.h includes moduleparm.h. This patch removes all occurences of moduleparm.h from drivers/media files. Signed-off-by: -
Michal Piotrowski authored
Signed-off-by:
Michal Piotrowski <michal.k.k.piotrowski@gmail.com> Signed-off-by:
-
Michal Piotrowski authored
Signed-off-by:
-
Michal Piotrowski authored
Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
Michael Krufky <mkrufky@linuxtv.org> Signed-off-by:
-
Michael Krufky authored
The file, tuner-driver.h was originally named tuner-hw.h, but we decided to rename it. At the time, I had forgotten to change the #ifdef __TUNER_HW_H__ to #ifdef __TUNER_DRIVER_H__ . This patch corrects that. Signed-off-by:
-
Edgar Simo authored
Add DVB-T support for Avermedia Super 007 Analog television is untested. The device lacks input adapters for radio, svideo & composite -- seems to be a DVB-T ONLY device. Signed-off-by:
Edgar Simo <bobbens@gmail.com> Acked-by:
Hermann Pitton <hermann-pitton@arcor.de> Signed-off-by:
-
Edgar Simo authored
This is a simple whitespace cleanup. Signed-off-by:
-
Trent Piepho authored
The revision is part of the pci_dev struct, so there is no need to read it in. Stop storing the revision and latency in the chip struct, since they're never used after being printed out when the driver loads. linux/pci.h wasn't included. It was getting picked up something else, probably cx88.h, but this file uses struct pci_dev so it should include pci.h. Signed-off-by:
-
Trent Piepho authored
channels_min should be 2, not 1. The hardware only supports stereo. Signed-off-by:
-
Trent Piepho authored
Currently the driver turns on audio interrupts, then sets the audio interrupt mask to select which interrupts to get. One could received unwanted interrupts since the mask is set _after_ interrupts have already been turned on. Change the order of the operations, and clear any audio interrupt status bits that are already set for good measure. Before changing the SRAM FIFO parameters, make sure the FIFO isn't being used. This shouldn't happen with just the ALSA driver, as it should never try to turn on FIFO/RISC/DMA while they are already on. However, the V4L driver needs to turn the audio FIFO on for analog audio output to work (undocumented cx88 bug). The FIFO parameters are in an inconsistent state while they are updated, and this results in many FIFO sync error IRQs if the FIFO is in use while it's in this inconsistent state. Also create and use a bunch of symbolic constants for audio interrupt mask bits. Signed-off-by:
-
Trent Piepho authored
When an irq handled by the cx88 core driver (currently IR and errors) occurs and the cx88-alsa irq handler is the first called, it will claim to have handled the irq but it doesn't call cx88_core_irq() to handle it. The means loading cx88-alsa can disable the IR remote. Signed-off-by:
-
Trent Piepho authored
Used for the PCI_INTMSK and PCI_INT_STAT registers. Signed-off-by:
-
Hans Verkuil authored
Add VIDIOC_OVERLAY to enable/disable the OSD. Also add the OSD state to the log status report. Signed-off-by:
-
Hans Verkuil authored
The return value of ivtv_udma_fill_sg_list() was changed by the highmem bugfix, but that return value was still used in ivtv-yuv.c. Revert to the old return value, but in addition return -1 in case of a memory allocation error. Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
When trying to DMA userspace buffers to the cx23415 you need to check whether the page is in highmem. If this is the case, then bounce buffers have to be used to allow DMA. Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Serialization is now done on the open/close/ioctl level and also when the read/write/poll start an encoder/decoder stream. Signed-off-by:
-
Hans Verkuil authored
- add FILE debug flag for open/close/read/write/poll. - show cmd for encoder/decoder command ioctl. Signed-off-by:
-
Hans Verkuil authored
Some streams (PCM, VBI decoding) do not need that much memory, so specify the allocated memory in kB instead of MB to limit memory usage. E.g. 1 MB is overkill for the VBI decoding stream, 64 kB is enough. Signed-off-by:
-
Hans Verkuil authored
The TV output standard was set only on first use, which meant that the saa7127 was set to NTSC until then, leading to flickering on PAL systems. Since the saa7127 has no firmware it is OK to initialize it immediately. Signed-off-by:
-
Hans Verkuil authored
Whenever the 0x80b register is used the microcontroller should be reset. Signed-off-by:
-
Hans Verkuil authored
- Give up frame after three retries. - When the last capture/decode ends, make sure to delete the dma_timer. Signed-off-by:
-
