- 05 Feb, 2013 21 commits
-
-
Peter Senna Tschudin authored
replace: #if defined(CONFIG_INPUT) || \ defined(CONFIG_INPUT_MODULE) with: #if IS_ENABLED(CONFIG_INPUT) This change was made for: CONFIG_INPUT Reported-by:Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by:
Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Peter Senna Tschudin authored
replace: #if defined(CONFIG_INPUT) || \ defined(CONFIG_INPUT_MODULE) with: #if IS_ENABLED(CONFIG_INPUT) This change was made for: CONFIG_INPUT Reported-by: -
Peter Senna Tschudin authored
replace: #if defined(CONFIG_INPUT) || \ defined(CONFIG_INPUT_MODULE) with: #if IS_ENABLED(CONFIG_INPUT) This change was made for: CONFIG_INPUT Reported-by: -
Peter Senna Tschudin authored
replace: #if defined(CONFIG_INPUT) || \ defined(CONFIG_INPUT_MODULE) with: #if IS_ENABLED(CONFIG_INPUT) This change was made for: CONFIG_INPUT Reported-by: -
Peter Senna Tschudin authored
replace: #if defined(CONFIG_INPUT) || \ defined(CONFIG_INPUT_MODULE) with: #if IS_ENABLED(CONFIG_INPUT) This change was made for: CONFIG_INPUT Reported-by: -
Peter Senna Tschudin authored
replace: #if defined(CONFIG_INPUT) || \ defined(CONFIG_INPUT_MODULE) with: #if IS_ENABLED(CONFIG_INPUT) This change was made for: CONFIG_INPUT Reported-by: -
Peter Senna Tschudin authored
replace: #if defined(CONFIG_INPUT) || \ defined(CONFIG_INPUT_MODULE) with: #if IS_ENABLED(CONFIG_INPUT) This change was made for: CONFIG_INPUT Reported-by: -
Peter Senna Tschudin authored
replace: #if defined(CONFIG_USB_SI470X) || \ defined(CONFIG_USB_SI470X_MODULE) with: #if IS_ENABLED(CONFIG_USB_SI470X) This change was made for: CONFIG_USB_SI470X, CONFIG_I2C_SI470X Reported-by: -
Johannes Schellen authored
This patch fixes a bug which causes all histogram regions to start in the top left corner of the image. The histogram region coordinates are 16 bit values which share a 32 bit register. The bug is due to the region end value assignments overwriting the region start values with zero. Signed-off-by:
Johannes Schellen <Johannes.Schellen@rwth-aachen.de> Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Laurent Pinchart authored
Replace kzalloc, request_mem_region, ioremap, clk_get and regulator_get with their devm_* managed replacement. Signed-off-by:
Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by:
-
Laurent Pinchart authored
kzalloc initializes the memory it allocates to 0, there's no need for an explicit memset. Signed-off-by:
-
Laurent Pinchart authored
The preview engine includes filters that consume columns and lines as part of their operation, thus resulting in a cropped image. To allow turning those filters on/off during streaming without affecting the output image size, the driver adds additional cropping to make the total number of cropped columns and lines constant regardless of which filters are enabled. This process needlessly includes the CFA filter, as whether the filter is enabled only depends on the sink pad format, which can't change during streaming. Exclude the CFA filter from the preview engine margins. Signed-off-by:
-
Oliver Neukum authored
Ming Lei reported: IMO, there is a minor fault in the error handling path of uvc_status_start() inside uvc_v4l2_open(), and the 'users' count should have been decreased before usb_autopm_put_interface(). In theory, a [URB resubmission] warning can be triggered when the device is opened just between usb_autopm_put_interface() and atomic_dec(&stream->dev->users). The fix is trivial. Reported-by:
Ming Lei <tom.leiming@gmail.com> Signed-off-by:
Oliver Neukum <oneukum@suse.de> Signed-off-by:
-
Ezequiel Garcia authored
This kind of memcpy() is error-prone. Its replacement with a struct assignment is prefered because it's type-safe and much easier to read. Signed-off-by:
Ezequiel Garcia <elezegarcia@gmail.com> Signed-off-by:
-
Wei Yongjun authored
Add the missing unlock on the error handling path in function vpbe_initialize(). Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by:
Prabhakar Lad <prabhakar.lad@ti.com> Signed-off-by:
-
Lad, Prabhakar authored
drivers/media/platform/davinci/dm355_ccdc.c:593:9: warning: ‘val1’ may be used uninitialized in this function [-Wuninitialized] drivers/media/platform/davinci/dm355_ccdc.c:560:6: note: ‘val1’ was declared here This is a false positive but the compiler has no way to know about it, so initialize the variable to 0. Signed-off-by:
-
Lad, Prabhakar authored
I2C drivers can use devm_kzalloc() too in their .probe() methods. Doing so simplifies their clean up paths. Signed-off-by:
Manjunath Hadli <manjunath.hadli@ti.com> Acked-by:
-
Lad, Prabhakar authored
I2C drivers can use devm_kzalloc() too in their .probe() methods. Doing so simplifies their clean up paths. Signed-off-by:
-
Lad, Prabhakar authored
I2C drivers can use devm_kzalloc() too in their .probe() methods. Doing so simplifies their clean up paths. Signed-off-by:
-
Lad, Prabhakar authored
I2C drivers can use devm_kzalloc() too in their .probe() methods. Doing so simplifies their clean up paths. Signed-off-by:
-
Paul Bolle authored
Compiling the saa7164 driver without CONFIG_VIDEO_ADV_DEBUG set triggers these GCC warnings: drivers/media/pci/saa7164/saa7164-encoder.c:1301:12: warning: ‘saa7164_g_register’ defined but not used [-Wunused-function] drivers/media/pci/saa7164/saa7164-encoder.c:1314:12: warning: ‘saa7164_s_register’ defined but not used [-Wunused-function] Silence these warnings by wrapping these two functions in an "#ifdef CONFIG_VIDEO_ADV_DEBUG" and "#endif" pair. Signed-off-by:Paul Bolle <pebolle@tiscali.nl> Signed-off-by:
-
- 01 Feb, 2013 1 commit
-
-
Alexandre Lissy authored
Events for the iMon Knob pad where not correctly interpreted on ARM, resulting in buggy mouse movements (cursor going straight out of the screen), key pad only generating KEY_RIGHT and KEY_DOWN events. A reproducer is: int main(int argc, char ** argv) { char rel_x = 0x00; printf("rel_x:%d @%s:%d\n", rel_x, __FILE__, __LINE__); rel_x = 0x0f; printf("rel_x:%d @%s:%d\n", rel_x, __FILE__, __LINE__); rel_x |= ~0x0f; printf("rel_x:%d @%s:%d\n", rel_x, __FILE__, __LINE__); return 0; } (running on x86 or amd64) $ ./test rel_x:0 @test.c:6 rel_x:15 @test.c:7 rel_x:-1 @test.c:8 (running on armv6) rel_x:0 @test.c:6 rel_x:15 @test.c:7 rel_x:255 @test.c:8 Forcing the rel_x and rel_y variables as signed char fixes the issue. Reference: http://www.arm.linux.org.uk/docs/faqs/signedchar.phpSigned-off-by:Alexandre Lissy <alexandrelissy@free.fr> Signed-off-by:
-
- 24 Jan, 2013 7 commits
-
-
Mauro Carvalho Chehab authored
* v4l_for_linus: (464 commits) [media] uvcvideo: Set error_idx properly for S_EXT_CTRLS failures [media] uvcvideo: Cleanup leftovers of partial revert [media] uvcvideo: Return -EACCES when trying to set a read-only control Linux 3.8-rc3 mm: reinstante dropped pmd_trans_splitting() check cred: Remove tgcred pointer from struct cred drm/ttm: fix fence locking in ttm_buffer_object_transfer ARM: clps711x: Fix bad merge of clockevents setup ARM: highbank: save and restore L2 cache and GIC on suspend ARM: highbank: add a power request clear ARM: highbank: fix secondary boot and hotplug ARM: highbank: fix typos with hignbank in power request functions ARM: dts: fix highbank cpu mpidr values ARM: dts: add device_type prop to cpu nodes on Calxeda platforms drm/prime: drop reference on imported dma-buf come from gem xen/netfront: improve truesize tracking ARM: mx5: Fix MX53 flexcan2 clock ARM: OMAP2+: am33xx-hwmod: Fix wrongly terminated am33xx_usbss_mpu_irqs array sctp: fix Kconfig bug in default cookie hmac selection EDAC: Cleanup device deregistering path ... Conflicts: drivers/media/pci/dm1105/dm1105.c drivers/media/platform/soc_camera/mx2_camera.c
-
Andreas Regel authored
Sometimes there is a problem when trying to access the non-existing registers of the second demodulator path on the STV0903. This change removes the calls in case the driver is used on a STV0903. Signed-off-by:
Andreas Regel <andreas.regel@gmx.de> Acked-by:
Manu Abraham <manu@linuxtv.org> Signed-off-by:
-
Mauro Carvalho Chehab authored
If, for any reason, all per-layers counters stop, remove the corresponding global counter. Signed-off-by: -
Mauro Carvalho Chehab authored
The logic here is similar to the preBER. Signed-off-by: -
Mauro Carvalho Chehab authored
The logic that resets the device is wrong. It should be resetting just the layer that got read. Also, stop is needed before updating the counters. Signed-off-by: -
Mauro Carvalho Chehab authored
The logic that resets the device is wrong. It should be resetting just the layer that got read. Also, stop is needed before updating the counters. While there, rename it, as we'll soon introduce a postBER logic there. Signed-off-by: -
