- 04 Apr, 2017 1 commit
-
-
Maxime Ripard authored
Add the git tree where the sun4i-drm patches are hosted. Signed-off-by:Maxime Ripard <maxime.ripard@free-electrons.com>
-
- 09 Mar, 2017 6 commits
-
-
Chen-Yu Tsai authored
sun4i_layer only controls the backend hardware block of the display pipeline. Pass pointers to the underlying backend in the layer init function, instead of trying to fetch it from the drm_device structure. This avoids the headache of trying to figure out which device the layers actually belong to. Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
-
Chen-Yu Tsai authored
sun4i_crtc controls the backend and tcon hardware blocks of the display pipeline. Pass pointers to the underlying devices into the crtc init function, instead of trying to fetch them from the drm_device structure. This avoids the headache of trying to figure out which devices the crtc is actually associated with. Signed-off-by:
-
Chen-Yu Tsai authored
The drm_encoder structure provides us with a pointer to the crtc currently tied to the encoder. Subsequently we can extract the tcon and backend pointers from our crtc structure, instead of getting it directly from the sun4i_drv structure. Signed-off-by:
-
Chen-Yu Tsai authored
A pointer to the underlying tcon of the crtc was added to the sun4i_crtc structure in "drm/sun4i: Add backend and tcon pointers to sun4i_crtc". However the crtc init function was still using the copy from sun4i_drv to set drm_crtc.port. This was an oversight when the patches were reordered. Switch to using the embedded tcon pointer to get the tcon's ouptut port and assign it to drm_crtc.port. This makes it possible to remove the usage of sun4i_drv completely in subsequent patches. Signed-off-by:
-
Chen-Yu Tsai authored
The backporch programmed into the tcon registers is actually the backporch + hsync length from the display timings, as indicated in the interface timing diagrams found in the user manual of the A31 and A33 SoCs. The comments for channel 0 mistakenly describe the discrepancy as TCON backporch = frontporch + hsync. Signed-off-by:
-
Chen-Yu Tsai authored
The TCON driver calls sun4i_tcon_init_regmap and sun4i_tcon_init_clocks in its bind function. The former creates a regmap and writes to several register to clear its configuration to a known default. The latter initializes various clocks. This includes enabling the bus clock for register access and creating the dotclock. In order for the first step's writes to work, the bus clock must be enabled which is done in the second step. but the dotclock's ops use the regmap created in the first step. Rearrange the function calls such that the clocks are initialized before the regmap, and split out the dot clock creation to after the regmap is initialized. Fixes: 9026e0d1 ("drm: Add Allwinner A10 Display Engine support") Signed-off-by:
-
- 07 Mar, 2017 19 commits
-
-
Maxime Ripard authored
Allow to provide an optional memory region to allocate from for our DRM driver. Signed-off-by: -
Chen-Yu Tsai authored
sun4i_crtc controls the backend and tcon hardware blocks of the display pipeline. Instead of doing so through the master drm structure, leave pointers to the corresponding backend and tcon in itself. Also drop the drm_device pointer, since it is no longer needed. The next step forward would be to pass the pointers in through sun4i_crtc_init as parameters. This would make it easier to support multiple display pipelines layer on. Signed-off-by:
-
Chen-Yu Tsai authored
sun4i_layer only controls the backend hardware block of the display pipeline. Instead of getting a pointer to the underlying backend through the drm_device structure, leave one in itself. Also drop the drm_device pointer, since it is no longer needed. The next step forward would be to pass the pointer in through sun4i_layers_init as a parameter. This would make it easier to support multiple display pipelines layer on. Signed-off-by:
-
Chen-Yu Tsai authored
The RGB encoder represents channel 0 of the TCON. Instead of fetching the pointer to its TCON from the main sun4i_drv structure, pass it in as part of the init call, save it, and use it directly in the encoder and connector callbacks. We can also drop the otherwise unused sun4i_drv pointer. Signed-off-by:
-
Chen-Yu Tsai authored
Now that the crtcs have their .port field set properly, we can use drm_of_find_possible_crtcs to find the connected crtcs, instead of hardcoding the first crtc as usable. The new code also defers binding when the upstream crtc hasn't been registered yet. This makes it easier to support multiple tcons/crtcs. Signed-off-by:
-
Chen-Yu Tsai authored
