- 25 Apr, 2010 40 commits
-
-
Joerg Roedel authored
This patch adds a tracepoint to get information about the most important intercept bitmasks from the nested vmcb. Signed-off-by:
Joerg Roedel <joerg.roedel@amd.com> Signed-off-by:
Avi Kivity <avi@redhat.com>
-
Joerg Roedel authored
A recent change broke tracing of the nested vmcb address. It was reported as 0 all the time. This patch fixes it. Signed-off-by:
-
Joerg Roedel authored
This patch implements the NMI intercept checking for nested svm. Signed-off-by:
-
Joerg Roedel authored
Without resetting the MMU the gva_to_pga function will not work reliably when the vcpu is running in nested context. Signed-off-by:
-
Joerg Roedel authored
This patch removes whitespace errors, fixes comment formats and most of checkpatch warnings. Now vim does not show c-space-errors anymore. Signed-off-by:
-
Jan Kiszka authored
Call directly into the vendor services for getting/setting rflags in emulate_instruction to ensure injected TF survives the emulation. Signed-off-by:
Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by:
-
Jan Kiszka authored
RF is not required for injecting TF as the latter will trigger only after an instruction execution anyway. So do not touch RF when arming or disarming guest single-step mode. Signed-off-by:
-
Jan Kiszka authored
When in guest debugging mode, we have to reinject those #BP software exceptions that are caused by guest-injected INT3. As older AMD processors do not support the required nRIP VMCB field, try to emulate it by moving RIP past the instruction on exception injection. Fix it up again in case the injection failed and we were able to catch this. This does not work for unintercepted faults, but it is better than doing nothing. Signed-off-by:
-
Jan Kiszka authored
Based on Gleb's suggestion: Add a helper kvm_is_linear_rip that matches a given linear RIP against the current one. Use this for guest single-stepping, more users will follow. Signed-off-by:
-
Jan Kiszka authored
Move svm_queue_exception past skip_emulated_instruction to allow calling it later on. Signed-off-by:
-
Jan Kiszka authored
This restores the deferred VCPU kicking before 956f97cf. We need this over -rt as wake_up* requires non-atomic context in this configuration. Signed-off-by:
-
Alexander Graf authored
When we destory a vcpu, we should also make sure to kill all pending timers that could still be up. When not doing this, hrtimers might dereference null pointers trying to call our code. This patch fixes spontanious kernel panics seen after closing VMs. Signed-off-by:
Alexander Graf <alex@csgraf.de> Signed-off-by:
-
Alexander Graf authored
While converting the kzalloc we used to allocate our vcpu struct to vmalloc, I forgot to memset the contents to zeros. That broke quite a lot. This patch memsets it to zero again. Signed-off-by:
-
Jan Kiszka authored
So far user space was not able to save and restore debug registers for migration or after reset. Plug this hole. Signed-off-by:
-
Jan Kiszka authored
The interrupt shadow created by STI or MOV-SS-like operations is part of the VCPU state and must be preserved across migration. Transfer it in the spare padding field of kvm_vcpu_events.interrupt. As a side effect we now have to make vmx_set_interrupt_shadow robust against both shadow types being set. Give MOV SS a higher priority and skip STI in that case to avoid that VMX throws a fault on next entry. Signed-off-by:
-
Jan Kiszka authored
To avoid that user space migrates a pending software exception or interrupt, mask them out on KVM_GET_VCPU_EVENTS. Without this, user space would try to reinject them, and we would have to reconstruct the proper instruction length for VMX event injection. Now the pending event will be reinjected via executing the triggering instruction again. Signed-off-by:
-
Joerg Roedel authored
The nested_svm_intr() function does not execute the vmexit anymore. Therefore we may still be in the nested state after that function ran. This patch changes the nested_svm_intr() function to return wether the irq window could be enabled. Cc: stable@kernel.org Signed-off-by:
-
Gleb Natapov authored
vcpu->run is initialized on vcpu creation and can never be NULL here. Signed-off-by:
Gleb Natapov <gleb@redhat.com> Signed-off-by:
-
Alexander Graf authored
We used to use get_free_pages to allocate our vcpu struct. Unfortunately that call failed on me several times after my machine had a big enough uptime, as memory became too fragmented by then. Fortunately, we don't need it to be page aligned any more! We can just vmalloc it and everything's great. Signed-off-by:
Alexander Graf <agraf@suse.de> Signed-off-by:
-
Alexander Graf authored
We don't need as complex code. I had some thinkos while writing it, figuring I needed to support PPC32 paths on PPC64 which would have required DR=0, but everything just runs fine with DR=1. So let's make the functions simple C call wrappers that reserve some space on the stack for the respective functions to clobber. Fixes out-of-RMA-access (and thus guest FPU loading) on the PS3. Signed-off-by:
-
Alexander Graf authored
We had code to make use of the secondary htab buckets, but kept that disabled because it was unstable when I put it in. I checked again if that's still the case and apparently it was only exposing some instability that was there anyways before. I haven't seen any badness related to usage of secondary htab entries so far. This should speed up guest memory allocations by quite a bit, because we now have more space to put PTEs in. Signed-off-by:
-
Alexander Graf authored
We need to tell userspace that we can emulate paired single instructions. So let's add a capability export. Signed-off-by:
-
Alexander Graf authored