Mauro Carvalho Chehab authored
Add both per-layer and global block error count and block count, for PER and UCB measurements. Signed-off-by:
-
- 23 Jan, 2013 8 commits
-
-
Mauro Carvalho Chehab authored
If userspace calls a property that doesn't exist, it currently just returns -EINVAL. However, this is more likely a problem at the userspace application, calling it with a non-existing property. So, add a debug message to help tracking it. Signed-off-by: -
Mauro Carvalho Chehab authored
Add Signal/Noise ratio measurement. On this device, a global measure is taken by the demod. It also provides per-layer CNR measurements, based on Modulation Error measures (MER). Reviewed-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Mauro Carvalho Chehab authored
Do a better job on setting the bit error counters, in order to have all layer measures to happen in a little less than one second. Reviewed-by:
-
Mauro Carvalho Chehab authored
Add the methods to read bit error/bit count measurements from mb86a20s. On ISDB-T devices, those reads are done per layer. However, as userspace applications may not be aware of that, add a global measure that will sum the bit errors and bit counts for each layer, storing them into a global value. Reviewed-by:
-
Mauro Carvalho Chehab authored
Instead of providing separate callbacks to read the several FE stats properties, the better seems to use just one method that will: - Read lock status; - Read signal strength; - if locked, get TMCC data; - if locked, get DVB statistics. As the DVB frontend thread will call this read_status callback on every 3 seconds, and userspace can even call it earlier, all stats data and layers layout will be updated together if available, with is a good thing. Reviewed-by: -
Mauro Carvalho Chehab authored
Add the logic to poll, reset counters and report the QoS stats to the end user. The idea is that the core will periodically poll the frontend for the stats. The frontend may return -EBUSY, if the previous collect didn't finish, or it may fill the cached data. The value returned to the end user is always the cached data. Reviewed-by:
-
Mauro Carvalho Chehab authored
The DVBv3 statistics parameters are limited on several ways: - It doesn't provide any way to indicate the used measure, so userspace need to guess how to calculate/use it; - Only a limited set of stats are supported; - Can't be called in a way to require them to be filled all at once (atomic reads from the hardware), with may cause troubles on interpreting them on userspace; - On some OFDM delivery systems, the carriers can be independently modulated, having different properties. Currently, there's no way to report per-layer stats. To address the above issues, adding a new DVBv5-based stats API. While here, correct inner code nomenclature on a few places. Reviewed-by: -
Mauro Carvalho Chehab authored
As reported by Feng's kbuild test: From: kbuild test robot <fengguang.wu@intel.com> Subject: drivers/media/dvb-frontends/mb86a20s.c:706 mb86a20s_attach() error: potential null dereference 'state'. (kzalloc returns null) Date: Wed, 23 Jan 2013 19:30:43 +0800 commit: f66d81b5 [media] mb86a20s: convert it to use dev_info/dev_err/dev_dbg drivers/media/dvb-frontends/mb86a20s.c:706 mb86a20s_attach() error: potential null dereference 'state'. (kzalloc returns null) drivers/media/dvb-frontends/mb86a20s.c:706 mb86a20s_attach() error: we previously assumed 'state' could be null (see line 705) As, at mb86a20s_attach(), we have an i2c pointer, use it for all printk messages there, instead of state->i2c. Signed-off-by:
-
- 22 Jan, 2013 3 commits
-
-
Mauro Carvalho Chehab authored
Instead of having its own set of macros, use the Kernel default ones for debug, error and info. While here, do some cleanup on the debug printk's. Signed-off-by: -
Mauro Carvalho Chehab authored
Reorder functions to have everything related to stats/status read close. That will make the file more organized as other stats routines will be added. No functional changes. Signed-off-by: -
Mauro Carvalho Chehab authored
Split the logic that reads the status from the DVB callback. That helps to properly return an error code, if status read fails. Signed-off-by:
-