To support multiple display pipelines, we would have multiple crtcs, with one or more planes bound to them. Obviously having hardcoded values for the drm_plane .possible_crtcs field is not going to work. For primary and cursor planes, the value is set by drm_crtc_init_with_planes. We just need to set it for overlay planes. We also fix the value set for the RGB encoder, by referencing the crtc set in sun4i_drv. Signed-off-by:
-
Chen-Yu Tsai authored
The current layer init code keeps a pointer to the primary plane layer in sun4i_drv. When we eventually support multiple display pipelines, this would force us to keep track of primary planes for all crtcs. And these pointers only get used at bind time. Instead, have the crtc init code iterate through the returned layers to find the primary and cursor layers. And drop the pointer from the sun4i_drv structure. Signed-off-by:
-
Chen-Yu Tsai authored
The tcon provides part of the functionality of the crtc, and also provides the device node for the output port of the crtc. To be able to use drm_of_find_possible_crtcs(), all crtc must be initialized before any downstream encoders. The other part of the crtc is the display backend. The Rockchip DRM driver does this by first binding all vops, which is their crtc, and this step also creates the crtc objects. Then all remaining hardware components are bound. With the Allwinner display pipeline, we have multiple components comprising the crtc, and varying depths of the display pipeline. Since components are added with a depth first search of the of_graph, we can initialize the crtc object within the tcon bind function. Since the backend precedes the tcon, and the backends cannot be muxed or switched around, we can be sure that the associated backend is already initialized. This patch also moves the crtc pointer from the main drm_device data to the tcon device data. Besides the crtc callbacks, the crtc structure is only used within the tcon driver to signal vblank events from its interrupt handler. As the crtc and layer bits are now called from the tcon bits, we must move them from the sun4i-drm module to the sun4i-tcon module to avoid circular dependencies between the two modules. This is because sun4i-drm also calls into sun4i-tcon. Signed-off-by:
-
Chen-Yu Tsai authored
This patch moves the sun4i_layers_init call from sun4i_drv_bind to sun4i_crtc_init, and the layers pointer from struct sun4i_drv to struct sun4i_crtc. The layers are bound to a specific crtc, and they are not directly used once initiated. They are used through their included drm_plane structures. Moving the layers into the crtc facilitates binding them to the crtc explicitly, by setting the corresponding bit in their .possible_crtcs fields right after the crtc is initialized. This is done in a later patch. Signed-off-by:
-
Chen-Yu Tsai authored
The number of defined planes in sun4i_layer is unknown to other parts of the sun4i drm driver. Since the return value of sun4i_layers_init is a list of layers, make it return 1 more empty layer as an end of list guard value. Signed-off-by:
-
Chen-Yu Tsai authored
The way drm_of_find_possible_crtcs works is it tries to match the remote-endpoint of the given node's various endpoints to all the crtc's .port field. Thus we need to set drm_crtc.port to the output port node of the underlying TCON. Signed-off-by:
-
Chen-Yu Tsai authored
sunxi_rgb2yuv_coef is a table of RGB-to-YUV conversion coefficients. They are programmed into the hardware, and can be declared constant. Reported-by:
Priit Laes <plaes@plaes.org> Signed-off-by:
-
Chen-Yu Tsai authored
sun4i_crtc_init can fail for a number of reasons. Instead of returning a NULL pointer when it fails, pass back the encountered error using ERR_PTR. Signed-off-by:
-
Chen-Yu Tsai authored
sun4i_layers_init allocates an array to store pointers to newly created layers returned by sun4i_layer_init_one(), but fails to actually store them. But it actually returns the empty array to unsuspecting users. Save the pointers in the array, so that they may be used later. Signed-off-by:
-
Chen-Yu Tsai authored
The assignment found in the main loop in sun4i_layers_init: struct sun4i_layer *layer = layers[i]; is useless as it gets overwritten by the next line: layer = sun4i_layer_init_one(drm, plane); Drop the assignment. Signed-off-by:
-
Chen-Yu Tsai authored
In sun4i_layers_init we are allocating an array of pointers to struct sun4i_layer: layers = devm_kcalloc(drm->dev, ARRAY_SIZE(sun4i_backend_planes), sizeof(**layers), GFP_KERNEL); The element size should be the size of an individual element of the array. Change it to sizeof(*layers) to avoid wasting a lot of memory. Signed-off-by:
-
Chen-Yu Tsai authored
drm_vblank_init can fail due to insufficient memory. Ignoring the error and proceeding may cause the kernel to dereference an invalid pointer when vblank is enabled. Signed-off-by:
-
Chen-Yu Tsai authored
The master bind function calls numerous drm functions which initialize underlying structures. It also tries to bind the various components of the display pipeline, some of which may add additional drm objects. This patch adds proper cleanup functions in the error path of the master bind function. This requires the patch "drm/sun4i: Move drm_mode_config_cleanup call to main driver", which splits out drm_mode_config_cleanup from sun4i_framebuffer_free so we can call it separately. Signed-off-by:
-
Chen-Yu Tsai authored
drm_mode_config_cleanup is the complement of drm_mode_config_init, which is called in the bind function of sun4i_drv. drm_mode_config_cleanup should be put in the unbind function to match. Signed-off-by:
-
- 02 Mar, 2017 4 commits
-
-
Eric Anholt authored
If a CMA allocation failed, the partially constructed BO would be unreferenced through the normal path, and we might choose to put it in the BO cache. If we then reused it before it expired from the cache, the kernel would OOPS. Signed-off-by:
Eric Anholt <eric@anholt.net> Fixes: c826a6e1 ("drm/vc4: Add a BO cache.") Reviewed-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170301185602.6873-2-eric@anholt.net
-
Eric Anholt authored
The from_cache flag was actually "the BO is invisible to userspace", so we can repurpose it to just zero out a cached BO and return it to userspace. Improves wall time for a loop of 5 glsl-algebraic-add-add-1 by -1.44989% +/- 0.862891% (n=28, 1 outlier removed from each that appeared to be other system noise) Note that there's an intel-gpu-tools test to check for the proper zeroing behavior here, which we continue to pass. Signed-off-by:
-
Daniel Vetter authored
This reverts commit 233ce881. I assumed it's ok, but really should have double-checked - CI caught tons of fail :( Cc: Jani Nikula <jani.nikula@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Acked-by:
Manasi Navare <manasi.d.navare@intel.com> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170301171749.13053-1-daniel.vetter@ffwll.ch
-
Maxime Ripard authored
Implement legacy framebuffer ioctl FBIO_WAITFORVSYNC in the generic framebuffer emulation driver. Legacy framebuffer users like non kms/drm based OpenGL(ES)/EGL implementations may require the ioctl to synchronize drawing or buffer flip for double buffering. It is tested on the i.MX6. Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
- 01 Mar, 2017 10 commits
-
-
Gabriel Krisman Bertazi authored
Commit be7f735cd5ea ("drm: Rely on mode_config data for fb_helper initialization") dropped the num_crtc argument. Update the documentation to reflect that and prevent the kernel-doc warnings below: ./drivers/gpu/drm/drm_fb_cma_helper.c:557: warning: Excess function parameter 'num_crtc' description in 'drm_fbdev_cma_init' ./drivers/gpu/drm/drm_fb_cma_helper.c:558: warning: Excess function parameter 'num_crtc' description in 'drm_fbdev_cma_init' Fixes: be7f735cd5ea ("drm: Rely on mode_config data for fb_helper initialization") Signed-off-by:Gabriel Krisman Bertazi <krisman@collabora.co.uk> Signed-off-by:
-
Chris Zhong authored
Reference the power domain incase dw-mipi power down when in use. Signed-off-by:
Chris Zhong <zyw@rock-chips.com> Reviewed-by:
Sean Paul <seanpaul@chromium.org> Signed-off-by:
-
Chris Zhong authored
Set the lanes bps to 1 / 0.9 times of pclk, the margin is not enough for some panel, it will cause the screen display is not normal, so increases the badnwidth to 1 / 0.8. Signed-off-by:
-
Chris Zhong authored
Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Chris Zhong authored
The MIPI DSI do not need check the validity of resolution, the max resolution should depend VOP. Hence, remove rk3288_mipi_dsi_mode_valid here. Signed-off-by:
-
Chris Zhong authored
correct the coding style, according the checkpatch scripts Signed-off-by:
-
Chris Zhong authored
The vopb/vopl switch register of RK3399 mipi is different from RK3288, the default setting for mipi dsi mode is different too, so add a of_device_id structure to distinguish them, and make sure set the correct mode before mipi phy init. Signed-off-by:
Mark Yao <mark.yao@rock-chips.com> Reviewed-by:
-
Chris Zhong authored
The dw-mipi-dsi of rk3399 is almost the same as rk3288, the rk3399 has additional phy config clock. Signed-off-by:
-
John Keeping authored
In order to fully reset the state of the MIPI controller we must assert this reset. This is slightly more complicated than it could be in order to maintain compatibility with device trees that do not specify the reset property. Signed-off-by:
John Keeping <john@metanate.com> Reviewed-by:
-
John Keeping authored
Signed-off-by:
-