The one big thing about the Gekko is paired singles. Paired singles are an extension to the instruction set, that adds 32 single precision floating point registers (qprs), some SPRs to modify the behavior of paired singled operations and instructions to deal with qprs to the instruction set. Unfortunately, it also changes semantics of existing operations that affect single values in FPRs. In most cases they get mirrored to the coresponding QPR. Thanks to that we need to emulate all FPU operations and all the new paired single operations too. In order to achieve that, we use the just introduced FPU call helpers to call the real FPU whenever the guest wants to modify an FPR. Additionally we also fix up the QPR values along the way. That way we can execute paired single FPU operations without implementing a soft fpu. Signed-off-by:
-
Alexander Graf authored
When we get a program interrupt we usually don't expect it to perform an MMIO operation. But why not? When we emulate paired singles, we can end up loading or storing to an MMIO address - and the handling of those happens in the program interrupt handler. So let's teach the program interrupt handler how to deal with EMULATE_MMIO. Signed-off-by:
-
Alexander Graf authored
The PowerPC specification always lists bits from MSB to LSB. That is really confusing when you're trying to write C code, because it fits in pretty badly with the normal (1 << xx) schemes. So I came up with some nice wrappers that allow to get and set fields in a u64 with bit numbers exactly as given in the spec. That makes the code in KVM and the spec easier comparable. Signed-off-by:
-
Alexander Graf authored
BATs didn't work. Well, they did, but only up to BAT3. As soon as we came to BAT4 the offset calculation was screwed up and we ended up overwriting BAT0-3. Fortunately, Linux hasn't been using BAT4+. It's still a good idea to write correct code though. Signed-off-by:
-
Alexander Graf authored
To emulate paired single instructions, we need to be able to call FPU operations from within the kernel. Since we don't want gcc to spill arbitrary FPU code everywhere, we tell it to use a soft fpu. Since we know we can really call the FPU in safe areas, let's also add some calls that we can later use to actually execute real world FPU operations on the host's FPU. Signed-off-by:
-
Alexander Graf authored
We need to call the ext giveup handlers from code outside of book3s.c. So let's make it non-static. Signed-off-by:
-
Alexander Graf authored
The Book3S KVM implementation contains some helper functions to load and store data from and to virtual addresses. Unfortunately, this helper used to keep the physical address it so nicely found out for us to itself. So let's change that and make it return the physical address it resolved. Signed-off-by:
-
Alexander Graf authored
The Book3S_32 specifications allows for two instructions to modify segment registers: mtsrin and mtsr. Most normal operating systems use mtsrin, because it allows to define which segment it wants to change using a register. But since I was trying to run an embedded guest, it turned out to be using mtsr with hardcoded values. So let's also emulate mtsr. It's a valid instruction after all. Signed-off-by:
-
Alexander Graf authored
There's a typo in the debug ifdef of the book3s_32 mmu emulation. While trying to debug something I stumbled across that and wanted to save anyone after me (or myself later) from having to debug that again. So let's fix the ifdef. Signed-off-by:
-
Alexander Graf authored
There are some situations when we're pretty sure the guest will use the FPU soon. So we can save the churn of going into the guest, finding out it does want to use the FPU and going out again. This patch adds preloading of the FPU when it's reasonable. Signed-off-by:
-
Alexander Graf authored
When we for example get an Altivec interrupt, but our guest doesn't support altivec, we need to inject a program interrupt, not an altivec interrupt. The same goes for paired singles. When an altivec interrupt arrives, we're pretty sure we need to emulate the instruction because it's a paired single operation. So let's make all the ext handlers aware that they need to jump to the program interrupt handler when an extension interrupt arrives that was not supposed to arrive for the guest CPU. Signed-off-by:
-
Alexander Graf authored
The Gekko has some SPR values that differ from other PPC core values and also some additional ones. Let's add support for them in our mfspr/mtspr emulator. Signed-off-by:
-
Alexander Graf authored
The Gekko implements an extension called paired singles. When the guest wants to use that extension, we need to make sure we're not running the host FPU, because all FPU instructions need to get emulated to accomodate for additional operations that occur. This patch adds an hflag to track if we're in paired single mode or not. Signed-off-by:
-
Alexander Graf authored
Emulation of an instruction can have different outcomes. It can succeed, fail, require MMIO, do funky BookE stuff - or it can just realize something's odd and will be fixed the next time around. Exactly that is what EMULATE_AGAIN means. Using that flag we can now tell the caller that nothing happened, but we still want to go back to the guest and see what happens next time we come around. Signed-off-by:
-
Alexander Graf authored
The guest I was trying to get to run uses the LHA and LHAU instructions. Those instructions basically do a load, but also sign extend the result. Since we need to fill our registers by hand when doing MMIO, we also need to sign extend manually. This patch implements sign extended MMIO and the LHA(U) instructions. Signed-off-by:
-
Alexander Graf authored
Right now MMIO access can only happen for GPRs and is at most 32 bit wide. That's actually enough for almost all types of hardware out there. Unfortunately, the guest I was using used FPU writes to MMIO regions, so it ended up writing 64 bit MMIOs using FPRs and QPRs. So let's add code to handle those odd cases too. Signed-off-by:
-
Alexander Graf authored
Modern PowerPCs have a 64 bit wide FPSCR register. Let's accomodate for that and make it 64 bits in our vcpu struct too. Signed-off-by:
-
Alexander Graf authored
The Gekko has GPRs, SPRs and FPRs like normal PowerPC codes, but it also has QPRs which are basically single precision only FPU registers that get used when in paired single mode. The following patches depend on them being around, so let's add the definitions early. Signed-off-by:
-
